| Message ID | 1477590438-18095-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
On Thu, Oct 27, 2016 at 02:47:17PM -0300, Javier Martinez Canillas wrote: > Using the PWM_POLARITY_INVERTED macro instead of the hardcoded number > 0 makes the DTS easier to read. Eeee.... PWM_POLARITY_INVERTED = 1 << 0 = 1. And you are replacing 0 with 1. Hm? This is not described at all in commit message... Best regards, Krzysztof > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > arch/arm/boot/dts/exynos4412-odroidu3.dts | 3 ++- > arch/arm/boot/dts/exynos4412-trats2.dts | 3 ++- > 2 files changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts > index 99634c54dca9..480a80624b77 100644 > --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts > +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts > @@ -12,6 +12,7 @@ > */ > > /dts-v1/; > +#include <dt-bindings/pwm/pwm.h> > #include "exynos4412-odroid-common.dtsi" > > / { > @@ -35,7 +36,7 @@ > > fan0: pwm-fan { > compatible = "pwm-fan"; > - pwms = <&pwm 0 10000 0>; > + pwms = <&pwm 0 10000 PWM_POLARITY_INVERTED>; > cooling-min-state = <0>; > cooling-max-state = <3>; > #cooling-cells = <2>; > diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts > index 41ecd6d465a7..63ad30507d4f 100644 > --- a/arch/arm/boot/dts/exynos4412-trats2.dts > +++ b/arch/arm/boot/dts/exynos4412-trats2.dts > @@ -18,6 +18,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/clock/maxim,max77686.h> > +#include <dt-bindings/pwm/pwm.h> > > / { > model = "Samsung Trats 2 based on Exynos4412"; > @@ -164,7 +165,7 @@ > max77693_haptic { > compatible = "maxim,max77693-haptic"; > haptic-supply = <&ldo26_reg>; > - pwms = <&pwm 0 38022 0>; > + pwms = <&pwm 0 38022 PWM_POLARITY_INVERTED>; > }; > > charger { > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Krzysztof, On 10/28/2016 10:41 AM, Krzysztof Kozlowski wrote: > On Thu, Oct 27, 2016 at 02:47:17PM -0300, Javier Martinez Canillas wrote: >> Using the PWM_POLARITY_INVERTED macro instead of the hardcoded number >> 0 makes the DTS easier to read. > > > Eeee.... PWM_POLARITY_INVERTED = 1 << 0 = 1. > > And you are replacing 0 with 1. Hm? This is not described at all in > commit message... > > Best regards, > Krzysztof > Damn! I don't know how I misread the DTS macro as 0, and didn't find issues when testing the patches on an Exynos5800 Peach Pi. I should had run scripts/dtc/dtx_diff to notice that the DTB changed, I'm so sorry about that... Please discard the patches. Best regards,
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 99634c54dca9..480a80624b77 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -12,6 +12,7 @@ */ /dts-v1/; +#include <dt-bindings/pwm/pwm.h> #include "exynos4412-odroid-common.dtsi" / { @@ -35,7 +36,7 @@ fan0: pwm-fan { compatible = "pwm-fan"; - pwms = <&pwm 0 10000 0>; + pwms = <&pwm 0 10000 PWM_POLARITY_INVERTED>; cooling-min-state = <0>; cooling-max-state = <3>; #cooling-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 41ecd6d465a7..63ad30507d4f 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,6 +18,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -164,7 +165,7 @@ max77693_haptic { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; - pwms = <&pwm 0 38022 0>; + pwms = <&pwm 0 38022 PWM_POLARITY_INVERTED>; }; charger {
Using the PWM_POLARITY_INVERTED macro instead of the hardcoded number 0 makes the DTS easier to read. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 3 ++- arch/arm/boot/dts/exynos4412-trats2.dts | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)