@@ -19,7 +19,7 @@ block-obj-$(CONFIG_CURL) += curl.o
block-obj-$(CONFIG_RBD) += rbd.o
block-obj-$(CONFIG_GLUSTERFS) += gluster.o
block-obj-$(CONFIG_ARCHIPELAGO) += archipelago.o
-block-obj-$(CONFIG_LIBSSH2) += ssh.o
+block-obj-$(CONFIG_LIBSSH) += ssh.o
block-obj-y += accounting.o dirty-bitmap.o
block-obj-y += write-threshold.o
block-obj-y += backup.o
@@ -38,8 +38,8 @@ rbd.o-cflags := $(RBD_CFLAGS)
rbd.o-libs := $(RBD_LIBS)
gluster.o-cflags := $(GLUSTERFS_CFLAGS)
gluster.o-libs := $(GLUSTERFS_LIBS)
-ssh.o-cflags := $(LIBSSH2_CFLAGS)
-ssh.o-libs := $(LIBSSH2_LIBS)
+ssh.o-cflags := $(LIBSSH_CFLAGS)
+ssh.o-libs := $(LIBSSH_LIBS)
archipelago.o-libs := $(ARCHIPELAGO_LIBS)
block-obj-$(if $(CONFIG_BZIP2),m,n) += dmg-bz2.o
dmg-bz2.o-libs := $(BZIP2_LIBS)
@@ -24,8 +24,8 @@
#include "qemu/osdep.h"
-#include <libssh2.h>
-#include <libssh2_sftp.h>
+#include <libssh/libssh.h>
+#include <libssh/sftp.h>
#include "block/block_int.h"
#include "qapi/error.h"
@@ -38,14 +38,12 @@
/* DEBUG_SSH=1 enables the DPRINTF (debugging printf) statements in
* this block driver code.
*
- * TRACE_LIBSSH2=<bitmask> enables tracing in libssh2 itself. Note
- * that this requires that libssh2 was specially compiled with the
- * `./configure --enable-debug' option, so most likely you will have
- * to compile it yourself. The meaning of <bitmask> is described
- * here: http://www.libssh2.org/libssh2_trace.html
+ * TRACE_LIBSSH=<level> enables tracing in libssh itself.
+ * The meaning of <level> is described here:
+ * http://api.libssh.org/master/group__libssh__log.html
*/
#define DEBUG_SSH 0
-#define TRACE_LIBSSH2 0 /* or try: LIBSSH2_TRACE_SFTP */
+#define TRACE_LIBSSH 0 /* see: SSH_LOG_* */
#define DPRINTF(fmt, ...) \
do { \
@@ -60,50 +58,39 @@ typedef struct BDRVSSHState {
CoMutex lock;
/* SSH connection. */
- int sock; /* socket */
- LIBSSH2_SESSION *session; /* ssh session */
- LIBSSH2_SFTP *sftp; /* sftp session */
- LIBSSH2_SFTP_HANDLE *sftp_handle; /* sftp remote file handle */
+ ssh_session session; /* ssh session */
+ sftp_session sftp; /* sftp session */
+ sftp_file sftp_handle; /* sftp remote file handle */
- /* See ssh_seek() function below. */
- int64_t offset;
- bool offset_op_read;
-
- /* File attributes at open. We try to keep the .filesize field
+ /* File attributes at open. We try to keep the .size field
* updated if it changes (eg by writing at the end of the file).
*/
- LIBSSH2_SFTP_ATTRIBUTES attrs;
+ sftp_attributes attrs;
/* Used to warn if 'flush' is not supported. */
- char *hostport;
bool unsafe_flush_warning;
} BDRVSSHState;
static void ssh_state_init(BDRVSSHState *s)
{
memset(s, 0, sizeof *s);
- s->sock = -1;
- s->offset = -1;
qemu_co_mutex_init(&s->lock);
}
static void ssh_state_free(BDRVSSHState *s)
{
- g_free(s->hostport);
+ if (s->attrs) {
+ sftp_attributes_free(s->attrs);
+ }
if (s->sftp_handle) {
- libssh2_sftp_close(s->sftp_handle);
+ sftp_close(s->sftp_handle);
}
if (s->sftp) {
- libssh2_sftp_shutdown(s->sftp);
+ sftp_free(s->sftp);
}
if (s->session) {
- libssh2_session_disconnect(s->session,
- "from qemu ssh client: "
- "user closed the connection");
- libssh2_session_free(s->session);
- }
- if (s->sock >= 0) {
- close(s->sock);
+ ssh_disconnect(s->session);
+ ssh_free(s->session);
}
}
@@ -118,13 +105,13 @@ session_error_setg(Error **errp, BDRVSSHState *s, const char *fs, ...)
va_end(args);
if (s->session) {
- char *ssh_err;
+ const char *ssh_err;
int ssh_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- error_setg(errp, "%s: %s (libssh2 error code: %d)",
+ /* This is not an errno. See <libssh/libssh.h>. */
+ ssh_err = ssh_get_error(s->session);
+ ssh_err_code = ssh_get_error_code(s->session);
+ error_setg(errp, "%s: %s (libssh error code: %d)",
msg, ssh_err, ssh_err_code);
} else {
error_setg(errp, "%s", msg);
@@ -143,19 +130,14 @@ sftp_error_setg(Error **errp, BDRVSSHState *s, const char *fs, ...)
va_end(args);
if (s->sftp) {
- char *ssh_err;
- int ssh_err_code;
- unsigned long sftp_err_code;
+ int sftp_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- /* See <libssh2_sftp.h>. */
- sftp_err_code = libssh2_sftp_last_error((s)->sftp);
+ /* This is not an errno. See <libssh/sftp.h>. */
+ sftp_err_code = sftp_get_error(s->sftp);
error_setg(errp,
- "%s: %s (libssh2 error code: %d, sftp error code: %lu)",
- msg, ssh_err, ssh_err_code, sftp_err_code);
+ "%s (sftp error code: %d)",
+ msg, sftp_err_code);
} else {
error_setg(errp, "%s", msg);
}
@@ -171,18 +153,13 @@ sftp_error_report(BDRVSSHState *s, const char *fs, ...)
error_vprintf(fs, args);
if ((s)->sftp) {
- char *ssh_err;
- int ssh_err_code;
- unsigned long sftp_err_code;
+ int sftp_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- /* See <libssh2_sftp.h>. */
- sftp_err_code = libssh2_sftp_last_error((s)->sftp);
+ /* This is not an errno. See <libssh/sftp.h>. */
+ sftp_err_code = sftp_get_error(s->sftp);
- error_printf(": %s (libssh2 error code: %d, sftp error code: %lu)",
- ssh_err, ssh_err_code, sftp_err_code);
+ error_printf(": (sftp error code: %d)",
+ sftp_err_code);
}
va_end(args);
@@ -272,68 +249,41 @@ static void ssh_parse_filename(const char *filename, QDict *options,
static int check_host_key_knownhosts(BDRVSSHState *s,
const char *host, int port, Error **errp)
{
- const char *home;
- char *knh_file = NULL;
- LIBSSH2_KNOWNHOSTS *knh = NULL;
- struct libssh2_knownhost *found;
- int ret, r;
- const char *hostkey;
- size_t len;
- int type;
+ int ret;
+ int state;
- hostkey = libssh2_session_hostkey(s->session, &len, &type);
- if (!hostkey) {
- ret = -EINVAL;
- session_error_setg(errp, s, "failed to read remote host key");
- goto out;
- }
+ state = ssh_is_server_known(s->session);
- knh = libssh2_knownhost_init(s->session);
- if (!knh) {
- ret = -EINVAL;
- session_error_setg(errp, s,
- "failed to initialize known hosts support");
- goto out;
- }
-
- home = getenv("HOME");
- if (home) {
- knh_file = g_strdup_printf("%s/.ssh/known_hosts", home);
- } else {
- knh_file = g_strdup_printf("/root/.ssh/known_hosts");
- }
-
- /* Read all known hosts from OpenSSH-style known_hosts file. */
- libssh2_knownhost_readfile(knh, knh_file, LIBSSH2_KNOWNHOST_FILE_OPENSSH);
-
- r = libssh2_knownhost_checkp(knh, host, port, hostkey, len,
- LIBSSH2_KNOWNHOST_TYPE_PLAIN|
- LIBSSH2_KNOWNHOST_KEYENC_RAW,
- &found);
- switch (r) {
- case LIBSSH2_KNOWNHOST_CHECK_MATCH:
+ switch (state) {
+ case SSH_SERVER_KNOWN_OK:
/* OK */
- DPRINTF("host key OK: %s", found->key);
break;
- case LIBSSH2_KNOWNHOST_CHECK_MISMATCH:
+ case SSH_SERVER_KNOWN_CHANGED:
ret = -EINVAL;
session_error_setg(errp, s,
- "host key does not match the one in known_hosts"
- " (found key %s)", found->key);
+ "host key does not match the one in known_hosts");
goto out;
- case LIBSSH2_KNOWNHOST_CHECK_NOTFOUND:
+ case SSH_SERVER_FOUND_OTHER:
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "host key for this server not found, another type "
+ "exists");
+ goto out;
+ case SSH_SERVER_FILE_NOT_FOUND:
+ ret = -EINVAL;
+ session_error_setg(errp, s, "known_hosts file not found");
+ goto out;
+ case SSH_SERVER_NOT_KNOWN:
ret = -EINVAL;
session_error_setg(errp, s, "no host key was found in known_hosts");
goto out;
- case LIBSSH2_KNOWNHOST_CHECK_FAILURE:
+ case SSH_SERVER_ERROR:
ret = -EINVAL;
- session_error_setg(errp, s,
- "failure matching the host key with known_hosts");
+ session_error_setg(errp, s, "server error");
goto out;
default:
ret = -EINVAL;
- session_error_setg(errp, s, "unknown error matching the host key"
- " with known_hosts (%d)", r);
+ session_error_setg(errp, s, "error while checking for known server");
goto out;
}
@@ -341,10 +291,6 @@ static int check_host_key_knownhosts(BDRVSSHState *s,
ret = 0;
out:
- if (knh != NULL) {
- libssh2_knownhost_free(knh);
- }
- g_free(knh_file);
return ret;
}
@@ -388,23 +334,37 @@ static int compare_fingerprint(const unsigned char *fingerprint, size_t len,
static int
check_host_key_hash(BDRVSSHState *s, const char *hash,
- int hash_type, size_t fingerprint_len, Error **errp)
+ enum ssh_publickey_hash_type type, size_t fingerprint_len,
+ Error **errp)
{
- const char *fingerprint;
+ int r;
+ ssh_key pubkey;
+ unsigned char *server_hash;
+ size_t server_hash_len;
- fingerprint = libssh2_hostkey_hash(s->session, hash_type);
- if (!fingerprint) {
+ r = ssh_get_publickey(s->session, &pubkey);
+ if (r < 0) {
session_error_setg(errp, s, "failed to read remote host key");
return -EINVAL;
}
- if(compare_fingerprint((unsigned char *) fingerprint, fingerprint_len,
- hash) != 0) {
+ r = ssh_get_publickey_hash(pubkey, type, &server_hash, &server_hash_len);
+ ssh_key_free(pubkey);
+ if (r < 0) {
+ session_error_setg(errp, s,
+ "failed reading the hash of the server SSH key");
+ return -EINVAL;
+ }
+
+ if (compare_fingerprint(server_hash, server_hash_len, hash) != 0) {
+ ssh_clean_pubkey_hash(&server_hash);
error_setg(errp, "remote host key does not match host_key_check '%s'",
hash);
return -EPERM;
}
+ ssh_clean_pubkey_hash(&server_hash);
+
return 0;
}
@@ -419,13 +379,13 @@ static int check_host_key(BDRVSSHState *s, const char *host, int port,
/* host_key_check=md5:xx:yy:zz:... */
if (strncmp(host_key_check, "md5:", 4) == 0) {
return check_host_key_hash(s, &host_key_check[4],
- LIBSSH2_HOSTKEY_HASH_MD5, 16, errp);
+ SSH_PUBLICKEY_HASH_MD5, 16, errp);
}
/* host_key_check=sha1:xx:yy:zz:... */
if (strncmp(host_key_check, "sha1:", 5) == 0) {
return check_host_key_hash(s, &host_key_check[5],
- LIBSSH2_HOSTKEY_HASH_SHA1, 20, errp);
+ SSH_PUBLICKEY_HASH_SHA1, 20, errp);
}
/* host_key_check=yes */
@@ -440,57 +400,32 @@ static int check_host_key(BDRVSSHState *s, const char *host, int port,
static int authenticate(BDRVSSHState *s, const char *user, Error **errp)
{
int r, ret;
- const char *userauthlist;
- LIBSSH2_AGENT *agent = NULL;
- struct libssh2_agent_publickey *identity;
- struct libssh2_agent_publickey *prev_identity = NULL;
+ int method;
- userauthlist = libssh2_userauth_list(s->session, user, strlen(user));
- if (strstr(userauthlist, "publickey") == NULL) {
+ r = ssh_userauth_none(s->session, NULL);
+ if (r == SSH_AUTH_ERROR) {
ret = -EPERM;
- error_setg(errp,
- "remote server does not support \"publickey\" authentication");
+ session_error_setg(errp, s, "failed to call ssh_userauth_none");
goto out;
}
- /* Connect to ssh-agent and try each identity in turn. */
- agent = libssh2_agent_init(s->session);
- if (!agent) {
- ret = -EINVAL;
- session_error_setg(errp, s, "failed to initialize ssh-agent support");
- goto out;
- }
- if (libssh2_agent_connect(agent)) {
- ret = -ECONNREFUSED;
- session_error_setg(errp, s, "failed to connect to ssh-agent");
- goto out;
- }
- if (libssh2_agent_list_identities(agent)) {
- ret = -EINVAL;
- session_error_setg(errp, s,
- "failed requesting identities from ssh-agent");
- goto out;
- }
+ method = ssh_userauth_list(s->session, NULL);
- for(;;) {
- r = libssh2_agent_get_identity(agent, &identity, prev_identity);
- if (r == 1) { /* end of list */
- break;
- }
- if (r < 0) {
+ /* Try to authenticate with publickey, using the ssh-agent
+ * if available.
+ */
+ if (method & SSH_AUTH_METHOD_PUBLICKEY) {
+ r = ssh_userauth_publickey_auto(s->session, NULL, NULL);
+ if (r == SSH_AUTH_ERROR) {
ret = -EINVAL;
- session_error_setg(errp, s,
- "failed to obtain identity from ssh-agent");
+ error_setg(errp, "failed to authenticate using publickey "
+ "authentication");
goto out;
- }
- r = libssh2_agent_userauth(agent, user, identity);
- if (r == 0) {
+ } else if (r == SSH_AUTH_SUCCESS) {
/* Authenticated! */
ret = 0;
goto out;
}
- /* Failed to authenticate with this identity, try the next one. */
- prev_identity = identity;
}
ret = -EPERM;
@@ -498,13 +433,6 @@ static int authenticate(BDRVSSHState *s, const char *user, Error **errp)
"and the identities held by your ssh-agent");
out:
- if (agent != NULL) {
- /* Note: libssh2 implementation implicitly calls
- * libssh2_agent_disconnect if necessary.
- */
- libssh2_agent_free(agent);
- }
-
return ret;
}
@@ -547,7 +475,7 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
QemuOpts *opts = NULL;
Error *local_err = NULL;
const char *host, *user, *path, *host_key_check;
- int port;
+ unsigned int port;
opts = qemu_opts_create(&ssh_runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
@@ -588,31 +516,55 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
host_key_check = "yes";
}
- /* Construct the host:port name for inet_connect. */
- g_free(s->hostport);
- s->hostport = g_strdup_printf("%s:%d", host, port);
-
- /* Open the socket and connect. */
- s->sock = inet_connect(s->hostport, errp);
- if (s->sock < 0) {
- ret = -EIO;
- goto err;
- }
-
/* Create SSH session. */
- s->session = libssh2_session_init();
+ s->session = ssh_new();
if (!s->session) {
ret = -EINVAL;
- session_error_setg(errp, s, "failed to initialize libssh2 session");
goto err;
}
-#if TRACE_LIBSSH2 != 0
- libssh2_trace(s->session, TRACE_LIBSSH2);
-#endif
+ /* Make sure we are in blocking mode during the connection and
+ * authentication phases.
+ */
+ ssh_set_blocking(s->session, 1);
- r = libssh2_session_handshake(s->session, s->sock);
- if (r != 0) {
+ r = ssh_options_set(s->session, SSH_OPTIONS_USER, user);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the user in the libssh session");
+ goto err;
+ }
+
+ r = ssh_options_set(s->session, SSH_OPTIONS_HOST, host);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the host in the libssh session");
+ goto err;
+ }
+
+ if (port > 0) {
+ r = ssh_options_set(s->session, SSH_OPTIONS_PORT, &port);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the port in the libssh session");
+ goto err;
+ }
+ }
+
+ /* Read ~/.ssh/config. */
+ r = ssh_options_parse_config(s->session, NULL);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s, "failed to parse ~/.ssh/config");
+ goto err;
+ }
+
+ /* Connect. */
+ r = ssh_connect(s->session);
+ if (r < 0) {
ret = -EINVAL;
session_error_setg(errp, s, "failed to establish SSH session");
goto err;
@@ -631,8 +583,15 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
}
/* Start SFTP. */
- s->sftp = libssh2_sftp_init(s->session);
+ s->sftp = sftp_new(s->session);
if (!s->sftp) {
+ session_error_setg(errp, s, "failed to create sftp handle");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ r = sftp_init(s->sftp);
+ if (r < 0) {
session_error_setg(errp, s, "failed to initialize sftp handle");
ret = -EINVAL;
goto err;
@@ -641,17 +600,20 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
/* Open the remote file. */
DPRINTF("opening file %s flags=0x%x creat_mode=0%o",
path, ssh_flags, creat_mode);
- s->sftp_handle = libssh2_sftp_open(s->sftp, path, ssh_flags, creat_mode);
+ s->sftp_handle = sftp_open(s->sftp, path, ssh_flags, creat_mode);
if (!s->sftp_handle) {
session_error_setg(errp, s, "failed to open remote file '%s'", path);
ret = -EINVAL;
goto err;
}
+ /* Make sure the SFTP file is handled in blocking mode. */
+ sftp_file_set_blocking(s->sftp_handle);
+
qemu_opts_del(opts);
- r = libssh2_sftp_fstat(s->sftp_handle, &s->attrs);
- if (r < 0) {
+ s->attrs = sftp_fstat(s->sftp_handle);
+ if (!s->attrs) {
sftp_error_setg(errp, s, "failed to read file attributes");
return -EINVAL;
}
@@ -659,19 +621,21 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
return 0;
err:
+ if (s->attrs) {
+ sftp_attributes_free(s->attrs);
+ }
+ s->attrs = NULL;
if (s->sftp_handle) {
- libssh2_sftp_close(s->sftp_handle);
+ sftp_close(s->sftp_handle);
}
s->sftp_handle = NULL;
if (s->sftp) {
- libssh2_sftp_shutdown(s->sftp);
+ sftp_free(s->sftp);
}
s->sftp = NULL;
if (s->session) {
- libssh2_session_disconnect(s->session,
- "from qemu ssh client: "
- "error opening connection");
- libssh2_session_free(s->session);
+ ssh_disconnect(s->session);
+ ssh_free(s->session);
}
s->session = NULL;
@@ -689,9 +653,11 @@ static int ssh_file_open(BlockDriverState *bs, QDict *options, int bdrv_flags,
ssh_state_init(s);
- ssh_flags = LIBSSH2_FXF_READ;
+ ssh_flags = 0;
if (bdrv_flags & BDRV_O_RDWR) {
- ssh_flags |= LIBSSH2_FXF_WRITE;
+ ssh_flags |= O_RDWR;
+ } else {
+ ssh_flags |= O_RDONLY;
}
/* Start up SSH. */
@@ -701,15 +667,11 @@ static int ssh_file_open(BlockDriverState *bs, QDict *options, int bdrv_flags,
}
/* Go non-blocking. */
- libssh2_session_set_blocking(s->session, 0);
+ ssh_set_blocking(s->session, 0);
return 0;
err:
- if (s->sock >= 0) {
- close(s->sock);
- }
- s->sock = -1;
return ret;
}
@@ -751,8 +713,7 @@ static int ssh_create(const char *filename, QemuOpts *opts, Error **errp)
}
r = connect_to_ssh(&s, uri_options,
- LIBSSH2_FXF_READ|LIBSSH2_FXF_WRITE|
- LIBSSH2_FXF_CREAT|LIBSSH2_FXF_TRUNC,
+ O_RDWR | O_CREAT | O_TRUNC,
0644, errp);
if (r < 0) {
ret = r;
@@ -760,14 +721,14 @@ static int ssh_create(const char *filename, QemuOpts *opts, Error **errp)
}
if (total_size > 0) {
- libssh2_sftp_seek64(s.sftp_handle, total_size-1);
- r2 = libssh2_sftp_write(s.sftp_handle, c, 1);
+ sftp_seek64(s.sftp_handle, total_size - 1);
+ r2 = sftp_write(s.sftp_handle, c, 1);
if (r2 < 0) {
sftp_error_setg(errp, &s, "truncate failed");
ret = -EINVAL;
goto out;
}
- s.attrs.filesize = total_size;
+ s.attrs->size = total_size;
}
ret = 0;
@@ -793,90 +754,20 @@ static int ssh_has_zero_init(BlockDriverState *bs)
/* Assume false, unless we can positively prove it's true. */
int has_zero_init = 0;
- if (s->attrs.flags & LIBSSH2_SFTP_ATTR_PERMISSIONS) {
- if (s->attrs.permissions & LIBSSH2_SFTP_S_IFREG) {
- has_zero_init = 1;
- }
+ if (s->attrs->type == SSH_FILEXFER_TYPE_REGULAR) {
+ has_zero_init = 1;
}
return has_zero_init;
}
-static void restart_coroutine(void *opaque)
-{
- Coroutine *co = opaque;
-
- DPRINTF("co=%p", co);
-
- qemu_coroutine_enter(co);
-}
-
-static coroutine_fn void set_fd_handler(BDRVSSHState *s, BlockDriverState *bs)
-{
- int r;
- IOHandler *rd_handler = NULL, *wr_handler = NULL;
- Coroutine *co = qemu_coroutine_self();
-
- r = libssh2_session_block_directions(s->session);
-
- if (r & LIBSSH2_SESSION_BLOCK_INBOUND) {
- rd_handler = restart_coroutine;
- }
- if (r & LIBSSH2_SESSION_BLOCK_OUTBOUND) {
- wr_handler = restart_coroutine;
- }
-
- DPRINTF("s->sock=%d rd_handler=%p wr_handler=%p", s->sock,
- rd_handler, wr_handler);
-
- aio_set_fd_handler(bdrv_get_aio_context(bs), s->sock,
- false, rd_handler, wr_handler, co);
-}
-
-static coroutine_fn void clear_fd_handler(BDRVSSHState *s,
- BlockDriverState *bs)
-{
- DPRINTF("s->sock=%d", s->sock);
- aio_set_fd_handler(bdrv_get_aio_context(bs), s->sock,
- false, NULL, NULL, NULL);
-}
-
/* A non-blocking call returned EAGAIN, so yield, ensuring the
* handlers are set up so that we'll be rescheduled when there is an
* interesting event on the socket.
*/
static coroutine_fn void co_yield(BDRVSSHState *s, BlockDriverState *bs)
{
- set_fd_handler(s, bs);
qemu_coroutine_yield();
- clear_fd_handler(s, bs);
-}
-
-/* SFTP has a function `libssh2_sftp_seek64' which seeks to a position
- * in the remote file. Notice that it just updates a field in the
- * sftp_handle structure, so there is no network traffic and it cannot
- * fail.
- *
- * However, `libssh2_sftp_seek64' does have a catastrophic effect on
- * performance since it causes the handle to throw away all in-flight
- * reads and buffered readahead data. Therefore this function tries
- * to be intelligent about when to call the underlying libssh2 function.
- */
-#define SSH_SEEK_WRITE 0
-#define SSH_SEEK_READ 1
-#define SSH_SEEK_FORCE 2
-
-static void ssh_seek(BDRVSSHState *s, int64_t offset, int flags)
-{
- bool op_read = (flags & SSH_SEEK_READ) != 0;
- bool force = (flags & SSH_SEEK_FORCE) != 0;
-
- if (force || op_read != s->offset_op_read || offset != s->offset) {
- DPRINTF("seeking to offset=%" PRIi64, offset);
- libssh2_sftp_seek64(s->sftp_handle, offset);
- s->offset = offset;
- s->offset_op_read = op_read;
- }
}
static coroutine_fn int ssh_read(BDRVSSHState *s, BlockDriverState *bs,
@@ -890,7 +781,7 @@ static coroutine_fn int ssh_read(BDRVSSHState *s, BlockDriverState *bs,
DPRINTF("offset=%" PRIi64 " size=%zu", offset, size);
- ssh_seek(s, offset, SSH_SEEK_READ);
+ sftp_seek64(s->sftp_handle, offset);
/* This keeps track of the current iovec element ('i'), where we
* will write to next ('buf'), and the end of the current iovec
@@ -900,35 +791,34 @@ static coroutine_fn int ssh_read(BDRVSSHState *s, BlockDriverState *bs,
buf = i->iov_base;
end_of_vec = i->iov_base + i->iov_len;
- /* libssh2 has a hard-coded limit of 2000 bytes per request,
- * although it will also do readahead behind our backs. Therefore
- * we may have to do repeated reads here until we have read 'size'
- * bytes.
- */
for (got = 0; got < size; ) {
again:
- DPRINTF("sftp_read buf=%p size=%zu", buf, end_of_vec - buf);
- r = libssh2_sftp_read(s->sftp_handle, buf, end_of_vec - buf);
+ DPRINTF("sftp_read buf=%p size=%zu (actual size=%zu)",
+ buf, end_of_vec - buf, MIN(end_of_vec - buf, 16384));
+ /* The size of SFTP packets is limited to 32K bytes, so limit
+ * the amount of data requested to 16K, as libssh currently
+ * does not handle multiple requests on its own:
+ * https://red.libssh.org/issues/58
+ */
+ r = sftp_read(s->sftp_handle, buf, MIN(end_of_vec - buf, 16384));
DPRINTF("sftp_read returned %zd", r);
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
- if (r < 0) {
- sftp_error_report(s, "read failed");
- s->offset = -1;
- return -EIO;
- }
- if (r == 0) {
+ if (r == SSH_EOF) {
/* EOF: Short read so pad the buffer with zeroes and return it. */
qemu_iovec_memset(qiov, got, 0, size - got);
return 0;
}
+ if (r < 0) {
+ sftp_error_report(s, "read failed");
+ return -EIO;
+ }
got += r;
buf += r;
- s->offset += r;
if (buf >= end_of_vec && got < size) {
i++;
buf = i->iov_base;
@@ -965,7 +855,7 @@ static int ssh_write(BDRVSSHState *s, BlockDriverState *bs,
DPRINTF("offset=%" PRIi64 " size=%zu", offset, size);
- ssh_seek(s, offset, SSH_SEEK_WRITE);
+ sftp_seek64(s->sftp_handle, offset);
/* This keeps track of the current iovec element ('i'), where we
* will read from next ('buf'), and the end of the current iovec
@@ -977,45 +867,35 @@ static int ssh_write(BDRVSSHState *s, BlockDriverState *bs,
for (written = 0; written < size; ) {
again:
- DPRINTF("sftp_write buf=%p size=%zu", buf, end_of_vec - buf);
- r = libssh2_sftp_write(s->sftp_handle, buf, end_of_vec - buf);
+ DPRINTF("sftp_write buf=%p size=%zu (actual size=%zu)",
+ buf, end_of_vec - buf, MIN(end_of_vec - buf, 131072));
+ /* Avoid too large data packets, as libssh currently does not
+ * handle multiple requests on its own:
+ * https://red.libssh.org/issues/58
+ */
+ r = sftp_write(s->sftp_handle, buf, MIN(end_of_vec - buf, 131072));
DPRINTF("sftp_write returned %zd", r);
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
if (r < 0) {
sftp_error_report(s, "write failed");
- s->offset = -1;
return -EIO;
}
- /* The libssh2 API is very unclear about this. A comment in
- * the code says "nothing was acked, and no EAGAIN was
- * received!" which apparently means that no data got sent
- * out, and the underlying channel didn't return any EAGAIN
- * indication. I think this is a bug in either libssh2 or
- * OpenSSH (server-side). In any case, forcing a seek (to
- * discard libssh2 internal buffers), and then trying again
- * works for me.
- */
- if (r == 0) {
- ssh_seek(s, offset + written, SSH_SEEK_WRITE|SSH_SEEK_FORCE);
- co_yield(s, bs);
- goto again;
- }
written += r;
buf += r;
- s->offset += r;
if (buf >= end_of_vec && written < size) {
i++;
buf = i->iov_base;
end_of_vec = i->iov_base + i->iov_len;
}
- if (offset + written > s->attrs.filesize)
- s->attrs.filesize = offset + written;
+ if (offset + written > s->attrs->size) {
+ s->attrs->size = offset + written;
+ }
}
return 0;
@@ -1039,33 +919,40 @@ static coroutine_fn int ssh_co_writev(BlockDriverState *bs,
static void unsafe_flush_warning(BDRVSSHState *s, const char *what)
{
if (!s->unsafe_flush_warning) {
- error_report("warning: ssh server %s does not support fsync",
- s->hostport);
+ char *host;
+ unsigned int port;
+
+ ssh_options_get(s->session, SSH_OPTIONS_HOST, &host);
+ ssh_options_get_port(s->session, &port);
+
+ error_report("warning: ssh server %s:%u does not support fsync",
+ host, port);
if (what) {
error_report("to support fsync, you need %s", what);
}
+ ssh_string_free_char(host);
s->unsafe_flush_warning = true;
}
}
-#ifdef HAS_LIBSSH2_SFTP_FSYNC
+#ifdef HAS_LIBSSH_SFTP_FSYNC
static coroutine_fn int ssh_flush(BDRVSSHState *s, BlockDriverState *bs)
{
int r;
DPRINTF("fsync");
+
+ if (!sftp_extension_supported(s->sftp, "fsync@openssh.com", "1")) {
+ unsafe_flush_warning(s, "OpenSSH >= 6.3");
+ return 0;
+ }
again:
- r = libssh2_sftp_fsync(s->sftp_handle);
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ r = sftp_fsync(s->sftp_handle);
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
- if (r == LIBSSH2_ERROR_SFTP_PROTOCOL &&
- libssh2_sftp_last_error(s->sftp) == LIBSSH2_FX_OP_UNSUPPORTED) {
- unsafe_flush_warning(s, "OpenSSH >= 6.3");
- return 0;
- }
if (r < 0) {
sftp_error_report(s, "fsync failed");
return -EIO;
@@ -1086,25 +973,25 @@ static coroutine_fn int ssh_co_flush(BlockDriverState *bs)
return ret;
}
-#else /* !HAS_LIBSSH2_SFTP_FSYNC */
+#else /* !HAS_LIBSSH_SFTP_FSYNC */
static coroutine_fn int ssh_co_flush(BlockDriverState *bs)
{
BDRVSSHState *s = bs->opaque;
- unsafe_flush_warning(s, "libssh2 >= 1.4.4");
+ unsafe_flush_warning(s, "libssh >= 0.8.0");
return 0;
}
-#endif /* !HAS_LIBSSH2_SFTP_FSYNC */
+#endif /* !HAS_LIBSSH_SFTP_FSYNC */
static int64_t ssh_getlength(BlockDriverState *bs)
{
BDRVSSHState *s = bs->opaque;
int64_t length;
- /* Note we cannot make a libssh2 call here. */
- length = (int64_t) s->attrs.filesize;
+ /* Note we cannot make a libssh call here. */
+ length = (int64_t) s->attrs->size;
DPRINTF("length=%" PRIi64, length);
return length;
@@ -1130,12 +1017,16 @@ static void bdrv_ssh_init(void)
{
int r;
- r = libssh2_init(0);
+ r = ssh_init();
if (r != 0) {
- fprintf(stderr, "libssh2 initialization failed, %d\n", r);
+ fprintf(stderr, "libssh initialization failed, %d\n", r);
exit(EXIT_FAILURE);
}
+#if TRACE_LIBSSH != 0
+ ssh_set_log_level(TRACE_LIBSSH);
+#endif
+
bdrv_register(&bdrv_ssh);
}
@@ -316,7 +316,7 @@ gcrypt_kdf="no"
vte=""
virglrenderer=""
tpm="yes"
-libssh2=""
+libssh=""
numa=""
tcmalloc="no"
jemalloc="no"
@@ -1142,9 +1142,9 @@ for opt do
;;
--enable-tpm) tpm="yes"
;;
- --disable-libssh2) libssh2="no"
+ --disable-libssh) libssh="no"
;;
- --enable-libssh2) libssh2="yes"
+ --enable-libssh) libssh="yes"
;;
--disable-numa) numa="no"
;;
@@ -1386,7 +1386,7 @@ disabled with --disable-FEATURE, default is enabled if available:
glusterfs GlusterFS backend
archipelago Archipelago backend
tpm TPM support
- libssh2 ssh block device support
+ libssh ssh block device support
numa libnuma support
tcmalloc tcmalloc support
jemalloc jemalloc support
@@ -3206,43 +3206,42 @@ EOF
fi
##########################################
-# libssh2 probe
-min_libssh2_version=1.2.8
-if test "$libssh2" != "no" ; then
- if $pkg_config --atleast-version=$min_libssh2_version libssh2; then
- libssh2_cflags=$($pkg_config libssh2 --cflags)
- libssh2_libs=$($pkg_config libssh2 --libs)
- libssh2=yes
+# libssh probe
+if test "$libssh" != "no" ; then
+ if $pkg_config --exists libssh; then
+ libssh_cflags=$($pkg_config libssh --cflags)
+ libssh_libs=$($pkg_config libssh --libs)
+ libssh=yes
else
- if test "$libssh2" = "yes" ; then
- error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2"
+ if test "$libssh" = "yes" ; then
+ error_exit "libssh required for --enable-libssh"
fi
- libssh2=no
+ libssh=no
fi
fi
##########################################
-# libssh2_sftp_fsync probe
+# libssh sftp_fsync probe
-if test "$libssh2" = "yes"; then
+if test "$libssh" = "yes"; then
cat > $TMPC <<EOF
#include <stdio.h>
-#include <libssh2.h>
-#include <libssh2_sftp.h>
+#include <libssh/libssh.h>
+#include <libssh/sftp.h>
int main(void) {
- LIBSSH2_SESSION *session;
- LIBSSH2_SFTP *sftp;
- LIBSSH2_SFTP_HANDLE *sftp_handle;
- session = libssh2_session_init ();
- sftp = libssh2_sftp_init (session);
- sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
- libssh2_sftp_fsync (sftp_handle);
+ ssh_session session;
+ sftp_session sftp;
+ sftp_file sftp_handle;
+ session = ssh_new();
+ sftp = sftp_new(session);
+ sftp_handle = sftp_open(sftp, "/", 0, 0);
+ sftp_fsync(sftp_handle);
return 0;
}
EOF
- # libssh2_cflags/libssh2_libs defined in previous test.
- if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
- QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
+ # libssh_cflags/libssh_libs defined in previous test.
+ if compile_prog "$libssh_cflags" "$libssh_libs" ; then
+ QEMU_CFLAGS="-DHAS_LIBSSH_SFTP_FSYNC $QEMU_CFLAGS"
fi
fi
@@ -4949,7 +4948,7 @@ echo "Archipelago support $archipelago"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
-echo "libssh2 support $libssh2"
+echo "libssh support $libssh"
echo "TPM passthrough $tpm_passthrough"
echo "QOM debugging $qom_cast_debug"
echo "lzo support $lzo"
@@ -5474,10 +5473,10 @@ if test "$archipelago" = "yes" ; then
echo "ARCHIPELAGO_LIBS=$archipelago_libs" >> $config_host_mak
fi
-if test "$libssh2" = "yes" ; then
- echo "CONFIG_LIBSSH2=m" >> $config_host_mak
- echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
- echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
+if test "$libssh" = "yes" ; then
+ echo "CONFIG_LIBSSH=m" >> $config_host_mak
+ echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
+ echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
fi
# USB host support
Rewrite the implementation of the ssh block driver to use libssh instead of libssh2. The libssh library has various advantages over libssh2: - easier API for authentication (for example for using ssh-agent) - easier API for known_hosts handling - supports newer types of keys in known_hosts Kerberos authentication can be enabled once the libssh bug for it [1] is fixed. The development version of libssh (i.e. the future 0.8.x) supports fsync, so reuse the build time check for this. [1] https://red.libssh.org/issues/242 Signed-off-by: Pino Toscano <ptoscano@redhat.com> --- Changes from v1: - fixed jumbo packets writing - fixed missing 'err' assignment - fixed commit message block/Makefile.objs | 6 +- block/ssh.c | 551 +++++++++++++++++++++------------------------------- configure | 65 +++---- 3 files changed, 256 insertions(+), 366 deletions(-)