Message ID | 1475225317-2815-2-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Shawn, On 09/30/2016 05:48 PM, Shawn Lin wrote: > This patch add dw_mci_runtime_suspend/resume interfaces > and expose it to dw_mci variant driver to support runtime > PM. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > > --- > > drivers/mmc/host/dw_mmc.c | 60 +++++++++++++++++++++++++++++++++++++++++++++-- > drivers/mmc/host/dw_mmc.h | 4 +++- > 2 files changed, 61 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 4fcbc40..54b860e 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -3266,7 +3266,7 @@ EXPORT_SYMBOL(dw_mci_remove); > > > > -#ifdef CONFIG_PM_SLEEP > +#ifdef CONFIG_PM > /* > * TODO: we should probably disable the clock to the card in the suspend path. > */ > @@ -3324,7 +3324,63 @@ int dw_mci_resume(struct dw_mci *host) > return 0; > } > EXPORT_SYMBOL(dw_mci_resume); > -#endif /* CONFIG_PM_SLEEP */ > + > +int dw_mci_runtime_suspend(struct dw_mci *host) > +{ > + printk("dw_mci_runtime_suspend\n"); Maybe I think you will remove this..if you send the patch, not RFC. > + > + if (host->use_dma && host->dma_ops->exit) > + host->dma_ops->exit(host); Can just call dw_mci_suspend() > + > + clk_disable_unprepare(host->ciu_clk); > + > + return 0; > +} > +EXPORT_SYMBOL(dw_mci_runtime_suspend); > + > +int dw_mci_runtime_resume(struct dw_mci *host) > +{ > + int ret = 0; > + int i; Can make one line. > + > + printk("dw_mci_runtime_resume\n"); > + > + ret = clk_prepare_enable(host->ciu_clk); > + if (ret) > + return ret; > + > + if (host->use_dma && host->dma_ops->init) > + host->dma_ops->init(host); > + > + mci_writel(host, FIFOTH, host->fifoth_val); > + host->prev_blksz = 0; > + > + mci_writel(host, TMOUT, 0xFFFFFFFF); > + mci_writel(host, RINTSTS, 0xFFFFFFFF); > + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | > + SDMMC_INT_DATA_OVER | > + SDMMC_INT_TXDR | SDMMC_INT_RXDR | > + DW_MCI_ERROR_FLAGS); > + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); > + > + for (i = 0; i < host->num_slots; i++) { > + struct dw_mci_slot *slot = host->slot[i]; > + > + if (!slot) > + continue; > + > + if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) { > + dw_mci_set_ios(slot->mmc, &slot->mmc->ios); > + dw_mci_setup_bus(slot, true); > + } > + } > + > + dw_mci_enable_cd(host); Some part of this function can be reused with codes in dw_mci_resume(). Best Regards, Jaehoon Chung > + > + return ret; > +} > +EXPORT_SYMBOL(dw_mci_runtime_resume); > +#endif /* CONFIG_PM */ > > static int __init dw_mci_init(void) > { > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index e8cd2de..baa7261 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -234,9 +234,11 @@ > > extern int dw_mci_probe(struct dw_mci *host); > extern void dw_mci_remove(struct dw_mci *host); > -#ifdef CONFIG_PM_SLEEP > +#ifdef CONFIG_PM > extern int dw_mci_suspend(struct dw_mci *host); > extern int dw_mci_resume(struct dw_mci *host); > +extern int dw_mci_runtime_suspend(struct dw_mci *host); > +extern int dw_mci_runtime_resume(struct dw_mci *host); > #endif > > /** >
在 2016/10/7 12:12, Jaehoon Chung 写道: > Hi Shawn, > > On 09/30/2016 05:48 PM, Shawn Lin wrote: >> This patch add dw_mci_runtime_suspend/resume interfaces >> and expose it to dw_mci variant driver to support runtime >> PM. >> >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >> >> --- >> >> drivers/mmc/host/dw_mmc.c | 60 +++++++++++++++++++++++++++++++++++++++++++++-- >> drivers/mmc/host/dw_mmc.h | 4 +++- >> 2 files changed, 61 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 4fcbc40..54b860e 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -3266,7 +3266,7 @@ EXPORT_SYMBOL(dw_mci_remove); >> >> >> >> -#ifdef CONFIG_PM_SLEEP >> +#ifdef CONFIG_PM >> /* >> * TODO: we should probably disable the clock to the card in the suspend path. >> */ >> @@ -3324,7 +3324,63 @@ int dw_mci_resume(struct dw_mci *host) >> return 0; >> } >> EXPORT_SYMBOL(dw_mci_resume); >> -#endif /* CONFIG_PM_SLEEP */ >> + >> +int dw_mci_runtime_suspend(struct dw_mci *host) >> +{ >> + printk("dw_mci_runtime_suspend\n"); > > Maybe I think you will remove this..if you send the patch, not RFC. yep, it just for me to print info for testing the rpm governer. I will remove this when sending non-RFC one. > >> + >> + if (host->use_dma && host->dma_ops->exit) >> + host->dma_ops->exit(host); > > Can just call dw_mci_suspend() If we deploy rpm properly, we don't need system PM at all.. To be frank, I was wanna remove dw_mci_suspend/resume pairs, and only leave the runtime pairs here. As you could see that runtime PM and system PM does the same thing, so personally I realize we should help dw_mmc variant drivers migrate to use runtime PM. That is what I did for dw_mmc-rockchip. If we are not sure should we enable rpm for i.e., exynos, or k3, we don't add pm_runtime_* for them for the first step and leave it to the owners/users to make the decision. The following code should be enough to help we achieve the first step. static const struct dev_pm_ops dw_mci_XXXXXX_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, dw_mci_runtime_resume, NULL) }; If there are some special ops for system PM like exynos, we could wrap new dw_mci_exynos_runtime_resume there.. The same for dw_mci_resume. What's your opinion? Seems Ulf was too busy to make comments here. But I believe it is in the right direction. > >> + >> + clk_disable_unprepare(host->ciu_clk); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(dw_mci_runtime_suspend); >> + >> +int dw_mci_runtime_resume(struct dw_mci *host) >> +{ >> + int ret = 0; >> + int i; > > Can make one line. > >> + >> + printk("dw_mci_runtime_resume\n"); >> + >> + ret = clk_prepare_enable(host->ciu_clk); >> + if (ret) >> + return ret; >> + >> + if (host->use_dma && host->dma_ops->init) >> + host->dma_ops->init(host); >> + >> + mci_writel(host, FIFOTH, host->fifoth_val); >> + host->prev_blksz = 0; >> + >> + mci_writel(host, TMOUT, 0xFFFFFFFF); >> + mci_writel(host, RINTSTS, 0xFFFFFFFF); >> + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | >> + SDMMC_INT_DATA_OVER | >> + SDMMC_INT_TXDR | SDMMC_INT_RXDR | >> + DW_MCI_ERROR_FLAGS); >> + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); >> + >> + for (i = 0; i < host->num_slots; i++) { >> + struct dw_mci_slot *slot = host->slot[i]; >> + >> + if (!slot) >> + continue; >> + >> + if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) { >> + dw_mci_set_ios(slot->mmc, &slot->mmc->ios); >> + dw_mci_setup_bus(slot, true); >> + } >> + } >> + >> + dw_mci_enable_cd(host); > > Some part of this function can be reused with codes in dw_mci_resume(). > > Best Regards, > Jaehoon Chung > >> + >> + return ret; >> +} >> +EXPORT_SYMBOL(dw_mci_runtime_resume); >> +#endif /* CONFIG_PM */ >> >> static int __init dw_mci_init(void) >> { >> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h >> index e8cd2de..baa7261 100644 >> --- a/drivers/mmc/host/dw_mmc.h >> +++ b/drivers/mmc/host/dw_mmc.h >> @@ -234,9 +234,11 @@ >> >> extern int dw_mci_probe(struct dw_mci *host); >> extern void dw_mci_remove(struct dw_mci *host); >> -#ifdef CONFIG_PM_SLEEP >> +#ifdef CONFIG_PM >> extern int dw_mci_suspend(struct dw_mci *host); >> extern int dw_mci_resume(struct dw_mci *host); >> +extern int dw_mci_runtime_suspend(struct dw_mci *host); >> +extern int dw_mci_runtime_resume(struct dw_mci *host); >> #endif >> >> /** >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 4fcbc40..54b860e 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -3266,7 +3266,7 @@ EXPORT_SYMBOL(dw_mci_remove); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM /* * TODO: we should probably disable the clock to the card in the suspend path. */ @@ -3324,7 +3324,63 @@ int dw_mci_resume(struct dw_mci *host) return 0; } EXPORT_SYMBOL(dw_mci_resume); -#endif /* CONFIG_PM_SLEEP */ + +int dw_mci_runtime_suspend(struct dw_mci *host) +{ + printk("dw_mci_runtime_suspend\n"); + + if (host->use_dma && host->dma_ops->exit) + host->dma_ops->exit(host); + + clk_disable_unprepare(host->ciu_clk); + + return 0; +} +EXPORT_SYMBOL(dw_mci_runtime_suspend); + +int dw_mci_runtime_resume(struct dw_mci *host) +{ + int ret = 0; + int i; + + printk("dw_mci_runtime_resume\n"); + + ret = clk_prepare_enable(host->ciu_clk); + if (ret) + return ret; + + if (host->use_dma && host->dma_ops->init) + host->dma_ops->init(host); + + mci_writel(host, FIFOTH, host->fifoth_val); + host->prev_blksz = 0; + + mci_writel(host, TMOUT, 0xFFFFFFFF); + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | + SDMMC_INT_DATA_OVER | + SDMMC_INT_TXDR | SDMMC_INT_RXDR | + DW_MCI_ERROR_FLAGS); + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + + if (!slot) + continue; + + if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) { + dw_mci_set_ios(slot->mmc, &slot->mmc->ios); + dw_mci_setup_bus(slot, true); + } + } + + dw_mci_enable_cd(host); + + return ret; +} +EXPORT_SYMBOL(dw_mci_runtime_resume); +#endif /* CONFIG_PM */ static int __init dw_mci_init(void) { diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index e8cd2de..baa7261 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -234,9 +234,11 @@ extern int dw_mci_probe(struct dw_mci *host); extern void dw_mci_remove(struct dw_mci *host); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM extern int dw_mci_suspend(struct dw_mci *host); extern int dw_mci_resume(struct dw_mci *host); +extern int dw_mci_runtime_suspend(struct dw_mci *host); +extern int dw_mci_runtime_resume(struct dw_mci *host); #endif /**
This patch add dw_mci_runtime_suspend/resume interfaces and expose it to dw_mci variant driver to support runtime PM. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- drivers/mmc/host/dw_mmc.c | 60 +++++++++++++++++++++++++++++++++++++++++++++-- drivers/mmc/host/dw_mmc.h | 4 +++- 2 files changed, 61 insertions(+), 3 deletions(-)