diff mbox

[2/5] media: i2c: max2175: Add MAX2175 support

Message ID 1478706284-59134-3-git-send-email-ramesh.shanmugasundaram@bp.renesas.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ramesh Shanmugasundaram Nov. 9, 2016, 3:44 p.m. UTC
This patch adds driver support for MAX2175 chip. This is Maxim
Integrated's RF to Bits tuner front end chip designed for software-defined
radio solutions. This driver exposes the tuner as a sub-device instance
with standard and custom controls to configure the device.

Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
---
 .../devicetree/bindings/media/i2c/max2175.txt      |   61 +
 drivers/media/i2c/Kconfig                          |    4 +
 drivers/media/i2c/Makefile                         |    2 +
 drivers/media/i2c/max2175/Kconfig                  |    8 +
 drivers/media/i2c/max2175/Makefile                 |    4 +
 drivers/media/i2c/max2175/max2175.c                | 1558 ++++++++++++++++++++
 drivers/media/i2c/max2175/max2175.h                |  108 ++
 7 files changed, 1745 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/max2175.txt
 create mode 100644 drivers/media/i2c/max2175/Kconfig
 create mode 100644 drivers/media/i2c/max2175/Makefile
 create mode 100644 drivers/media/i2c/max2175/max2175.c
 create mode 100644 drivers/media/i2c/max2175/max2175.h

Comments

Antti Palosaari Nov. 11, 2016, 7:16 a.m. UTC | #1
Hello

On 11/09/2016 05:44 PM, Ramesh Shanmugasundaram wrote:

> +static int max2175_set_lo_freq(struct max2175 *ctx, u64 lo_freq)
> +{
> +	u64 scaled_lo_freq, scaled_npf, scaled_integer, scaled_fraction;
> +	u32 frac_desired, int_desired, lo_mult = 1;
> +	const u32 scale_factor = 1000000U;
> +	u8 loband_bits = 0, vcodiv_bits = 0;
> +	enum max2175_band band;
> +	int ret;
> +
> +	/* Scale to larger number for precision */
> +	scaled_lo_freq = lo_freq * scale_factor * 100;
> +	band = max2175_read_bits(ctx, 5, 1, 0);
> +
> +	mxm_dbg(ctx, "set_lo_freq: scaled lo_freq %llu lo_freq %llu band %d\n",
> +		scaled_lo_freq, lo_freq, band);
> +
> +	switch (band) {
> +	case MAX2175_BAND_AM:
> +		if (max2175_read_bit(ctx, 5, 7) == 0)
> +			lo_mult = 16;

else is lo_mult = 1. No idea if it is correct, but sounds very small 
output divider for low freq like am band. And on the other-hand local 
oscillator output divider, which I expect this to be, is usually 2 or more.

> +		break;
> +	case MAX2175_BAND_FM:
> +		if (lo_freq <= 74700000) {
> +			lo_mult = 16;

No meaning as you set it later 8.

> +		} else if (lo_freq > 74700000 && lo_freq <= 110000000) {
> +			loband_bits = 1;
> +		} else {
> +			loband_bits = 1;
> +			vcodiv_bits = 3;
> +		}
> +		lo_mult = 8;
> +		break;
> +	case MAX2175_BAND_VHF:
> +		if (lo_freq <= 210000000) {
> +			loband_bits = 2;
> +			vcodiv_bits = 2;
> +		} else {
> +			loband_bits = 2;
> +			vcodiv_bits = 1;
> +		}
> +		lo_mult = 4;
> +		break;
> +	default:
> +		loband_bits = 3;
> +		vcodiv_bits = 2;
> +		lo_mult = 2;
> +		break;
> +	}
> +
> +	if (band == MAX2175_BAND_L)
> +		scaled_npf = div_u64(div_u64(scaled_lo_freq, ctx->xtal_freq),
> +				     lo_mult);
> +	else
> +		scaled_npf = div_u64(scaled_lo_freq, ctx->xtal_freq) * lo_mult;
> +
> +	scaled_npf = div_u64(scaled_npf, 100);
> +	scaled_integer = div_u64(scaled_npf, scale_factor) * scale_factor;
> +	int_desired = div_u64(scaled_npf, scale_factor);
> +	scaled_fraction = scaled_npf - scaled_integer;
> +	frac_desired = div_u64(scaled_fraction << 20, scale_factor);
> +
> +	/* Check CSM is not busy */
> +	ret = max2175_poll_csm_ready(ctx);
> +	if (ret)
> +		return ret;
> +
> +	mxm_dbg(ctx, "loband %u vcodiv %u lo_mult %u scaled_npf %llu\n",
> +		loband_bits, vcodiv_bits, lo_mult, scaled_npf);
> +	mxm_dbg(ctx, "scaled int %llu frac %llu desired int %u frac %u\n",
> +		scaled_integer, scaled_fraction, int_desired, frac_desired);
> +
> +	/* Write the calculated values to the appropriate registers */
> +	max2175_write(ctx, 1, int_desired);
> +	max2175_write_bits(ctx, 2, 3, 0, (frac_desired >> 16) & 0xf);
> +	max2175_write(ctx, 3, frac_desired >> 8);
> +	max2175_write(ctx, 4, frac_desired);
> +	max2175_write_bits(ctx, 5, 3, 2, loband_bits);
> +	max2175_write_bits(ctx, 6, 7, 6, vcodiv_bits);
> +	return ret;
> +}

That synthesizer config is hard to understand. It seems to be 
fractional-N, with configurable N, K and output divider - like a school 
book example.

               +----------------------------+
               v                            |
      Fref   +----+     +-------+         +------+
     ------> | PD | --> |  VCO  | ------> | /N.F |
             +----+     +-------+         +------+
                          |
                          |
                          v
                        +-------+  Fout
                        | /Rout | ------>
                        +-------+

I made following look-up table in order to understand it:

band      lo freq band vcodiv div_out
   AM  <  50000000    0      0      16 // reg 5 bit 7 ?
   FM  <  74700000    0      0      16
   FM  < 110000000    1      0       8
   FM  < 160000000    1      3       8
  VHF  < 210000000    2      2       4
  VHF  < 600000000    2      1       4
    L  <2000000000    3      2       2

"vcodiv" looks unrelated to synth calculation, dunno what it is.

One which makes calculation very complex looking is that it is based of 
floating point calculus. On integer mathematics you should replace 
fractional part with fractional modulus (usually letter "K" is used for 
fractional modulus on PLL calc).

So that ends up something like:
1) select suitable lo output divider from desired output frequency
2) calculate vco frequency
3) convert vco frequency to N and K
* N = Fvco/Fref
* K = Fvco%Fref
4) convert K to control word (looks like << 20)
5) program values

Result should be calculus without scaling.

regards
Antti
Laurent Pinchart Nov. 11, 2016, 11:50 a.m. UTC | #2
Hi Antti,

On Friday 11 Nov 2016 09:16:04 Antti Palosaari wrote:
> Hello
> 
> On 11/09/2016 05:44 PM, Ramesh Shanmugasundaram wrote:
> > +static int max2175_set_lo_freq(struct max2175 *ctx, u64 lo_freq)
> > +{
> > +	u64 scaled_lo_freq, scaled_npf, scaled_integer, scaled_fraction;
> > +	u32 frac_desired, int_desired, lo_mult = 1;
> > +	const u32 scale_factor = 1000000U;
> > +	u8 loband_bits = 0, vcodiv_bits = 0;
> > +	enum max2175_band band;
> > +	int ret;
> > +
> > +	/* Scale to larger number for precision */
> > +	scaled_lo_freq = lo_freq * scale_factor * 100;
> > +	band = max2175_read_bits(ctx, 5, 1, 0);
> > +
> > +	mxm_dbg(ctx, "set_lo_freq: scaled lo_freq %llu lo_freq %llu band 
%d\n",
> > +		scaled_lo_freq, lo_freq, band);
> > +
> > +	switch (band) {
> > +	case MAX2175_BAND_AM:
> > +		if (max2175_read_bit(ctx, 5, 7) == 0)
> > +			lo_mult = 16;
> 
> else is lo_mult = 1. No idea if it is correct, but sounds very small
> output divider for low freq like am band. And on the other-hand local
> oscillator output divider, which I expect this to be, is usually 2 or more.
> 
> > +		break;
> > +	case MAX2175_BAND_FM:
> > +		if (lo_freq <= 74700000) {
> > +			lo_mult = 16;
> 
> No meaning as you set it later 8.
> 
> > +		} else if (lo_freq > 74700000 && lo_freq <= 110000000) {
> > +			loband_bits = 1;
> > +		} else {
> > +			loband_bits = 1;
> > +			vcodiv_bits = 3;
> > +		}
> > +		lo_mult = 8;
> > +		break;
> > +	case MAX2175_BAND_VHF:
> > +		if (lo_freq <= 210000000) {
> > +			loband_bits = 2;
> > +			vcodiv_bits = 2;
> > +		} else {
> > +			loband_bits = 2;
> > +			vcodiv_bits = 1;
> > +		}
> > +		lo_mult = 4;
> > +		break;
> > +	default:
> > +		loband_bits = 3;
> > +		vcodiv_bits = 2;
> > +		lo_mult = 2;
> > +		break;
> > +	}
> > +
> > +	if (band == MAX2175_BAND_L)
> > +		scaled_npf = div_u64(div_u64(scaled_lo_freq, ctx->xtal_freq),
> > +				     lo_mult);
> > +	else
> > +		scaled_npf = div_u64(scaled_lo_freq, ctx->xtal_freq) * 
lo_mult;
> > +
> > +	scaled_npf = div_u64(scaled_npf, 100);
> > +	scaled_integer = div_u64(scaled_npf, scale_factor) * scale_factor;
> > +	int_desired = div_u64(scaled_npf, scale_factor);
> > +	scaled_fraction = scaled_npf - scaled_integer;
> > +	frac_desired = div_u64(scaled_fraction << 20, scale_factor);
> > +
> > +	/* Check CSM is not busy */
> > +	ret = max2175_poll_csm_ready(ctx);
> > +	if (ret)
> > +		return ret;
> > +
> > +	mxm_dbg(ctx, "loband %u vcodiv %u lo_mult %u scaled_npf %llu\n",
> > +		loband_bits, vcodiv_bits, lo_mult, scaled_npf);
> > +	mxm_dbg(ctx, "scaled int %llu frac %llu desired int %u frac %u\n",
> > +		scaled_integer, scaled_fraction, int_desired, frac_desired);
> > +
> > +	/* Write the calculated values to the appropriate registers */
> > +	max2175_write(ctx, 1, int_desired);
> > +	max2175_write_bits(ctx, 2, 3, 0, (frac_desired >> 16) & 0xf);
> > +	max2175_write(ctx, 3, frac_desired >> 8);
> > +	max2175_write(ctx, 4, frac_desired);
> > +	max2175_write_bits(ctx, 5, 3, 2, loband_bits);
> > +	max2175_write_bits(ctx, 6, 7, 6, vcodiv_bits);
> > +	return ret;
> > +}
> 
> That synthesizer config is hard to understand. It seems to be
> fractional-N, with configurable N, K and output divider - like a school
> book example.
> 
>                +----------------------------+
>                v                            |
>       Fref   +----+     +-------+         +------+
>      ------> | PD | --> |  VCO  | ------> | /N.F |
>              +----+     +-------+         +------+
>                           |
>                           |
>                           v
>                         +-------+  Fout
>                         | /Rout | ------>
>                         +-------+
>
> I made following look-up table in order to understand it:
> 
> band      lo freq band vcodiv div_out
>    AM  <  50000000    0      0      16 // reg 5 bit 7 ?
>    FM  <  74700000    0      0      16
>    FM  < 110000000    1      0       8
>    FM  < 160000000    1      3       8
>   VHF  < 210000000    2      2       4
>   VHF  < 600000000    2      1       4
>     L  <2000000000    3      2       2
> 
> "vcodiv" looks unrelated to synth calculation, dunno what it is.
> 
> One which makes calculation very complex looking is that it is based of
> floating point calculus. On integer mathematics you should replace
> fractional part with fractional modulus (usually letter "K" is used for
> fractional modulus on PLL calc).
> 
> So that ends up something like:
> 1) select suitable lo output divider from desired output frequency
> 2) calculate vco frequency
> 3) convert vco frequency to N and K
> * N = Fvco/Fref
> * K = Fvco%Fref
> 4) convert K to control word (looks like << 20)
> 5) program values
> 
> Result should be calculus without scaling.

Thanks for reviewing this part.

I'd like to add that we already have two PLL helpers in the media subsystem, 
in drivers/media/i2c/aptina-pll.c and drivers/media/i2c/smiapp-pll.c. As the 
PLL used here seems to be a classic one, it would make sense to also extract 
the code in a helper function that could be shared between drivers.
Hans Verkuil Nov. 11, 2016, 1:21 p.m. UTC | #3
Hi Ramesh,

A quick review:

On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> This patch adds driver support for MAX2175 chip. This is Maxim
> Integrated's RF to Bits tuner front end chip designed for software-defined
> radio solutions. This driver exposes the tuner as a sub-device instance
> with standard and custom controls to configure the device.
> 
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
> ---
>  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +
>  drivers/media/i2c/Kconfig                          |    4 +
>  drivers/media/i2c/Makefile                         |    2 +
>  drivers/media/i2c/max2175/Kconfig                  |    8 +
>  drivers/media/i2c/max2175/Makefile                 |    4 +
>  drivers/media/i2c/max2175/max2175.c                | 1558 ++++++++++++++++++++
>  drivers/media/i2c/max2175/max2175.h                |  108 ++
>  7 files changed, 1745 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/max2175.txt
>  create mode 100644 drivers/media/i2c/max2175/Kconfig
>  create mode 100644 drivers/media/i2c/max2175/Makefile
>  create mode 100644 drivers/media/i2c/max2175/max2175.c
>  create mode 100644 drivers/media/i2c/max2175/max2175.h
> 

<snip>

> diff --git a/drivers/media/i2c/max2175/max2175.c b/drivers/media/i2c/max2175/max2175.c
> new file mode 100644
> index 0000000..ec45b52
> --- /dev/null
> +++ b/drivers/media/i2c/max2175/max2175.c
> @@ -0,0 +1,1558 @@

<snip>

> +/* Read/Write bit(s) on top of regmap */
> +static int max2175_read(struct max2175 *ctx, u8 idx, u8 *val)
> +{
> +	u32 regval;
> +	int ret = regmap_read(ctx->regmap, idx, &regval);
> +
> +	if (ret)
> +		v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);
> +
> +	*val = regval;

Does regmap_read initialize regval even if it returns an error? If not,
then I would initialize regval to 0 to prevent *val being uninitialized.

> +	return ret;
> +}
> +
> +static int max2175_write(struct max2175 *ctx, u8 idx, u8 val)
> +{
> +	int ret = regmap_write(ctx->regmap, idx, val);
> +
> +	if (ret)
> +		v4l2_err(ctx->client, "write ret(%d): idx 0x%02x val 0x%02x\n",
> +			 ret, idx, val);
> +	return ret;
> +}
> +
> +static u8 max2175_read_bits(struct max2175 *ctx, u8 idx, u8 msb, u8 lsb)
> +{
> +	u8 val;
> +
> +	if (max2175_read(ctx, idx, &val))
> +		return 0;
> +
> +	return max2175_get_bitval(val, msb, lsb);
> +}
> +
> +static bool max2175_read_bit(struct max2175 *ctx, u8 idx, u8 bit)
> +{
> +	return !!max2175_read_bits(ctx, idx, bit, bit);
> +}
> +
> +static int max2175_write_bits(struct max2175 *ctx, u8 idx,
> +			     u8 msb, u8 lsb, u8 newval)
> +{
> +	int ret = regmap_update_bits(ctx->regmap, idx, GENMASK(msb, lsb),
> +				     newval << lsb);
> +
> +	if (ret)
> +		v4l2_err(ctx->client, "wbits ret(%d): idx 0x%02x\n", ret, idx);
> +
> +	return ret;
> +}
> +
> +static int max2175_write_bit(struct max2175 *ctx, u8 idx, u8 bit, u8 newval)
> +{
> +	return max2175_write_bits(ctx, idx, bit, bit, newval);
> +}
> +
> +/* Checks expected pattern every msec until timeout */
> +static int max2175_poll_timeout(struct max2175 *ctx, u8 idx, u8 msb, u8 lsb,
> +				u8 exp_bitval, u32 timeout_ms)
> +{
> +	unsigned int val;
> +
> +	return regmap_read_poll_timeout(ctx->regmap, idx, val,
> +			(max2175_get_bitval(val, msb, lsb) == exp_bitval),
> +			1000, timeout_ms * 1000);
> +}
> +
> +static int max2175_poll_csm_ready(struct max2175 *ctx)
> +{
> +	int ret;
> +
> +	ret = max2175_poll_timeout(ctx, 69, 1, 1, 0, 50);
> +	if (ret)
> +		v4l2_err(ctx->client, "csm not ready\n");
> +
> +	return ret;
> +}
> +
> +#define MAX2175_IS_BAND_AM(ctx)		\
> +	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_AM)
> +
> +#define MAX2175_IS_BAND_VHF(ctx)	\
> +	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_VHF)
> +
> +#define MAX2175_IS_FM_MODE(ctx)		\
> +	(max2175_read_bits(ctx, 12, 5, 4) == 0)
> +
> +#define MAX2175_IS_FMHD_MODE(ctx)	\
> +	(max2175_read_bits(ctx, 12, 5, 4) == 1)
> +
> +#define MAX2175_IS_DAB_MODE(ctx)	\
> +	(max2175_read_bits(ctx, 12, 5, 4) == 2)
> +
> +static int max2175_band_from_freq(u32 freq)
> +{
> +	if (freq >= 144000 && freq <= 26100000)
> +		return MAX2175_BAND_AM;
> +	else if (freq >= 65000000 && freq <= 108000000)
> +		return MAX2175_BAND_FM;
> +	else

No need for these 'else' keywords.

> +		return MAX2175_BAND_VHF;
> +}
> +
> +static int max2175_update_i2s_mode(struct max2175 *ctx, u32 rx_mode,
> +				   u32 i2s_mode)
> +{
> +	max2175_write_bits(ctx, 29, 2, 0, i2s_mode);
> +
> +	/* Based on I2S mode value I2S_WORD_CNT values change */
> +	switch (i2s_mode) {
> +	case MAX2175_I2S_MODE3:
> +		max2175_write_bits(ctx, 30, 6, 0, 1);
> +		break;
> +	case MAX2175_I2S_MODE2:
> +	case MAX2175_I2S_MODE4:
> +		max2175_write_bits(ctx, 30, 6, 0, 0);
> +		break;
> +	case MAX2175_I2S_MODE0:
> +		max2175_write_bits(ctx, 30, 6, 0,
> +			ctx->rx_modes[rx_mode].i2s_word_size);
> +		break;
> +	}
> +	mxm_dbg(ctx, "update_i2s_mode %u, rx_mode %u\n", i2s_mode, rx_mode);
> +	return 0;
> +}
> +
> +static void max2175_i2s_enable(struct max2175 *ctx, bool enable)
> +{
> +	if (enable) {
> +		/* Use old setting */
> +		max2175_write_bits(ctx, 104, 3, 0, ctx->i2s_test);
> +	} else {
> +		/* Cache old setting */
> +		ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
> +		max2175_write_bits(ctx, 104, 3, 0, 9);	/* Keep SCK alive */
> +	}
> +	mxm_dbg(ctx, "i2s %sabled: old val %u\n", enable ? "en" : "dis",
> +		ctx->i2s_test);
> +}
> +
> +static void max2175_set_filter_coeffs(struct max2175 *ctx, u8 m_sel,
> +				      u8 bank, const u16 *coeffs)
> +{
> +	unsigned int i;
> +	u8 coeff_addr, upper_address = 24;
> +
> +	mxm_dbg(ctx, "set_filter_coeffs: m_sel %d bank %d\n", m_sel, bank);
> +	max2175_write_bits(ctx, 114, 5, 4, m_sel);
> +
> +	if (m_sel == 2)
> +		upper_address = 12;
> +
> +	for (i = 0; i < upper_address; i++) {
> +		coeff_addr = i + bank * 24;
> +		max2175_write(ctx, 115, coeffs[i] >> 8);
> +		max2175_write(ctx, 116, coeffs[i]);
> +		max2175_write(ctx, 117, coeff_addr | 1 << 7);
> +	}
> +	max2175_write_bit(ctx, 117, 7, 0);
> +}
> +
> +static void max2175_load_fmeu_1p2(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(fmeu1p2_map); i++)
> +		max2175_write(ctx, fmeu1p2_map[i].idx, fmeu1p2_map[i].val);
> +
> +	ctx->decim_ratio = 36;
> +
> +	/* Load the Channel Filter Coefficients into channel filter bank #2 */
> +	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0, ch_coeff_fmeu);
> +	max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
> +				  eq_coeff_fmeu1_ra02_m6db);
> +}
> +
> +static void max2175_load_dab_1p2(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(dab12_map); i++)
> +		max2175_write(ctx, dab12_map[i].idx, dab12_map[i].val);
> +
> +	ctx->decim_ratio = 1;
> +
> +	/* Load the Channel Filter Coefficients into channel filter bank #2 */
> +	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 2, ch_coeff_dab1);
> +}
> +
> +static void max2175_load_fmna_1p0(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(fmna1p0_map); i++)
> +		max2175_write(ctx, fmna1p0_map[i].idx, fmna1p0_map[i].val);
> +}
> +
> +static void max2175_load_fmna_2p0(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(fmna2p0_map); i++)
> +		max2175_write(ctx, fmna2p0_map[i].idx, fmna2p0_map[i].val);
> +}
> +
> +static void max2175_set_bbfilter(struct max2175 *ctx)
> +{
> +	if (MAX2175_IS_BAND_AM(ctx)) {
> +		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_am);
> +		mxm_dbg(ctx, "set_bbfilter AM: rom %d\n", ctx->rom_bbf_bw_am);
> +	} else if (MAX2175_IS_DAB_MODE(ctx)) {
> +		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_dab);
> +		mxm_dbg(ctx, "set_bbfilter DAB: rom %d\n", ctx->rom_bbf_bw_dab);
> +	} else {
> +		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_fm);
> +		mxm_dbg(ctx, "set_bbfilter FM: rom %d\n", ctx->rom_bbf_bw_fm);
> +	}
> +}
> +
> +static bool max2175_set_csm_mode(struct max2175 *ctx,
> +			  enum max2175_csm_mode new_mode)
> +{
> +	int ret = max2175_poll_csm_ready(ctx);
> +
> +	if (ret)
> +		return ret;
> +
> +	max2175_write_bits(ctx, 0, 2, 0, new_mode);
> +	mxm_dbg(ctx, "set csm new mode %d\n", new_mode);
> +
> +	/* Wait for a fixed settle down time depending on new mode */
> +	switch (new_mode) {
> +	case MAX2175_PRESET_TUNE:
> +		usleep_range(51100, 51500);	/* 51.1ms */
> +		break;
> +	/*
> +	 * Other mode switches need different sleep values depending on band &
> +	 * mode
> +	 */
> +	default:
> +		break;
> +	}
> +
> +	return max2175_poll_csm_ready(ctx);
> +}
> +
> +static int max2175_csm_action(struct max2175 *ctx,
> +			      enum max2175_csm_mode action)
> +{
> +	int ret;
> +
> +	mxm_dbg(ctx, "csm_action: %d\n", action);
> +
> +	/* Other actions can be added in future when needed */
> +	ret = max2175_set_csm_mode(ctx, MAX2175_LOAD_TO_BUFFER);
> +	if (ret)
> +		return ret;
> +	return max2175_set_csm_mode(ctx, MAX2175_PRESET_TUNE);
> +}
> +
> +static int max2175_set_lo_freq(struct max2175 *ctx, u64 lo_freq)
> +{
> +	u64 scaled_lo_freq, scaled_npf, scaled_integer, scaled_fraction;
> +	u32 frac_desired, int_desired, lo_mult = 1;
> +	const u32 scale_factor = 1000000U;
> +	u8 loband_bits = 0, vcodiv_bits = 0;
> +	enum max2175_band band;
> +	int ret;
> +
> +	/* Scale to larger number for precision */
> +	scaled_lo_freq = lo_freq * scale_factor * 100;
> +	band = max2175_read_bits(ctx, 5, 1, 0);
> +
> +	mxm_dbg(ctx, "set_lo_freq: scaled lo_freq %llu lo_freq %llu band %d\n",
> +		scaled_lo_freq, lo_freq, band);
> +
> +	switch (band) {
> +	case MAX2175_BAND_AM:
> +		if (max2175_read_bit(ctx, 5, 7) == 0)
> +			lo_mult = 16;
> +		break;
> +	case MAX2175_BAND_FM:
> +		if (lo_freq <= 74700000) {
> +			lo_mult = 16;
> +		} else if (lo_freq > 74700000 && lo_freq <= 110000000) {
> +			loband_bits = 1;
> +		} else {
> +			loband_bits = 1;
> +			vcodiv_bits = 3;
> +		}
> +		lo_mult = 8;
> +		break;
> +	case MAX2175_BAND_VHF:
> +		if (lo_freq <= 210000000) {
> +			loband_bits = 2;
> +			vcodiv_bits = 2;
> +		} else {
> +			loband_bits = 2;
> +			vcodiv_bits = 1;
> +		}
> +		lo_mult = 4;
> +		break;
> +	default:
> +		loband_bits = 3;
> +		vcodiv_bits = 2;
> +		lo_mult = 2;
> +		break;
> +	}
> +
> +	if (band == MAX2175_BAND_L)
> +		scaled_npf = div_u64(div_u64(scaled_lo_freq, ctx->xtal_freq),
> +				     lo_mult);
> +	else
> +		scaled_npf = div_u64(scaled_lo_freq, ctx->xtal_freq) * lo_mult;
> +
> +	scaled_npf = div_u64(scaled_npf, 100);
> +	scaled_integer = div_u64(scaled_npf, scale_factor) * scale_factor;
> +	int_desired = div_u64(scaled_npf, scale_factor);
> +	scaled_fraction = scaled_npf - scaled_integer;
> +	frac_desired = div_u64(scaled_fraction << 20, scale_factor);
> +
> +	/* Check CSM is not busy */
> +	ret = max2175_poll_csm_ready(ctx);
> +	if (ret)
> +		return ret;
> +
> +	mxm_dbg(ctx, "loband %u vcodiv %u lo_mult %u scaled_npf %llu\n",
> +		loband_bits, vcodiv_bits, lo_mult, scaled_npf);
> +	mxm_dbg(ctx, "scaled int %llu frac %llu desired int %u frac %u\n",
> +		scaled_integer, scaled_fraction, int_desired, frac_desired);
> +
> +	/* Write the calculated values to the appropriate registers */
> +	max2175_write(ctx, 1, int_desired);
> +	max2175_write_bits(ctx, 2, 3, 0, (frac_desired >> 16) & 0xf);
> +	max2175_write(ctx, 3, frac_desired >> 8);
> +	max2175_write(ctx, 4, frac_desired);
> +	max2175_write_bits(ctx, 5, 3, 2, loband_bits);
> +	max2175_write_bits(ctx, 6, 7, 6, vcodiv_bits);
> +	return ret;
> +}
> +
> +static int max2175_set_nco_freq(struct max2175 *ctx, s64 nco_freq_desired)
> +{
> +	s64  nco_freq, nco_val_desired;
> +	u64 abs_nco_freq;
> +	const u32 scale_factor = 1000000U;
> +	u32 clock_rate, nco_reg;
> +	int ret;
> +
> +	mxm_dbg(ctx, "set_nco_freq: freq %lld\n", nco_freq_desired);
> +	clock_rate = ctx->xtal_freq / ctx->decim_ratio;
> +	nco_freq = -nco_freq_desired;
> +
> +	if (nco_freq < 0)
> +		abs_nco_freq = -nco_freq;
> +	else
> +		abs_nco_freq = nco_freq;
> +
> +	/* Scale up the values for precision */
> +	if (abs_nco_freq < (clock_rate / 2)) {
> +		nco_val_desired = div_s64(2 * nco_freq * scale_factor,
> +					  clock_rate);
> +	} else {
> +		if (nco_freq < 0)
> +			nco_val_desired =
> +			div_s64(-2 * (clock_rate - abs_nco_freq) * scale_factor,
> +				clock_rate);
> +		else
> +			nco_val_desired =
> +			div_s64(2 * (clock_rate - abs_nco_freq) * scale_factor,
> +				clock_rate);
> +	}
> +
> +	/* Scale down to get the fraction */
> +	if (nco_freq < 0)
> +		nco_reg = 0x200000 + div_s64(nco_val_desired << 20,
> +						  scale_factor);
> +	else
> +		nco_reg = div_s64(nco_val_desired << 20, scale_factor);
> +
> +	/* Check CSM is not busy */
> +	ret = max2175_poll_csm_ready(ctx);
> +	if (ret)
> +		return ret;
> +
> +	mxm_dbg(ctx, "clk %u decim %u abs %llu desired %lld reg %u\n",
> +		clock_rate, ctx->decim_ratio, abs_nco_freq,
> +		nco_val_desired, nco_reg);
> +
> +	/* Write the calculated values to the appropriate registers */
> +	max2175_write_bits(ctx, 7, 4, 0, (nco_reg >> 16) & 0x1f);
> +	max2175_write(ctx, 8, nco_reg >> 8);
> +	max2175_write(ctx, 9, nco_reg);
> +	return ret;
> +}
> +
> +static int max2175_set_rf_freq_non_am_bands(struct max2175 *ctx, u64 freq,
> +					    u32 lo_pos)
> +{
> +	s64 adj_freq;
> +	u64 low_if_freq;
> +	int ret;
> +
> +	mxm_dbg(ctx, "rf_freq: non AM bands\n");
> +
> +	if (MAX2175_IS_FM_MODE(ctx))
> +		low_if_freq = 128000;
> +	else if (MAX2175_IS_FMHD_MODE(ctx))
> +		low_if_freq = 228000;
> +	else
> +		return max2175_set_lo_freq(ctx, freq);
> +
> +	if (MAX2175_IS_BAND_VHF(ctx) == (lo_pos == MAX2175_LO_ABOVE_DESIRED))
> +		adj_freq = freq + low_if_freq;
> +	else
> +		adj_freq = freq - low_if_freq;
> +
> +	ret = max2175_set_lo_freq(ctx, adj_freq);
> +	if (ret)
> +		return ret;
> +
> +	return max2175_set_nco_freq(ctx, low_if_freq);
> +}
> +
> +static int max2175_set_rf_freq(struct max2175 *ctx, u64 freq, u32 lo_pos)
> +{
> +	int ret;
> +
> +	if (MAX2175_IS_BAND_AM(ctx))
> +		ret = max2175_set_nco_freq(ctx, freq);
> +	else
> +		ret = max2175_set_rf_freq_non_am_bands(ctx, freq, lo_pos);
> +
> +	mxm_dbg(ctx, "set_rf_freq: ret %d freq %llu\n", ret, freq);
> +	return ret;
> +}
> +
> +static int max2175_tune_rf_freq(struct max2175 *ctx, u64 freq, u32 hsls)
> +{
> +	int ret;
> +
> +	ret = max2175_set_rf_freq(ctx, freq, hsls);
> +	if (ret)
> +		return ret;
> +
> +	ret = max2175_csm_action(ctx, MAX2175_BUFFER_PLUS_PRESET_TUNE);
> +	if (ret)
> +		return ret;
> +
> +	mxm_dbg(ctx, "tune_rf_freq: old %u new %llu\n", ctx->freq, freq);
> +	ctx->freq = freq;
> +	return ret;
> +}
> +
> +static void max2175_set_hsls(struct max2175 *ctx, u32 lo_pos)
> +{
> +	mxm_dbg(ctx, "set_hsls: lo_pos %u\n", lo_pos);
> +
> +	if ((lo_pos == MAX2175_LO_BELOW_DESIRED) == MAX2175_IS_BAND_VHF(ctx))
> +		max2175_write_bit(ctx, 5, 4, 1);
> +	else
> +		max2175_write_bit(ctx, 5, 4, 0);
> +}
> +
> +static void max2175_set_eu_rx_mode(struct max2175 *ctx, u32 rx_mode)
> +{
> +	switch (rx_mode) {
> +	case MAX2175_EU_FM_1_2:
> +		max2175_load_fmeu_1p2(ctx);
> +		break;
> +
> +	case MAX2175_DAB_1_2:
> +		max2175_load_dab_1p2(ctx);
> +		break;
> +	}
> +	/* Master is the default setting */
> +	if (!ctx->master)
> +		max2175_write_bit(ctx, 30, 7, 1);
> +
> +	/* Cache i2s_test value at this point */
> +	ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
> +}
> +
> +static void max2175_set_na_rx_mode(struct max2175 *ctx, u32 rx_mode)
> +{
> +	switch (rx_mode) {
> +	case MAX2175_NA_FM_1_0:
> +		max2175_load_fmna_1p0(ctx);
> +		break;
> +	case MAX2175_NA_FM_2_0:
> +		max2175_load_fmna_2p0(ctx);
> +		break;
> +	}
> +	/* Master is the default setting */
> +	if (!ctx->master)
> +		max2175_write_bit(ctx, 30, 7, 1);
> +
> +	/* Cache i2s_test value at this point */
> +	ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
> +	ctx->decim_ratio = 27;
> +
> +	/* Load the Channel Filter Coefficients into channel filter bank #2 */
> +	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0, ch_coeff_fmna);
> +	max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
> +				  eq_coeff_fmna1_ra02_m6db);
> +}
> +
> +static int max2175_set_rx_mode(struct max2175 *ctx, u32 rx_mode, u32 hsls)
> +{
> +	mxm_dbg(ctx, "set_rx_mode: %u am_hiz %u\n", rx_mode, ctx->am_hiz);
> +	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ)
> +		max2175_set_eu_rx_mode(ctx, rx_mode);
> +	else
> +		max2175_set_na_rx_mode(ctx, rx_mode);
> +
> +	if (ctx->am_hiz) {
> +		mxm_dbg(ctx, "setting AM HiZ related config\n");
> +		max2175_write_bit(ctx, 50, 5, 1);
> +		max2175_write_bit(ctx, 90, 7, 1);
> +		max2175_write_bits(ctx, 73, 1, 0, 2);
> +		max2175_write_bits(ctx, 80, 5, 0, 33);
> +	}
> +
> +	/* Load BB filter trim values saved in ROM */
> +	max2175_set_bbfilter(ctx);
> +
> +	/* Set HSLS */
> +	max2175_set_hsls(ctx, hsls);
> +
> +	ctx->mode_resolved = true;
> +	return 0;
> +}
> +
> +static bool max2175_i2s_rx_mode_valid(struct max2175 *ctx,
> +					 u32 mode, u32 i2s_mode)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(ctx->rx_modes[mode].i2s_modes); i++)
> +		if (ctx->rx_modes[mode].i2s_modes[i] == i2s_mode)
> +			return true;
> +
> +	v4l2_err(ctx->client, "i2s_mode %u not suitable for cur rx mode %u\n",
> +		 i2s_mode, mode);
> +	return false;
> +}
> +
> +static int max2175_rx_mode_from_freq(struct max2175 *ctx, u32 freq, u32 *mode)
> +{
> +	unsigned int i;
> +	int band = max2175_band_from_freq(freq);
> +
> +	/* Pick the first match always */
> +	for (i = 0; i <= ctx->rx_mode->maximum; i++) {
> +		if (ctx->rx_modes[i].band == band) {
> +			*mode = i;
> +			mxm_dbg(ctx, "rx_mode_from_freq: freq %u mode %d\n",
> +				freq, *mode);
> +			return 0;
> +		}
> +	}
> +	return -EINVAL;
> +}
> +
> +static bool max2175_freq_rx_mode_valid(struct max2175 *ctx,
> +					 u32 mode, u32 freq)
> +{
> +	int band = max2175_band_from_freq(freq);
> +
> +	return (ctx->rx_modes[mode].band == band);
> +}
> +
> +static void max2175_load_adc_presets(struct max2175 *ctx)
> +{
> +	unsigned int i, j;
> +
> +	for (i = 0; i < 2; i++)
> +		for (j = 0; j < 23; j++)
> +			max2175_write(ctx, 146 + j + i * 55, adc_presets[i][j]);
> +}
> +
> +static int max2175_init_power_manager(struct max2175 *ctx)
> +{
> +	int ret;
> +
> +	/* Execute on-chip power-up/calibration */
> +	max2175_write_bit(ctx, 99, 2, 0);
> +	usleep_range(1000, 1500);
> +	max2175_write_bit(ctx, 99, 2, 1);
> +
> +	/* Wait for the power manager to finish. */
> +	ret = max2175_poll_timeout(ctx, 69, 7, 7, 1, 50);
> +	if (ret)
> +		v4l2_err(ctx->client, "init pm failed\n");
> +	return ret;
> +}
> +
> +static int max2175_recalibrate_adc(struct max2175 *ctx)
> +{
> +	int ret;
> +
> +	/* ADC Re-calibration */
> +	max2175_write(ctx, 150, 0xff);
> +	max2175_write(ctx, 205, 0xff);
> +	max2175_write(ctx, 147, 0x20);
> +	max2175_write(ctx, 147, 0x00);
> +	max2175_write(ctx, 202, 0x20);
> +	max2175_write(ctx, 202, 0x00);
> +
> +	ret = max2175_poll_timeout(ctx, 69, 4, 3, 3, 50);
> +	if (ret)
> +		v4l2_err(ctx->client, "adc recalibration failed\n");
> +	return ret;
> +}
> +
> +static u8 max2175_read_rom(struct max2175 *ctx, u8 row)
> +{
> +	u8 data;
> +
> +	max2175_write_bit(ctx, 56, 4, 0);
> +	max2175_write_bits(ctx, 56, 3, 0, row);
> +
> +	usleep_range(2000, 2500);
> +	max2175_read(ctx, 58, &data);
> +
> +	max2175_write_bits(ctx, 56, 3, 0, 0);
> +
> +	mxm_dbg(ctx, "read_rom: row %d data 0x%02x\n", row, data);
> +	return data;
> +}
> +
> +static void max2175_load_from_rom(struct max2175 *ctx)
> +{
> +	u8 data = 0;
> +
> +	data = max2175_read_rom(ctx, 0);
> +	ctx->rom_bbf_bw_am = data & 0x0f;
> +	max2175_write_bits(ctx, 81, 3, 0, data >> 4);
> +
> +	data = max2175_read_rom(ctx, 1);
> +	ctx->rom_bbf_bw_fm = data & 0x0f;
> +	ctx->rom_bbf_bw_dab = data >> 4;
> +
> +	data = max2175_read_rom(ctx, 2);
> +	max2175_write_bits(ctx, 82, 4, 0, data & 0x1f);
> +	max2175_write_bits(ctx, 82, 7, 5, data >> 5);
> +
> +	data = max2175_read_rom(ctx, 3);
> +	if (ctx->am_hiz) {
> +		data &= 0x0f;
> +		data |= max2175_read_rom(ctx, 7) & 0x40 >> 2;
> +		if (!data)
> +			data |= 2;
> +	} else {
> +		data = data & 0xf0 >> 4;
> +		data |= max2175_read_rom(ctx, 7) & 0x80 >> 3;
> +		if (!data)
> +			data |= 30;
> +	}
> +	max2175_write_bits(ctx, 80, 5, 0, data + 31);
> +
> +	data = max2175_read_rom(ctx, 6);
> +	max2175_write_bits(ctx, 81, 7, 6, data >> 6);
> +}
> +
> +static void max2175_load_full_fm_eu_1p0(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(full_fm_eu_1p0); i++)
> +		max2175_write(ctx, i + 1, full_fm_eu_1p0[i]);
> +
> +	usleep_range(5000, 5500);
> +	ctx->decim_ratio = 36;
> +}
> +
> +static void max2175_load_full_fm_na_1p0(struct max2175 *ctx)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(full_fm_na_1p0); i++)
> +		max2175_write(ctx, i + 1, full_fm_na_1p0[i]);
> +
> +	usleep_range(5000, 5500);
> +	ctx->decim_ratio = 27;
> +}
> +
> +static int max2175_core_init(struct max2175 *ctx, u32 refout_bits)
> +{
> +	int ret;
> +
> +	/* MAX2175 uses 36.864MHz clock for EU & 40.154MHz for NA region */
> +	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ)
> +		max2175_load_full_fm_eu_1p0(ctx);
> +	else
> +		max2175_load_full_fm_na_1p0(ctx);
> +
> +	/* The default settings assume master */
> +	if (!ctx->master)
> +		max2175_write_bit(ctx, 30, 7, 1);
> +
> +	mxm_dbg(ctx, "refout_bits %u\n", refout_bits);
> +
> +	/* Set REFOUT */
> +	max2175_write_bits(ctx, 56, 7, 5, refout_bits);
> +
> +	/* ADC Reset */
> +	max2175_write_bit(ctx, 99, 1, 0);
> +	usleep_range(1000, 1500);
> +	max2175_write_bit(ctx, 99, 1, 1);
> +
> +	/* Load ADC preset values */
> +	max2175_load_adc_presets(ctx);
> +
> +	/* Initialize the power management state machine */
> +	ret = max2175_init_power_manager(ctx);
> +	if (ret)
> +		return ret;
> +
> +	/* Recalibrate ADC */
> +	ret = max2175_recalibrate_adc(ctx);
> +	if (ret)
> +		return ret;
> +
> +	/* Load ROM values to appropriate registers */
> +	max2175_load_from_rom(ctx);
> +
> +	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ) {
> +		/* Load FIR coefficients into bank 0 */
> +		max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0,
> +					  ch_coeff_fmeu);
> +		max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
> +					  eq_coeff_fmeu1_ra02_m6db);
> +	} else {
> +		/* Load FIR coefficients into bank 0 */
> +		max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0,
> +					  ch_coeff_fmna);
> +		max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
> +					  eq_coeff_fmna1_ra02_m6db);
> +	}
> +	mxm_dbg(ctx, "core initialized\n");
> +	return 0;
> +}
> +
> +static void max2175_s_ctrl_i2s_mode(struct max2175 *ctx, u32 i2s_mode)
> +{
> +	mxm_dbg(ctx, "s_ctrl_i2s_mode: %u resolved %d\n", i2s_mode,
> +		ctx->mode_resolved);
> +
> +	/*
> +	 * Update i2s mode on device only when mode is resolved & it is valid
> +	 * for the configured mode
> +	 */
> +	if (ctx->mode_resolved &&
> +	    max2175_i2s_rx_mode_valid(ctx, ctx->rx_mode->val, i2s_mode))
> +		max2175_update_i2s_mode(ctx, ctx->rx_mode->val, i2s_mode);
> +}
> +
> +static void max2175_s_ctrl_rx_mode(struct max2175 *ctx, u32 rx_mode)
> +{
> +	/* Load mode. Range check already done */
> +	max2175_set_rx_mode(ctx, rx_mode, ctx->hsls->val);
> +
> +	/* Get current i2s_mode and update if needed for given rx_mode */
> +	if (max2175_i2s_rx_mode_valid(ctx, rx_mode, ctx->i2s_mode->val))
> +		max2175_update_i2s_mode(ctx, rx_mode, ctx->i2s_mode->val);
> +	else
> +		ctx->i2s_mode->val = max2175_read_bits(ctx, 29, 2, 0);
> +
> +	mxm_dbg(ctx, "s_ctrl_rx_mode: %u curr freq %u\n", rx_mode, ctx->freq);
> +
> +	/* Check if current freq valid for mode & update */
> +	if (max2175_freq_rx_mode_valid(ctx, rx_mode, ctx->freq))
> +		max2175_tune_rf_freq(ctx, ctx->freq, ctx->hsls->val);
> +	else
> +		/* Use default freq of mode if current freq is not valid */
> +		max2175_tune_rf_freq(ctx, ctx->rx_modes[rx_mode].freq,
> +				     ctx->hsls->val);
> +}
> +
> +static int max2175_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct max2175 *ctx = max2175_from_ctrl_hdl(ctrl->handler);
> +	int ret = 0;
> +
> +	mxm_dbg(ctx, "s_ctrl: id 0x%x, val %u\n", ctrl->id, ctrl->val);
> +	switch (ctrl->id) {
> +	case V4L2_CID_MAX2175_I2S_ENABLE:
> +		max2175_i2s_enable(ctx, ctrl->val == 1);
> +		break;
> +	case V4L2_CID_MAX2175_I2S_MODE:
> +		max2175_s_ctrl_i2s_mode(ctx, ctrl->val);
> +		break;
> +	case V4L2_CID_MAX2175_HSLS:
> +		max2175_set_hsls(ctx, ctx->hsls->val);
> +		break;
> +	case V4L2_CID_MAX2175_RX_MODE:
> +		max2175_s_ctrl_rx_mode(ctx, ctrl->val);
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int max2175_get_lna_gain(struct max2175 *ctx)
> +{
> +	int gain = 0;
> +	enum max2175_band band = max2175_read_bits(ctx, 5, 1, 0);
> +
> +	switch (band) {
> +	case MAX2175_BAND_AM:
> +		gain = max2175_read_bits(ctx, 51, 3, 1);
> +		break;
> +	case MAX2175_BAND_FM:
> +		gain = max2175_read_bits(ctx, 50, 3, 1);
> +		break;
> +	case MAX2175_BAND_VHF:
> +		gain = max2175_read_bits(ctx, 52, 3, 0);
> +		break;
> +	default:
> +		break;
> +	}
> +	return gain;
> +}
> +
> +static int max2175_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct max2175 *ctx = max2175_from_ctrl_hdl(ctrl->handler);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_RF_TUNER_LNA_GAIN:
> +		ctrl->val = max2175_get_lna_gain(ctx);
> +		break;
> +	case V4L2_CID_RF_TUNER_IF_GAIN:
> +		ctrl->val = max2175_read_bits(ctx, 49, 4, 0);
> +		break;
> +	case V4L2_CID_RF_TUNER_PLL_LOCK:
> +		ctrl->val = (max2175_read_bits(ctx, 60, 7, 6) == 3);
> +		break;
> +	}
> +	mxm_dbg(ctx, "g_volatile_ctrl: id 0x%x val %d\n", ctrl->id, ctrl->val);
> +	return 0;
> +};
> +
> +static int max2175_set_freq_and_mode(struct max2175 *ctx, u32 freq)
> +{
> +	u32 rx_mode;
> +	int ret;
> +
> +	/* Get band from frequency */
> +	ret = max2175_rx_mode_from_freq(ctx, freq, &rx_mode);
> +	if (ret)
> +		return ret;
> +
> +	mxm_dbg(ctx, "set_freq_and_mode: freq %u rx_mode %d\n", freq, rx_mode);
> +
> +	/* Load mode */
> +	max2175_set_rx_mode(ctx, rx_mode, ctx->hsls->val);
> +	ctx->rx_mode->val = rx_mode;
> +
> +	/* Get current i2s_mode and update if needed for given rx_mode */
> +	if (max2175_i2s_rx_mode_valid(ctx, rx_mode, ctx->i2s_mode->val))
> +		max2175_update_i2s_mode(ctx, rx_mode, ctx->i2s_mode->val);
> +	else
> +		ctx->i2s_mode->val = max2175_read_bits(ctx, 29, 2, 0);
> +
> +	/* Tune to the new freq given */
> +	return max2175_tune_rf_freq(ctx, freq, ctx->hsls->val);
> +}
> +
> +static int max2175_s_frequency(struct v4l2_subdev *sd,
> +			       const struct v4l2_frequency *vf)
> +{
> +	struct max2175 *ctx = max2175_from_sd(sd);
> +	u32 freq;
> +	int ret = 0;
> +
> +	mxm_dbg(ctx, "s_freq: new %u curr %u, mode_resolved %d\n",
> +		vf->frequency, ctx->freq, ctx->mode_resolved);
> +
> +	if (vf->tuner != 0)
> +		return -EINVAL;
> +
> +	freq = clamp(vf->frequency, ctx->bands_rf->rangelow,
> +		     ctx->bands_rf->rangehigh);
> +
> +	/* Check new freq valid for rx_mode if already resolved */
> +	if (ctx->mode_resolved &&
> +	    max2175_freq_rx_mode_valid(ctx, ctx->rx_mode->val, freq))
> +		ret = max2175_tune_rf_freq(ctx, freq, ctx->hsls->val);
> +	else
> +		/* Find default rx_mode for freq and tune to it */
> +		ret = max2175_set_freq_and_mode(ctx, freq);
> +
> +	mxm_dbg(ctx, "s_freq: ret %d curr %u mode_resolved %d mode %u\n",
> +		ret, ctx->freq, ctx->mode_resolved, ctx->rx_mode->val);
> +	return ret;
> +}
> +
> +static int max2175_g_frequency(struct v4l2_subdev *sd,
> +			       struct v4l2_frequency *vf)
> +{
> +	struct max2175 *ctx = max2175_from_sd(sd);
> +	int ret = 0;
> +
> +	if (vf->tuner != 0)
> +		return -EINVAL;
> +
> +	/* RF freq */
> +	vf->type = V4L2_TUNER_RF;
> +	vf->frequency = ctx->freq;
> +	return ret;
> +}
> +
> +static int max2175_enum_freq_bands(struct v4l2_subdev *sd,
> +			    struct v4l2_frequency_band *band)
> +{
> +	struct max2175 *ctx = max2175_from_sd(sd);
> +
> +	if (band->tuner == 0 && band->index == 0)
> +		*band = *ctx->bands_rf;
> +	else
> +		return -EINVAL;

This is a bit ugly. I would invert the condition and return -EINVAL.
Then assign *band and return 0.

> +
> +	return 0;
> +}
> +
> +static int max2175_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
> +{
> +	struct max2175 *ctx = max2175_from_sd(sd);
> +
> +	if (vt->index > 0)
> +		return -EINVAL;
> +
> +	strlcpy(vt->name, "RF", sizeof(vt->name));
> +	vt->type = V4L2_TUNER_RF;
> +	vt->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
> +	vt->rangelow = ctx->bands_rf->rangelow;
> +	vt->rangehigh = ctx->bands_rf->rangehigh;
> +	return 0;
> +}
> +
> +static int max2175_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
> +{
> +	/* Check tuner index is valid */
> +	if (vt->index > 0)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_tuner_ops max2175_tuner_ops = {
> +	.s_frequency = max2175_s_frequency,
> +	.g_frequency = max2175_g_frequency,
> +	.enum_freq_bands = max2175_enum_freq_bands,
> +	.g_tuner = max2175_g_tuner,
> +	.s_tuner = max2175_s_tuner,
> +};
> +
> +static const struct v4l2_subdev_ops max2175_ops = {
> +	.tuner = &max2175_tuner_ops,
> +};
> +
> +static const struct v4l2_ctrl_ops max2175_ctrl_ops = {
> +	.s_ctrl = max2175_s_ctrl,
> +	.g_volatile_ctrl = max2175_g_volatile_ctrl,
> +};
> +
> +static const struct v4l2_ctrl_config max2175_i2s_en = {
> +	.ops = &max2175_ctrl_ops,
> +	.id = V4L2_CID_MAX2175_I2S_ENABLE,
> +	.name = "I2S Enable",
> +	.type = V4L2_CTRL_TYPE_BOOLEAN,
> +	.min = 0,
> +	.max = 1,
> +	.step = 1,
> +	.def = 1,
> +};
> +
> +static const char * const max2175_ctrl_i2s_modes[] = {
> +	[MAX2175_I2S_MODE0]	= "i2s mode 0",
> +	[MAX2175_I2S_MODE1]	= "i2s mode 1 (skipped)",
> +	[MAX2175_I2S_MODE2]	= "i2s mode 2",
> +	[MAX2175_I2S_MODE3]	= "i2s mode 3",
> +	[MAX2175_I2S_MODE4]	= "i2s mode 4",
> +};
> +
> +static const struct v4l2_ctrl_config max2175_i2s_mode = {
> +	.ops = &max2175_ctrl_ops,
> +	.id = V4L2_CID_MAX2175_I2S_MODE,
> +	.name = "I2S MODE value",
> +	.type = V4L2_CTRL_TYPE_MENU,
> +	.max = ARRAY_SIZE(max2175_ctrl_i2s_modes) - 1,
> +	.def = 0,
> +	.menu_skip_mask = 0x02,
> +	.qmenu = max2175_ctrl_i2s_modes,
> +};

Is this something that is changed dynamically? It looks more like a
device tree thing (it's not clear what it does, so obviously I
can't be sure).

> +
> +static const struct v4l2_ctrl_config max2175_hsls = {
> +	.ops = &max2175_ctrl_ops,
> +	.id = V4L2_CID_MAX2175_HSLS,
> +	.name = "HSLS above/below desired",
> +	.type = V4L2_CTRL_TYPE_INTEGER,
> +	.min = 0,
> +	.max = 1,
> +	.step = 1,
> +	.def = 1,
> +};
> +
> +static const char * const max2175_ctrl_eu_rx_modes[] = {
> +	[MAX2175_EU_FM_1_2]	= "EU FM 1.2",
> +	[MAX2175_DAB_1_2]	= "DAB 1.2",
> +};
> +
> +static const char * const max2175_ctrl_na_rx_modes[] = {
> +	[MAX2175_NA_FM_1_0]	= "NA FM 1.0",
> +	[MAX2175_NA_FM_2_0]	= "NA FM 2.0",
> +};
> +
> +static const struct v4l2_ctrl_config max2175_eu_rx_mode = {
> +	.ops = &max2175_ctrl_ops,
> +	.id = V4L2_CID_MAX2175_RX_MODE,
> +	.name = "RX MODE",
> +	.type = V4L2_CTRL_TYPE_MENU,
> +	.max = ARRAY_SIZE(max2175_ctrl_eu_rx_modes) - 1,
> +	.def = 0,
> +	.qmenu = max2175_ctrl_eu_rx_modes,
> +};
> +
> +static const struct v4l2_ctrl_config max2175_na_rx_mode = {
> +	.ops = &max2175_ctrl_ops,
> +	.id = V4L2_CID_MAX2175_RX_MODE,
> +	.name = "RX MODE",
> +	.type = V4L2_CTRL_TYPE_MENU,
> +	.max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
> +	.def = 0,
> +	.qmenu = max2175_ctrl_na_rx_modes,
> +};

Please document all these controls better. This is part of the public API, so
you need to give more information what this means exactly.

> +
> +static int max2175_refout_load_to_bits(struct i2c_client *client, u32 load,
> +				       u32 *bits)
> +{
> +	if (load >= 0 && load <= 40)
> +		*bits = load / 10;
> +	else if (load >= 60 && load <= 70)
> +		*bits = load / 10 - 1;
> +	else
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int max2175_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct max2175 *ctx;
> +	struct v4l2_subdev *sd;
> +	struct v4l2_ctrl_handler *hdl;
> +	struct clk *clk;
> +	struct regmap *regmap;
> +	bool master = true, am_hiz = false;
> +	u32 refout_load, refout_bits = 0;	/* REFOUT disabled */
> +	int ret;
> +
> +	/* Parse DT properties */
> +	if (of_find_property(client->dev.of_node, "maxim,slave", NULL))
> +		master = false;
> +
> +	if (of_find_property(client->dev.of_node, "maxim,am-hiz", NULL))
> +		am_hiz = true;
> +
> +	if (!of_property_read_u32(client->dev.of_node, "maxim,refout-load-pF",
> +				  &refout_load)) {
> +		ret = max2175_refout_load_to_bits(client, refout_load,
> +						  &refout_bits);
> +		if (ret) {
> +			dev_err(&client->dev, "invalid refout_load %u\n",
> +				refout_load);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	clk = devm_clk_get(&client->dev, "xtal");
> +	if (IS_ERR(clk)) {
> +		ret = PTR_ERR(clk);
> +		dev_err(&client->dev, "cannot get xtal clock %d\n", ret);
> +		return -ENODEV;
> +	}
> +
> +	regmap = devm_regmap_init_i2c(client, &max2175_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		ret = PTR_ERR(regmap);
> +		dev_err(&client->dev, "regmap init failed %d\n", ret);
> +		return -ENODEV;
> +	}
> +
> +	/* Alloc tuner context */
> +	ctx = devm_kzalloc(&client->dev, sizeof(*ctx), GFP_KERNEL);
> +	if (ctx == NULL)
> +		return -ENOMEM;
> +
> +	sd = &ctx->sd;
> +	ctx->master = master;
> +	ctx->am_hiz = am_hiz;
> +	ctx->mode_resolved = false;
> +	ctx->regmap = regmap;
> +	ctx->xtal_freq = clk_get_rate(clk);
> +	dev_info(&client->dev, "xtal freq %luHz\n", ctx->xtal_freq);
> +
> +	v4l2_i2c_subdev_init(sd, client, &max2175_ops);
> +	ctx->client = client;
> +
> +	sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> +	/* Controls */
> +	hdl = &ctx->ctrl_hdl;
> +	ret = v4l2_ctrl_handler_init(hdl, 7);
> +	if (ret) {
> +		dev_err(&client->dev, "ctrl handler init failed\n");
> +		goto err;
> +	}
> +
> +	ctx->lna_gain = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
> +					  V4L2_CID_RF_TUNER_LNA_GAIN,
> +					  0, 15, 1, 2);
> +	ctx->lna_gain->flags |= (V4L2_CTRL_FLAG_VOLATILE |
> +				 V4L2_CTRL_FLAG_READ_ONLY);
> +	ctx->if_gain = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
> +					 V4L2_CID_RF_TUNER_IF_GAIN,
> +					 0, 31, 1, 0);
> +	ctx->if_gain->flags |= (V4L2_CTRL_FLAG_VOLATILE |
> +				V4L2_CTRL_FLAG_READ_ONLY);
> +	ctx->pll_lock = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
> +					  V4L2_CID_RF_TUNER_PLL_LOCK,
> +					  0, 1, 1, 0);
> +	ctx->pll_lock->flags |= (V4L2_CTRL_FLAG_VOLATILE |
> +				 V4L2_CTRL_FLAG_READ_ONLY);
> +	ctx->i2s_en = v4l2_ctrl_new_custom(hdl, &max2175_i2s_en, NULL);
> +	ctx->i2s_mode = v4l2_ctrl_new_custom(hdl, &max2175_i2s_mode, NULL);
> +	ctx->hsls = v4l2_ctrl_new_custom(hdl, &max2175_hsls, NULL);
> +
> +	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ) {
> +		ctx->rx_mode = v4l2_ctrl_new_custom(hdl,
> +						    &max2175_eu_rx_mode, NULL);
> +		ctx->rx_modes = eu_rx_modes;
> +		ctx->bands_rf = &eu_bands_rf;
> +	} else {
> +		ctx->rx_mode = v4l2_ctrl_new_custom(hdl,
> +						    &max2175_na_rx_mode, NULL);
> +		ctx->rx_modes = na_rx_modes;
> +		ctx->bands_rf = &na_bands_rf;
> +	}
> +	ctx->sd.ctrl_handler = &ctx->ctrl_hdl;
> +
> +	/* Set the defaults */
> +	ctx->freq = ctx->bands_rf->rangelow;
> +
> +	/* Register subdev */
> +	ret = v4l2_async_register_subdev(sd);
> +	if (ret) {
> +		dev_err(&client->dev, "register subdev failed\n");
> +		goto err_reg;
> +	}
> +
> +	/* Initialize device */
> +	ret = max2175_core_init(ctx, refout_bits);
> +	if (ret)
> +		goto err_init;
> +
> +	dev_info(&client->dev, "probed\n");
> +	return 0;
> +
> +err_init:
> +	v4l2_async_unregister_subdev(sd);
> +err_reg:
> +	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> +err:
> +	return ret;
> +}
> +
> +static int max2175_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct max2175 *ctx = max2175_from_sd(sd);
> +
> +	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> +	v4l2_async_unregister_subdev(sd);
> +	dev_info(&client->dev, "removed\n");
> +	return 0;
> +}
> +
> +static const struct i2c_device_id max2175_id[] = {
> +	{ DRIVER_NAME, 0},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, max2175_id);
> +
> +static const struct of_device_id max2175_of_ids[] = {
> +	{ .compatible = "maxim, max2175", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, max2175_of_ids);
> +
> +static struct i2c_driver max2175_driver = {
> +	.driver = {
> +		.name	= DRIVER_NAME,
> +		.of_match_table = max2175_of_ids,
> +	},
> +	.probe		= max2175_probe,
> +	.remove		= max2175_remove,
> +	.id_table	= max2175_id,
> +};
> +
> +module_i2c_driver(max2175_driver);
> +
> +MODULE_DESCRIPTION("Maxim MAX2175 RF to Bits tuner driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>");
> diff --git a/drivers/media/i2c/max2175/max2175.h b/drivers/media/i2c/max2175/max2175.h
> new file mode 100644
> index 0000000..2d858aa
> --- /dev/null
> +++ b/drivers/media/i2c/max2175/max2175.h
> @@ -0,0 +1,108 @@
> +/*
> + * Maxim Integrated MAX2175 RF to Bits tuner driver
> + *
> + * This driver & most of the hard coded values are based on the reference
> + * application delivered by Maxim for this chip.
> + *
> + * Copyright (C) 2016 Maxim Integrated Products
> + * Copyright (C) 2016 Renesas Electronics Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MAX2175_H__
> +#define __MAX2175_H__
> +
> +#define MAX2175_EU_XTAL_FREQ	36864000	/* In Hz */
> +#define MAX2175_NA_XTAL_FREQ	40186125	/* In Hz */
> +
> +enum max2175_region {
> +	MAX2175_REGION_EU = 0,	/* Europe */
> +	MAX2175_REGION_NA,	/* North America */
> +};
> +
> +
> +enum max2175_band {
> +	MAX2175_BAND_AM = 0,
> +	MAX2175_BAND_FM,
> +	MAX2175_BAND_VHF,
> +	MAX2175_BAND_L,
> +};
> +
> +enum max2175_eu_mode {
> +	/* EU modes */
> +	MAX2175_EU_FM_1_2 = 0,
> +	MAX2175_DAB_1_2,
> +
> +	/* Other possible modes to add in future
> +	 * MAX2175_DAB_1_0,
> +	 * MAX2175_DAB_1_3,
> +	 * MAX2175_EU_FM_2_2,
> +	 * MAX2175_EU_FMHD_4_0,
> +	 * MAX2175_EU_AM_1_0,
> +	 * MAX2175_EU_AM_2_2,
> +	 */
> +};
> +
> +enum max2175_na_mode {
> +	/* NA modes */
> +	MAX2175_NA_FM_1_0 = 0,
> +	MAX2175_NA_FM_2_0,
> +
> +	/* Other possible modes to add in future
> +	 * MAX2175_NA_FMHD_1_0,
> +	 * MAX2175_NA_FMHD_1_2,
> +	 * MAX2175_NA_AM_1_0,
> +	 * MAX2175_NA_AM_1_2,
> +	 */
> +};
> +
> +/* Supported I2S modes */
> +enum {
> +	MAX2175_I2S_MODE0 = 0,
> +	MAX2175_I2S_MODE1,
> +	MAX2175_I2S_MODE2,
> +	MAX2175_I2S_MODE3,
> +	MAX2175_I2S_MODE4,
> +};
> +
> +/* Coefficient table groups */
> +enum {
> +	MAX2175_CH_MSEL = 0,
> +	MAX2175_EQ_MSEL,
> +	MAX2175_AA_MSEL,
> +};
> +
> +/* HSLS LO injection polarity */
> +enum {
> +	MAX2175_LO_BELOW_DESIRED = 0,
> +	MAX2175_LO_ABOVE_DESIRED,
> +};
> +
> +/* Channel FSM modes */
> +enum max2175_csm_mode {
> +	MAX2175_LOAD_TO_BUFFER = 0,
> +	MAX2175_PRESET_TUNE,
> +	MAX2175_SEARCH,
> +	MAX2175_AF_UPDATE,
> +	MAX2175_JUMP_FAST_TUNE,
> +	MAX2175_CHECK,
> +	MAX2175_LOAD_AND_SWAP,
> +	MAX2175_END,
> +	MAX2175_BUFFER_PLUS_PRESET_TUNE,
> +	MAX2175_BUFFER_PLUS_SEARCH,
> +	MAX2175_BUFFER_PLUS_AF_UPDATE,
> +	MAX2175_BUFFER_PLUS_JUMP_FAST_TUNE,
> +	MAX2175_BUFFER_PLUS_CHECK,
> +	MAX2175_BUFFER_PLUS_LOAD_AND_SWAP,
> +	MAX2175_NO_ACTION
> +};
> +
> +#endif /* __MAX2175_H__ */
> 

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Laurent Pinchart Nov. 11, 2016, 1:48 p.m. UTC | #4
Hi Hans,

On Friday 11 Nov 2016 14:21:22 Hans Verkuil wrote:
> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> > This patch adds driver support for MAX2175 chip. This is Maxim
> > Integrated's RF to Bits tuner front end chip designed for software-defined
> > radio solutions. This driver exposes the tuner as a sub-device instance
> > with standard and custom controls to configure the device.
> > 
> > Signed-off-by: Ramesh Shanmugasundaram
> > <ramesh.shanmugasundaram@bp.renesas.com> ---
> > 
> >  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +
> >  drivers/media/i2c/Kconfig                          |    4 +
> >  drivers/media/i2c/Makefile                         |    2 +
> >  drivers/media/i2c/max2175/Kconfig                  |    8 +
> >  drivers/media/i2c/max2175/Makefile                 |    4 +
> >  drivers/media/i2c/max2175/max2175.c                | 1558 +++++++++++++++
> >  drivers/media/i2c/max2175/max2175.h                |  108 ++
> >  7 files changed, 1745 insertions(+)
> >  create mode 100644
> >  Documentation/devicetree/bindings/media/i2c/max2175.txt
> >  create mode 100644 drivers/media/i2c/max2175/Kconfig
> >  create mode 100644 drivers/media/i2c/max2175/Makefile
> >  create mode 100644 drivers/media/i2c/max2175/max2175.c
> >  create mode 100644 drivers/media/i2c/max2175/max2175.h
> 
> <snip>
> 
> > diff --git a/drivers/media/i2c/max2175/max2175.c
> > b/drivers/media/i2c/max2175/max2175.c new file mode 100644
> > index 0000000..ec45b52
> > --- /dev/null
> > +++ b/drivers/media/i2c/max2175/max2175.c
> > @@ -0,0 +1,1558 @@
> 
> <snip>
> 
> > +/* Read/Write bit(s) on top of regmap */
> > +static int max2175_read(struct max2175 *ctx, u8 idx, u8 *val)
> > +{
> > +	u32 regval;
> > +	int ret = regmap_read(ctx->regmap, idx, &regval);
> > +
> > +	if (ret)
> > +		v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);

By the way, I think I've seen a proposal to get rid of v4l2_err() in favour of 
dev_err(), was I dreaming or should this patch use dev_err() already ?

> > +
> > +	*val = regval;
> 
> Does regmap_read initialize regval even if it returns an error? If not,
> then I would initialize regval to 0 to prevent *val being uninitialized.

Better than that the error should be propagated to the caller and handled.

> > +	return ret;
> > +}

[snip]

> > +static int max2175_band_from_freq(u32 freq)
> > +{
> > +	if (freq >= 144000 && freq <= 26100000)
> > +		return MAX2175_BAND_AM;
> > +	else if (freq >= 65000000 && freq <= 108000000)
> > +		return MAX2175_BAND_FM;
> > +	else
> 
> No need for these 'else' keywords.

Indeed by in my opinion they improve readability :-)

> > +		return MAX2175_BAND_VHF;
> > +}

[snip]

> > +static const struct v4l2_ctrl_config max2175_na_rx_mode = {
> > +	.ops = &max2175_ctrl_ops,
> > +	.id = V4L2_CID_MAX2175_RX_MODE,
> > +	.name = "RX MODE",
> > +	.type = V4L2_CTRL_TYPE_MENU,
> > +	.max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
> > +	.def = 0,
> > +	.qmenu = max2175_ctrl_na_rx_modes,
> > +};
> 
> Please document all these controls better. This is part of the public API,
> so you need to give more information what this means exactly.

Should that go to Documentation/media/v4l-drivers/ ? If so "[PATCH v4 3/4] 
v4l: Add Renesas R-Car FDP1 Driver" can be used as an example.

[snip]
Hans Verkuil Nov. 11, 2016, 1:58 p.m. UTC | #5
On 11/11/2016 02:48 PM, Laurent Pinchart wrote:
> Hi Hans,
> 
> On Friday 11 Nov 2016 14:21:22 Hans Verkuil wrote:
>> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
>>> This patch adds driver support for MAX2175 chip. This is Maxim
>>> Integrated's RF to Bits tuner front end chip designed for software-defined
>>> radio solutions. This driver exposes the tuner as a sub-device instance
>>> with standard and custom controls to configure the device.
>>>
>>> Signed-off-by: Ramesh Shanmugasundaram
>>> <ramesh.shanmugasundaram@bp.renesas.com> ---
>>>
>>>  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +
>>>  drivers/media/i2c/Kconfig                          |    4 +
>>>  drivers/media/i2c/Makefile                         |    2 +
>>>  drivers/media/i2c/max2175/Kconfig                  |    8 +
>>>  drivers/media/i2c/max2175/Makefile                 |    4 +
>>>  drivers/media/i2c/max2175/max2175.c                | 1558 +++++++++++++++
>>>  drivers/media/i2c/max2175/max2175.h                |  108 ++
>>>  7 files changed, 1745 insertions(+)
>>>  create mode 100644
>>>  Documentation/devicetree/bindings/media/i2c/max2175.txt
>>>  create mode 100644 drivers/media/i2c/max2175/Kconfig
>>>  create mode 100644 drivers/media/i2c/max2175/Makefile
>>>  create mode 100644 drivers/media/i2c/max2175/max2175.c
>>>  create mode 100644 drivers/media/i2c/max2175/max2175.h
>>
>> <snip>
>>
>>> diff --git a/drivers/media/i2c/max2175/max2175.c
>>> b/drivers/media/i2c/max2175/max2175.c new file mode 100644
>>> index 0000000..ec45b52
>>> --- /dev/null
>>> +++ b/drivers/media/i2c/max2175/max2175.c
>>> @@ -0,0 +1,1558 @@
>>
>> <snip>
>>
>>> +/* Read/Write bit(s) on top of regmap */
>>> +static int max2175_read(struct max2175 *ctx, u8 idx, u8 *val)
>>> +{
>>> +	u32 regval;
>>> +	int ret = regmap_read(ctx->regmap, idx, &regval);
>>> +
>>> +	if (ret)
>>> +		v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);
> 
> By the way, I think I've seen a proposal to get rid of v4l2_err() in favour of 
> dev_err(), was I dreaming or should this patch use dev_err() already ?

I haven't seen anything, but I may have missed it. I haven't been on top of the
mailinglist lately. I'm fine with both.

> 
>>> +
>>> +	*val = regval;
>>
>> Does regmap_read initialize regval even if it returns an error? If not,
>> then I would initialize regval to 0 to prevent *val being uninitialized.
> 
> Better than that the error should be propagated to the caller and handled.
> 
>>> +	return ret;
>>> +}
> 
> [snip]
> 
>>> +static int max2175_band_from_freq(u32 freq)
>>> +{
>>> +	if (freq >= 144000 && freq <= 26100000)
>>> +		return MAX2175_BAND_AM;
>>> +	else if (freq >= 65000000 && freq <= 108000000)
>>> +		return MAX2175_BAND_FM;
>>> +	else
>>
>> No need for these 'else' keywords.
> 
> Indeed by in my opinion they improve readability :-)
> 
>>> +		return MAX2175_BAND_VHF;
>>> +}
> 
> [snip]
> 
>>> +static const struct v4l2_ctrl_config max2175_na_rx_mode = {
>>> +	.ops = &max2175_ctrl_ops,
>>> +	.id = V4L2_CID_MAX2175_RX_MODE,
>>> +	.name = "RX MODE",
>>> +	.type = V4L2_CTRL_TYPE_MENU,
>>> +	.max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
>>> +	.def = 0,
>>> +	.qmenu = max2175_ctrl_na_rx_modes,
>>> +};
>>
>> Please document all these controls better. This is part of the public API,
>> so you need to give more information what this means exactly.
> 
> Should that go to Documentation/media/v4l-drivers/ ? If so "[PATCH v4 3/4] 
> v4l: Add Renesas R-Car FDP1 Driver" can be used as an example.

I think that's the preferred place going forward. But a comment should be
added here pointing to that file so there is a better chance of keeping
the doc and code in sync.

> 
> [snip]
> 

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ramesh Shanmugasundaram Nov. 14, 2016, 3:54 p.m. UTC | #6
Hi Hans,

Thank you for the review comments.

> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:

> > This patch adds driver support for MAX2175 chip. This is Maxim

> > Integrated's RF to Bits tuner front end chip designed for

> > software-defined radio solutions. This driver exposes the tuner as a

> > sub-device instance with standard and custom controls to configure the

> device.

> >

> > Signed-off-by: Ramesh Shanmugasundaram

> > <ramesh.shanmugasundaram@bp.renesas.com>

> > ---

> >  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +

> >  drivers/media/i2c/Kconfig                          |    4 +

> >  drivers/media/i2c/Makefile                         |    2 +

> >  drivers/media/i2c/max2175/Kconfig                  |    8 +

> >  drivers/media/i2c/max2175/Makefile                 |    4 +

> >  drivers/media/i2c/max2175/max2175.c                | 1558

> ++++++++++++++++++++

> >  drivers/media/i2c/max2175/max2175.h                |  108 ++

> >  7 files changed, 1745 insertions(+)

> >  create mode 100644

> > Documentation/devicetree/bindings/media/i2c/max2175.txt

> >  create mode 100644 drivers/media/i2c/max2175/Kconfig  create mode

> > 100644 drivers/media/i2c/max2175/Makefile

> >  create mode 100644 drivers/media/i2c/max2175/max2175.c

> >  create mode 100644 drivers/media/i2c/max2175/max2175.h

> >

> 

> <snip>

> 

> > diff --git a/drivers/media/i2c/max2175/max2175.c

> > b/drivers/media/i2c/max2175/max2175.c

> > new file mode 100644

> > index 0000000..ec45b52

> > --- /dev/null

> > +++ b/drivers/media/i2c/max2175/max2175.c

> > @@ -0,0 +1,1558 @@

> 

> <snip>

> 

> > +/* Read/Write bit(s) on top of regmap */ static int

> > +max2175_read(struct max2175 *ctx, u8 idx, u8 *val) {

> > +	u32 regval;

> > +	int ret = regmap_read(ctx->regmap, idx, &regval);

> > +

> > +	if (ret)

> > +		v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);

> > +

> > +	*val = regval;

> 

> Does regmap_read initialize regval even if it returns an error? If not,

> then I would initialize regval to 0 to prevent *val being uninitialized.


Agreed.

> 

> > +	return ret;

> > +}

> > +

> > +static int max2175_write(struct max2175 *ctx, u8 idx, u8 val) {

> > +	int ret = regmap_write(ctx->regmap, idx, val);

> > +

> > +	if (ret)

> > +		v4l2_err(ctx->client, "write ret(%d): idx 0x%02x val

> 0x%02x\n",

> > +			 ret, idx, val);

> > +	return ret;

> > +}

> > +

> > +static u8 max2175_read_bits(struct max2175 *ctx, u8 idx, u8 msb, u8

> > +lsb) {

> > +	u8 val;

> > +

> > +	if (max2175_read(ctx, idx, &val))

> > +		return 0;

> > +

> > +	return max2175_get_bitval(val, msb, lsb); }

> > +

> > +static bool max2175_read_bit(struct max2175 *ctx, u8 idx, u8 bit) {

> > +	return !!max2175_read_bits(ctx, idx, bit, bit); }

> > +

> > +static int max2175_write_bits(struct max2175 *ctx, u8 idx,

> > +			     u8 msb, u8 lsb, u8 newval)

> > +{

> > +	int ret = regmap_update_bits(ctx->regmap, idx, GENMASK(msb, lsb),

> > +				     newval << lsb);

> > +

> > +	if (ret)

> > +		v4l2_err(ctx->client, "wbits ret(%d): idx 0x%02x\n", ret,

> idx);

> > +

> > +	return ret;

> > +}

> > +

> > +static int max2175_write_bit(struct max2175 *ctx, u8 idx, u8 bit, u8

> > +newval) {

> > +	return max2175_write_bits(ctx, idx, bit, bit, newval); }

> > +

> > +/* Checks expected pattern every msec until timeout */ static int

> > +max2175_poll_timeout(struct max2175 *ctx, u8 idx, u8 msb, u8 lsb,

> > +				u8 exp_bitval, u32 timeout_ms)

> > +{

> > +	unsigned int val;

> > +

> > +	return regmap_read_poll_timeout(ctx->regmap, idx, val,

> > +			(max2175_get_bitval(val, msb, lsb) == exp_bitval),

> > +			1000, timeout_ms * 1000);

> > +}

> > +

> > +static int max2175_poll_csm_ready(struct max2175 *ctx) {

> > +	int ret;

> > +

> > +	ret = max2175_poll_timeout(ctx, 69, 1, 1, 0, 50);

> > +	if (ret)

> > +		v4l2_err(ctx->client, "csm not ready\n");

> > +

> > +	return ret;

> > +}

> > +

> > +#define MAX2175_IS_BAND_AM(ctx)		\

> > +	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_AM)

> > +

> > +#define MAX2175_IS_BAND_VHF(ctx)	\

> > +	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_VHF)

> > +

> > +#define MAX2175_IS_FM_MODE(ctx)		\

> > +	(max2175_read_bits(ctx, 12, 5, 4) == 0)

> > +

> > +#define MAX2175_IS_FMHD_MODE(ctx)	\

> > +	(max2175_read_bits(ctx, 12, 5, 4) == 1)

> > +

> > +#define MAX2175_IS_DAB_MODE(ctx)	\

> > +	(max2175_read_bits(ctx, 12, 5, 4) == 2)

> > +

> > +static int max2175_band_from_freq(u32 freq) {

> > +	if (freq >= 144000 && freq <= 26100000)

> > +		return MAX2175_BAND_AM;

> > +	else if (freq >= 65000000 && freq <= 108000000)

> > +		return MAX2175_BAND_FM;

> > +	else

> 

> No need for these 'else' keywords.


Agreed.

> 

> > +		return MAX2175_BAND_VHF;

> > +}

> > +

> > +static int max2175_update_i2s_mode(struct max2175 *ctx, u32 rx_mode,

> > +				   u32 i2s_mode)

> > +{

> > +	max2175_write_bits(ctx, 29, 2, 0, i2s_mode);

> > +

> > +	/* Based on I2S mode value I2S_WORD_CNT values change */

> > +	switch (i2s_mode) {

> > +	case MAX2175_I2S_MODE3:

> > +		max2175_write_bits(ctx, 30, 6, 0, 1);

> > +		break;

> > +	case MAX2175_I2S_MODE2:

> > +	case MAX2175_I2S_MODE4:

> > +		max2175_write_bits(ctx, 30, 6, 0, 0);

> > +		break;

> > +	case MAX2175_I2S_MODE0:

> > +		max2175_write_bits(ctx, 30, 6, 0,

> > +			ctx->rx_modes[rx_mode].i2s_word_size);

> > +		break;

> > +	}

> > +	mxm_dbg(ctx, "update_i2s_mode %u, rx_mode %u\n", i2s_mode, rx_mode);

> > +	return 0;

> > +}


[snip]

> > +

> > +static int max2175_enum_freq_bands(struct v4l2_subdev *sd,

> > +			    struct v4l2_frequency_band *band) {

> > +	struct max2175 *ctx = max2175_from_sd(sd);

> > +

> > +	if (band->tuner == 0 && band->index == 0)

> > +		*band = *ctx->bands_rf;

> > +	else

> > +		return -EINVAL;

> 

> This is a bit ugly. I would invert the condition and return -EINVAL.

> Then assign *band and return 0.


Agreed.

> 

> > +

> > +	return 0;

> > +}

> > +

> > +static int max2175_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner

> > +*vt) {

> > +	struct max2175 *ctx = max2175_from_sd(sd);

> > +

> > +	if (vt->index > 0)

> > +		return -EINVAL;

> > +

> > +	strlcpy(vt->name, "RF", sizeof(vt->name));

> > +	vt->type = V4L2_TUNER_RF;

> > +	vt->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;

> > +	vt->rangelow = ctx->bands_rf->rangelow;

> > +	vt->rangehigh = ctx->bands_rf->rangehigh;

> > +	return 0;

> > +}

> > +

> > +static int max2175_s_tuner(struct v4l2_subdev *sd, const struct

> > +v4l2_tuner *vt) {

> > +	/* Check tuner index is valid */

> > +	if (vt->index > 0)

> > +		return -EINVAL;

> > +

> > +	return 0;

> > +}

> > +

> > +static const struct v4l2_subdev_tuner_ops max2175_tuner_ops = {

> > +	.s_frequency = max2175_s_frequency,

> > +	.g_frequency = max2175_g_frequency,

> > +	.enum_freq_bands = max2175_enum_freq_bands,

> > +	.g_tuner = max2175_g_tuner,

> > +	.s_tuner = max2175_s_tuner,

> > +};

> > +

> > +static const struct v4l2_subdev_ops max2175_ops = {

> > +	.tuner = &max2175_tuner_ops,

> > +};

> > +

> > +static const struct v4l2_ctrl_ops max2175_ctrl_ops = {

> > +	.s_ctrl = max2175_s_ctrl,

> > +	.g_volatile_ctrl = max2175_g_volatile_ctrl, };

> > +

> > +static const struct v4l2_ctrl_config max2175_i2s_en = {

> > +	.ops = &max2175_ctrl_ops,

> > +	.id = V4L2_CID_MAX2175_I2S_ENABLE,

> > +	.name = "I2S Enable",

> > +	.type = V4L2_CTRL_TYPE_BOOLEAN,

> > +	.min = 0,

> > +	.max = 1,

> > +	.step = 1,

> > +	.def = 1,

> > +};

> > +

> > +static const char * const max2175_ctrl_i2s_modes[] = {

> > +	[MAX2175_I2S_MODE0]	= "i2s mode 0",

> > +	[MAX2175_I2S_MODE1]	= "i2s mode 1 (skipped)",

> > +	[MAX2175_I2S_MODE2]	= "i2s mode 2",

> > +	[MAX2175_I2S_MODE3]	= "i2s mode 3",

> > +	[MAX2175_I2S_MODE4]	= "i2s mode 4",

> > +};

> > +

> > +static const struct v4l2_ctrl_config max2175_i2s_mode = {

> > +	.ops = &max2175_ctrl_ops,

> > +	.id = V4L2_CID_MAX2175_I2S_MODE,

> > +	.name = "I2S MODE value",

> > +	.type = V4L2_CTRL_TYPE_MENU,

> > +	.max = ARRAY_SIZE(max2175_ctrl_i2s_modes) - 1,

> > +	.def = 0,

> > +	.menu_skip_mask = 0x02,

> > +	.qmenu = max2175_ctrl_i2s_modes,

> > +};

> 

> Is this something that is changed dynamically? It looks more like a device

> tree thing (it's not clear what it does, so obviously I can't be sure).


Yes. It can be changed dynamically. 

> 

> > +

> > +static const struct v4l2_ctrl_config max2175_hsls = {

> > +	.ops = &max2175_ctrl_ops,

> > +	.id = V4L2_CID_MAX2175_HSLS,

> > +	.name = "HSLS above/below desired",

> > +	.type = V4L2_CTRL_TYPE_INTEGER,

> > +	.min = 0,

> > +	.max = 1,

> > +	.step = 1,

> > +	.def = 1,

> > +};

> > +

> > +static const char * const max2175_ctrl_eu_rx_modes[] = {

> > +	[MAX2175_EU_FM_1_2]	= "EU FM 1.2",

> > +	[MAX2175_DAB_1_2]	= "DAB 1.2",

> > +};

> > +

> > +static const char * const max2175_ctrl_na_rx_modes[] = {

> > +	[MAX2175_NA_FM_1_0]	= "NA FM 1.0",

> > +	[MAX2175_NA_FM_2_0]	= "NA FM 2.0",

> > +};

> > +

> > +static const struct v4l2_ctrl_config max2175_eu_rx_mode = {

> > +	.ops = &max2175_ctrl_ops,

> > +	.id = V4L2_CID_MAX2175_RX_MODE,

> > +	.name = "RX MODE",

> > +	.type = V4L2_CTRL_TYPE_MENU,

> > +	.max = ARRAY_SIZE(max2175_ctrl_eu_rx_modes) - 1,

> > +	.def = 0,

> > +	.qmenu = max2175_ctrl_eu_rx_modes,

> > +};

> > +

> > +static const struct v4l2_ctrl_config max2175_na_rx_mode = {

> > +	.ops = &max2175_ctrl_ops,

> > +	.id = V4L2_CID_MAX2175_RX_MODE,

> > +	.name = "RX MODE",

> > +	.type = V4L2_CTRL_TYPE_MENU,

> > +	.max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,

> > +	.def = 0,

> > +	.qmenu = max2175_ctrl_na_rx_modes,

> > +};

> 

> Please document all these controls better. This is part of the public API,

> so you need to give more information what this means exactly.


Thanks. Now, I have added a one-liner and a bit descriptive explanation at Documentation/media/v4l-drivers dir as you & Laurent concluded.

Thanks,
Ramesh
Rob Herring Nov. 14, 2016, 7:41 p.m. UTC | #7
On Wed, Nov 09, 2016 at 03:44:41PM +0000, Ramesh Shanmugasundaram wrote:
> This patch adds driver support for MAX2175 chip. This is Maxim
> Integrated's RF to Bits tuner front end chip designed for software-defined
> radio solutions. This driver exposes the tuner as a sub-device instance
> with standard and custom controls to configure the device.
> 
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
> ---
>  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +

It's preferred that bindings are a separate patch.

>  drivers/media/i2c/Kconfig                          |    4 +
>  drivers/media/i2c/Makefile                         |    2 +
>  drivers/media/i2c/max2175/Kconfig                  |    8 +
>  drivers/media/i2c/max2175/Makefile                 |    4 +
>  drivers/media/i2c/max2175/max2175.c                | 1558 ++++++++++++++++++++
>  drivers/media/i2c/max2175/max2175.h                |  108 ++
>  7 files changed, 1745 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/max2175.txt
>  create mode 100644 drivers/media/i2c/max2175/Kconfig
>  create mode 100644 drivers/media/i2c/max2175/Makefile
>  create mode 100644 drivers/media/i2c/max2175/max2175.c
>  create mode 100644 drivers/media/i2c/max2175/max2175.h
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/max2175.txt
> new file mode 100644
> index 0000000..69f0dad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/max2175.txt
> @@ -0,0 +1,61 @@
> +Maxim Integrated MAX2175 RF to Bits tuner
> +-----------------------------------------
> +
> +The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with
> +RF to Bits® front-end designed for software-defined radio solutions.
> +
> +Required properties:
> +--------------------
> +- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
> +- clocks: phandle to the fixed xtal clock.
> +- clock-names: name of the fixed xtal clock.
> +- port: child port node of a tuner that defines the local and remote
> +  endpoints. The remote endpoint is assumed to be an SDR device
> +  that is capable of receiving the digital samples from the tuner.
> +
> +Optional properties:
> +--------------------
> +- maxim,slave	      : empty property indicates this is a slave of
> +			another master tuner. This is used to define two
> +			tuners in diversity mode (1 master, 1 slave). By
> +			default each tuner is an individual master.
> +- maxim,refout-load-pF: load capacitance value (in pF) on reference

Please add 'pF' to property-units.txt.

> +			output drive level. The possible load values are
> +			 0pF (default - refout disabled)
> +			10pF
> +			20pF
> +			30pF
> +			40pF
> +			60pF
> +			70pF
> +- maxim,am-hiz	      : empty property indicates AM Hi-Z filter path is
> +			selected for AM antenna input. By default this
> +			filter path is not used.
> +
> +Example:
> +--------
> +
> +Board specific DTS file
> +
> +/* Fixed XTAL clock node */
> +maxim_xtal: maximextal {

clock {

> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <36864000>;
> +};
> +
> +/* A tuner device instance under i2c bus */
> +max2175_0: tuner@60 {
> +	compatible = "maxim,max2175";
> +	reg = <0x60>;
> +	clocks = <&maxim_xtal>;
> +	clock-names = "xtal";
> +	maxim,refout-load-pF = <10>;
> +
> +	port {
> +		max2175_0_ep: endpoint {
> +			remote-endpoint = <&slave_rx_v4l2_sdr_device>;

'v4l2' is not something that should appear in a DT.

> +		};
> +	};
> +
> +};
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ramesh Shanmugasundaram Nov. 17, 2016, 12:41 p.m. UTC | #8
Hi Rob,

Thanks for the review comments.

> On Wed, Nov 09, 2016 at 03:44:41PM +0000, Ramesh Shanmugasundaram wrote:
> > This patch adds driver support for MAX2175 chip. This is Maxim
> > Integrated's RF to Bits tuner front end chip designed for
> > software-defined radio solutions. This driver exposes the tuner as a
> > sub-device instance with standard and custom controls to configure the
> device.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > <ramesh.shanmugasundaram@bp.renesas.com>
> > ---
> >  .../devicetree/bindings/media/i2c/max2175.txt      |   61 +
> 
> It's preferred that bindings are a separate patch.

OK. I will do the same for the other driver.

> 
> >  drivers/media/i2c/Kconfig                          |    4 +
> >  drivers/media/i2c/Makefile                         |    2 +
> >  drivers/media/i2c/max2175/Kconfig                  |    8 +
> >  drivers/media/i2c/max2175/Makefile                 |    4 +
> >  drivers/media/i2c/max2175/max2175.c                | 1558
> ++++++++++++++++++++
> >  drivers/media/i2c/max2175/max2175.h                |  108 ++
> >  7 files changed, 1745 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/i2c/max2175.txt
> >  create mode 100644 drivers/media/i2c/max2175/Kconfig  create mode
> > 100644 drivers/media/i2c/max2175/Makefile
> >  create mode 100644 drivers/media/i2c/max2175/max2175.c
> >  create mode 100644 drivers/media/i2c/max2175/max2175.h
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt
> > b/Documentation/devicetree/bindings/media/i2c/max2175.txt
> > new file mode 100644
> > index 0000000..69f0dad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/max2175.txt
> > @@ -0,0 +1,61 @@
> > +Maxim Integrated MAX2175 RF to Bits tuner
> > +-----------------------------------------
> > +
> > +The MAX2175 IC is an advanced analog/digital hybrid-radio receiver
> > +with RF to Bits(r) front-end designed for software-defined radio
> solutions.
> > +
> > +Required properties:
> > +--------------------
> > +- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
> > +- clocks: phandle to the fixed xtal clock.
> > +- clock-names: name of the fixed xtal clock.
> > +- port: child port node of a tuner that defines the local and remote
> > +  endpoints. The remote endpoint is assumed to be an SDR device
> > +  that is capable of receiving the digital samples from the tuner.
> > +
> > +Optional properties:
> > +--------------------
> > +- maxim,slave	      : empty property indicates this is a slave of
> > +			another master tuner. This is used to define two
> > +			tuners in diversity mode (1 master, 1 slave). By
> > +			default each tuner is an individual master.
> > +- maxim,refout-load-pF: load capacitance value (in pF) on reference
> 
> Please add 'pF' to property-units.txt.

Agreed.

> 
> > +			output drive level. The possible load values are
> > +			 0pF (default - refout disabled)
> > +			10pF
> > +			20pF
> > +			30pF
> > +			40pF
> > +			60pF
> > +			70pF
> > +- maxim,am-hiz	      : empty property indicates AM Hi-Z filter path is
> > +			selected for AM antenna input. By default this
> > +			filter path is not used.
> > +
> > +Example:
> > +--------
> > +
> > +Board specific DTS file
> > +
> > +/* Fixed XTAL clock node */
> > +maxim_xtal: maximextal {
> 
> clock {

Agreed.

> 
> > +	compatible = "fixed-clock";
> > +	#clock-cells = <0>;
> > +	clock-frequency = <36864000>;
> > +};
> > +
> > +/* A tuner device instance under i2c bus */
> > +max2175_0: tuner@60 {
> > +	compatible = "maxim,max2175";
> > +	reg = <0x60>;
> > +	clocks = <&maxim_xtal>;
> > +	clock-names = "xtal";
> > +	maxim,refout-load-pF = <10>;
> > +
> > +	port {
> > +		max2175_0_ep: endpoint {
> > +			remote-endpoint = <&slave_rx_v4l2_sdr_device>;
> 
> 'v4l2' is not something that should appear in a DT.

OK. I'll leave it as "slave_rx_device".

Thanks,
Ramesh
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/max2175.txt
new file mode 100644
index 0000000..69f0dad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/max2175.txt
@@ -0,0 +1,61 @@ 
+Maxim Integrated MAX2175 RF to Bits tuner
+-----------------------------------------
+
+The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with
+RF to Bits® front-end designed for software-defined radio solutions.
+
+Required properties:
+--------------------
+- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
+- clocks: phandle to the fixed xtal clock.
+- clock-names: name of the fixed xtal clock.
+- port: child port node of a tuner that defines the local and remote
+  endpoints. The remote endpoint is assumed to be an SDR device
+  that is capable of receiving the digital samples from the tuner.
+
+Optional properties:
+--------------------
+- maxim,slave	      : empty property indicates this is a slave of
+			another master tuner. This is used to define two
+			tuners in diversity mode (1 master, 1 slave). By
+			default each tuner is an individual master.
+- maxim,refout-load-pF: load capacitance value (in pF) on reference
+			output drive level. The possible load values are
+			 0pF (default - refout disabled)
+			10pF
+			20pF
+			30pF
+			40pF
+			60pF
+			70pF
+- maxim,am-hiz	      : empty property indicates AM Hi-Z filter path is
+			selected for AM antenna input. By default this
+			filter path is not used.
+
+Example:
+--------
+
+Board specific DTS file
+
+/* Fixed XTAL clock node */
+maxim_xtal: maximextal {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <36864000>;
+};
+
+/* A tuner device instance under i2c bus */
+max2175_0: tuner@60 {
+	compatible = "maxim,max2175";
+	reg = <0x60>;
+	clocks = <&maxim_xtal>;
+	clock-names = "xtal";
+	maxim,refout-load-pF = <10>;
+
+	port {
+		max2175_0_ep: endpoint {
+			remote-endpoint = <&slave_rx_v4l2_sdr_device>;
+		};
+	};
+
+};
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 2669b4b..66c73b0 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -749,6 +749,10 @@  config VIDEO_SAA6752HS
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa6752hs.
 
+comment "SDR tuner chips"
+
+source "drivers/media/i2c/max2175/Kconfig"
+
 comment "Miscellaneous helper chips"
 
 config VIDEO_THS7303
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 92773b2..cfae721 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -6,6 +6,8 @@  obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-y				+= soc_camera/
 
+obj-$(CONFIG_SDR_MAX2175) 	+= max2175/
+
 obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
diff --git a/drivers/media/i2c/max2175/Kconfig b/drivers/media/i2c/max2175/Kconfig
new file mode 100644
index 0000000..93a8f83
--- /dev/null
+++ b/drivers/media/i2c/max2175/Kconfig
@@ -0,0 +1,8 @@ 
+config SDR_MAX2175
+	tristate "Maxim 2175 RF to Bits tuner"
+	depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
+	---help---
+	  Support for Maxim 2175 tuner
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called max2175.
diff --git a/drivers/media/i2c/max2175/Makefile b/drivers/media/i2c/max2175/Makefile
new file mode 100644
index 0000000..9bb46ac
--- /dev/null
+++ b/drivers/media/i2c/max2175/Makefile
@@ -0,0 +1,4 @@ 
+#
+# Makefile for Maxim RF to Bits tuner device
+#
+obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/max2175/max2175.c b/drivers/media/i2c/max2175/max2175.c
new file mode 100644
index 0000000..ec45b52
--- /dev/null
+++ b/drivers/media/i2c/max2175/max2175.c
@@ -0,0 +1,1558 @@ 
+/*
+ * Maxim Integrated MAX2175 RF to Bits tuner driver
+ *
+ * This driver & most of the hard coded values are based on the reference
+ * application delivered by Maxim for this chip.
+ *
+ * Copyright (C) 2016 Maxim Integrated Products
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-of.h>
+
+#include "max2175.h"
+
+#define DRIVER_NAME "max2175"
+
+static unsigned int debug;
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "activate debug info");
+
+#define mxm_dbg(ctx, fmt, arg...) v4l2_dbg(1, debug, &ctx->sd, fmt, ## arg)
+
+/* Rx mode */
+struct max2175_rxmode {
+	enum max2175_band band;		/* Associated band */
+	u32 freq;			/* Default freq in Hz */
+	u8 i2s_word_size;		/* Bit value */
+	u8 i2s_modes[4];		/* Supported modes */
+};
+
+/* Register map to define preset values */
+struct max2175_reg_map {
+	u8 idx;				/* Register index */
+	u8 val;				/* Register value */
+};
+
+static const struct max2175_rxmode eu_rx_modes[] = {
+	/* EU modes */
+	[MAX2175_EU_FM_1_2] = { MAX2175_BAND_FM,
+				98256000, 1, { 0, 0, 0, 0 } },
+	[MAX2175_DAB_1_2]   = { MAX2175_BAND_VHF,
+				182640000, 0, { 0, 0, 0, 0 } },
+};
+
+static const struct max2175_rxmode na_rx_modes[] = {
+	/* NA modes */
+	[MAX2175_NA_FM_1_0] = { MAX2175_BAND_FM,
+				98255520, 1, { 0, 0, 0, 0 } },
+	[MAX2175_NA_FM_2_0] = { MAX2175_BAND_FM,
+				98255520, 6, { 0, 0, 0, 0 } },
+};
+
+/*
+ * Preset values:
+ * Based on Maxim MAX2175 Register Table revision: 130p10
+ */
+static const u8 full_fm_eu_1p0[] = {
+	0x15, 0x04, 0xb8, 0xe3, 0x35, 0x18, 0x7c, 0x00,
+	0x00, 0x7d, 0x40, 0x08, 0x70, 0x7a, 0x88, 0x91,
+	0x61, 0x61, 0x61, 0x61, 0x5a, 0x0f, 0x34, 0x1c,
+	0x14, 0x88, 0x33, 0x02, 0x00, 0x09, 0x00, 0x65,
+	0x9f, 0x2b, 0x80, 0x00, 0x95, 0x05, 0x2c, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
+	0x4a, 0x08, 0xa8, 0x0e, 0x0e, 0x2f, 0x7e, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xab, 0x5e, 0xa9,
+	0xae, 0xbb, 0x57, 0x18, 0x3b, 0x03, 0x3b, 0x64,
+	0x40, 0x60, 0x00, 0x2a, 0xbf, 0x3f, 0xff, 0x9f,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00,
+	0xff, 0xfc, 0xef, 0x1c, 0x40, 0x00, 0x00, 0x02,
+	0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xac, 0x40, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x00, 0x00,
+	0x00, 0x47, 0x00, 0x00, 0x11, 0x3f, 0x22, 0x00,
+	0xf1, 0x00, 0x41, 0x03, 0xb0, 0x00, 0x00, 0x00,
+	0x1b,
+};
+
+static const u8 full_fm_na_1p0[] = {
+	0x13, 0x08, 0x8d, 0xc0, 0x35, 0x18, 0x7d, 0x3f,
+	0x7d, 0x75, 0x40, 0x08, 0x70, 0x7a, 0x88, 0x91,
+	0x61, 0x61, 0x61, 0x61, 0x5c, 0x0f, 0x34, 0x1c,
+	0x14, 0x88, 0x33, 0x02, 0x00, 0x01, 0x00, 0x65,
+	0x9f, 0x2b, 0x80, 0x00, 0x95, 0x05, 0x2c, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
+	0x4a, 0x08, 0xa8, 0x0e, 0x0e, 0xaf, 0x7e, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xab, 0x5e, 0xa9,
+	0xae, 0xbb, 0x57, 0x18, 0x3b, 0x03, 0x3b, 0x64,
+	0x40, 0x60, 0x00, 0x2a, 0xbf, 0x3f, 0xff, 0x9f,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00,
+	0xff, 0xfc, 0xef, 0x1c, 0x40, 0x00, 0x00, 0x02,
+	0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xa6, 0x40, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x00, 0x00,
+	0x00, 0x35, 0x00, 0x00, 0x11, 0x3f, 0x22, 0x00,
+	0xf1, 0x00, 0x41, 0x03, 0xb0, 0x00, 0x00, 0x00,
+	0x1b,
+};
+
+/* DAB1.2 settings */
+static const struct max2175_reg_map dab12_map[] = {
+	{ 0x01, 0x13 }, { 0x02, 0x0d }, { 0x03, 0x15 }, { 0x04, 0x55 },
+	{ 0x05, 0x0a }, { 0x06, 0xa0 }, { 0x07, 0x40 }, { 0x08, 0x00 },
+	{ 0x09, 0x00 }, { 0x0a, 0x7d }, { 0x0b, 0x4a }, { 0x0c, 0x28 },
+	{ 0x0e, 0x43 }, { 0x0f, 0xb5 }, { 0x10, 0x31 }, { 0x11, 0x9e },
+	{ 0x12, 0x68 }, { 0x13, 0x9e }, { 0x14, 0x68 }, { 0x15, 0x58 },
+	{ 0x16, 0x2f }, { 0x17, 0x3f }, { 0x18, 0x40 }, { 0x1a, 0x88 },
+	{ 0x1b, 0xaa }, { 0x1c, 0x9a }, { 0x1d, 0x00 }, { 0x1e, 0x00 },
+	{ 0x23, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 },
+	{ 0x27, 0x00 }, { 0x32, 0x08 }, { 0x33, 0xf8 }, { 0x36, 0x2d },
+	{ 0x37, 0x7e }, { 0x55, 0xaf }, { 0x56, 0x3f }, { 0x57, 0xf8 },
+	{ 0x58, 0x99 }, { 0x76, 0x00 }, { 0x77, 0x00 }, { 0x78, 0x02 },
+	{ 0x79, 0x40 }, { 0x82, 0x00 }, { 0x83, 0x00 }, { 0x85, 0x00 },
+	{ 0x86, 0x20 },
+};
+
+/* EU FM 1.2 settings */
+static const struct max2175_reg_map fmeu1p2_map[] = {
+	{ 0x01, 0x15 }, { 0x02, 0x04 }, { 0x03, 0xb8 }, { 0x04, 0xe3 },
+	{ 0x05, 0x35 }, { 0x06, 0x18 }, { 0x07, 0x7c }, { 0x08, 0x00 },
+	{ 0x09, 0x00 }, { 0x0a, 0x73 }, { 0x0b, 0x40 }, { 0x0c, 0x08 },
+	{ 0x0e, 0x7a }, { 0x0f, 0x88 }, { 0x10, 0x91 }, { 0x11, 0x61 },
+	{ 0x12, 0x61 }, { 0x13, 0x61 }, { 0x14, 0x61 }, { 0x15, 0x5a },
+	{ 0x16, 0x0f }, { 0x17, 0x34 }, { 0x18, 0x1c }, { 0x1a, 0x88 },
+	{ 0x1b, 0x33 }, { 0x1c, 0x02 }, { 0x1d, 0x00 }, { 0x1e, 0x01 },
+	{ 0x23, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x95 }, { 0x26, 0x05 },
+	{ 0x27, 0x2c }, { 0x32, 0x08 }, { 0x33, 0xa8 }, { 0x36, 0x2f },
+	{ 0x37, 0x7e }, { 0x55, 0xbf }, { 0x56, 0x3f }, { 0x57, 0xff },
+	{ 0x58, 0x9f }, { 0x76, 0xac }, { 0x77, 0x40 }, { 0x78, 0x00 },
+	{ 0x79, 0x00 }, { 0x82, 0x47 }, { 0x83, 0x00 }, { 0x85, 0x11 },
+	{ 0x86, 0x3f },
+};
+
+/* FM NA 1.0 settings */
+static const struct max2175_reg_map fmna1p0_map[] = {
+	{ 0x01, 0x13 }, { 0x02, 0x08 }, { 0x03, 0x8d }, { 0x04, 0xc0 },
+	{ 0x05, 0x35 }, { 0x06, 0x18 }, { 0x07, 0x7d }, { 0x08, 0x3f },
+	{ 0x09, 0x7d }, { 0x0a, 0x75 }, { 0x0b, 0x40 }, { 0x0c, 0x08 },
+	{ 0x0e, 0x7a }, { 0x0f, 0x88 }, { 0x10, 0x91 }, { 0x11, 0x61 },
+	{ 0x12, 0x61 }, { 0x13, 0x61 }, { 0x14, 0x61 }, { 0x15, 0x5c },
+	{ 0x16, 0x0f }, { 0x17, 0x34 }, { 0x18, 0x1c }, { 0x1a, 0x88 },
+	{ 0x1b, 0x33 }, { 0x1c, 0x02 }, { 0x1d, 0x00 }, { 0x1e, 0x01 },
+	{ 0x23, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x95 }, { 0x26, 0x05 },
+	{ 0x27, 0x2c }, { 0x32, 0x08 }, { 0x33, 0xa8 }, { 0x36, 0xaf },
+	{ 0x37, 0x7e }, { 0x55, 0xbf }, { 0x56, 0x3f }, { 0x57, 0xff },
+	{ 0x58, 0x9f }, { 0x76, 0xa6 }, { 0x77, 0x40 }, { 0x78, 0x00 },
+	{ 0x79, 0x00 }, { 0x82, 0x35 }, { 0x83, 0x00 }, { 0x85, 0x11 },
+	{ 0x86, 0x3f },
+};
+
+/* FM NA 2.0 settings */
+static const struct max2175_reg_map fmna2p0_map[] = {
+	{ 0x01, 0x13 }, { 0x02, 0x08 }, { 0x03, 0x8d }, { 0x04, 0xc0 },
+	{ 0x05, 0x35 }, { 0x06, 0x18 }, { 0x07, 0x7c }, { 0x08, 0x54 },
+	{ 0x09, 0xa7 }, { 0x0a, 0x55 }, { 0x0b, 0x42 }, { 0x0c, 0x48 },
+	{ 0x0e, 0x7a }, { 0x0f, 0x88 }, { 0x10, 0x91 }, { 0x11, 0x61 },
+	{ 0x12, 0x61 }, { 0x13, 0x61 }, { 0x14, 0x61 }, { 0x15, 0x5c },
+	{ 0x16, 0x0f }, { 0x17, 0x34 }, { 0x18, 0x1c }, { 0x1a, 0x88 },
+	{ 0x1b, 0x33 }, { 0x1c, 0x02 }, { 0x1d, 0x00 }, { 0x1e, 0x01 },
+	{ 0x23, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x95 }, { 0x26, 0x05 },
+	{ 0x27, 0x2c }, { 0x32, 0x08 }, { 0x33, 0xa8 }, { 0x36, 0xaf },
+	{ 0x37, 0x7e }, { 0x55, 0xbf }, { 0x56, 0x3f }, { 0x57, 0xff },
+	{ 0x58, 0x9f }, { 0x76, 0xac }, { 0x77, 0xc0 }, { 0x78, 0x00 },
+	{ 0x79, 0x00 }, { 0x82, 0x6b }, { 0x83, 0x00 }, { 0x85, 0x11 },
+	{ 0x86, 0x3f },
+};
+
+static const u16 ch_coeff_dab1[] = {
+	0x001c, 0x0007, 0xffcd, 0x0056, 0xffa4, 0x0033, 0x0027, 0xff61,
+	0x010e, 0xfec0, 0x0106, 0xffb8, 0xff1c, 0x023c, 0xfcb2, 0x039b,
+	0xfd4e, 0x0055, 0x036a, 0xf7de, 0x0d21, 0xee72, 0x1499, 0x6a51,
+};
+
+static const u16 ch_coeff_fmeu[] = {
+	0x0000, 0xffff, 0x0001, 0x0002, 0xfffa, 0xffff, 0x0015, 0xffec,
+	0xffde, 0x0054, 0xfff9, 0xff52, 0x00b8, 0x00a2, 0xfe0a, 0x00af,
+	0x02e3, 0xfc14, 0xfe89, 0x089d, 0xfa2e, 0xf30f, 0x25be, 0x4eb6,
+};
+
+static const u16 eq_coeff_fmeu1_ra02_m6db[] = {
+	0x0040, 0xffc6, 0xfffa, 0x002c, 0x000d, 0xff90, 0x0037, 0x006e,
+	0xffc0, 0xff5b, 0x006a, 0x00f0, 0xff57, 0xfe94, 0x0112, 0x0252,
+	0xfe0c, 0xfc6a, 0x0385, 0x0553, 0xfa49, 0xf789, 0x0b91, 0x1a10,
+};
+
+static const u16 ch_coeff_fmna[] = {
+	0x0001, 0x0003, 0xfffe, 0xfff4, 0x0000, 0x001f, 0x000c, 0xffbc,
+	0xffd3, 0x007d, 0x0075, 0xff33, 0xff01, 0x0131, 0x01ef, 0xfe60,
+	0xfc7a, 0x020e, 0x0656, 0xfd94, 0xf395, 0x02ab, 0x2857, 0x3d3f,
+};
+
+static const u16 eq_coeff_fmna1_ra02_m6db[] = {
+	0xfff1, 0xffe1, 0xffef, 0x000e, 0x0030, 0x002f, 0xfff6, 0xffa7,
+	0xff9d, 0x000a, 0x00a2, 0x00b5, 0xffea, 0xfed9, 0xfec5, 0x003d,
+	0x0217, 0x021b, 0xff5a, 0xfc2b, 0xfcbd, 0x02c4, 0x0ac3, 0x0e85,
+};
+
+static const u8 adc_presets[2][23] = {
+	{
+		0x83, 0x00, 0xcf, 0xb4, 0x0f, 0x2c, 0x0c, 0x49,
+		0x00, 0x00, 0x00, 0x8c,	0x02, 0x02, 0x00, 0x04,
+		0xec, 0x82, 0x4b, 0xcc, 0x01, 0x88, 0x0c,
+	},
+	{
+		0x83, 0x00, 0xcf, 0xb4,	0x0f, 0x2c, 0x0c, 0x49,
+		0x00, 0x00, 0x00, 0x8c,	0x02, 0x20, 0x33, 0x8c,
+		0x57, 0xd7, 0x59, 0xb7,	0x65, 0x0e, 0x0c,
+	},
+};
+
+/* Custom controls */
+#define V4L2_CID_MAX2175_I2S_ENABLE	(V4L2_CID_USER_MAX217X_BASE + 0x01)
+#define V4L2_CID_MAX2175_I2S_MODE	(V4L2_CID_USER_MAX217X_BASE + 0x02)
+#define V4L2_CID_MAX2175_HSLS		(V4L2_CID_USER_MAX217X_BASE + 0x03)
+#define V4L2_CID_MAX2175_RX_MODE	(V4L2_CID_USER_MAX217X_BASE + 0x04)
+
+/* Tuner bands */
+static const struct v4l2_frequency_band eu_bands_rf = {
+	.tuner = 0,
+	.type = V4L2_TUNER_RF,
+	.index = 0,
+	.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+	.rangelow   = 65000000,
+	.rangehigh  = 240000000,
+};
+
+static const struct v4l2_frequency_band na_bands_rf = {
+	.tuner = 0,
+	.type = V4L2_TUNER_RF,
+	.index = 0,
+	.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
+	.rangelow   = 65000000,
+	.rangehigh  = 108000000,
+};
+
+/* Regmap settings */
+static const struct regmap_range max2175_regmap_volatile_range[] = {
+	regmap_reg_range(0x30, 0x35),
+	regmap_reg_range(0x3a, 0x45),
+	regmap_reg_range(0x59, 0x5e),
+	regmap_reg_range(0x73, 0x75),
+};
+
+static const struct regmap_access_table max2175_volatile_regs = {
+	.yes_ranges = max2175_regmap_volatile_range,
+	.n_yes_ranges = ARRAY_SIZE(max2175_regmap_volatile_range),
+};
+
+static const struct reg_default max2175_reg_defaults[] = {
+	{ 0x00, 0x07},
+};
+
+static const struct regmap_config max2175_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xff,
+	.reg_defaults = max2175_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(max2175_reg_defaults),
+	.volatile_table = &max2175_volatile_regs,
+	.cache_type = REGCACHE_FLAT,
+};
+
+struct max2175 {
+	struct v4l2_subdev sd;		/* Sub-device */
+	struct i2c_client *client;	/* I2C client */
+
+	/* Controls */
+	struct v4l2_ctrl_handler ctrl_hdl;
+	struct v4l2_ctrl *lna_gain;	/* LNA gain value */
+	struct v4l2_ctrl *if_gain;	/* I/F gain value */
+	struct v4l2_ctrl *pll_lock;	/* PLL lock */
+	struct v4l2_ctrl *i2s_en;	/* I2S output enable */
+	struct v4l2_ctrl *i2s_mode;	/* I2S mode value */
+	struct v4l2_ctrl *hsls;		/* High-side/Low-side polarity */
+	struct v4l2_ctrl *rx_mode;	/* Receive mode */
+
+	/* Regmap */
+	struct regmap *regmap;
+
+	/* Cached configuration */
+	u32 freq;			/* Tuned freq In Hz */
+	const struct max2175_rxmode *rx_modes;		/* EU or NA modes */
+	const struct v4l2_frequency_band *bands_rf;	/* EU or NA bands */
+
+	/* Device settings */
+	unsigned long xtal_freq;	/* Ref Oscillator freq in Hz */
+	u32 decim_ratio;
+	bool master;			/* Master/Slave */
+	bool am_hiz;			/* AM Hi-Z filter usage */
+
+	/* ROM values */
+	u8 rom_bbf_bw_am;
+	u8 rom_bbf_bw_fm;
+	u8 rom_bbf_bw_dab;
+
+	/* Local copy of old setting */
+	u8 i2s_test;
+
+	/* Driver private variables */
+	bool mode_resolved;		/* Flag to sanity check settings */
+};
+
+static inline struct max2175 *max2175_from_sd(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct max2175, sd);
+}
+
+static inline struct max2175 *max2175_from_ctrl_hdl(struct v4l2_ctrl_handler *h)
+{
+	return container_of(h, struct max2175, ctrl_hdl);
+}
+
+/* Get bitval of a given val */
+static inline u8 max2175_get_bitval(u8 val, u8 msb, u8 lsb)
+{
+	return (val & GENMASK(msb, lsb)) >> lsb;
+}
+
+/* Read/Write bit(s) on top of regmap */
+static int max2175_read(struct max2175 *ctx, u8 idx, u8 *val)
+{
+	u32 regval;
+	int ret = regmap_read(ctx->regmap, idx, &regval);
+
+	if (ret)
+		v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);
+
+	*val = regval;
+	return ret;
+}
+
+static int max2175_write(struct max2175 *ctx, u8 idx, u8 val)
+{
+	int ret = regmap_write(ctx->regmap, idx, val);
+
+	if (ret)
+		v4l2_err(ctx->client, "write ret(%d): idx 0x%02x val 0x%02x\n",
+			 ret, idx, val);
+	return ret;
+}
+
+static u8 max2175_read_bits(struct max2175 *ctx, u8 idx, u8 msb, u8 lsb)
+{
+	u8 val;
+
+	if (max2175_read(ctx, idx, &val))
+		return 0;
+
+	return max2175_get_bitval(val, msb, lsb);
+}
+
+static bool max2175_read_bit(struct max2175 *ctx, u8 idx, u8 bit)
+{
+	return !!max2175_read_bits(ctx, idx, bit, bit);
+}
+
+static int max2175_write_bits(struct max2175 *ctx, u8 idx,
+			     u8 msb, u8 lsb, u8 newval)
+{
+	int ret = regmap_update_bits(ctx->regmap, idx, GENMASK(msb, lsb),
+				     newval << lsb);
+
+	if (ret)
+		v4l2_err(ctx->client, "wbits ret(%d): idx 0x%02x\n", ret, idx);
+
+	return ret;
+}
+
+static int max2175_write_bit(struct max2175 *ctx, u8 idx, u8 bit, u8 newval)
+{
+	return max2175_write_bits(ctx, idx, bit, bit, newval);
+}
+
+/* Checks expected pattern every msec until timeout */
+static int max2175_poll_timeout(struct max2175 *ctx, u8 idx, u8 msb, u8 lsb,
+				u8 exp_bitval, u32 timeout_ms)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(ctx->regmap, idx, val,
+			(max2175_get_bitval(val, msb, lsb) == exp_bitval),
+			1000, timeout_ms * 1000);
+}
+
+static int max2175_poll_csm_ready(struct max2175 *ctx)
+{
+	int ret;
+
+	ret = max2175_poll_timeout(ctx, 69, 1, 1, 0, 50);
+	if (ret)
+		v4l2_err(ctx->client, "csm not ready\n");
+
+	return ret;
+}
+
+#define MAX2175_IS_BAND_AM(ctx)		\
+	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_AM)
+
+#define MAX2175_IS_BAND_VHF(ctx)	\
+	(max2175_read_bits(ctx, 5, 1, 0) == MAX2175_BAND_VHF)
+
+#define MAX2175_IS_FM_MODE(ctx)		\
+	(max2175_read_bits(ctx, 12, 5, 4) == 0)
+
+#define MAX2175_IS_FMHD_MODE(ctx)	\
+	(max2175_read_bits(ctx, 12, 5, 4) == 1)
+
+#define MAX2175_IS_DAB_MODE(ctx)	\
+	(max2175_read_bits(ctx, 12, 5, 4) == 2)
+
+static int max2175_band_from_freq(u32 freq)
+{
+	if (freq >= 144000 && freq <= 26100000)
+		return MAX2175_BAND_AM;
+	else if (freq >= 65000000 && freq <= 108000000)
+		return MAX2175_BAND_FM;
+	else
+		return MAX2175_BAND_VHF;
+}
+
+static int max2175_update_i2s_mode(struct max2175 *ctx, u32 rx_mode,
+				   u32 i2s_mode)
+{
+	max2175_write_bits(ctx, 29, 2, 0, i2s_mode);
+
+	/* Based on I2S mode value I2S_WORD_CNT values change */
+	switch (i2s_mode) {
+	case MAX2175_I2S_MODE3:
+		max2175_write_bits(ctx, 30, 6, 0, 1);
+		break;
+	case MAX2175_I2S_MODE2:
+	case MAX2175_I2S_MODE4:
+		max2175_write_bits(ctx, 30, 6, 0, 0);
+		break;
+	case MAX2175_I2S_MODE0:
+		max2175_write_bits(ctx, 30, 6, 0,
+			ctx->rx_modes[rx_mode].i2s_word_size);
+		break;
+	}
+	mxm_dbg(ctx, "update_i2s_mode %u, rx_mode %u\n", i2s_mode, rx_mode);
+	return 0;
+}
+
+static void max2175_i2s_enable(struct max2175 *ctx, bool enable)
+{
+	if (enable) {
+		/* Use old setting */
+		max2175_write_bits(ctx, 104, 3, 0, ctx->i2s_test);
+	} else {
+		/* Cache old setting */
+		ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
+		max2175_write_bits(ctx, 104, 3, 0, 9);	/* Keep SCK alive */
+	}
+	mxm_dbg(ctx, "i2s %sabled: old val %u\n", enable ? "en" : "dis",
+		ctx->i2s_test);
+}
+
+static void max2175_set_filter_coeffs(struct max2175 *ctx, u8 m_sel,
+				      u8 bank, const u16 *coeffs)
+{
+	unsigned int i;
+	u8 coeff_addr, upper_address = 24;
+
+	mxm_dbg(ctx, "set_filter_coeffs: m_sel %d bank %d\n", m_sel, bank);
+	max2175_write_bits(ctx, 114, 5, 4, m_sel);
+
+	if (m_sel == 2)
+		upper_address = 12;
+
+	for (i = 0; i < upper_address; i++) {
+		coeff_addr = i + bank * 24;
+		max2175_write(ctx, 115, coeffs[i] >> 8);
+		max2175_write(ctx, 116, coeffs[i]);
+		max2175_write(ctx, 117, coeff_addr | 1 << 7);
+	}
+	max2175_write_bit(ctx, 117, 7, 0);
+}
+
+static void max2175_load_fmeu_1p2(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(fmeu1p2_map); i++)
+		max2175_write(ctx, fmeu1p2_map[i].idx, fmeu1p2_map[i].val);
+
+	ctx->decim_ratio = 36;
+
+	/* Load the Channel Filter Coefficients into channel filter bank #2 */
+	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0, ch_coeff_fmeu);
+	max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
+				  eq_coeff_fmeu1_ra02_m6db);
+}
+
+static void max2175_load_dab_1p2(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(dab12_map); i++)
+		max2175_write(ctx, dab12_map[i].idx, dab12_map[i].val);
+
+	ctx->decim_ratio = 1;
+
+	/* Load the Channel Filter Coefficients into channel filter bank #2 */
+	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 2, ch_coeff_dab1);
+}
+
+static void max2175_load_fmna_1p0(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(fmna1p0_map); i++)
+		max2175_write(ctx, fmna1p0_map[i].idx, fmna1p0_map[i].val);
+}
+
+static void max2175_load_fmna_2p0(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(fmna2p0_map); i++)
+		max2175_write(ctx, fmna2p0_map[i].idx, fmna2p0_map[i].val);
+}
+
+static void max2175_set_bbfilter(struct max2175 *ctx)
+{
+	if (MAX2175_IS_BAND_AM(ctx)) {
+		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_am);
+		mxm_dbg(ctx, "set_bbfilter AM: rom %d\n", ctx->rom_bbf_bw_am);
+	} else if (MAX2175_IS_DAB_MODE(ctx)) {
+		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_dab);
+		mxm_dbg(ctx, "set_bbfilter DAB: rom %d\n", ctx->rom_bbf_bw_dab);
+	} else {
+		max2175_write_bits(ctx, 12, 3, 0, ctx->rom_bbf_bw_fm);
+		mxm_dbg(ctx, "set_bbfilter FM: rom %d\n", ctx->rom_bbf_bw_fm);
+	}
+}
+
+static bool max2175_set_csm_mode(struct max2175 *ctx,
+			  enum max2175_csm_mode new_mode)
+{
+	int ret = max2175_poll_csm_ready(ctx);
+
+	if (ret)
+		return ret;
+
+	max2175_write_bits(ctx, 0, 2, 0, new_mode);
+	mxm_dbg(ctx, "set csm new mode %d\n", new_mode);
+
+	/* Wait for a fixed settle down time depending on new mode */
+	switch (new_mode) {
+	case MAX2175_PRESET_TUNE:
+		usleep_range(51100, 51500);	/* 51.1ms */
+		break;
+	/*
+	 * Other mode switches need different sleep values depending on band &
+	 * mode
+	 */
+	default:
+		break;
+	}
+
+	return max2175_poll_csm_ready(ctx);
+}
+
+static int max2175_csm_action(struct max2175 *ctx,
+			      enum max2175_csm_mode action)
+{
+	int ret;
+
+	mxm_dbg(ctx, "csm_action: %d\n", action);
+
+	/* Other actions can be added in future when needed */
+	ret = max2175_set_csm_mode(ctx, MAX2175_LOAD_TO_BUFFER);
+	if (ret)
+		return ret;
+	return max2175_set_csm_mode(ctx, MAX2175_PRESET_TUNE);
+}
+
+static int max2175_set_lo_freq(struct max2175 *ctx, u64 lo_freq)
+{
+	u64 scaled_lo_freq, scaled_npf, scaled_integer, scaled_fraction;
+	u32 frac_desired, int_desired, lo_mult = 1;
+	const u32 scale_factor = 1000000U;
+	u8 loband_bits = 0, vcodiv_bits = 0;
+	enum max2175_band band;
+	int ret;
+
+	/* Scale to larger number for precision */
+	scaled_lo_freq = lo_freq * scale_factor * 100;
+	band = max2175_read_bits(ctx, 5, 1, 0);
+
+	mxm_dbg(ctx, "set_lo_freq: scaled lo_freq %llu lo_freq %llu band %d\n",
+		scaled_lo_freq, lo_freq, band);
+
+	switch (band) {
+	case MAX2175_BAND_AM:
+		if (max2175_read_bit(ctx, 5, 7) == 0)
+			lo_mult = 16;
+		break;
+	case MAX2175_BAND_FM:
+		if (lo_freq <= 74700000) {
+			lo_mult = 16;
+		} else if (lo_freq > 74700000 && lo_freq <= 110000000) {
+			loband_bits = 1;
+		} else {
+			loband_bits = 1;
+			vcodiv_bits = 3;
+		}
+		lo_mult = 8;
+		break;
+	case MAX2175_BAND_VHF:
+		if (lo_freq <= 210000000) {
+			loband_bits = 2;
+			vcodiv_bits = 2;
+		} else {
+			loband_bits = 2;
+			vcodiv_bits = 1;
+		}
+		lo_mult = 4;
+		break;
+	default:
+		loband_bits = 3;
+		vcodiv_bits = 2;
+		lo_mult = 2;
+		break;
+	}
+
+	if (band == MAX2175_BAND_L)
+		scaled_npf = div_u64(div_u64(scaled_lo_freq, ctx->xtal_freq),
+				     lo_mult);
+	else
+		scaled_npf = div_u64(scaled_lo_freq, ctx->xtal_freq) * lo_mult;
+
+	scaled_npf = div_u64(scaled_npf, 100);
+	scaled_integer = div_u64(scaled_npf, scale_factor) * scale_factor;
+	int_desired = div_u64(scaled_npf, scale_factor);
+	scaled_fraction = scaled_npf - scaled_integer;
+	frac_desired = div_u64(scaled_fraction << 20, scale_factor);
+
+	/* Check CSM is not busy */
+	ret = max2175_poll_csm_ready(ctx);
+	if (ret)
+		return ret;
+
+	mxm_dbg(ctx, "loband %u vcodiv %u lo_mult %u scaled_npf %llu\n",
+		loband_bits, vcodiv_bits, lo_mult, scaled_npf);
+	mxm_dbg(ctx, "scaled int %llu frac %llu desired int %u frac %u\n",
+		scaled_integer, scaled_fraction, int_desired, frac_desired);
+
+	/* Write the calculated values to the appropriate registers */
+	max2175_write(ctx, 1, int_desired);
+	max2175_write_bits(ctx, 2, 3, 0, (frac_desired >> 16) & 0xf);
+	max2175_write(ctx, 3, frac_desired >> 8);
+	max2175_write(ctx, 4, frac_desired);
+	max2175_write_bits(ctx, 5, 3, 2, loband_bits);
+	max2175_write_bits(ctx, 6, 7, 6, vcodiv_bits);
+	return ret;
+}
+
+static int max2175_set_nco_freq(struct max2175 *ctx, s64 nco_freq_desired)
+{
+	s64  nco_freq, nco_val_desired;
+	u64 abs_nco_freq;
+	const u32 scale_factor = 1000000U;
+	u32 clock_rate, nco_reg;
+	int ret;
+
+	mxm_dbg(ctx, "set_nco_freq: freq %lld\n", nco_freq_desired);
+	clock_rate = ctx->xtal_freq / ctx->decim_ratio;
+	nco_freq = -nco_freq_desired;
+
+	if (nco_freq < 0)
+		abs_nco_freq = -nco_freq;
+	else
+		abs_nco_freq = nco_freq;
+
+	/* Scale up the values for precision */
+	if (abs_nco_freq < (clock_rate / 2)) {
+		nco_val_desired = div_s64(2 * nco_freq * scale_factor,
+					  clock_rate);
+	} else {
+		if (nco_freq < 0)
+			nco_val_desired =
+			div_s64(-2 * (clock_rate - abs_nco_freq) * scale_factor,
+				clock_rate);
+		else
+			nco_val_desired =
+			div_s64(2 * (clock_rate - abs_nco_freq) * scale_factor,
+				clock_rate);
+	}
+
+	/* Scale down to get the fraction */
+	if (nco_freq < 0)
+		nco_reg = 0x200000 + div_s64(nco_val_desired << 20,
+						  scale_factor);
+	else
+		nco_reg = div_s64(nco_val_desired << 20, scale_factor);
+
+	/* Check CSM is not busy */
+	ret = max2175_poll_csm_ready(ctx);
+	if (ret)
+		return ret;
+
+	mxm_dbg(ctx, "clk %u decim %u abs %llu desired %lld reg %u\n",
+		clock_rate, ctx->decim_ratio, abs_nco_freq,
+		nco_val_desired, nco_reg);
+
+	/* Write the calculated values to the appropriate registers */
+	max2175_write_bits(ctx, 7, 4, 0, (nco_reg >> 16) & 0x1f);
+	max2175_write(ctx, 8, nco_reg >> 8);
+	max2175_write(ctx, 9, nco_reg);
+	return ret;
+}
+
+static int max2175_set_rf_freq_non_am_bands(struct max2175 *ctx, u64 freq,
+					    u32 lo_pos)
+{
+	s64 adj_freq;
+	u64 low_if_freq;
+	int ret;
+
+	mxm_dbg(ctx, "rf_freq: non AM bands\n");
+
+	if (MAX2175_IS_FM_MODE(ctx))
+		low_if_freq = 128000;
+	else if (MAX2175_IS_FMHD_MODE(ctx))
+		low_if_freq = 228000;
+	else
+		return max2175_set_lo_freq(ctx, freq);
+
+	if (MAX2175_IS_BAND_VHF(ctx) == (lo_pos == MAX2175_LO_ABOVE_DESIRED))
+		adj_freq = freq + low_if_freq;
+	else
+		adj_freq = freq - low_if_freq;
+
+	ret = max2175_set_lo_freq(ctx, adj_freq);
+	if (ret)
+		return ret;
+
+	return max2175_set_nco_freq(ctx, low_if_freq);
+}
+
+static int max2175_set_rf_freq(struct max2175 *ctx, u64 freq, u32 lo_pos)
+{
+	int ret;
+
+	if (MAX2175_IS_BAND_AM(ctx))
+		ret = max2175_set_nco_freq(ctx, freq);
+	else
+		ret = max2175_set_rf_freq_non_am_bands(ctx, freq, lo_pos);
+
+	mxm_dbg(ctx, "set_rf_freq: ret %d freq %llu\n", ret, freq);
+	return ret;
+}
+
+static int max2175_tune_rf_freq(struct max2175 *ctx, u64 freq, u32 hsls)
+{
+	int ret;
+
+	ret = max2175_set_rf_freq(ctx, freq, hsls);
+	if (ret)
+		return ret;
+
+	ret = max2175_csm_action(ctx, MAX2175_BUFFER_PLUS_PRESET_TUNE);
+	if (ret)
+		return ret;
+
+	mxm_dbg(ctx, "tune_rf_freq: old %u new %llu\n", ctx->freq, freq);
+	ctx->freq = freq;
+	return ret;
+}
+
+static void max2175_set_hsls(struct max2175 *ctx, u32 lo_pos)
+{
+	mxm_dbg(ctx, "set_hsls: lo_pos %u\n", lo_pos);
+
+	if ((lo_pos == MAX2175_LO_BELOW_DESIRED) == MAX2175_IS_BAND_VHF(ctx))
+		max2175_write_bit(ctx, 5, 4, 1);
+	else
+		max2175_write_bit(ctx, 5, 4, 0);
+}
+
+static void max2175_set_eu_rx_mode(struct max2175 *ctx, u32 rx_mode)
+{
+	switch (rx_mode) {
+	case MAX2175_EU_FM_1_2:
+		max2175_load_fmeu_1p2(ctx);
+		break;
+
+	case MAX2175_DAB_1_2:
+		max2175_load_dab_1p2(ctx);
+		break;
+	}
+	/* Master is the default setting */
+	if (!ctx->master)
+		max2175_write_bit(ctx, 30, 7, 1);
+
+	/* Cache i2s_test value at this point */
+	ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
+}
+
+static void max2175_set_na_rx_mode(struct max2175 *ctx, u32 rx_mode)
+{
+	switch (rx_mode) {
+	case MAX2175_NA_FM_1_0:
+		max2175_load_fmna_1p0(ctx);
+		break;
+	case MAX2175_NA_FM_2_0:
+		max2175_load_fmna_2p0(ctx);
+		break;
+	}
+	/* Master is the default setting */
+	if (!ctx->master)
+		max2175_write_bit(ctx, 30, 7, 1);
+
+	/* Cache i2s_test value at this point */
+	ctx->i2s_test = max2175_read_bits(ctx, 104, 3, 0);
+	ctx->decim_ratio = 27;
+
+	/* Load the Channel Filter Coefficients into channel filter bank #2 */
+	max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0, ch_coeff_fmna);
+	max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
+				  eq_coeff_fmna1_ra02_m6db);
+}
+
+static int max2175_set_rx_mode(struct max2175 *ctx, u32 rx_mode, u32 hsls)
+{
+	mxm_dbg(ctx, "set_rx_mode: %u am_hiz %u\n", rx_mode, ctx->am_hiz);
+	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ)
+		max2175_set_eu_rx_mode(ctx, rx_mode);
+	else
+		max2175_set_na_rx_mode(ctx, rx_mode);
+
+	if (ctx->am_hiz) {
+		mxm_dbg(ctx, "setting AM HiZ related config\n");
+		max2175_write_bit(ctx, 50, 5, 1);
+		max2175_write_bit(ctx, 90, 7, 1);
+		max2175_write_bits(ctx, 73, 1, 0, 2);
+		max2175_write_bits(ctx, 80, 5, 0, 33);
+	}
+
+	/* Load BB filter trim values saved in ROM */
+	max2175_set_bbfilter(ctx);
+
+	/* Set HSLS */
+	max2175_set_hsls(ctx, hsls);
+
+	ctx->mode_resolved = true;
+	return 0;
+}
+
+static bool max2175_i2s_rx_mode_valid(struct max2175 *ctx,
+					 u32 mode, u32 i2s_mode)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->rx_modes[mode].i2s_modes); i++)
+		if (ctx->rx_modes[mode].i2s_modes[i] == i2s_mode)
+			return true;
+
+	v4l2_err(ctx->client, "i2s_mode %u not suitable for cur rx mode %u\n",
+		 i2s_mode, mode);
+	return false;
+}
+
+static int max2175_rx_mode_from_freq(struct max2175 *ctx, u32 freq, u32 *mode)
+{
+	unsigned int i;
+	int band = max2175_band_from_freq(freq);
+
+	/* Pick the first match always */
+	for (i = 0; i <= ctx->rx_mode->maximum; i++) {
+		if (ctx->rx_modes[i].band == band) {
+			*mode = i;
+			mxm_dbg(ctx, "rx_mode_from_freq: freq %u mode %d\n",
+				freq, *mode);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static bool max2175_freq_rx_mode_valid(struct max2175 *ctx,
+					 u32 mode, u32 freq)
+{
+	int band = max2175_band_from_freq(freq);
+
+	return (ctx->rx_modes[mode].band == band);
+}
+
+static void max2175_load_adc_presets(struct max2175 *ctx)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < 2; i++)
+		for (j = 0; j < 23; j++)
+			max2175_write(ctx, 146 + j + i * 55, adc_presets[i][j]);
+}
+
+static int max2175_init_power_manager(struct max2175 *ctx)
+{
+	int ret;
+
+	/* Execute on-chip power-up/calibration */
+	max2175_write_bit(ctx, 99, 2, 0);
+	usleep_range(1000, 1500);
+	max2175_write_bit(ctx, 99, 2, 1);
+
+	/* Wait for the power manager to finish. */
+	ret = max2175_poll_timeout(ctx, 69, 7, 7, 1, 50);
+	if (ret)
+		v4l2_err(ctx->client, "init pm failed\n");
+	return ret;
+}
+
+static int max2175_recalibrate_adc(struct max2175 *ctx)
+{
+	int ret;
+
+	/* ADC Re-calibration */
+	max2175_write(ctx, 150, 0xff);
+	max2175_write(ctx, 205, 0xff);
+	max2175_write(ctx, 147, 0x20);
+	max2175_write(ctx, 147, 0x00);
+	max2175_write(ctx, 202, 0x20);
+	max2175_write(ctx, 202, 0x00);
+
+	ret = max2175_poll_timeout(ctx, 69, 4, 3, 3, 50);
+	if (ret)
+		v4l2_err(ctx->client, "adc recalibration failed\n");
+	return ret;
+}
+
+static u8 max2175_read_rom(struct max2175 *ctx, u8 row)
+{
+	u8 data;
+
+	max2175_write_bit(ctx, 56, 4, 0);
+	max2175_write_bits(ctx, 56, 3, 0, row);
+
+	usleep_range(2000, 2500);
+	max2175_read(ctx, 58, &data);
+
+	max2175_write_bits(ctx, 56, 3, 0, 0);
+
+	mxm_dbg(ctx, "read_rom: row %d data 0x%02x\n", row, data);
+	return data;
+}
+
+static void max2175_load_from_rom(struct max2175 *ctx)
+{
+	u8 data = 0;
+
+	data = max2175_read_rom(ctx, 0);
+	ctx->rom_bbf_bw_am = data & 0x0f;
+	max2175_write_bits(ctx, 81, 3, 0, data >> 4);
+
+	data = max2175_read_rom(ctx, 1);
+	ctx->rom_bbf_bw_fm = data & 0x0f;
+	ctx->rom_bbf_bw_dab = data >> 4;
+
+	data = max2175_read_rom(ctx, 2);
+	max2175_write_bits(ctx, 82, 4, 0, data & 0x1f);
+	max2175_write_bits(ctx, 82, 7, 5, data >> 5);
+
+	data = max2175_read_rom(ctx, 3);
+	if (ctx->am_hiz) {
+		data &= 0x0f;
+		data |= max2175_read_rom(ctx, 7) & 0x40 >> 2;
+		if (!data)
+			data |= 2;
+	} else {
+		data = data & 0xf0 >> 4;
+		data |= max2175_read_rom(ctx, 7) & 0x80 >> 3;
+		if (!data)
+			data |= 30;
+	}
+	max2175_write_bits(ctx, 80, 5, 0, data + 31);
+
+	data = max2175_read_rom(ctx, 6);
+	max2175_write_bits(ctx, 81, 7, 6, data >> 6);
+}
+
+static void max2175_load_full_fm_eu_1p0(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(full_fm_eu_1p0); i++)
+		max2175_write(ctx, i + 1, full_fm_eu_1p0[i]);
+
+	usleep_range(5000, 5500);
+	ctx->decim_ratio = 36;
+}
+
+static void max2175_load_full_fm_na_1p0(struct max2175 *ctx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(full_fm_na_1p0); i++)
+		max2175_write(ctx, i + 1, full_fm_na_1p0[i]);
+
+	usleep_range(5000, 5500);
+	ctx->decim_ratio = 27;
+}
+
+static int max2175_core_init(struct max2175 *ctx, u32 refout_bits)
+{
+	int ret;
+
+	/* MAX2175 uses 36.864MHz clock for EU & 40.154MHz for NA region */
+	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ)
+		max2175_load_full_fm_eu_1p0(ctx);
+	else
+		max2175_load_full_fm_na_1p0(ctx);
+
+	/* The default settings assume master */
+	if (!ctx->master)
+		max2175_write_bit(ctx, 30, 7, 1);
+
+	mxm_dbg(ctx, "refout_bits %u\n", refout_bits);
+
+	/* Set REFOUT */
+	max2175_write_bits(ctx, 56, 7, 5, refout_bits);
+
+	/* ADC Reset */
+	max2175_write_bit(ctx, 99, 1, 0);
+	usleep_range(1000, 1500);
+	max2175_write_bit(ctx, 99, 1, 1);
+
+	/* Load ADC preset values */
+	max2175_load_adc_presets(ctx);
+
+	/* Initialize the power management state machine */
+	ret = max2175_init_power_manager(ctx);
+	if (ret)
+		return ret;
+
+	/* Recalibrate ADC */
+	ret = max2175_recalibrate_adc(ctx);
+	if (ret)
+		return ret;
+
+	/* Load ROM values to appropriate registers */
+	max2175_load_from_rom(ctx);
+
+	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ) {
+		/* Load FIR coefficients into bank 0 */
+		max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0,
+					  ch_coeff_fmeu);
+		max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
+					  eq_coeff_fmeu1_ra02_m6db);
+	} else {
+		/* Load FIR coefficients into bank 0 */
+		max2175_set_filter_coeffs(ctx, MAX2175_CH_MSEL, 0,
+					  ch_coeff_fmna);
+		max2175_set_filter_coeffs(ctx, MAX2175_EQ_MSEL, 0,
+					  eq_coeff_fmna1_ra02_m6db);
+	}
+	mxm_dbg(ctx, "core initialized\n");
+	return 0;
+}
+
+static void max2175_s_ctrl_i2s_mode(struct max2175 *ctx, u32 i2s_mode)
+{
+	mxm_dbg(ctx, "s_ctrl_i2s_mode: %u resolved %d\n", i2s_mode,
+		ctx->mode_resolved);
+
+	/*
+	 * Update i2s mode on device only when mode is resolved & it is valid
+	 * for the configured mode
+	 */
+	if (ctx->mode_resolved &&
+	    max2175_i2s_rx_mode_valid(ctx, ctx->rx_mode->val, i2s_mode))
+		max2175_update_i2s_mode(ctx, ctx->rx_mode->val, i2s_mode);
+}
+
+static void max2175_s_ctrl_rx_mode(struct max2175 *ctx, u32 rx_mode)
+{
+	/* Load mode. Range check already done */
+	max2175_set_rx_mode(ctx, rx_mode, ctx->hsls->val);
+
+	/* Get current i2s_mode and update if needed for given rx_mode */
+	if (max2175_i2s_rx_mode_valid(ctx, rx_mode, ctx->i2s_mode->val))
+		max2175_update_i2s_mode(ctx, rx_mode, ctx->i2s_mode->val);
+	else
+		ctx->i2s_mode->val = max2175_read_bits(ctx, 29, 2, 0);
+
+	mxm_dbg(ctx, "s_ctrl_rx_mode: %u curr freq %u\n", rx_mode, ctx->freq);
+
+	/* Check if current freq valid for mode & update */
+	if (max2175_freq_rx_mode_valid(ctx, rx_mode, ctx->freq))
+		max2175_tune_rf_freq(ctx, ctx->freq, ctx->hsls->val);
+	else
+		/* Use default freq of mode if current freq is not valid */
+		max2175_tune_rf_freq(ctx, ctx->rx_modes[rx_mode].freq,
+				     ctx->hsls->val);
+}
+
+static int max2175_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct max2175 *ctx = max2175_from_ctrl_hdl(ctrl->handler);
+	int ret = 0;
+
+	mxm_dbg(ctx, "s_ctrl: id 0x%x, val %u\n", ctrl->id, ctrl->val);
+	switch (ctrl->id) {
+	case V4L2_CID_MAX2175_I2S_ENABLE:
+		max2175_i2s_enable(ctx, ctrl->val == 1);
+		break;
+	case V4L2_CID_MAX2175_I2S_MODE:
+		max2175_s_ctrl_i2s_mode(ctx, ctrl->val);
+		break;
+	case V4L2_CID_MAX2175_HSLS:
+		max2175_set_hsls(ctx, ctx->hsls->val);
+		break;
+	case V4L2_CID_MAX2175_RX_MODE:
+		max2175_s_ctrl_rx_mode(ctx, ctrl->val);
+		break;
+	}
+
+	return ret;
+}
+
+static int max2175_get_lna_gain(struct max2175 *ctx)
+{
+	int gain = 0;
+	enum max2175_band band = max2175_read_bits(ctx, 5, 1, 0);
+
+	switch (band) {
+	case MAX2175_BAND_AM:
+		gain = max2175_read_bits(ctx, 51, 3, 1);
+		break;
+	case MAX2175_BAND_FM:
+		gain = max2175_read_bits(ctx, 50, 3, 1);
+		break;
+	case MAX2175_BAND_VHF:
+		gain = max2175_read_bits(ctx, 52, 3, 0);
+		break;
+	default:
+		break;
+	}
+	return gain;
+}
+
+static int max2175_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct max2175 *ctx = max2175_from_ctrl_hdl(ctrl->handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_RF_TUNER_LNA_GAIN:
+		ctrl->val = max2175_get_lna_gain(ctx);
+		break;
+	case V4L2_CID_RF_TUNER_IF_GAIN:
+		ctrl->val = max2175_read_bits(ctx, 49, 4, 0);
+		break;
+	case V4L2_CID_RF_TUNER_PLL_LOCK:
+		ctrl->val = (max2175_read_bits(ctx, 60, 7, 6) == 3);
+		break;
+	}
+	mxm_dbg(ctx, "g_volatile_ctrl: id 0x%x val %d\n", ctrl->id, ctrl->val);
+	return 0;
+};
+
+static int max2175_set_freq_and_mode(struct max2175 *ctx, u32 freq)
+{
+	u32 rx_mode;
+	int ret;
+
+	/* Get band from frequency */
+	ret = max2175_rx_mode_from_freq(ctx, freq, &rx_mode);
+	if (ret)
+		return ret;
+
+	mxm_dbg(ctx, "set_freq_and_mode: freq %u rx_mode %d\n", freq, rx_mode);
+
+	/* Load mode */
+	max2175_set_rx_mode(ctx, rx_mode, ctx->hsls->val);
+	ctx->rx_mode->val = rx_mode;
+
+	/* Get current i2s_mode and update if needed for given rx_mode */
+	if (max2175_i2s_rx_mode_valid(ctx, rx_mode, ctx->i2s_mode->val))
+		max2175_update_i2s_mode(ctx, rx_mode, ctx->i2s_mode->val);
+	else
+		ctx->i2s_mode->val = max2175_read_bits(ctx, 29, 2, 0);
+
+	/* Tune to the new freq given */
+	return max2175_tune_rf_freq(ctx, freq, ctx->hsls->val);
+}
+
+static int max2175_s_frequency(struct v4l2_subdev *sd,
+			       const struct v4l2_frequency *vf)
+{
+	struct max2175 *ctx = max2175_from_sd(sd);
+	u32 freq;
+	int ret = 0;
+
+	mxm_dbg(ctx, "s_freq: new %u curr %u, mode_resolved %d\n",
+		vf->frequency, ctx->freq, ctx->mode_resolved);
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+
+	freq = clamp(vf->frequency, ctx->bands_rf->rangelow,
+		     ctx->bands_rf->rangehigh);
+
+	/* Check new freq valid for rx_mode if already resolved */
+	if (ctx->mode_resolved &&
+	    max2175_freq_rx_mode_valid(ctx, ctx->rx_mode->val, freq))
+		ret = max2175_tune_rf_freq(ctx, freq, ctx->hsls->val);
+	else
+		/* Find default rx_mode for freq and tune to it */
+		ret = max2175_set_freq_and_mode(ctx, freq);
+
+	mxm_dbg(ctx, "s_freq: ret %d curr %u mode_resolved %d mode %u\n",
+		ret, ctx->freq, ctx->mode_resolved, ctx->rx_mode->val);
+	return ret;
+}
+
+static int max2175_g_frequency(struct v4l2_subdev *sd,
+			       struct v4l2_frequency *vf)
+{
+	struct max2175 *ctx = max2175_from_sd(sd);
+	int ret = 0;
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+
+	/* RF freq */
+	vf->type = V4L2_TUNER_RF;
+	vf->frequency = ctx->freq;
+	return ret;
+}
+
+static int max2175_enum_freq_bands(struct v4l2_subdev *sd,
+			    struct v4l2_frequency_band *band)
+{
+	struct max2175 *ctx = max2175_from_sd(sd);
+
+	if (band->tuner == 0 && band->index == 0)
+		*band = *ctx->bands_rf;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int max2175_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+	struct max2175 *ctx = max2175_from_sd(sd);
+
+	if (vt->index > 0)
+		return -EINVAL;
+
+	strlcpy(vt->name, "RF", sizeof(vt->name));
+	vt->type = V4L2_TUNER_RF;
+	vt->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
+	vt->rangelow = ctx->bands_rf->rangelow;
+	vt->rangehigh = ctx->bands_rf->rangehigh;
+	return 0;
+}
+
+static int max2175_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
+{
+	/* Check tuner index is valid */
+	if (vt->index > 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_tuner_ops max2175_tuner_ops = {
+	.s_frequency = max2175_s_frequency,
+	.g_frequency = max2175_g_frequency,
+	.enum_freq_bands = max2175_enum_freq_bands,
+	.g_tuner = max2175_g_tuner,
+	.s_tuner = max2175_s_tuner,
+};
+
+static const struct v4l2_subdev_ops max2175_ops = {
+	.tuner = &max2175_tuner_ops,
+};
+
+static const struct v4l2_ctrl_ops max2175_ctrl_ops = {
+	.s_ctrl = max2175_s_ctrl,
+	.g_volatile_ctrl = max2175_g_volatile_ctrl,
+};
+
+static const struct v4l2_ctrl_config max2175_i2s_en = {
+	.ops = &max2175_ctrl_ops,
+	.id = V4L2_CID_MAX2175_I2S_ENABLE,
+	.name = "I2S Enable",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.min = 0,
+	.max = 1,
+	.step = 1,
+	.def = 1,
+};
+
+static const char * const max2175_ctrl_i2s_modes[] = {
+	[MAX2175_I2S_MODE0]	= "i2s mode 0",
+	[MAX2175_I2S_MODE1]	= "i2s mode 1 (skipped)",
+	[MAX2175_I2S_MODE2]	= "i2s mode 2",
+	[MAX2175_I2S_MODE3]	= "i2s mode 3",
+	[MAX2175_I2S_MODE4]	= "i2s mode 4",
+};
+
+static const struct v4l2_ctrl_config max2175_i2s_mode = {
+	.ops = &max2175_ctrl_ops,
+	.id = V4L2_CID_MAX2175_I2S_MODE,
+	.name = "I2S MODE value",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(max2175_ctrl_i2s_modes) - 1,
+	.def = 0,
+	.menu_skip_mask = 0x02,
+	.qmenu = max2175_ctrl_i2s_modes,
+};
+
+static const struct v4l2_ctrl_config max2175_hsls = {
+	.ops = &max2175_ctrl_ops,
+	.id = V4L2_CID_MAX2175_HSLS,
+	.name = "HSLS above/below desired",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0,
+	.max = 1,
+	.step = 1,
+	.def = 1,
+};
+
+static const char * const max2175_ctrl_eu_rx_modes[] = {
+	[MAX2175_EU_FM_1_2]	= "EU FM 1.2",
+	[MAX2175_DAB_1_2]	= "DAB 1.2",
+};
+
+static const char * const max2175_ctrl_na_rx_modes[] = {
+	[MAX2175_NA_FM_1_0]	= "NA FM 1.0",
+	[MAX2175_NA_FM_2_0]	= "NA FM 2.0",
+};
+
+static const struct v4l2_ctrl_config max2175_eu_rx_mode = {
+	.ops = &max2175_ctrl_ops,
+	.id = V4L2_CID_MAX2175_RX_MODE,
+	.name = "RX MODE",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(max2175_ctrl_eu_rx_modes) - 1,
+	.def = 0,
+	.qmenu = max2175_ctrl_eu_rx_modes,
+};
+
+static const struct v4l2_ctrl_config max2175_na_rx_mode = {
+	.ops = &max2175_ctrl_ops,
+	.id = V4L2_CID_MAX2175_RX_MODE,
+	.name = "RX MODE",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
+	.def = 0,
+	.qmenu = max2175_ctrl_na_rx_modes,
+};
+
+static int max2175_refout_load_to_bits(struct i2c_client *client, u32 load,
+				       u32 *bits)
+{
+	if (load >= 0 && load <= 40)
+		*bits = load / 10;
+	else if (load >= 60 && load <= 70)
+		*bits = load / 10 - 1;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int max2175_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct max2175 *ctx;
+	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
+	struct clk *clk;
+	struct regmap *regmap;
+	bool master = true, am_hiz = false;
+	u32 refout_load, refout_bits = 0;	/* REFOUT disabled */
+	int ret;
+
+	/* Parse DT properties */
+	if (of_find_property(client->dev.of_node, "maxim,slave", NULL))
+		master = false;
+
+	if (of_find_property(client->dev.of_node, "maxim,am-hiz", NULL))
+		am_hiz = true;
+
+	if (!of_property_read_u32(client->dev.of_node, "maxim,refout-load-pF",
+				  &refout_load)) {
+		ret = max2175_refout_load_to_bits(client, refout_load,
+						  &refout_bits);
+		if (ret) {
+			dev_err(&client->dev, "invalid refout_load %u\n",
+				refout_load);
+			return -EINVAL;
+		}
+	}
+
+	clk = devm_clk_get(&client->dev, "xtal");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_err(&client->dev, "cannot get xtal clock %d\n", ret);
+		return -ENODEV;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &max2175_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&client->dev, "regmap init failed %d\n", ret);
+		return -ENODEV;
+	}
+
+	/* Alloc tuner context */
+	ctx = devm_kzalloc(&client->dev, sizeof(*ctx), GFP_KERNEL);
+	if (ctx == NULL)
+		return -ENOMEM;
+
+	sd = &ctx->sd;
+	ctx->master = master;
+	ctx->am_hiz = am_hiz;
+	ctx->mode_resolved = false;
+	ctx->regmap = regmap;
+	ctx->xtal_freq = clk_get_rate(clk);
+	dev_info(&client->dev, "xtal freq %luHz\n", ctx->xtal_freq);
+
+	v4l2_i2c_subdev_init(sd, client, &max2175_ops);
+	ctx->client = client;
+
+	sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	/* Controls */
+	hdl = &ctx->ctrl_hdl;
+	ret = v4l2_ctrl_handler_init(hdl, 7);
+	if (ret) {
+		dev_err(&client->dev, "ctrl handler init failed\n");
+		goto err;
+	}
+
+	ctx->lna_gain = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
+					  V4L2_CID_RF_TUNER_LNA_GAIN,
+					  0, 15, 1, 2);
+	ctx->lna_gain->flags |= (V4L2_CTRL_FLAG_VOLATILE |
+				 V4L2_CTRL_FLAG_READ_ONLY);
+	ctx->if_gain = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
+					 V4L2_CID_RF_TUNER_IF_GAIN,
+					 0, 31, 1, 0);
+	ctx->if_gain->flags |= (V4L2_CTRL_FLAG_VOLATILE |
+				V4L2_CTRL_FLAG_READ_ONLY);
+	ctx->pll_lock = v4l2_ctrl_new_std(hdl, &max2175_ctrl_ops,
+					  V4L2_CID_RF_TUNER_PLL_LOCK,
+					  0, 1, 1, 0);
+	ctx->pll_lock->flags |= (V4L2_CTRL_FLAG_VOLATILE |
+				 V4L2_CTRL_FLAG_READ_ONLY);
+	ctx->i2s_en = v4l2_ctrl_new_custom(hdl, &max2175_i2s_en, NULL);
+	ctx->i2s_mode = v4l2_ctrl_new_custom(hdl, &max2175_i2s_mode, NULL);
+	ctx->hsls = v4l2_ctrl_new_custom(hdl, &max2175_hsls, NULL);
+
+	if (ctx->xtal_freq == MAX2175_EU_XTAL_FREQ) {
+		ctx->rx_mode = v4l2_ctrl_new_custom(hdl,
+						    &max2175_eu_rx_mode, NULL);
+		ctx->rx_modes = eu_rx_modes;
+		ctx->bands_rf = &eu_bands_rf;
+	} else {
+		ctx->rx_mode = v4l2_ctrl_new_custom(hdl,
+						    &max2175_na_rx_mode, NULL);
+		ctx->rx_modes = na_rx_modes;
+		ctx->bands_rf = &na_bands_rf;
+	}
+	ctx->sd.ctrl_handler = &ctx->ctrl_hdl;
+
+	/* Set the defaults */
+	ctx->freq = ctx->bands_rf->rangelow;
+
+	/* Register subdev */
+	ret = v4l2_async_register_subdev(sd);
+	if (ret) {
+		dev_err(&client->dev, "register subdev failed\n");
+		goto err_reg;
+	}
+
+	/* Initialize device */
+	ret = max2175_core_init(ctx, refout_bits);
+	if (ret)
+		goto err_init;
+
+	dev_info(&client->dev, "probed\n");
+	return 0;
+
+err_init:
+	v4l2_async_unregister_subdev(sd);
+err_reg:
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
+err:
+	return ret;
+}
+
+static int max2175_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct max2175 *ctx = max2175_from_sd(sd);
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
+	v4l2_async_unregister_subdev(sd);
+	dev_info(&client->dev, "removed\n");
+	return 0;
+}
+
+static const struct i2c_device_id max2175_id[] = {
+	{ DRIVER_NAME, 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, max2175_id);
+
+static const struct of_device_id max2175_of_ids[] = {
+	{ .compatible = "maxim, max2175", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max2175_of_ids);
+
+static struct i2c_driver max2175_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.of_match_table = max2175_of_ids,
+	},
+	.probe		= max2175_probe,
+	.remove		= max2175_remove,
+	.id_table	= max2175_id,
+};
+
+module_i2c_driver(max2175_driver);
+
+MODULE_DESCRIPTION("Maxim MAX2175 RF to Bits tuner driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>");
diff --git a/drivers/media/i2c/max2175/max2175.h b/drivers/media/i2c/max2175/max2175.h
new file mode 100644
index 0000000..2d858aa
--- /dev/null
+++ b/drivers/media/i2c/max2175/max2175.h
@@ -0,0 +1,108 @@ 
+/*
+ * Maxim Integrated MAX2175 RF to Bits tuner driver
+ *
+ * This driver & most of the hard coded values are based on the reference
+ * application delivered by Maxim for this chip.
+ *
+ * Copyright (C) 2016 Maxim Integrated Products
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MAX2175_H__
+#define __MAX2175_H__
+
+#define MAX2175_EU_XTAL_FREQ	36864000	/* In Hz */
+#define MAX2175_NA_XTAL_FREQ	40186125	/* In Hz */
+
+enum max2175_region {
+	MAX2175_REGION_EU = 0,	/* Europe */
+	MAX2175_REGION_NA,	/* North America */
+};
+
+
+enum max2175_band {
+	MAX2175_BAND_AM = 0,
+	MAX2175_BAND_FM,
+	MAX2175_BAND_VHF,
+	MAX2175_BAND_L,
+};
+
+enum max2175_eu_mode {
+	/* EU modes */
+	MAX2175_EU_FM_1_2 = 0,
+	MAX2175_DAB_1_2,
+
+	/* Other possible modes to add in future
+	 * MAX2175_DAB_1_0,
+	 * MAX2175_DAB_1_3,
+	 * MAX2175_EU_FM_2_2,
+	 * MAX2175_EU_FMHD_4_0,
+	 * MAX2175_EU_AM_1_0,
+	 * MAX2175_EU_AM_2_2,
+	 */
+};
+
+enum max2175_na_mode {
+	/* NA modes */
+	MAX2175_NA_FM_1_0 = 0,
+	MAX2175_NA_FM_2_0,
+
+	/* Other possible modes to add in future
+	 * MAX2175_NA_FMHD_1_0,
+	 * MAX2175_NA_FMHD_1_2,
+	 * MAX2175_NA_AM_1_0,
+	 * MAX2175_NA_AM_1_2,
+	 */
+};
+
+/* Supported I2S modes */
+enum {
+	MAX2175_I2S_MODE0 = 0,
+	MAX2175_I2S_MODE1,
+	MAX2175_I2S_MODE2,
+	MAX2175_I2S_MODE3,
+	MAX2175_I2S_MODE4,
+};
+
+/* Coefficient table groups */
+enum {
+	MAX2175_CH_MSEL = 0,
+	MAX2175_EQ_MSEL,
+	MAX2175_AA_MSEL,
+};
+
+/* HSLS LO injection polarity */
+enum {
+	MAX2175_LO_BELOW_DESIRED = 0,
+	MAX2175_LO_ABOVE_DESIRED,
+};
+
+/* Channel FSM modes */
+enum max2175_csm_mode {
+	MAX2175_LOAD_TO_BUFFER = 0,
+	MAX2175_PRESET_TUNE,
+	MAX2175_SEARCH,
+	MAX2175_AF_UPDATE,
+	MAX2175_JUMP_FAST_TUNE,
+	MAX2175_CHECK,
+	MAX2175_LOAD_AND_SWAP,
+	MAX2175_END,
+	MAX2175_BUFFER_PLUS_PRESET_TUNE,
+	MAX2175_BUFFER_PLUS_SEARCH,
+	MAX2175_BUFFER_PLUS_AF_UPDATE,
+	MAX2175_BUFFER_PLUS_JUMP_FAST_TUNE,
+	MAX2175_BUFFER_PLUS_CHECK,
+	MAX2175_BUFFER_PLUS_LOAD_AND_SWAP,
+	MAX2175_NO_ACTION
+};
+
+#endif /* __MAX2175_H__ */