| Message ID | 1476017358-26143-1-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2016年10月09日 20:49, Shawn Lin wrote: > There is no necessary to print warning agian and > again if we don't add rockchip,grf for dt, otherwise > I saw the following log when doning suspend-2-resume. > We only need to print it once when parsing dt. It looks > quite trivial but the log is apparently verbose. > > [ 26.615415] PM: early resume of devices complete after 1.539 msecs > [ 26.622002] rk_tsadcv2_initialize: Missing rockchip,grf property > [ 26.629359] rk_gmac-dwmac ff290000.ethernet: init for RGMII > [ 26.639794] PM: resume of devices complete after 18.109 msecs > [ 26.646925] Restarting tasks ... done. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com> > --- > > drivers/thermal/rockchip_thermal.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c > index e227a9f..b811b0f 100644 > --- a/drivers/thermal/rockchip_thermal.c > +++ b/drivers/thermal/rockchip_thermal.c > @@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs, > regs + TSADCV2_AUTO_PERIOD_HT); > writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, > regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); > - > - if (IS_ERR(grf)) { > - pr_warn("%s: Missing rockchip,grf property\n", __func__); > - return; > - } > } > > /** > @@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device *dev, > * need this property. > */ > thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); > + if (IS_ERR(thermal->grf)) > + dev_warn(dev, "Missing rockchip,grf property\n"); > > return 0; > }
Am Sonntag, 9. Oktober 2016, 20:49:18 CEST schrieb Shawn Lin: > There is no necessary to print warning agian and It is not necessary to print a warning again and ... > again if we don't add rockchip,grf for dt, otherwise > I saw the following log when doning suspend-2-resume. ^ doing > We only need to print it once when parsing dt. It looks > quite trivial but the log is apparently verbose. > > [ 26.615415] PM: early resume of devices complete after 1.539 msecs > [ 26.622002] rk_tsadcv2_initialize: Missing rockchip,grf property > [ 26.629359] rk_gmac-dwmac ff290000.ethernet: init for RGMII > [ 26.639794] PM: resume of devices complete after 18.109 msecs > [ 26.646925] Restarting tasks ... done. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > --- > > drivers/thermal/rockchip_thermal.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/thermal/rockchip_thermal.c > b/drivers/thermal/rockchip_thermal.c index e227a9f..b811b0f 100644 > --- a/drivers/thermal/rockchip_thermal.c > +++ b/drivers/thermal/rockchip_thermal.c > @@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, > void __iomem *regs, regs + TSADCV2_AUTO_PERIOD_HT); > writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, > regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); > - > - if (IS_ERR(grf)) { > - pr_warn("%s: Missing rockchip,grf property\n", __func__); > - return; > - } dropping the pr_warn here is ok, as the v2 tsadc does not access it anyway > } > > /** > @@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device > *dev, * need this property. > */ > thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); > + if (IS_ERR(thermal->grf)) > + dev_warn(dev, "Missing rockchip,grf property\n"); but I'm not sure if we need this warning here. As said above v2-tsadc does not need it at all and the v3 tsadc seems to work around a missing grf regmap? So maybe don't do any warning at all or something like that? Btw. it also seems like the binding txt document is missing an entry for the rockchip,grf property. So maybe you could do another patch to add that optional property to the binding doc? Heiko
在 2016/10/11 4:28, Heiko Stuebner 写道: > Am Sonntag, 9. Oktober 2016, 20:49:18 CEST schrieb Shawn Lin: >> There is no necessary to print warning agian and > > It is not necessary to print a warning again and ... > Ah, actually I mean 'necessity', will fix it anyway. >> again if we don't add rockchip,grf for dt, otherwise >> I saw the following log when doning suspend-2-resume. > ^ doing sure. > >> We only need to print it once when parsing dt. It looks >> quite trivial but the log is apparently verbose. >> >> [ 26.615415] PM: early resume of devices complete after 1.539 msecs >> [ 26.622002] rk_tsadcv2_initialize: Missing rockchip,grf property >> [ 26.629359] rk_gmac-dwmac ff290000.ethernet: init for RGMII >> [ 26.639794] PM: resume of devices complete after 18.109 msecs >> [ 26.646925] Restarting tasks ... done. >> >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >> --- >> >> drivers/thermal/rockchip_thermal.c | 7 ++----- >> 1 file changed, 2 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/thermal/rockchip_thermal.c >> b/drivers/thermal/rockchip_thermal.c index e227a9f..b811b0f 100644 >> --- a/drivers/thermal/rockchip_thermal.c >> +++ b/drivers/thermal/rockchip_thermal.c >> @@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, >> void __iomem *regs, regs + TSADCV2_AUTO_PERIOD_HT); >> writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, >> regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); >> - >> - if (IS_ERR(grf)) { >> - pr_warn("%s: Missing rockchip,grf property\n", __func__); >> - return; >> - } > > dropping the pr_warn here is ok, as the v2 tsadc does not access it anyway > >> } >> >> /** >> @@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device >> *dev, * need this property. >> */ >> thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); >> + if (IS_ERR(thermal->grf)) >> + dev_warn(dev, "Missing rockchip,grf property\n"); > > but I'm not sure if we need this warning here. As said above v2-tsadc does not > need it at all and the v3 tsadc seems to work around a missing grf regmap? I didn't look into the driver but just want to drop the pr_warn there. And yes, v2-tsadc doesn't use it at all and v3 does work around if missing grf there. I think it it okay to carry on the log here since it would be fine to cast a warning for folks to debug. Also we could see that rockchip_configure_from_dt actually cast some similar warnings there when failing to parse some properties properly which isn't critical, i.e hw-tshut-temp, hw-tshut-mode, etc.. And that should be harmless. :) > > So maybe don't do any warning at all or something like that? > > Btw. it also seems like the binding txt document is missing an entry for the > rockchip,grf property. So maybe you could do another patch to add that > optional property to the binding doc? I will. > > > Heiko > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip >
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index e227a9f..b811b0f 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs, regs + TSADCV2_AUTO_PERIOD_HT); writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); - - if (IS_ERR(grf)) { - pr_warn("%s: Missing rockchip,grf property\n", __func__); - return; - } } /** @@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device *dev, * need this property. */ thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(thermal->grf)) + dev_warn(dev, "Missing rockchip,grf property\n"); return 0; }
There is no necessary to print warning agian and again if we don't add rockchip,grf for dt, otherwise I saw the following log when doning suspend-2-resume. We only need to print it once when parsing dt. It looks quite trivial but the log is apparently verbose. [ 26.615415] PM: early resume of devices complete after 1.539 msecs [ 26.622002] rk_tsadcv2_initialize: Missing rockchip,grf property [ 26.629359] rk_gmac-dwmac ff290000.ethernet: init for RGMII [ 26.639794] PM: resume of devices complete after 18.109 msecs [ 26.646925] Restarting tasks ... done. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- drivers/thermal/rockchip_thermal.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)