@@ -244,7 +244,7 @@
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
clock-frequency = <37500000>;
- clock-freq-min-max = <400000 37500000>;
+ max-frequency = <37500000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
@@ -255,7 +255,7 @@
sdio: dwmmc@10218000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10218000 0x4000>;
- clock-freq-min-max = <400000 37500000>;
+ max-frequency = <37500000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -271,7 +271,7 @@
bus-width = <8>;
cap-mmc-highspeed;
clock-frequency = <37500000>;
- clock-freq-min-max = <400000 37500000>;
+ max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -402,7 +402,7 @@
reg = <0x30020000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <37500000>;
- clock-freq-min-max = <400000 37500000>;
+ max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -227,7 +227,7 @@
sdmmc: dwmmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -239,7 +239,7 @@
sdio0: dwmmc@ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
<&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -251,7 +251,7 @@
sdio1: dwmmc@ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
<&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -263,7 +263,7 @@
emmc: dwmmc@ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
In drivers/mmc/core/host.c, there is "max-frequency" property. It should be same behavior. So use the "max-frequency" instead of "clock-freq-min-max". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- arch/arm/boot/dts/rk3036.dtsi | 6 +++--- arch/arm/boot/dts/rk322x.dtsi | 2 +- arch/arm/boot/dts/rk3288.dtsi | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-)