Message ID | 1477925138-23457-6-git-send-email-bgolaszewski@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote: > The tilcdc driver is not yet ready for working together with the > dumb-vga-dac drm bridge. While the work on enabling drm_bridge > support in tilcdc continues, enable the VGA connector on da850-lcdk > with the following workaround: use the tilcdc-panel driver with > a set of common (and tested) resolutions. > > Once the drm bridge support is complete, we'll remove the node added > by this patch and use the correct solution. This change will be > transparent for the user. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> I dont think this can be applied. If this goes in v4.10, then the DT blob becomes an ABI and driver will have to support tilcdc-panel driver for DA850 forever. Its probably better to wait for the proper driver support to arrive. Thanks, Sekhar
On 01/11/16 12:26, Sekhar Nori wrote: > On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote: >> The tilcdc driver is not yet ready for working together with the >> dumb-vga-dac drm bridge. While the work on enabling drm_bridge >> support in tilcdc continues, enable the VGA connector on da850-lcdk >> with the following workaround: use the tilcdc-panel driver with >> a set of common (and tested) resolutions. >> >> Once the drm bridge support is complete, we'll remove the node added >> by this patch and use the correct solution. This change will be >> transparent for the user. >> >> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > I dont think this can be applied. If this goes in v4.10, then the DT > blob becomes an ABI and driver will have to support tilcdc-panel driver > for DA850 forever. > > Its probably better to wait for the proper driver support to arrive. Agreed, NAK for this. Tomi
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index b39796e..df582c6 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -62,6 +62,65 @@ regulator-max-microvolt = <5000000>; }; + /* + * Remove this node once the tilcdc driver gets support for + * drm bridge modules. + */ + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + status = "okay"; + + panel-info { + ac-bias = <0>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <255>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <0>; + fifo-th = <5>; + }; + + display-timings { + native-mode = <&svga_timings>; + vga_timings: 640x480@60 { + clock-frequency = <27500000>; + hactive = <640>; + hback-porch = <90>; + hfront-porch = <40>; + hsync-len = <128>; + vactive = <480>; + vback-porch = <23>; + vfront-porch = <1>; + vsync-len = <4>; + }; + vga_timings_hf: 640x480@75 { + clock-frequency = <34000000>; + hactive = <640>; + hback-porch = <90>; + hfront-porch = <40>; + hsync-len = <128>; + vactive = <480>; + vback-porch = <23>; + vfront-porch = <1>; + vsync-len = <4>; + }; + svga_timings: 800x600@56 { + clock-frequency = <37500000>; + hactive = <800>; + hback-porch = <140>; + hfront-porch = <40>; + hsync-len = <128>; + vactive = <600>; + vback-porch = <23>; + vfront-porch = <1>; + vsync-len = <4>; + }; + }; + }; }; &pmx_core { @@ -251,3 +310,7 @@ &ddrctl { status = "okay"; }; + +&display { + status = "okay"; +};
The tilcdc driver is not yet ready for working together with the dumb-vga-dac drm bridge. While the work on enabling drm_bridge support in tilcdc continues, enable the VGA connector on da850-lcdk with the following workaround: use the tilcdc-panel driver with a set of common (and tested) resolutions. Once the drm bridge support is complete, we'll remove the node added by this patch and use the correct solution. This change will be transparent for the user. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850-lcdk.dts | 63 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+)