| Message ID | 87twd1vzc5.fsf@aikidev.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Dienstag, 27. September 2016, 13:53:46 CEST schrieb Vagrant Cascadian: > This essentially mimics what was done with rk3288-veyron-minnie in > commit 984926781122f034d5bc9962815d135b6c4a8e1d. > > The eMMC of the speedy Chromebook also appears to need the same tuning > workaround, as it frequently fails to recognize the eMMC without it. > > Signed-off-by: Vagrant Cascadian <vagrantc@aikidev.net> applied as fix for 4.9. Your mail client mangled that patch a lot (tabs etc), so it didn't apply cleanly. As it is a quite small one, I fixed that up myself, but please try to make your mail client send correct patches in the future or use git send-email :-) Thanks Heiko
Hi, Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit : > This essentially mimics what was done with rk3288-veyron-minnie in > commit 984926781122f034d5bc9962815d135b6c4a8e1d. > > The eMMC of the speedy Chromebook also appears to need the same tuning > workaround, as it frequently fails to recognize the eMMC without it. I have a device where (without this patch) eMMC sometimes fails, with: [ 3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 175 [ 3.571742] mmc2: new HS200 MMC card at address 0001 [ 3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB [ 3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB [ 3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB [ 3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB [ 3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 And sometimes works, with: [ 3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 176 [ 3.491093] mmc2: new HS200 MMC card at address 0001 [ 3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB [ 3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB [ 3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB [ 3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB [ 3.493548] mmcblk2: p1 p2 However, with this change, it always fails, with: [ 3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.333174] mmc2: error -110 whilst initialising MMC card I don't have so much time to investigate this issue, but it's clear that this patch doesn't fix the issue (and actually worsens it) for my device. Cheers! > Signed-off-by: Vagrant Cascadian <vagrantc@aikidev.net> > --- > Changes in v2: > - Added Signed-off-by. > > arch/arm/boot/dts/rk3288-veyron-speedy.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts > b/arch/arm/boot/dts/rk3288-veyron-speedy.dts > index a0d033f..500fd18 100644 > --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts > +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts > @@ -124,6 +124,11 @@ > &sdmmc_bus4>; > }; > > + > +&emmc { > + /delete-property/mmc-hs200-1_8v; > +}; > + > &vcc_5v { > enable-active-high; > gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski: > Hi, > > Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit : > > This essentially mimics what was done with rk3288-veyron-minnie in > > commit 984926781122f034d5bc9962815d135b6c4a8e1d. > > > > The eMMC of the speedy Chromebook also appears to need the same tuning > > workaround, as it frequently fails to recognize the eMMC without it. > > I have a device where (without this patch) eMMC sometimes fails, with: > [ 3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to > 175 [ 3.571742] mmc2: new HS200 MMC card at address 0001 > [ 3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB > [ 3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB > [ 3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB > [ 3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB > [ 3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd > response 0x900, card status 0x0 > > And sometimes works, with: > [ 3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to > 176 [ 3.491093] mmc2: new HS200 MMC card at address 0001 > [ 3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB > [ 3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB > [ 3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB > [ 3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB > [ 3.493548] mmcblk2: p1 p2 > > However, with this change, it always fails, with: > [ 3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req > 52000000Hz, actual 50000000HZ div = 0) [ 3.333174] mmc2: error -110 > whilst initialising MMC card > > I don't have so much time to investigate this issue, but it's clear that > this patch doesn't fix the issue (and actually worsens it) for my device. thanks for the heads up. As discussed on IRC we now have varying reports of the emmc working or not working with and without that patch applied. So it's not really a bandaid fix and I've thus dropped this patch again. Still hoping someone will find the source of the problem somewhere :-) Heiko
Hi, Le mardi 18 octobre 2016 à 11:21 +0200, Heiko Stübner a écrit : > Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski: > > > > Hi, > > > > Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit : > > > > > > This essentially mimics what was done with rk3288-veyron-minnie in > > > commit 984926781122f034d5bc9962815d135b6c4a8e1d. > > > > > > The eMMC of the speedy Chromebook also appears to need the same tuning > > > workaround, as it frequently fails to recognize the eMMC without it. > > > > I have a device where (without this patch) eMMC sometimes fails, with: > > [ 3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to > > 175 [ 3.571742] mmc2: new HS200 MMC card at address 0001 > > [ 3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB > > [ 3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB > > [ 3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB > > [ 3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB > > [ 3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd > > response 0x900, card status 0x0 > > > > And sometimes works, with: > > [ 3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to > > 176 [ 3.491093] mmc2: new HS200 MMC card at address 0001 > > [ 3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB > > [ 3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB > > [ 3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB > > [ 3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB > > [ 3.493548] mmcblk2: p1 p2 > > > > However, with this change, it always fails, with: > > [ 3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req > > 52000000Hz, actual 50000000HZ div = 0) [ 3.333174] mmc2: error -110 > > whilst initialising MMC card > > > > I don't have so much time to investigate this issue, but it's clear that > > this patch doesn't fix the issue (and actually worsens it) for my device. > > thanks for the heads up. > > As discussed on IRC we now have varying reports of the emmc working or not > working with and without that patch applied. So it's not really a bandaid fix > and I've thus dropped this patch again. Thanks for dropping it! For the record, my eMMC shows up as: mmcblk2: mmc2:0001 HAG2e 14.7 GiB Maybe it could help to share what each tested device reports as eMMC model and associate that with the current behavior, in spite of getting a clearer idea of what issue affects what model. > Still hoping someone will find the source of the problem somewhere :-) I have started investigating the issue, but did not discover anything significant yet. I hope I'll be able to figure it out! Cheers!
On 2016-10-18, Paul Kocialkowski wrote: > Le mardi 18 octobre 2016 à 11:21 +0200, Heiko Stübner a écrit : >> Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski: >> > Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit : >> > > >> > > This essentially mimics what was done with rk3288-veyron-minnie in >> > > commit 984926781122f034d5bc9962815d135b6c4a8e1d. >> > > >> > > The eMMC of the speedy Chromebook also appears to need the same tuning >> > > workaround, as it frequently fails to recognize the eMMC without it. >> > >> > I have a device where (without this patch) eMMC sometimes fails, with: >> > [ 3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to >> > 175 [ 3.571742] mmc2: new HS200 MMC card at address 0001 >> > [ 3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB >> > [ 3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB >> > [ 3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB >> > [ 3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB >> > [ 3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd >> > response 0x900, card status 0x0 >> > And sometimes works, with: >> > [ 3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to >> > 176 [ 3.491093] mmc2: new HS200 MMC card at address 0001 >> > [ 3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB >> > [ 3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB >> > [ 3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB >> > [ 3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB >> > [ 3.493548] mmcblk2: p1 p2 This is similar behavior to my veyron-speedy. Here are several boot logs From running 4.8.0-rc7, with some failures and some successes: https://cascadia.aikidev.net/~vagrant/veyron-speedy/ >> > However, with this change, it always fails, with: >> > [ 3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req >> > 52000000Hz, actual 50000000HZ div = 0) [ 3.333174] mmc2: error -110 >> > whilst initialising MMC card >> > >> > I don't have so much time to investigate this issue, but it's clear that >> > this patch doesn't fix the issue (and actually worsens it) for my device. Well, that makes things more complicated. >> As discussed on IRC we now have varying reports of the emmc working or not >> working with and without that patch applied. So it's not really a bandaid fix >> and I've thus dropped this patch again. > > Thanks for dropping it! For the record, my eMMC shows up as: > mmcblk2: mmc2:0001 HAG2e 14.7 GiB Mine looks similar, although reporting as mmc0: [ 3.166550] mmcblk0: mmc0:0001 HAG2e 14.7 GiB > Maybe it could help to share what each tested device reports as eMMC model and > associate that with the current behavior, in spite of getting a clearer idea of > what issue affects what model. FWIW, I'm using a veyron-speedy with 4GB of ram, not sure what other information might be useful to distinguish between different models. On the bottom of the case, it claims to be a C201P. Near the serial, it's marked as C201PA-DS02-LG. live well, vagrant
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a0d033f..500fd18 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -124,6 +124,11 @@ &sdmmc_bus4>; }; + +&emmc { + /delete-property/mmc-hs200-1_8v; +}; + &vcc_5v { enable-active-high; gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
This essentially mimics what was done with rk3288-veyron-minnie in commit 984926781122f034d5bc9962815d135b6c4a8e1d. The eMMC of the speedy Chromebook also appears to need the same tuning workaround, as it frequently fails to recognize the eMMC without it. Signed-off-by: Vagrant Cascadian <vagrantc@aikidev.net> --- Changes in v2: - Added Signed-off-by. arch/arm/boot/dts/rk3288-veyron-speedy.dts | 5 +++++ 1 file changed, 5 insertions(+)