| Message ID | 1478513376-14307-4-git-send-email-pankaj.dubey@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
Hello Pankaj, On 11/07/2016 07:09 AM, Pankaj Dubey wrote: > The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an > accurate low frequency clock for MAX8997 internal circuit as well as > external circuit. This patch adds support for these two clocks. > > CC: Michael Turquette <mturquette@baylibre.com> > CC: Rob Herring <robh+dt@kernel.org> > CC: devicetree@vger.kernel.org > CC: linux-clk@vger.kernel.org > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > --- What kernel version are you basing this on? The Maxim common clock code is going away for v4.9 and instead the clk-max77686 driver supports both 77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine Maxim max77686 and max77802 driver"). Since the 8997 clock IP looks very similar to 77802 AFAICT, you should also extend the clk-max77686 driver to have 8997 support. Best regards,
Hi Javier, On 7 November 2016 at 20:31, Javier Martinez Canillas <javier@osg.samsung.com> wrote: > Hello Pankaj, > > On 11/07/2016 07:09 AM, Pankaj Dubey wrote: >> The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an >> accurate low frequency clock for MAX8997 internal circuit as well as >> external circuit. This patch adds support for these two clocks. >> >> CC: Michael Turquette <mturquette@baylibre.com> >> CC: Rob Herring <robh+dt@kernel.org> >> CC: devicetree@vger.kernel.org >> CC: linux-clk@vger.kernel.org >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> >> --- > > What kernel version are you basing this on? The Maxim common clock code This patch series, I have prepared on Krzysztof's for-next which is 4.9-rc1, > is going away for v4.9 and instead the clk-max77686 driver supports both > 77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine > Maxim max77686 and max77802 driver"). > > Since the 8997 clock IP looks very similar to 77802 AFAICT, you should > also extend the clk-max77686 driver to have 8997 support. > I was not aware of this change. I will check this and if I can reuse/extend max77686 for 8997 I will do it. Thanks, Pankaj Dubey > Best regards, > -- > Javier Martinez Canillas > Open Source Group > Samsung Research America > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Nov 07, 2016 at 03:39:33PM +0530, Pankaj Dubey wrote: > The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an > accurate low frequency clock for MAX8997 internal circuit as well as > external circuit. This patch adds support for these two clocks. > > CC: Michael Turquette <mturquette@baylibre.com> > CC: Rob Herring <robh+dt@kernel.org> > CC: devicetree@vger.kernel.org > CC: linux-clk@vger.kernel.org > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > --- > drivers/clk/Kconfig | 10 ++++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-max8997.c | 76 +++++++++++++++++++++++++++++++ > include/dt-bindings/clock/maxim,max8997.h | 23 ++++++++++ You need to split the dt-bindings header into separate one so others could pull it. Please also mention the dependencies between patches in cover letter, because it does not look like it could be applied as is. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index e2d9bd7..5339cbe 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -48,6 +48,16 @@ config COMMON_CLK_MAX77802 ---help--- This driver supports Maxim 77802 crystal oscillator clock. +config COMMON_CLK_MAX8997 + tristate "Clock driver for Maxim 8997 MFD" + depends on MFD_MAX8997 + select COMMON_CLK_MAX_GEN + ---help--- + This driver supports Maxim 8997 crystal oscillator clock. + The 32.768kHz crystal oscillator clock provides an accurate + low frequency clock for MAX8997 internal circuit as well as + external circuit. + config COMMON_CLK_RK808 tristate "Clock driver for RK808/RK818" depends on MFD_RK808 diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 3b6f9cf..1cfa9ab 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_LOONGSON32) += clk-ls1x.o obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o +obj-$(CONFIG_COMMON_CLK_MAX8997) += clk-max8997.o obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s7x.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o diff --git a/drivers/clk/clk-max8997.c b/drivers/clk/clk-max8997.c new file mode 100644 index 0000000..9158354 --- /dev/null +++ b/drivers/clk/clk-max8997.c @@ -0,0 +1,76 @@ +/* + * clk-max8997.c - Clock driver for Maxim 8997 + * + * Copyright (C) 2016 Samsung Electornics + * Pankaj Dubey <pankaj.dubey@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/clkdev.h> + +#include <dt-bindings/clock/maxim,max8997.h> +#include "clk-max-gen.h" + +static struct clk_init_data max8997_clks_init[MAX8997_CLKS_NUM] = { + [MAX8997_CLK_AP] = { + .name = "32khz_ap", + .ops = &max_gen_clk_ops, + }, + [MAX8997_CLK_CP] = { + .name = "32khz_cp", + .ops = &max_gen_clk_ops, + }, +}; + +static int max8997_clk_probe(struct platform_device *pdev) +{ + struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); + + return max_gen_clk_probe(pdev, iodev->regmap, MAX8997_REG_MAINCON1, + max8997_clks_init, MAX8997_CLKS_NUM); +} + +static int max8997_clk_remove(struct platform_device *pdev) +{ + return max_gen_clk_remove(pdev, MAX8997_CLKS_NUM); +} + +static const struct platform_device_id max8997_clk_id[] = { + { "max8997-clk", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max8997_clk_id); + +static struct platform_driver max8997_clk_driver = { + .driver = { + .name = "max8997-clk", + }, + .probe = max8997_clk_probe, + .remove = max8997_clk_remove, + .id_table = max8997_clk_id, +}; + +module_platform_driver(max8997_clk_driver); + +MODULE_DESCRIPTION("MAXIM 8997 Clock Driver"); +MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/dt-bindings/clock/maxim,max8997.h b/include/dt-bindings/clock/maxim,max8997.h new file mode 100644 index 0000000..f2dd972 --- /dev/null +++ b/include/dt-bindings/clock/maxim,max8997.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Author: Pankaj Dubey <pankaj.dubey@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 8997 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX8997_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX8997_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX8997_CLK_AP 0 +#define MAX8997_CLK_CP 1 + +/* Total number of clocks. */ +#define MAX8997_CLKS_NUM (MAX8997_CLK_CP + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX8997_CLOCK_H */
The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an accurate low frequency clock for MAX8997 internal circuit as well as external circuit. This patch adds support for these two clocks. CC: Michael Turquette <mturquette@baylibre.com> CC: Rob Herring <robh+dt@kernel.org> CC: devicetree@vger.kernel.org CC: linux-clk@vger.kernel.org Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> --- drivers/clk/Kconfig | 10 ++++ drivers/clk/Makefile | 1 + drivers/clk/clk-max8997.c | 76 +++++++++++++++++++++++++++++++ include/dt-bindings/clock/maxim,max8997.h | 23 ++++++++++ 4 files changed, 110 insertions(+) create mode 100644 drivers/clk/clk-max8997.c create mode 100644 include/dt-bindings/clock/maxim,max8997.h