Revert "dmaengine: pxa_dma: add support for legacy transition"

Commit Message

Robert Jarzmik Oct. 18, 2016, 6:46 a.m. UTC

This reverts commit c91134d9194478144ba579ca6efeddf628055650.

The conversion of the pxa architecture is now finished for all
drivers, so this functions has fullfilled its purpose and can
now be removed.

Signed-off-by: Robert Jarzmik <[e-mail]>
---
 drivers/dma/pxa_dma.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

Comments

Arnd Bergmann Oct. 18, 2016, 8:57 a.m. UTC | #1

On Tuesday, October 18, 2016 8:46:32 AM CEST Robert Jarzmik wrote:
> This reverts commit c91134d9194478144ba579ca6efeddf628055650.
> 
> The conversion of the pxa architecture is now finished for all
> drivers, so this functions has fullfilled its purpose and can
> now be removed.
> 
> Signed-off-by: Robert Jarzmik <[e-mail]>

Nice!

That reminds me, do you have plans to work on the conversion away from
IORESOURCE_DMA and pxad_filter_fn towards the dma_slave_map interface?

I see that all pxa drivers already use dma_request_slave_channel_compat,
so this should be fairly straightforward to do, changing only the
driver and the arch/arm/mach-pxa/devices.c file.

Acked-by: Arnd Bergmann <[e-mail]>

Vinod Koul Oct. 18, 2016, 2:45 p.m. UTC | #2

On Tue, Oct 18, 2016 at 08:46:32AM +0200, Robert Jarzmik wrote:
> This reverts commit c91134d9194478144ba579ca6efeddf628055650.
> 
> The conversion of the pxa architecture is now finished for all
> drivers, so this functions has fullfilled its purpose and can
> now be removed.

Applied, thanks

Robert Jarzmik Oct. 20, 2016, 5:34 p.m. UTC | #3

Arnd Bergmann <[e-mail]> writes:

> On Tuesday, October 18, 2016 8:46:32 AM CEST Robert Jarzmik wrote:
>> This reverts commit c91134d9194478144ba579ca6efeddf628055650.
>> 
>> The conversion of the pxa architecture is now finished for all
>> drivers, so this functions has fullfilled its purpose and can
>> now be removed.
>> 
>> Signed-off-by: Robert Jarzmik <[e-mail]>
>
> Nice!
>
> That reminds me, do you have plans to work on the conversion away from
> IORESOURCE_DMA and pxad_filter_fn towards the dma_slave_map interface?
>
> I see that all pxa drivers already use dma_request_slave_channel_compat,
> so this should be fairly straightforward to do, changing only the
> driver and the arch/arm/mach-pxa/devices.c file.

I didn't so far, as I wasn't aware of this interface, but I'll gladly put that
on my todo list.

Cheers.

Patch

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 3f56f9ca4482..b53fb618bbf6 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -413,15 +413,6 @@  static inline void pxad_init_debugfs(struct pxad_device *pdev) {}
 static inline void pxad_cleanup_debugfs(struct pxad_device *pdev) {}
 #endif
 
-/*
- * In the transition phase where legacy pxa handling is done at the same time as
- * mmp_dma, the DMA physical channel split between the 2 DMA providers is done
- * through legacy_reserved. Legacy code reserves DMA channels by settings
- * corresponding bits in legacy_reserved.
- */
-static u32 legacy_reserved;
-static u32 legacy_unavailable;
-
 static struct pxad_phy *lookup_phy(struct pxad_chan *pchan)
 {
 	int prio, i;
@@ -442,14 +433,10 @@  static struct pxad_phy *lookup_phy(struct pxad_chan *pchan)
 		for (i = 0; i < pdev->nr_chans; i++) {
 			if (prio != (i & 0xf) >> 2)
 				continue;
-			if ((i < 32) && (legacy_reserved & BIT(i)))
-				continue;
 			phy = &pdev->phys[i];
 			if (!phy->vchan) {
 				phy->vchan = pchan;
 				found = phy;
-				if (i < 32)
-					legacy_unavailable |= BIT(i);
 				goto out_unlock;
 			}
 		}
@@ -469,7 +456,6 @@  static void pxad_free_phy(struct pxad_chan *chan)
 	struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
 	unsigned long flags;
 	u32 reg;
-	int i;
 
 	dev_dbg(&chan->vc.chan.dev->device,
 		"%s(): freeing\n", __func__);
@@ -483,9 +469,6 @@  static void pxad_free_phy(struct pxad_chan *chan)
 	}
 
 	spin_lock_irqsave(&pdev->phy_lock, flags);
-	for (i = 0; i < 32; i++)
-		if (chan->phy == &pdev->phys[i])
-			legacy_unavailable &= ~BIT(i);
 	chan->phy->vchan = NULL;
 	chan->phy = NULL;
 	spin_unlock_irqrestore(&pdev->phy_lock, flags);
@@ -739,8 +722,6 @@  static irqreturn_t pxad_int_handler(int irq, void *dev_id)
 		i = __ffs(dint);
 		dint &= (dint - 1);
 		phy = &pdev->phys[i];
-		if ((i < 32) && (legacy_reserved & BIT(i)))
-			continue;
 		if (pxad_chan_handler(irq, phy) == IRQ_HANDLED)
 			ret = IRQ_HANDLED;
 	}
@@ -1522,15 +1503,6 @@  bool pxad_filter_fn(struct dma_chan *chan, void *param)
 }
 EXPORT_SYMBOL_GPL(pxad_filter_fn);
 
-int pxad_toggle_reserved_channel(int legacy_channel)
-{
-	if (legacy_unavailable & (BIT(legacy_channel)))
-		return -EBUSY;
-	legacy_reserved ^= BIT(legacy_channel);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pxad_toggle_reserved_channel);
-
 module_platform_driver(pxad_driver);
 
 MODULE_DESCRIPTION("Marvell PXA Peripheral DMA Driver");