| Message ID | 20161017143803.142231-1-mika.westerberg@linux.intel.com (mailing list archive) |
|---|---|
| State | Under Review |
| Headers | show |
On Monday, October 17, 2016 05:38:03 PM Mika Westerberg wrote: > In order to use this driver in ACPI based systems, convert the driver to > take advantage of device properties APIs instead of Device Tree specific > one and make it available outside of CONFIG_OF. > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> ACK > --- > drivers/input/keyboard/gpio_keys.c | 92 ++++++++++++++++---------------------- > 1 file changed, 38 insertions(+), 54 deletions(-) > > diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c > index 29093657f2ef..0e6d516df01b 100644 > --- a/drivers/input/keyboard/gpio_keys.c > +++ b/drivers/input/keyboard/gpio_keys.c > @@ -22,13 +22,12 @@ > #include <linux/proc_fs.h> > #include <linux/delay.h> > #include <linux/platform_device.h> > +#include <linux/property.h> > #include <linux/input.h> > #include <linux/gpio_keys.h> > #include <linux/workqueue.h> > #include <linux/gpio.h> > #include <linux/of.h> > -#include <linux/of_platform.h> > -#include <linux/of_gpio.h> > #include <linux/of_irq.h> > #include <linux/spinlock.h> > > @@ -479,13 +478,15 @@ static int gpio_keys_setup_key(struct platform_device *pdev, > spin_lock_init(&bdata->lock); > > if (gpio_is_valid(button->gpio)) { > - > - error = devm_gpio_request_one(&pdev->dev, button->gpio, > - GPIOF_IN, desc); > - if (error < 0) { > - dev_err(dev, "Failed to request GPIO %d, error %d\n", > - button->gpio, error); > - return error; > + /* Only request GPIO if GPIO descriptor is not used */ > + if (!button->gpiod) { > + error = devm_gpio_request_one(&pdev->dev, button->gpio, > + GPIOF_IN, desc); > + if (error < 0) { > + dev_err(dev, "Failed to request GPIO %d, error %d\n", > + button->gpio, error); > + return error; > + } > } > > if (button->debounce_interval) { > @@ -608,29 +609,17 @@ static void gpio_keys_close(struct input_dev *input) > pdata->disable(input->dev.parent); > } > > -/* > - * Handlers for alternative sources of platform_data > - */ > - > -#ifdef CONFIG_OF > -/* > - * Translate OpenFirmware node properties into platform_data > - */ > static struct gpio_keys_platform_data * > gpio_keys_get_devtree_pdata(struct device *dev) > { > - struct device_node *node, *pp; > struct gpio_keys_platform_data *pdata; > struct gpio_keys_button *button; > + struct fwnode_handle *child; > int error; > int nbuttons; > int i; > > - node = dev->of_node; > - if (!node) > - return ERR_PTR(-ENODEV); > - > - nbuttons = of_get_available_child_count(node); > + nbuttons = device_get_child_node_count(dev); > if (nbuttons == 0) > return ERR_PTR(-ENODEV); > > @@ -643,55 +632,60 @@ gpio_keys_get_devtree_pdata(struct device *dev) > pdata->buttons = (struct gpio_keys_button *)(pdata + 1); > pdata->nbuttons = nbuttons; > > - pdata->rep = !!of_get_property(node, "autorepeat", NULL); > + if (device_property_present(dev, "autorepeat")) > + pdata->rep = true; > > - of_property_read_string(node, "label", &pdata->name); > + device_property_read_string(dev, "label", &pdata->name); > > i = 0; > - for_each_available_child_of_node(node, pp) { > - enum of_gpio_flags flags; > - > + device_for_each_child_node(dev, child) { > button = &pdata->buttons[i++]; > > - button->gpio = of_get_gpio_flags(pp, 0, &flags); > - if (button->gpio < 0) { > - error = button->gpio; > + button->gpiod = devm_get_gpiod_from_child(dev, NULL, child); > + if (IS_ERR(button->gpiod)) { > + error = PTR_ERR(button->gpiod); > if (error != -ENOENT) { > if (error != -EPROBE_DEFER) > dev_err(dev, > - "Failed to get gpio flags, error: %d\n", > + "Failed to get gpio, error: %d\n", > error); > return ERR_PTR(error); > } > } else { > - button->active_low = flags & OF_GPIO_ACTIVE_LOW; > + button->active_low = gpiod_is_active_low(button->gpiod); > } > > - button->irq = irq_of_parse_and_map(pp, 0); > + /* This is only supported by Device Tree */ > + button->irq = irq_of_parse_and_map(to_of_node(child), 0); > > - if (!gpio_is_valid(button->gpio) && !button->irq) { > + if (IS_ERR(button->gpiod) && !button->irq) { > dev_err(dev, "Found button without gpios or irqs\n"); > return ERR_PTR(-EINVAL); > } > > - if (of_property_read_u32(pp, "linux,code", &button->code)) { > + button->gpio = desc_to_gpio(button->gpiod); > + > + if (fwnode_property_read_u32(child, "linux,code", > + &button->code)) { > dev_err(dev, "Button without keycode: 0x%x\n", > button->gpio); > return ERR_PTR(-EINVAL); > } > > - button->desc = of_get_property(pp, "label", NULL); > + fwnode_property_read_string(child, "label", &button->desc); > > - if (of_property_read_u32(pp, "linux,input-type", &button->type)) > + if (fwnode_property_read_u32(child, "linux,input-type", > + &button->type)) > button->type = EV_KEY; > > - button->wakeup = of_property_read_bool(pp, "wakeup-source") || > - /* legacy name */ > - of_property_read_bool(pp, "gpio-key,wakeup"); > + if (fwnode_property_present(child, "wakeup-source") || > + fwnode_property_present(child, "gpio-key,wakeup")) > + button->wakeup = true; > > - button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL); > + if (fwnode_property_present(child, "linux,can-disable")) > + button->can_disable = true; > > - if (of_property_read_u32(pp, "debounce-interval", > + if (fwnode_property_read_u32(child, "debounce-interval", > &button->debounce_interval)) > button->debounce_interval = 5; > } > @@ -708,16 +702,6 @@ static const struct of_device_id gpio_keys_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, gpio_keys_of_match); > > -#else > - > -static inline struct gpio_keys_platform_data * > -gpio_keys_get_devtree_pdata(struct device *dev) > -{ > - return ERR_PTR(-ENODEV); > -} > - > -#endif > - > static int gpio_keys_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -873,7 +857,7 @@ static struct platform_driver gpio_keys_device_driver = { > .driver = { > .name = "gpio-keys", > .pm = &gpio_keys_pm_ops, > - .of_match_table = of_match_ptr(gpio_keys_of_match), > + .of_match_table = gpio_keys_of_match, > } > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2016-10-17 at 17:38 +0300, Mika Westerberg wrote: > In order to use this driver in ACPI based systems, convert the driver > to > take advantage of device properties APIs instead of Device Tree > specific > one and make it available outside of CONFIG_OF. > I used to have some patch against this driver, but it appears that my work was semi-finished and quite outdated, this one looks really nice! Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > --- > drivers/input/keyboard/gpio_keys.c | 92 ++++++++++++++++------------- > --------- > 1 file changed, 38 insertions(+), 54 deletions(-) > > diff --git a/drivers/input/keyboard/gpio_keys.c > b/drivers/input/keyboard/gpio_keys.c > index 29093657f2ef..0e6d516df01b 100644 > --- a/drivers/input/keyboard/gpio_keys.c > +++ b/drivers/input/keyboard/gpio_keys.c > @@ -22,13 +22,12 @@ > #include <linux/proc_fs.h> > #include <linux/delay.h> > #include <linux/platform_device.h> > +#include <linux/property.h> > #include <linux/input.h> > #include <linux/gpio_keys.h> > #include <linux/workqueue.h> > #include <linux/gpio.h> > #include <linux/of.h> > -#include <linux/of_platform.h> > -#include <linux/of_gpio.h> > #include <linux/of_irq.h> > #include <linux/spinlock.h> > > @@ -479,13 +478,15 @@ static int gpio_keys_setup_key(struct > platform_device *pdev, > spin_lock_init(&bdata->lock); > > if (gpio_is_valid(button->gpio)) { > - > - error = devm_gpio_request_one(&pdev->dev, button- > >gpio, > - GPIOF_IN, desc); > - if (error < 0) { > - dev_err(dev, "Failed to request GPIO %d, > error %d\n", > - button->gpio, error); > - return error; > + /* Only request GPIO if GPIO descriptor is not used > */ > + if (!button->gpiod) { > + error = devm_gpio_request_one(&pdev->dev, > button->gpio, > + GPIOF_IN, > desc); > + if (error < 0) { > + dev_err(dev, "Failed to request GPIO > %d, error %d\n", > + button->gpio, error); > + return error; > + } > } > > if (button->debounce_interval) { > @@ -608,29 +609,17 @@ static void gpio_keys_close(struct input_dev > *input) > pdata->disable(input->dev.parent); > } > > -/* > - * Handlers for alternative sources of platform_data > - */ > - > -#ifdef CONFIG_OF > -/* > - * Translate OpenFirmware node properties into platform_data > - */ > static struct gpio_keys_platform_data * > gpio_keys_get_devtree_pdata(struct device *dev) > { > - struct device_node *node, *pp; > struct gpio_keys_platform_data *pdata; > struct gpio_keys_button *button; > + struct fwnode_handle *child; > int error; > int nbuttons; > int i; > > - node = dev->of_node; > - if (!node) > - return ERR_PTR(-ENODEV); > - > - nbuttons = of_get_available_child_count(node); > + nbuttons = device_get_child_node_count(dev); > if (nbuttons == 0) > return ERR_PTR(-ENODEV); > > @@ -643,55 +632,60 @@ gpio_keys_get_devtree_pdata(struct device *dev) > pdata->buttons = (struct gpio_keys_button *)(pdata + 1); > pdata->nbuttons = nbuttons; > > - pdata->rep = !!of_get_property(node, "autorepeat", NULL); > + if (device_property_present(dev, "autorepeat")) > + pdata->rep = true; > > - of_property_read_string(node, "label", &pdata->name); > + device_property_read_string(dev, "label", &pdata->name); > > i = 0; > - for_each_available_child_of_node(node, pp) { > - enum of_gpio_flags flags; > - > + device_for_each_child_node(dev, child) { > button = &pdata->buttons[i++]; > > - button->gpio = of_get_gpio_flags(pp, 0, &flags); > - if (button->gpio < 0) { > - error = button->gpio; > + button->gpiod = devm_get_gpiod_from_child(dev, NULL, > child); > + if (IS_ERR(button->gpiod)) { > + error = PTR_ERR(button->gpiod); > if (error != -ENOENT) { > if (error != -EPROBE_DEFER) > dev_err(dev, > - "Failed to get gpio > flags, error: %d\n", > + "Failed to get gpio, > error: %d\n", > error); > return ERR_PTR(error); > } > } else { > - button->active_low = flags & > OF_GPIO_ACTIVE_LOW; > + button->active_low = > gpiod_is_active_low(button->gpiod); > } > > - button->irq = irq_of_parse_and_map(pp, 0); > + /* This is only supported by Device Tree */ > + button->irq = irq_of_parse_and_map(to_of_node(child), > 0); > > - if (!gpio_is_valid(button->gpio) && !button->irq) { > + if (IS_ERR(button->gpiod) && !button->irq) { > dev_err(dev, "Found button without gpios or > irqs\n"); > return ERR_PTR(-EINVAL); > } > > - if (of_property_read_u32(pp, "linux,code", &button- > >code)) { > + button->gpio = desc_to_gpio(button->gpiod); > + > + if (fwnode_property_read_u32(child, "linux,code", > + &button->code)) { > dev_err(dev, "Button without keycode: > 0x%x\n", > button->gpio); > return ERR_PTR(-EINVAL); > } > > - button->desc = of_get_property(pp, "label", NULL); > + fwnode_property_read_string(child, "label", &button- > >desc); > > - if (of_property_read_u32(pp, "linux,input-type", > &button->type)) > + if (fwnode_property_read_u32(child, "linux,input- > type", > + &button->type)) > button->type = EV_KEY; > > - button->wakeup = of_property_read_bool(pp, "wakeup- > source") || > - /* legacy name */ > - of_property_read_bool(pp, "gpio- > key,wakeup"); > + if (fwnode_property_present(child, "wakeup-source") > || > + fwnode_property_present(child, "gpio- > key,wakeup")) > + button->wakeup = true; > > - button->can_disable = !!of_get_property(pp, > "linux,can-disable", NULL); > + if (fwnode_property_present(child, "linux,can- > disable")) > + button->can_disable = true; > > - if (of_property_read_u32(pp, "debounce-interval", > + if (fwnode_property_read_u32(child, "debounce- > interval", > &button->debounce_interval)) > button->debounce_interval = 5; > } > @@ -708,16 +702,6 @@ static const struct of_device_id > gpio_keys_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, gpio_keys_of_match); > > -#else > - > -static inline struct gpio_keys_platform_data * > -gpio_keys_get_devtree_pdata(struct device *dev) > -{ > - return ERR_PTR(-ENODEV); > -} > - > -#endif > - > static int gpio_keys_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -873,7 +857,7 @@ static struct platform_driver > gpio_keys_device_driver = { > .driver = { > .name = "gpio-keys", > .pm = &gpio_keys_pm_ops, > - .of_match_table = of_match_ptr(gpio_keys_of_match), > + .of_match_table = gpio_keys_of_match, > } > }; >
Hi Mika, On Mon, Oct 17, 2016 at 05:38:03PM +0300, Mika Westerberg wrote: > In order to use this driver in ACPI based systems, convert the driver to > take advantage of device properties APIs instead of Device Tree specific > one and make it available outside of CONFIG_OF. > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > --- > drivers/input/keyboard/gpio_keys.c | 92 ++++++++++++++++---------------------- > 1 file changed, 38 insertions(+), 54 deletions(-) > > diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c > index 29093657f2ef..0e6d516df01b 100644 > --- a/drivers/input/keyboard/gpio_keys.c > +++ b/drivers/input/keyboard/gpio_keys.c > @@ -22,13 +22,12 @@ > #include <linux/proc_fs.h> > #include <linux/delay.h> > #include <linux/platform_device.h> > +#include <linux/property.h> > #include <linux/input.h> > #include <linux/gpio_keys.h> > #include <linux/workqueue.h> > #include <linux/gpio.h> > #include <linux/of.h> > -#include <linux/of_platform.h> > -#include <linux/of_gpio.h> > #include <linux/of_irq.h> > #include <linux/spinlock.h> > > @@ -479,13 +478,15 @@ static int gpio_keys_setup_key(struct platform_device *pdev, > spin_lock_init(&bdata->lock); > > if (gpio_is_valid(button->gpio)) { > - > - error = devm_gpio_request_one(&pdev->dev, button->gpio, > - GPIOF_IN, desc); > - if (error < 0) { > - dev_err(dev, "Failed to request GPIO %d, error %d\n", > - button->gpio, error); > - return error; > + /* Only request GPIO if GPIO descriptor is not used */ > + if (!button->gpiod) { So the issue here is that button is supposed to be constant (in case of legacy platform data) and we should not be stuffing gpiod in there. The commit adding the descriptor to button data was wrong. I have a patch that moves in from button data to bdata for polled keys and also an alternative patch for gpio_keys; I'll post the series. Thanks.
On Wed, Oct 26, 2016 at 06:16:10PM -0700, Dmitry Torokhov wrote: > Hi Mika, > > On Mon, Oct 17, 2016 at 05:38:03PM +0300, Mika Westerberg wrote: > > In order to use this driver in ACPI based systems, convert the driver to > > take advantage of device properties APIs instead of Device Tree specific > > one and make it available outside of CONFIG_OF. > > > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > --- > > drivers/input/keyboard/gpio_keys.c | 92 ++++++++++++++++---------------------- > > 1 file changed, 38 insertions(+), 54 deletions(-) > > > > diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c > > index 29093657f2ef..0e6d516df01b 100644 > > --- a/drivers/input/keyboard/gpio_keys.c > > +++ b/drivers/input/keyboard/gpio_keys.c > > @@ -22,13 +22,12 @@ > > #include <linux/proc_fs.h> > > #include <linux/delay.h> > > #include <linux/platform_device.h> > > +#include <linux/property.h> > > #include <linux/input.h> > > #include <linux/gpio_keys.h> > > #include <linux/workqueue.h> > > #include <linux/gpio.h> > > #include <linux/of.h> > > -#include <linux/of_platform.h> > > -#include <linux/of_gpio.h> > > #include <linux/of_irq.h> > > #include <linux/spinlock.h> > > > > @@ -479,13 +478,15 @@ static int gpio_keys_setup_key(struct platform_device *pdev, > > spin_lock_init(&bdata->lock); > > > > if (gpio_is_valid(button->gpio)) { > > - > > - error = devm_gpio_request_one(&pdev->dev, button->gpio, > > - GPIOF_IN, desc); > > - if (error < 0) { > > - dev_err(dev, "Failed to request GPIO %d, error %d\n", > > - button->gpio, error); > > - return error; > > + /* Only request GPIO if GPIO descriptor is not used */ > > + if (!button->gpiod) { > > So the issue here is that button is supposed to be constant (in case of > legacy platform data) and we should not be stuffing gpiod in there. The > commit adding the descriptor to button data was wrong. > > I have a patch that moves in from button data to bdata for polled keys > and also an alternative patch for gpio_keys; I'll post the series. OK, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 29093657f2ef..0e6d516df01b 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -22,13 +22,12 @@ #include <linux/proc_fs.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/spinlock.h> @@ -479,13 +478,15 @@ static int gpio_keys_setup_key(struct platform_device *pdev, spin_lock_init(&bdata->lock); if (gpio_is_valid(button->gpio)) { - - error = devm_gpio_request_one(&pdev->dev, button->gpio, - GPIOF_IN, desc); - if (error < 0) { - dev_err(dev, "Failed to request GPIO %d, error %d\n", - button->gpio, error); - return error; + /* Only request GPIO if GPIO descriptor is not used */ + if (!button->gpiod) { + error = devm_gpio_request_one(&pdev->dev, button->gpio, + GPIOF_IN, desc); + if (error < 0) { + dev_err(dev, "Failed to request GPIO %d, error %d\n", + button->gpio, error); + return error; + } } if (button->debounce_interval) { @@ -608,29 +609,17 @@ static void gpio_keys_close(struct input_dev *input) pdata->disable(input->dev.parent); } -/* - * Handlers for alternative sources of platform_data - */ - -#ifdef CONFIG_OF -/* - * Translate OpenFirmware node properties into platform_data - */ static struct gpio_keys_platform_data * gpio_keys_get_devtree_pdata(struct device *dev) { - struct device_node *node, *pp; struct gpio_keys_platform_data *pdata; struct gpio_keys_button *button; + struct fwnode_handle *child; int error; int nbuttons; int i; - node = dev->of_node; - if (!node) - return ERR_PTR(-ENODEV); - - nbuttons = of_get_available_child_count(node); + nbuttons = device_get_child_node_count(dev); if (nbuttons == 0) return ERR_PTR(-ENODEV); @@ -643,55 +632,60 @@ gpio_keys_get_devtree_pdata(struct device *dev) pdata->buttons = (struct gpio_keys_button *)(pdata + 1); pdata->nbuttons = nbuttons; - pdata->rep = !!of_get_property(node, "autorepeat", NULL); + if (device_property_present(dev, "autorepeat")) + pdata->rep = true; - of_property_read_string(node, "label", &pdata->name); + device_property_read_string(dev, "label", &pdata->name); i = 0; - for_each_available_child_of_node(node, pp) { - enum of_gpio_flags flags; - + device_for_each_child_node(dev, child) { button = &pdata->buttons[i++]; - button->gpio = of_get_gpio_flags(pp, 0, &flags); - if (button->gpio < 0) { - error = button->gpio; + button->gpiod = devm_get_gpiod_from_child(dev, NULL, child); + if (IS_ERR(button->gpiod)) { + error = PTR_ERR(button->gpiod); if (error != -ENOENT) { if (error != -EPROBE_DEFER) dev_err(dev, - "Failed to get gpio flags, error: %d\n", + "Failed to get gpio, error: %d\n", error); return ERR_PTR(error); } } else { - button->active_low = flags & OF_GPIO_ACTIVE_LOW; + button->active_low = gpiod_is_active_low(button->gpiod); } - button->irq = irq_of_parse_and_map(pp, 0); + /* This is only supported by Device Tree */ + button->irq = irq_of_parse_and_map(to_of_node(child), 0); - if (!gpio_is_valid(button->gpio) && !button->irq) { + if (IS_ERR(button->gpiod) && !button->irq) { dev_err(dev, "Found button without gpios or irqs\n"); return ERR_PTR(-EINVAL); } - if (of_property_read_u32(pp, "linux,code", &button->code)) { + button->gpio = desc_to_gpio(button->gpiod); + + if (fwnode_property_read_u32(child, "linux,code", + &button->code)) { dev_err(dev, "Button without keycode: 0x%x\n", button->gpio); return ERR_PTR(-EINVAL); } - button->desc = of_get_property(pp, "label", NULL); + fwnode_property_read_string(child, "label", &button->desc); - if (of_property_read_u32(pp, "linux,input-type", &button->type)) + if (fwnode_property_read_u32(child, "linux,input-type", + &button->type)) button->type = EV_KEY; - button->wakeup = of_property_read_bool(pp, "wakeup-source") || - /* legacy name */ - of_property_read_bool(pp, "gpio-key,wakeup"); + if (fwnode_property_present(child, "wakeup-source") || + fwnode_property_present(child, "gpio-key,wakeup")) + button->wakeup = true; - button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL); + if (fwnode_property_present(child, "linux,can-disable")) + button->can_disable = true; - if (of_property_read_u32(pp, "debounce-interval", + if (fwnode_property_read_u32(child, "debounce-interval", &button->debounce_interval)) button->debounce_interval = 5; } @@ -708,16 +702,6 @@ static const struct of_device_id gpio_keys_of_match[] = { }; MODULE_DEVICE_TABLE(of, gpio_keys_of_match); -#else - -static inline struct gpio_keys_platform_data * -gpio_keys_get_devtree_pdata(struct device *dev) -{ - return ERR_PTR(-ENODEV); -} - -#endif - static int gpio_keys_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -873,7 +857,7 @@ static struct platform_driver gpio_keys_device_driver = { .driver = { .name = "gpio-keys", .pm = &gpio_keys_pm_ops, - .of_match_table = of_match_ptr(gpio_keys_of_match), + .of_match_table = gpio_keys_of_match, } };
In order to use this driver in ACPI based systems, convert the driver to take advantage of device properties APIs instead of Device Tree specific one and make it available outside of CONFIG_OF. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/input/keyboard/gpio_keys.c | 92 ++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 54 deletions(-)