@@ -202,7 +202,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
- select SND_SOC_WM9713 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
@@ -1061,6 +1061,7 @@ config SND_SOC_WM9712
config SND_SOC_WM9713
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW
# Amp
config SND_SOC_LM4857
@@ -17,12 +17,15 @@
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
@@ -38,6 +41,7 @@ struct wm9713_priv {
u32 pll_in; /* PLL input frequency */
unsigned int hp_mixer[2];
struct mutex lock;
+ struct wm97xx_platform_data *mfd_pdata;
};
#define HPL_MIXER 0
@@ -1207,15 +1211,21 @@ static int wm9713_soc_probe(struct snd_soc_codec *codec)
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
struct regmap *regmap;
- wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
- WM9713_VENDOR_ID_MASK);
- if (IS_ERR(wm9713->ac97))
- return PTR_ERR(wm9713->ac97);
-
- regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
- if (IS_ERR(regmap)) {
- snd_soc_free_ac97_codec(wm9713->ac97);
- return PTR_ERR(regmap);
+ if (wm9713->mfd_pdata) {
+ wm9713->ac97 = wm9713->mfd_pdata->ac97;
+ regmap = wm9713->mfd_pdata->regmap;
+ } else {
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
+ WM9713_VENDOR_ID_MASK);
+ if (IS_ERR(wm9713->ac97))
+ return PTR_ERR(wm9713->ac97);
+ regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
+ if (IS_ERR(regmap)) {
+ snd_soc_free_ac97_codec(wm9713->ac97);
+ return PTR_ERR(regmap);
+ }
+#endif
}
snd_soc_codec_init_regmap(codec, regmap);
@@ -1230,8 +1240,12 @@ static int wm9713_soc_remove(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9713->ac97);
+ if (!wm9713->mfd_pdata) {
+ snd_soc_codec_exit_regmap(codec);
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ snd_soc_free_ac97_codec(wm9713->ac97);
+#endif
+ }
return 0;
}
@@ -1262,6 +1276,7 @@ static int wm9713_probe(struct platform_device *pdev)
mutex_init(&wm9713->lock);
+ wm9713->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9713);
return snd_soc_register_codec(&pdev->dev,
Add support for the new ac97 bus model, where devices are automatically discovered on AC-Links. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- sound/soc/codecs/Kconfig | 3 ++- sound/soc/codecs/wm9713.c | 37 ++++++++++++++++++++++++++----------- 2 files changed, 28 insertions(+), 12 deletions(-)