diff mbox

[v10,6/6] mfd: lpc_ich: Add support for Intel Apollo Lake GPIO pinctrl in non-ACPI system

Message ID 1478768430-13422-7-git-send-email-jui.nee.tan@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Andy Shevchenko
Headers show

Commit Message

Tan Jui Nee Nov. 10, 2016, 9 a.m. UTC
This driver uses the P2SB hide/unhide mechanism cooperatively
to pass the PCI BAR address to the gpio platform driver.

Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
Changes in V10:
	- No change

Changes in V9:
	- No change

Changes in V8:
	- Rename source file lpc_ich-apl.c to lpc_ich_apl.c (suggested by Mika).

Changes in V7:
	- Add author information and rewrite description of source file 
	  lpc_ich-apl.c and lpc_ich_apl.h.
	- Sort the header files by alphabetical order in lpc_ich-apl.c.
	- Rename header file lpc_ich-apl.h to lpc_ich_apl.h (suggested by Lee).
	- Remove unneeded pdata_size and platform_data from mfd_cell.
	  Also, remove unneeded apl_pinctrl_pdata.
	- Since variable apl_p2sb is only used once, hence switch it out for the
	  PCI_DEVFN macro (suggested by Lee).
	- Define APL_GPIO_COMMUNITY_MAX as total Apollo Lake GPIO communities
	  supported.
	- Set resources in mfd_cell for each GPIO community.
	- Call p2sb_bar() function once instead of four times inside the for loop.
	  And make p2sb_bar() function just to fill in the base address into a
	  scratch "struct resource" and have the loop do the additions to base/end.
	- Remove entire apl_pinctrl_pdata.name memory allocation since it is no
	  longer needed.
	- Return ret at the end of lpc_ich_add_gpio() function.

Changes in V6:
	- Rename CONFIG_X86_INTEL_APL to CONFIG_X86_INTEL_IVI so that it
	  relates to the actual product, as suggested by Mika.
	- Rework Makefile according Andy's comments.
	- Rename lpc_ich_misc() to lpc_ich_add_gpio() so that the name should not
	  be so generic, as suggested by Andy.
	- Call lpc_ich_add_gpio() via priv->chipset.
	- lpc_ich_add_gpio() function will be moved from 
	  .../include/linux/mfd/lpc_ich.h to
	  .../drivers/mfd/lpc_ich-apl.h
	  as this is a part of internal driver interface as suggested by Andy.
	- Move enum lpc_chipsets from 
	  .../drivers/mfd/lpc_ich-core.c to
	  .../include/linux/mfd/lpc_ich.h
	  as lpc_chipsets is also accessed by lpc_ich_add_gpio().
	- Check if kasprintf return value for all 4 gpio controllers before
	  proceed to add platform device by using mfd_add_devices().

Changes in V5:
	- Split lpc-ich driver into two parts (lpc_ich-core and lpc_ich-apl).
	  The file lpc_ich-apl.c introduces gpio platform driver in MFD.
	- Rename Kconfig option CONFIG_X86_INTEL_NON_ACPI to CONFIG_X86_INTEL_APL
	  so that it reflects actual product as suggested by Mika.

Changes in V4:
	- Move Kconfig option CONFIG_X86_INTEL_NON_ACPI from
	  [PATCH 2/3] x86/platform/p2sb: New Primary to Sideband bridge support driver for Intel SOC's
	  to
	  [PATCH 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake GPIO pinctrl in non-ACPI system
	  since the config is used in latter patch.
	- Select CONFIG_P2SB when CONFIG_LPC_ICH is enabled.
	- Remove #ifdef CONFIG_X86_INTEL_NON_ACPI and use
	  #if defined(CONFIG_X86_INTEL_NON_ACPI) when lpc_ich_misc is called
	  as suggested by Lee Jones.
	- Use single dimensional array instead of 2D array for apl_gpio_io_res
	  structure and use DEFINE_RES_IRQ for its IRQ resource.

Changes in V3:
	- Simplify register addresses calculation and use DEFINE_RES_MEM_NAMED
	  defines for apl_gpio_io_res structure
	- Define magic number for P2SB PCI ID
	- Replace switch-case with if-else since currently we have only one
	  use case
	- Only call mfd_add_devices() once for all gpio communities

Changes in V2:
	- Add new config option CONFIG_X86_INTEL_NON_ACPI and "select PINCTRL"
	  to fix kbuildbot error

 drivers/mfd/Kconfig        |   2 +
 drivers/mfd/Makefile       |   4 ++
 drivers/mfd/lpc_ich_apl.c  | 120 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/lpc_ich_apl.h  |  29 +++++++++++
 drivers/mfd/lpc_ich_core.c |   5 ++
 5 files changed, 160 insertions(+)
 create mode 100644 drivers/mfd/lpc_ich_apl.c
 create mode 100644 drivers/mfd/lpc_ich_apl.h

Comments

kernel test robot Nov. 10, 2016, 10:40 a.m. UTC | #1
Hi Tan,

[auto build test WARNING on v4.9-rc4]
[cannot apply to ljones-mfd/for-mfd-next platform-drivers-x86/for-next tip/x86/core next-20161110]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Tan-Jui-Nee/pinctrl-broxton-enable-platform-device-in-the-absent-of-ACPI-enumeration/20161110-170808
config: x86_64-randconfig-x012-201645 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All warnings (new ones prefixed by >>):

warning: (LPC_ICH) selects P2SB which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && PCI)

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Andy Shevchenko Nov. 10, 2016, 11:39 a.m. UTC | #2
On Thu, 2016-11-10 at 18:40 +0800, kbuild test robot wrote:
> Hi Tan,
> 
> [auto build test WARNING on v4.9-rc4]
> [cannot apply to ljones-mfd/for-mfd-next platform-drivers-x86/for-next 
> tip/x86/core next-20161110]
> [if your patch is applied to the wrong git tree, please drop us a note
> to help improve the system]
> 
> url:    https://github.com/0day-ci/linux/commits/Tan-Jui-Nee/pinctrl-b
> roxton-enable-platform-device-in-the-absent-of-ACPI-
> enumeration/20161110-170808
> config: x86_64-randconfig-x012-201645 (attached as .config)
> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> reproduce:
>         # save the attached .config to linux build tree
>         make ARCH=x86_64 
> 
> All warnings (new ones prefixed by >>):
> 
> warning: (LPC_ICH) selects P2SB which has unmet direct dependencies
> (X86 && X86_PLATFORM_DEVICES && PCI)

Since it will need to be fixed and new version is suggested, I dare to
comment couple of patches.
Andy Shevchenko Nov. 10, 2016, 4:19 p.m. UTC | #3
On Thu, 2016-11-10 at 17:00 +0800, Tan Jui Nee wrote:
> This driver uses the P2SB hide/unhide mechanism cooperatively
> to pass the PCI BAR address to the gpio platform driver.

@@ -161,6 +161,10 @@ obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+=
> intel_quark_i2c_gpio.o
>  obj-$(CONFIG_LPC_SCH)
> 		+= lpc_sch.o


>  lpc_ich-objs		:= lpc_ich_core.o
>  obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
> +lpc_ich-objs		:= lpc_ich_core.o

Once I pointed out on this.

> @@ -0,0 +1,120 @@
> +/*
> + * Intel Apollo Lake In-Vehicle Infotainment (IVI) systems used in
> cars support
> + *
> + * Copyright (C) 2016 Intel Corporation
> + *
> + * Author: Tan, Jui Nee <jui.nee.tan@intel.com>
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <asm/p2sb.h>
> +#include <linux/pci.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/lpc_ich.h>
> +#include <linux/pinctrl/pinctrl.h>

Perhaps some order like

#include <linux/mfd/core.h>
#include <linux/mfd/lpc_ich.h>
#include <linux/pci.h>
#include <linux/pinctrl/pinctrl.h>

#include <asm/p2sb.h>

> +
> +#include "lpc_ich_apl.h"


> +int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset)
> +{

> +	unsigned int i;
> +	int ret;
> +	struct resource base;

Reversed tree, please:

	struct resource base;
	unsigned int i;
	int ret;

> +
> +	if (chipset != LPC_APL)
> +		return -ENODEV;
> +	/*
> +	 * Apollo lake, has not 1, but 4 gpio controllers,
> +	 * handle it a bit differently.
> +	 */
> +
> +	ret = p2sb_bar(dev, PCI_DEVFN(PCI_IDSEL_P2SB, 0), &base);
> +	if (ret)
> +		goto warn_continue;
> +
> +	for (i = 0; i < APL_GPIO_COMMUNITY_MAX; i++) {
> +		struct resource *res = &apl_gpio_io_res[i];
> +
> +		/* Fill MEM resource */
> +		res->start += base.start;
> +		res->end += base.start;
> +		res->flags = base.flags;
> +
> +		res++;
> +	}
> +
> +	ret = mfd_add_devices(&dev->dev, 0,
> +		apl_gpio_devices, ARRAY_SIZE(apl_gpio_devices),
> +			NULL, 0, NULL);
> +
> 

> +	if (ret)
> +warn_continue:

Better if you put label before if for sake of readability. I pointed
once to this.

> +		dev_warn(&dev->dev,
> +			"Failed to add Apollo Lake GPIO: %d\n",
> +				ret);
> +
> +	return ret;
> +}
diff mbox

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c6df644..7bb2f7c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -391,7 +391,9 @@  config MFD_INTEL_QUARK_I2C_GPIO
 config LPC_ICH
 	tristate "Intel ICH LPC"
 	depends on PCI
+	depends on X86 && PCI
 	select MFD_CORE
+	select P2SB
 	help
 	  The LPC bridge function of the Intel ICH provides support for
 	  many functional units. This driver provides needed support for
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 06a91ea..ccafdfa 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,6 +161,10 @@  obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+= intel_quark_i2c_gpio.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
 lpc_ich-objs		:= lpc_ich_core.o
 obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
+lpc_ich-objs		:= lpc_ich_core.o
+ifeq ($(CONFIG_X86_INTEL_IVI),y)
+lpc_ich-objs += lpc_ich_apl.o
+endif
 obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
 obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
 obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
diff --git a/drivers/mfd/lpc_ich_apl.c b/drivers/mfd/lpc_ich_apl.c
new file mode 100644
index 0000000..7a79052
--- /dev/null
+++ b/drivers/mfd/lpc_ich_apl.c
@@ -0,0 +1,120 @@ 
+/*
+ * Intel Apollo Lake In-Vehicle Infotainment (IVI) systems used in cars support
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * Author: Tan, Jui Nee <jui.nee.tan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/p2sb.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/lpc_ich.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "lpc_ich_apl.h"
+
+/* Offset data for Apollo Lake GPIO communities */
+#define APL_GPIO_SOUTHWEST_OFFSET	0xc00000
+#define APL_GPIO_NORTHWEST_OFFSET	0xc40000
+#define APL_GPIO_NORTH_OFFSET		0xc50000
+#define APL_GPIO_WEST_OFFSET		0xc70000
+
+#define APL_GPIO_SOUTHWEST_NPIN		43
+#define APL_GPIO_NORTHWEST_NPIN		77
+#define APL_GPIO_NORTH_NPIN		78
+#define APL_GPIO_WEST_NPIN		47
+
+#define APL_GPIO_COMMUNITY_MAX		4
+
+#define APL_GPIO_IRQ 14
+
+#define PCI_IDSEL_P2SB	0x0d
+
+static struct resource apl_gpio_io_res[] = {
+	DEFINE_RES_MEM_NAMED(APL_GPIO_NORTH_OFFSET,
+		APL_GPIO_NORTH_NPIN * SZ_8, "apl_pinctrl_n"),
+	DEFINE_RES_MEM_NAMED(APL_GPIO_NORTHWEST_OFFSET,
+		APL_GPIO_NORTHWEST_NPIN * SZ_8, "apl_pinctrl_nw"),
+	DEFINE_RES_MEM_NAMED(APL_GPIO_WEST_OFFSET,
+		APL_GPIO_WEST_NPIN * SZ_8, "apl_pinctrl_w"),
+	DEFINE_RES_MEM_NAMED(APL_GPIO_SOUTHWEST_OFFSET,
+		APL_GPIO_SOUTHWEST_NPIN * SZ_8, "apl_pinctrl_sw"),
+	DEFINE_RES_IRQ(APL_GPIO_IRQ),
+};
+
+static struct mfd_cell apl_gpio_devices[] = {
+	{
+		.name = "apl-pinctrl",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(apl_gpio_io_res),
+		.resources = &apl_gpio_io_res[0],
+		.ignore_resource_conflicts = true,
+	},
+	{
+		.name = "apl-pinctrl",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(apl_gpio_io_res),
+		.resources = &apl_gpio_io_res[1],
+		.ignore_resource_conflicts = true,
+	},
+	{
+		.name = "apl-pinctrl",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(apl_gpio_io_res),
+		.resources = &apl_gpio_io_res[2],
+		.ignore_resource_conflicts = true,
+	},
+	{
+		.name = "apl-pinctrl",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(apl_gpio_io_res),
+		.resources = &apl_gpio_io_res[3],
+		.ignore_resource_conflicts = true,
+	},
+};
+
+int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset)
+{
+	unsigned int i;
+	int ret;
+	struct resource base;
+
+	if (chipset != LPC_APL)
+		return -ENODEV;
+	/*
+	 * Apollo lake, has not 1, but 4 gpio controllers,
+	 * handle it a bit differently.
+	 */
+
+	ret = p2sb_bar(dev, PCI_DEVFN(PCI_IDSEL_P2SB, 0), &base);
+	if (ret)
+		goto warn_continue;
+
+	for (i = 0; i < APL_GPIO_COMMUNITY_MAX; i++) {
+		struct resource *res = &apl_gpio_io_res[i];
+
+		/* Fill MEM resource */
+		res->start += base.start;
+		res->end += base.start;
+		res->flags = base.flags;
+
+		res++;
+	}
+
+	ret = mfd_add_devices(&dev->dev, 0,
+		apl_gpio_devices, ARRAY_SIZE(apl_gpio_devices),
+			NULL, 0, NULL);
+
+	if (ret)
+warn_continue:
+		dev_warn(&dev->dev,
+			"Failed to add Apollo Lake GPIO: %d\n",
+				ret);
+
+	return ret;
+}
diff --git a/drivers/mfd/lpc_ich_apl.h b/drivers/mfd/lpc_ich_apl.h
new file mode 100644
index 0000000..43fcc99
--- /dev/null
+++ b/drivers/mfd/lpc_ich_apl.h
@@ -0,0 +1,29 @@ 
+/*
+ * lpc_ich_apl.h - Intel In-Vehicle Infotainment (IVI) systems used in cars
+ *                 support
+ *
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * Author: Tan, Jui Nee <jui.nee.tan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LPC_ICH_APL_H__
+#define __LPC_ICH_APL_H__
+
+#include <linux/pci.h>
+
+#if IS_ENABLED(CONFIG_X86_INTEL_IVI)
+int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset);
+#else /* CONFIG_X86_INTEL_IVI is not set */
+static inline int lpc_ich_add_gpio(struct pci_dev *dev,
+	enum lpc_chipsets chipset)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/drivers/mfd/lpc_ich_core.c b/drivers/mfd/lpc_ich_core.c
index 3bb6334..25c4d99 100644
--- a/drivers/mfd/lpc_ich_core.c
+++ b/drivers/mfd/lpc_ich_core.c
@@ -68,6 +68,8 @@ 
 #include <linux/mfd/lpc_ich.h>
 #include <linux/platform_data/itco_wdt.h>
 
+#include "lpc_ich_apl.h"
+
 #define ACPIBASE		0x40
 #define ACPIBASE_GPE_OFF	0x28
 #define ACPIBASE_GPE_END	0x2f
@@ -1030,6 +1032,9 @@  static int lpc_ich_probe(struct pci_dev *dev,
 			cell_added = true;
 	}
 
+	if (!lpc_ich_add_gpio(dev, priv->chipset))
+		cell_added = true;
+
 	/*
 	 * We only care if at least one or none of the cells registered
 	 * successfully.