| Message ID | 1478715118-12848-1-git-send-email-harninder.rai@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 09, 2016 at 11:41:58PM +0530, Harninder Rai wrote: > Add the device tree support for FSL LS1012A SoC. Can we have a brief introduction of this SoC in commit log? > Following levels of DTSI/DTS files have been created for the LS1012A > SoC family: > > - fsl-ls1012a.dtsi: > DTS-Include file for FSL LS1012A SoC. > > - fsl-ls1012a-frdm.dts: > DTS file for FSL LS1012A FRDM board. > > - fsl-ls1012a-qds.dts: > DTS file for FSL LS1012A QDS board. > > - fsl-ls1012a-rdb.dts: > DTS file for FSL LS1012A RDB board. > > Signed-off-by: Harninder Rai <harninder.rai@nxp.com> > Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 3 + > arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 115 ++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 128 +++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 59 +++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 248 +++++++++++++++++++++ > 5 files changed, 553 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 6602718..39db645 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -1,3 +1,6 @@ > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb It seems that the patch is not generated against mainline kernel. We do not have fsl-ls1046a-qds.dtb target in mainline kernel. > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > new file mode 100644 > index 0000000..1f2da79 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > @@ -0,0 +1,115 @@ > +/* > + * Device Tree file for Freescale LS1012A Freedom Board. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include "fsl-ls1012a.dtsi" > + > +/ { > + model = "LS1012A Freedom Board"; > + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; > + > + sys_mclk: clock-mclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + }; > + > + reg_1p8v: regulator@0 { Drop the unit-address from node name, and name it like regulator-1p8v. > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,widgets = > + "Microphone", "Microphone Jack", > + "Headphone", "Headphone Jack", > + "Speaker", "Speaker Ext", > + "Line", "Line In Jack"; > + simple-audio-card,routing = > + "MIC_IN", "Microphone Jack", > + "Microphone Jack", "Mic Bias", > + "LINE_IN", "Line In Jack", > + "Headphone Jack", "HP_OUT", > + "Speaker Ext", "LINE_OUT"; > + > + simple-audio-card,cpu { > + sound-dai = <&sai2>; > + frame-master; > + bitclock-master; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&codec>; > + frame-master; > + bitclock-master; > + system-clock-frequency = <25000000>; > + }; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + codec: sgtl5000@a { > + #sound-dai-cells = <0>; > + compatible = "fsl,sgtl5000"; > + reg = <0xa>; > + VDDA-supply = <®_1p8v>; > + VDDIO-supply = <®_1p8v>; > + clocks = <&sys_mclk>; > + }; > +}; > + > +&duart0 { Please sort labeled nodes alphabetically. > + status = "okay"; > +}; > + > +&sai2 { > + status = "okay"; > +}; <snip> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > new file mode 100644 > index 0000000..0bf5b64 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > @@ -0,0 +1,248 @@ > +/* > + * Device Tree Include file for Freescale Layerscape-1012A family SoC. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + compatible = "fsl,ls1012a"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0>; > + clocks = <&clockgen 1 0>; > + #cooling-cells = <2>; > + }; > + }; > + > + sysclk: sysclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + clock-output-names = "sysclk"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + /* Physical Secure PPI */ > + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, > + /* Physical Non-Secure PPI */ > + <1 14 IRQ_TYPE_LEVEL_LOW>, > + /* Virtual PPI */ > + <1 11 IRQ_TYPE_LEVEL_LOW>, > + /* Hypervisor PPI */ > + <1 10 IRQ_TYPE_LEVEL_LOW>; The following form should be easier for read. interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure PPI */ <1 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure PPI */ <1 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual PPI */ <1 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor PPI */ > + }; > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <0 106 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + gic: interrupt-controller@1400000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ > + <0x0 0x1402000 0 0x2000>, /* GICC */ > + <0x0 0x1404000 0 0x2000>, /* GICH */ > + <0x0 0x1406000 0 0x2000>; /* GICV */ > + interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + reboot { > + compatible = "syscon-reboot"; > + regmap = <&dcfg>; > + offset = <0xb0>; > + mask = <0x02>; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clockgen: clocking@1ee1000 { > + compatible = "fsl,ls1012a-clockgen"; > + reg = <0x0 0x1ee1000 0x0 0x1000>; > + #clock-cells = <2>; > + clocks = <&sysclk>; > + }; > + > + scfg: scfg@1570000 { > + compatible = "fsl,ls1012a-scfg", "syscon"; > + reg = <0x0 0x1570000 0x0 0x10000>; > + big-endian; > + }; Please sort these nodes with unit-address in order of the address. Shawn > + > + dcfg: dcfg@1ee0000 { > + compatible = "fsl,ls1012a-dcfg", > + "syscon"; > + reg = <0x0 0x1ee0000 0x0 0x10000>; > + big-endian; > + }; > + > + i2c0: i2c@2180000 { > + compatible = "fsl,vf610-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x2180000 0x0 0x10000>; > + interrupts = <0 56 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@2190000 { > + compatible = "fsl,vf610-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x2190000 0x0 0x10000>; > + interrupts = <0 57 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + status = "disabled"; > + }; > + > + duart0: serial@21c0500 { > + compatible = "fsl,ns16550", "ns16550a"; > + reg = <0x00 0x21c0500 0x0 0x100>; > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 0>; > + }; > + > + duart1: serial@21c0600 { > + compatible = "fsl,ns16550", "ns16550a"; > + reg = <0x00 0x21c0600 0x0 0x100>; > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 0>; > + }; > + > + gpio0: gpio@2300000 { > + compatible = "fsl,qoriq-gpio"; > + reg = <0x0 0x2300000 0x0 0x10000>; > + interrupts = <0 66 IRQ_TYPE_LEVEL_LOW>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpio1: gpio@2310000 { > + compatible = "fsl,qoriq-gpio"; > + reg = <0x0 0x2310000 0x0 0x10000>; > + interrupts = <0 67 IRQ_TYPE_LEVEL_LOW>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + wdog0: wdog@2ad0000 { > + compatible = "fsl,ls1012a-wdt", > + "fsl,imx21-wdt"; > + reg = <0x0 0x2ad0000 0x0 0x10000>; > + interrupts = <0 83 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + big-endian; > + }; > + > + sai1: sai@2b50000 { > + #sound-dai-cells = <0>; > + compatible = "fsl,vf610-sai"; > + reg = <0x0 0x2b50000 0x0 0x10000>; > + interrupts = <0 148 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > + <&clockgen 4 3>, <&clockgen 4 3>; > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + dma-names = "tx", "rx"; > + dmas = <&edma0 1 47>, > + <&edma0 1 46>; > + status = "disabled"; > + }; > + > + sai2: sai@2b60000 { > + #sound-dai-cells = <0>; > + compatible = "fsl,vf610-sai"; > + reg = <0x0 0x2b60000 0x0 0x10000>; > + interrupts = <0 149 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > + <&clockgen 4 3>, <&clockgen 4 3>; > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + dma-names = "tx", "rx"; > + dmas = <&edma0 1 45>, > + <&edma0 1 44>; > + status = "disabled"; > + }; > + > + edma0: edma@2c00000 { > + #dma-cells = <2>; > + compatible = "fsl,vf610-edma"; > + reg = <0x0 0x2c00000 0x0 0x10000>, > + <0x0 0x2c10000 0x0 0x10000>, > + <0x0 0x2c20000 0x0 0x10000>; > + interrupts = <0 103 IRQ_TYPE_LEVEL_LOW>, > + <0 103 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "edma-tx", "edma-err"; > + dma-channels = <32>; > + big-endian; > + clock-names = "dmamux0", "dmamux1"; > + clocks = <&clockgen 4 3>, > + <&clockgen 4 3>; > + }; > + > + sata: sata@3200000 { > + compatible = "fsl,ls1012a-ahci"; > + reg = <0x0 0x3200000 0x0 0x10000>; > + interrupts = <0 69 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + }; > + }; > +}; > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Mon, Nov 14, 2016 at 03:13:10PM +0800, Shawn Guo wrote: > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > > index 6602718..39db645 100644 > > --- a/arch/arm64/boot/dts/freescale/Makefile > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > @@ -1,3 +1,6 @@ > > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb > > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb > > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > > It seems that the patch is not generated against mainline kernel. We do > not have fsl-ls1046a-qds.dtb target in mainline kernel. Sorry, forgot that we just added it in this development cycle. Shawn
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > > It seems that the patch is not generated against mainline kernel. We do not > have fsl-ls1046a-qds.dtb target in mainline kernel. You already clarified in the following mail :) > > + > > + reg_1p8v: regulator@0 { > > Drop the unit-address from node name, and name it like regulator-1p8v. Ok. Will take care in V2 > > + > > +&duart0 { > > Please sort labeled nodes alphabetically. Ok Sure > > > + status = "okay"; > > +}; > > + > > +&sai2 { > > + status = "okay"; > > +}; > > <snip> > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > > new file mode 100644 > > index 0000000..0bf5b64 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > > @@ -0,0 +1,248 @@ > > +/* > > + * Device Tree Include file for Freescale Layerscape-1012A family SoC. > > + * > > + * Copyright 2016, Freescale Semiconductor > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPLv2 or the X11 license, at your option. Note that this > > +dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This library is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of the > > + * License, or (at your option) any later version. > > + * > > + * This library is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY > KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR > COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, > ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE > OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/irq.h> > > + > > +/ { > > + compatible = "fsl,ls1012a"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0>; > > + clocks = <&clockgen 1 0>; > > + #cooling-cells = <2>; > > + }; > > + }; > > + > > + sysclk: sysclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <100000000>; > > + clock-output-names = "sysclk"; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + /* Physical Secure PPI */ > > + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, > > + /* Physical Non-Secure PPI */ > > + <1 14 IRQ_TYPE_LEVEL_LOW>, > > + /* Virtual PPI */ > > + <1 11 IRQ_TYPE_LEVEL_LOW>, > > + /* Hypervisor PPI */ > > + <1 10 IRQ_TYPE_LEVEL_LOW>; > > The following form should be easier for read. > > interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure > PPI */ > <1 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non- > Secure PPI */ > <1 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual PPI */ > <1 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor PPI > */ > > Agreed. My bad. Will correct in v2 > > + }; > > + > > + pmu { > > + compatible = "arm,armv8-pmuv3"; > > + interrupts = <0 106 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + gic: interrupt-controller@1400000 { > > + compatible = "arm,gic-400"; > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ > > + <0x0 0x1402000 0 0x2000>, /* GICC */ > > + <0x0 0x1404000 0 0x2000>, /* GICH */ > > + <0x0 0x1406000 0 0x2000>; /* GICV */ > > + interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + reboot { > > + compatible = "syscon-reboot"; > > + regmap = <&dcfg>; > > + offset = <0xb0>; > > + mask = <0x02>; > > + }; > > + > > + soc { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + clockgen: clocking@1ee1000 { > > + compatible = "fsl,ls1012a-clockgen"; > > + reg = <0x0 0x1ee1000 0x0 0x1000>; > > + #clock-cells = <2>; > > + clocks = <&sysclk>; > > + }; > > + > > + scfg: scfg@1570000 { > > + compatible = "fsl,ls1012a-scfg", "syscon"; > > + reg = <0x0 0x1570000 0x0 0x10000>; > > + big-endian; > > + }; > > Please sort these nodes with unit-address in order of the address. > > Shawn > > > + > > + dcfg: dcfg@1ee0000 { > > + compatible = "fsl,ls1012a-dcfg", > > + "syscon"; > > + reg = <0x0 0x1ee0000 0x0 0x10000>; > > + big-endian; > > + }; > > + > > + i2c0: i2c@2180000 { > > + compatible = "fsl,vf610-i2c"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0x0 0x2180000 0x0 0x10000>; > > + interrupts = <0 56 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 0>; > > + status = "disabled"; > > + }; > > + > > + i2c1: i2c@2190000 { > > + compatible = "fsl,vf610-i2c"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0x0 0x2190000 0x0 0x10000>; > > + interrupts = <0 57 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 0>; > > + status = "disabled"; > > + }; > > + > > + duart0: serial@21c0500 { > > + compatible = "fsl,ns16550", "ns16550a"; > > + reg = <0x00 0x21c0500 0x0 0x100>; > > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clockgen 4 0>; > > + }; > > + > > + duart1: serial@21c0600 { > > + compatible = "fsl,ns16550", "ns16550a"; > > + reg = <0x00 0x21c0600 0x0 0x100>; > > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clockgen 4 0>; > > + }; > > + > > + gpio0: gpio@2300000 { > > + compatible = "fsl,qoriq-gpio"; > > + reg = <0x0 0x2300000 0x0 0x10000>; > > + interrupts = <0 66 IRQ_TYPE_LEVEL_LOW>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpio1: gpio@2310000 { > > + compatible = "fsl,qoriq-gpio"; > > + reg = <0x0 0x2310000 0x0 0x10000>; > > + interrupts = <0 67 IRQ_TYPE_LEVEL_LOW>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + wdog0: wdog@2ad0000 { > > + compatible = "fsl,ls1012a-wdt", > > + "fsl,imx21-wdt"; > > + reg = <0x0 0x2ad0000 0x0 0x10000>; > > + interrupts = <0 83 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 0>; > > + big-endian; > > + }; > > + > > + sai1: sai@2b50000 { > > + #sound-dai-cells = <0>; > > + compatible = "fsl,vf610-sai"; > > + reg = <0x0 0x2b50000 0x0 0x10000>; > > + interrupts = <0 148 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > > + <&clockgen 4 3>, <&clockgen 4 3>; > > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > > + dma-names = "tx", "rx"; > > + dmas = <&edma0 1 47>, > > + <&edma0 1 46>; > > + status = "disabled"; > > + }; > > + > > + sai2: sai@2b60000 { > > + #sound-dai-cells = <0>; > > + compatible = "fsl,vf610-sai"; > > + reg = <0x0 0x2b60000 0x0 0x10000>; > > + interrupts = <0 149 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > > + <&clockgen 4 3>, <&clockgen 4 3>; > > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > > + dma-names = "tx", "rx"; > > + dmas = <&edma0 1 45>, > > + <&edma0 1 44>; > > + status = "disabled"; > > + }; > > + > > + edma0: edma@2c00000 { > > + #dma-cells = <2>; > > + compatible = "fsl,vf610-edma"; > > + reg = <0x0 0x2c00000 0x0 0x10000>, > > + <0x0 0x2c10000 0x0 0x10000>, > > + <0x0 0x2c20000 0x0 0x10000>; > > + interrupts = <0 103 IRQ_TYPE_LEVEL_LOW>, > > + <0 103 IRQ_TYPE_LEVEL_LOW>; > > + interrupt-names = "edma-tx", "edma-err"; > > + dma-channels = <32>; > > + big-endian; > > + clock-names = "dmamux0", "dmamux1"; > > + clocks = <&clockgen 4 3>, > > + <&clockgen 4 3>; > > + }; > > + > > + sata: sata@3200000 { > > + compatible = "fsl,ls1012a-ahci"; > > + reg = <0x0 0x3200000 0x0 0x10000>; > > + interrupts = <0 69 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&clockgen 4 0>; > > + }; > > + }; > > +}; > > -- > > 2.7.4 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> -----Original Message----- > From: Harninder Rai > Sent: Tuesday, November 15, 2016 12:15 PM > To: 'Shawn Guo' <shawnguo@kernel.org> > Cc: devicetree@vger.kernel.org; robh+dt@kernel.org; > mark.rutland@arm.com; oss@buserror.net; Bhaskar U > <bhaskar.upadhaya@nxp.com>; linux-arm-kernel@lists.infradead.org > Subject: RE: [PATCH] arm64: Add DTS support for FSL's LS1012A SoC > > > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > > > > It seems that the patch is not generated against mainline kernel. We > > do not have fsl-ls1046a-qds.dtb target in mainline kernel. > You already clarified in the following mail :) > > > > + > > > + reg_1p8v: regulator@0 { > > > > Drop the unit-address from node name, and name it like regulator-1p8v. > Ok. Will take care in V2 > > > > + > > > +&duart0 { > > > > Please sort labeled nodes alphabetically. > Ok Sure > > > > > + status = "okay"; > > > +}; > > > + > > > +&sai2 { > > > + status = "okay"; > > > +}; > > > > <snip> > > > + }; > > > + > > > + timer { > > > + compatible = "arm,armv8-timer"; > > > + /* Physical Secure PPI */ > > > + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, > > > + /* Physical Non-Secure PPI */ > > > + <1 14 IRQ_TYPE_LEVEL_LOW>, > > > + /* Virtual PPI */ > > > + <1 11 IRQ_TYPE_LEVEL_LOW>, > > > + /* Hypervisor PPI */ > > > + <1 10 IRQ_TYPE_LEVEL_LOW>; > > > > The following form should be easier for read. > > > > interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure > PPI */ > > <1 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non- > Secure PPI */ > > <1 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual PPI */ > > <1 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor PPI > */ > > > > > Agreed. My bad. Will correct in v2 > > > > + scfg: scfg@1570000 { > > > + compatible = "fsl,ls1012a-scfg", "syscon"; > > > + reg = <0x0 0x1570000 0x0 0x10000>; > > > + big-endian; > > > + }; > > > > Please sort these nodes with unit-address in order of the address. ok > > > > Shawn
Hi Harninder, Please add compatible string "fsl,ls1043a-ahci" to sata node because they are compatible. In this way, sata can be enabled. Regards, Yuantian > -----Original Message----- > From: linux-arm-kernel [mailto:linux-arm-kernel- > bounces@lists.infradead.org] On Behalf Of Harninder Rai > Sent: Thursday, November 10, 2016 2:12 AM > To: devicetree@vger.kernel.org; shawnguo@kernel.org; > robh+dt@kernel.org; mark.rutland@arm.com > Cc: oss@buserror.net; Harninder Rai <harninder.rai@nxp.com>; Bhaskar U > <bhaskar.upadhaya@nxp.com>; linux-arm-kernel@lists.infradead.org > Subject: [PATCH] arm64: Add DTS support for FSL's LS1012A SoC > > Add the device tree support for FSL LS1012A SoC. > Following levels of DTSI/DTS files have been created for the LS1012A > SoC family: > > - fsl-ls1012a.dtsi: > DTS-Include file for FSL LS1012A SoC. > > - fsl-ls1012a-frdm.dts: > DTS file for FSL LS1012A FRDM board. > > - fsl-ls1012a-qds.dts: > DTS file for FSL LS1012A QDS board. > > - fsl-ls1012a-rdb.dts: > DTS file for FSL LS1012A RDB board. > > Signed-off-by: Harninder Rai <harninder.rai@nxp.com> > Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 3 + > arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 115 ++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 128 +++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 59 +++++ > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 248 > +++++++++++++++++++++ > 5 files changed, 553 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile > b/arch/arm64/boot/dts/freescale/Makefile > index 6602718..39db645 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -1,3 +1,6 @@ > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git > a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > new file mode 100644 > index 0000000..1f2da79 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts > @@ -0,0 +1,115 @@ > +/* > + * Device Tree file for Freescale LS1012A Freedom Board. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY > KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR > COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE > OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include "fsl-ls1012a.dtsi" > + > +/ { > + model = "LS1012A Freedom Board"; > + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; > + > + sys_mclk: clock-mclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + }; > + > + reg_1p8v: regulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,widgets = > + "Microphone", "Microphone Jack", > + "Headphone", "Headphone Jack", > + "Speaker", "Speaker Ext", > + "Line", "Line In Jack"; > + simple-audio-card,routing = > + "MIC_IN", "Microphone Jack", > + "Microphone Jack", "Mic Bias", > + "LINE_IN", "Line In Jack", > + "Headphone Jack", "HP_OUT", > + "Speaker Ext", "LINE_OUT"; > + > + simple-audio-card,cpu { > + sound-dai = <&sai2>; > + frame-master; > + bitclock-master; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&codec>; > + frame-master; > + bitclock-master; > + system-clock-frequency = <25000000>; > + }; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + codec: sgtl5000@a { > + #sound-dai-cells = <0>; > + compatible = "fsl,sgtl5000"; > + reg = <0xa>; > + VDDA-supply = <®_1p8v>; > + VDDIO-supply = <®_1p8v>; > + clocks = <&sys_mclk>; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&sai2 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts > new file mode 100644 > index 0000000..ca680a7 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts > @@ -0,0 +1,128 @@ > +/* > + * Device Tree file for Freescale LS1012A QDS Board. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY > KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR > COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE > OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include "fsl-ls1012a.dtsi" > + > +/ { > + model = "LS1012A QDS Board"; > + compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; > + > + sys_mclk: clock-mclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + }; > + > + reg_3p3v: regulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,widgets = > + "Microphone", "Microphone Jack", > + "Headphone", "Headphone Jack", > + "Speaker", "Speaker Ext", > + "Line", "Line In Jack"; > + simple-audio-card,routing = > + "MIC_IN", "Microphone Jack", > + "Microphone Jack", "Mic Bias", > + "LINE_IN", "Line In Jack", > + "Headphone Jack", "HP_OUT", > + "Speaker Ext", "LINE_OUT"; > + > + simple-audio-card,cpu { > + sound-dai = <&sai2>; > + frame-master; > + bitclock-master; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&codec>; > + frame-master; > + bitclock-master; > + system-clock-frequency = <24576000>; > + }; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + pca9547@77 { > + compatible = "nxp,pca9547"; > + reg = <0x77>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + > + codec: sgtl5000@a { > + #sound-dai-cells = <0>; > + compatible = "fsl,sgtl5000"; > + reg = <0xa>; > + VDDA-supply = <®_3p3v>; > + VDDIO-supply = <®_3p3v>; > + clocks = <&sys_mclk>; > + }; > + }; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&sai2 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > new file mode 100644 > index 0000000..924dad6 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > @@ -0,0 +1,59 @@ > +/* > + * Device Tree file for Freescale LS1012A RDB Board. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY > KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR > COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE > OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include "fsl-ls1012a.dtsi" > + > +/ { > + model = "LS1012A RDB Board"; > + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; }; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&duart0 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > new file mode 100644 > index 0000000..0bf5b64 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi > @@ -0,0 +1,248 @@ > +/* > + * Device Tree Include file for Freescale Layerscape-1012A family SoC. > + * > + * Copyright 2016, Freescale Semiconductor > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY > KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR > COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE > OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + compatible = "fsl,ls1012a"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0>; > + clocks = <&clockgen 1 0>; > + #cooling-cells = <2>; > + }; > + }; > + > + sysclk: sysclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + clock-output-names = "sysclk"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + /* Physical Secure PPI */ > + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, > + /* Physical Non-Secure PPI */ > + <1 14 IRQ_TYPE_LEVEL_LOW>, > + /* Virtual PPI */ > + <1 11 IRQ_TYPE_LEVEL_LOW>, > + /* Hypervisor PPI */ > + <1 10 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <0 106 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + gic: interrupt-controller@1400000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ > + <0x0 0x1402000 0 0x2000>, /* GICC */ > + <0x0 0x1404000 0 0x2000>, /* GICH */ > + <0x0 0x1406000 0 0x2000>; /* GICV */ > + interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + reboot { > + compatible = "syscon-reboot"; > + regmap = <&dcfg>; > + offset = <0xb0>; > + mask = <0x02>; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clockgen: clocking@1ee1000 { > + compatible = "fsl,ls1012a-clockgen"; > + reg = <0x0 0x1ee1000 0x0 0x1000>; > + #clock-cells = <2>; > + clocks = <&sysclk>; > + }; > + > + scfg: scfg@1570000 { > + compatible = "fsl,ls1012a-scfg", "syscon"; > + reg = <0x0 0x1570000 0x0 0x10000>; > + big-endian; > + }; > + > + dcfg: dcfg@1ee0000 { > + compatible = "fsl,ls1012a-dcfg", > + "syscon"; > + reg = <0x0 0x1ee0000 0x0 0x10000>; > + big-endian; > + }; > + > + i2c0: i2c@2180000 { > + compatible = "fsl,vf610-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x2180000 0x0 0x10000>; > + interrupts = <0 56 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@2190000 { > + compatible = "fsl,vf610-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x2190000 0x0 0x10000>; > + interrupts = <0 57 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + status = "disabled"; > + }; > + > + duart0: serial@21c0500 { > + compatible = "fsl,ns16550", "ns16550a"; > + reg = <0x00 0x21c0500 0x0 0x100>; > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 0>; > + }; > + > + duart1: serial@21c0600 { > + compatible = "fsl,ns16550", "ns16550a"; > + reg = <0x00 0x21c0600 0x0 0x100>; > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 0>; > + }; > + > + gpio0: gpio@2300000 { > + compatible = "fsl,qoriq-gpio"; > + reg = <0x0 0x2300000 0x0 0x10000>; > + interrupts = <0 66 IRQ_TYPE_LEVEL_LOW>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpio1: gpio@2310000 { > + compatible = "fsl,qoriq-gpio"; > + reg = <0x0 0x2310000 0x0 0x10000>; > + interrupts = <0 67 IRQ_TYPE_LEVEL_LOW>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + wdog0: wdog@2ad0000 { > + compatible = "fsl,ls1012a-wdt", > + "fsl,imx21-wdt"; > + reg = <0x0 0x2ad0000 0x0 0x10000>; > + interrupts = <0 83 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + big-endian; > + }; > + > + sai1: sai@2b50000 { > + #sound-dai-cells = <0>; > + compatible = "fsl,vf610-sai"; > + reg = <0x0 0x2b50000 0x0 0x10000>; > + interrupts = <0 148 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > + <&clockgen 4 3>, <&clockgen 4 3>; > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + dma-names = "tx", "rx"; > + dmas = <&edma0 1 47>, > + <&edma0 1 46>; > + status = "disabled"; > + }; > + > + sai2: sai@2b60000 { > + #sound-dai-cells = <0>; > + compatible = "fsl,vf610-sai"; > + reg = <0x0 0x2b60000 0x0 0x10000>; > + interrupts = <0 149 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 3>, <&clockgen 4 3>, > + <&clockgen 4 3>, <&clockgen 4 3>; > + clock-names = "bus", "mclk1", "mclk2", "mclk3"; > + dma-names = "tx", "rx"; > + dmas = <&edma0 1 45>, > + <&edma0 1 44>; > + status = "disabled"; > + }; > + > + edma0: edma@2c00000 { > + #dma-cells = <2>; > + compatible = "fsl,vf610-edma"; > + reg = <0x0 0x2c00000 0x0 0x10000>, > + <0x0 0x2c10000 0x0 0x10000>, > + <0x0 0x2c20000 0x0 0x10000>; > + interrupts = <0 103 IRQ_TYPE_LEVEL_LOW>, > + <0 103 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "edma-tx", "edma-err"; > + dma-channels = <32>; > + big-endian; > + clock-names = "dmamux0", "dmamux1"; > + clocks = <&clockgen 4 3>, > + <&clockgen 4 3>; > + }; > + > + sata: sata@3200000 { > + compatible = "fsl,ls1012a-ahci"; > + reg = <0x0 0x3200000 0x0 0x10000>; > + interrupts = <0 69 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&clockgen 4 0>; > + }; > + }; > +}; > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6602718..39db645 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,3 +1,6 @@ +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts new file mode 100644 index 0000000..1f2da79 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -0,0 +1,115 @@ +/* + * Device Tree file for Freescale LS1012A Freedom Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A Freedom Board"; + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts new file mode 100644 index 0000000..ca680a7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -0,0 +1,128 @@ +/* + * Device Tree file for Freescale LS1012A QDS Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A QDS Board"; + compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <24576000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts new file mode 100644 index 0000000..924dad6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -0,0 +1,59 @@ +/* + * Device Tree file for Freescale LS1012A RDB Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A RDB Board"; + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; +}; + +&i2c0 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi new file mode 100644 index 0000000..0bf5b64 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -0,0 +1,248 @@ +/* + * Device Tree Include file for Freescale Layerscape-1012A family SoC. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "fsl,ls1012a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + #cooling-cells = <2>; + }; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + timer { + compatible = "arm,armv8-timer"; + /* Physical Secure PPI */ + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, + /* Physical Non-Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>, + /* Virtual PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>, + /* Hypervisor PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 106 IRQ_TYPE_LEVEL_LOW>; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ + <0x0 0x1402000 0 0x2000>, /* GICC */ + <0x0 0x1404000 0 0x2000>, /* GICH */ + <0x0 0x1406000 0 0x2000>; /* GICV */ + interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1012a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1012a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1012a-dcfg", + "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <0 56 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <0 57 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 66 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 67 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog0: wdog@2ad0000 { + compatible = "fsl,ls1012a-wdt", + "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <0 83 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 0>; + big-endian; + }; + + sai1: sai@2b50000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b50000 0x0 0x10000>; + interrupts = <0 148 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>, + <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 47>, + <&edma0 1 46>; + status = "disabled"; + }; + + sai2: sai@2b60000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b60000 0x0 0x10000>; + interrupts = <0 149 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>, + <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 45>, + <&edma0 1 44>; + status = "disabled"; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <0 103 IRQ_TYPE_LEVEL_LOW>, + <0 103 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 3>, + <&clockgen 4 3>; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1012a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clockgen 4 0>; + }; + }; +};
Add the device tree support for FSL LS1012A SoC. Following levels of DTSI/DTS files have been created for the LS1012A SoC family: - fsl-ls1012a.dtsi: DTS-Include file for FSL LS1012A SoC. - fsl-ls1012a-frdm.dts: DTS file for FSL LS1012A FRDM board. - fsl-ls1012a-qds.dts: DTS file for FSL LS1012A QDS board. - fsl-ls1012a-rdb.dts: DTS file for FSL LS1012A RDB board. Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 3 + arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 115 ++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 128 +++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 59 +++++ arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 248 +++++++++++++++++++++ 5 files changed, 553 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi