diff mbox

[v1] ufs: introduce setup_xfer_req callback

Message ID 001d01d23994$0d233580$2769a080$@samsung.com (mailing list archive)
State Changes Requested, archived
Headers show

Commit Message

Kiwoong Kim Nov. 8, 2016, 7:45 a.m. UTC
Some UFS host controller may need to configure some things
before any transfer request is issued.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
---
 drivers/scsi/ufs/ufshcd.c |  2 ++
 drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
 2 files changed, 12 insertions(+)

Comments

subhashj@codeaurora.org Nov. 8, 2016, 7 p.m. UTC | #1
On 2016-11-07 23:45, Kiwoong Kim wrote:
> Some UFS host controller may need to configure some things
> before any transfer request is issued.
> 
> Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
> ---
>  drivers/scsi/ufs/ufshcd.c |  2 ++
>  drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 8cf5d8f..bf78321 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1516,6 +1516,7 @@ static int ufshcd_queuecommand(struct Scsi_Host
> *host, struct scsi_cmnd *cmd)
> 
>  	/* issue command to the controller */
>  	spin_lock_irqsave(hba->host->host_lock, flags);
> +	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
>  	ufshcd_send_command(hba, tag);
>  out_unlock:
>  	spin_unlock_irqrestore(hba->host->host_lock, flags);
> @@ -1727,6 +1728,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba 
> *hba,
>  	/* Make sure descriptors are ready before ringing the doorbell */
>  	wmb();
>  	spin_lock_irqsave(hba->host->host_lock, flags);
> +	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
>  	ufshcd_send_command(hba, tag);
>  	spin_unlock_irqrestore(hba->host->host_lock, flags);
> 
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index afff7f4..f2a69c0 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -261,6 +261,8 @@ struct ufs_pwr_mode_info {
>   * @pwr_change_notify: called before and after a power mode change
>   *			is carried out to allow vendor spesific capabilities
>   *			to be set.
> + * @setup_xfer_req: called before any transfer request is issued
> + *                  to set some things
>   * @suspend: called during host controller PM callback
>   * @resume: called during host controller PM callback
>   * @dbg_register_dump: used to dump controller debug information
> @@ -284,6 +286,7 @@ struct ufs_hba_variant_ops {
>  					enum ufs_notify_change_status status,
>  					struct ufs_pa_layer_attr *,
>  					struct ufs_pa_layer_attr *);
> +	void	(*setup_xfer_req)(struct ufs_hba *, int, bool);
>  	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
>  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>  	void	(*dbg_register_dump)(struct ufs_hba *hba);
> @@ -801,6 +804,13 @@ static inline int
> ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
>  	return -ENOTSUPP;
>  }
> 
> +static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba, int 
> tag,
> +					bool is_cmd_not_null)

This might be more readable: s/is_cmd_not_null/is_scsi_cmd , rest looks 
good in this patch.


> +{
> +	if (hba->vops && hba->vops->setup_xfer_req)
> +		return hba->vops->setup_xfer_req(hba, tag, is_cmd_not_null);
> +}
> +
>  static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum 
> ufs_pm_op op)
>  {
>  	if (hba->vops && hba->vops->suspend)
Kiwoong Kim Nov. 9, 2016, 5:51 a.m. UTC | #2
> > Some UFS host controller may need to configure some things before any
> > transfer request is issued.
> >
> > Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
> > ---
> >  drivers/scsi/ufs/ufshcd.c |  2 ++
> >  drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
> >  2 files changed, 12 insertions(+)
> >
> > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> > index 8cf5d8f..bf78321 100644
> > --- a/drivers/scsi/ufs/ufshcd.c
> > +++ b/drivers/scsi/ufs/ufshcd.c
> > @@ -1516,6 +1516,7 @@ static int ufshcd_queuecommand(struct Scsi_Host
> > *host, struct scsi_cmnd *cmd)
> >
> >  	/* issue command to the controller */
> >  	spin_lock_irqsave(hba->host->host_lock, flags);
> > +	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
> >  	ufshcd_send_command(hba, tag);
> >  out_unlock:
> >  	spin_unlock_irqrestore(hba->host->host_lock, flags); @@ -1727,6
> > +1728,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
> >  	/* Make sure descriptors are ready before ringing the doorbell */
> >  	wmb();
> >  	spin_lock_irqsave(hba->host->host_lock, flags);
> > +	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
> >  	ufshcd_send_command(hba, tag);
> >  	spin_unlock_irqrestore(hba->host->host_lock, flags);
> >
> > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> > index afff7f4..f2a69c0 100644
> > --- a/drivers/scsi/ufs/ufshcd.h
> > +++ b/drivers/scsi/ufs/ufshcd.h
> > @@ -261,6 +261,8 @@ struct ufs_pwr_mode_info {
> >   * @pwr_change_notify: called before and after a power mode change
> >   *			is carried out to allow vendor spesific capabilities
> >   *			to be set.
> > + * @setup_xfer_req: called before any transfer request is issued
> > + *                  to set some things
> >   * @suspend: called during host controller PM callback
> >   * @resume: called during host controller PM callback
> >   * @dbg_register_dump: used to dump controller debug information @@
> > -284,6 +286,7 @@ struct ufs_hba_variant_ops {
> >  					enum ufs_notify_change_status
status,
> >  					struct ufs_pa_layer_attr *,
> >  					struct ufs_pa_layer_attr *);
> > +	void	(*setup_xfer_req)(struct ufs_hba *, int, bool);
> >  	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
> >  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
> >  	void	(*dbg_register_dump)(struct ufs_hba *hba);
> > @@ -801,6 +804,13 @@ static inline int
> > ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
> >  	return -ENOTSUPP;
> >  }
> >
> > +static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba,
> > +int
> > tag,
> > +					bool is_cmd_not_null)
> 
> This might be more readable: s/is_cmd_not_null/is_scsi_cmd , rest looks
> good in this patch.

Okay. I'll apply what you said.

> 
> 
> > +{
> > +	if (hba->vops && hba->vops->setup_xfer_req)
> > +		return hba->vops->setup_xfer_req(hba, tag, is_cmd_not_null);
> > +}
> > +
> >  static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum
> > ufs_pm_op op)
> >  {
> >  	if (hba->vops && hba->vops->suspend)
> 
> --
> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 8cf5d8f..bf78321 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1516,6 +1516,7 @@  static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 
 	/* issue command to the controller */
 	spin_lock_irqsave(hba->host->host_lock, flags);
+	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
 	ufshcd_send_command(hba, tag);
 out_unlock:
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
@@ -1727,6 +1728,7 @@  static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	/* Make sure descriptors are ready before ringing the doorbell */
 	wmb();
 	spin_lock_irqsave(hba->host->host_lock, flags);
+	ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
 	ufshcd_send_command(hba, tag);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index afff7f4..f2a69c0 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -261,6 +261,8 @@  struct ufs_pwr_mode_info {
  * @pwr_change_notify: called before and after a power mode change
  *			is carried out to allow vendor spesific capabilities
  *			to be set.
+ * @setup_xfer_req: called before any transfer request is issued
+ *                  to set some things
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
@@ -284,6 +286,7 @@  struct ufs_hba_variant_ops {
 					enum ufs_notify_change_status status,
 					struct ufs_pa_layer_attr *,
 					struct ufs_pa_layer_attr *);
+	void	(*setup_xfer_req)(struct ufs_hba *, int, bool);
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
@@ -801,6 +804,13 @@  static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
 	return -ENOTSUPP;
 }
 
+static inline void ufshcd_vops_setup_xfer_req(struct ufs_hba *hba, int tag,
+					bool is_cmd_not_null)
+{
+	if (hba->vops && hba->vops->setup_xfer_req)
+		return hba->vops->setup_xfer_req(hba, tag, is_cmd_not_null);
+}
+
 static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
 {
 	if (hba->vops && hba->vops->suspend)