diff mbox

[08/39] Annotate hardware config module parameters in drivers/gpio/

Message ID 148059543997.31612.610019846448617763.stgit@warthog.procyon.org.uk (mailing list archive)
State New, archived
Headers show

Commit Message

David Howells Dec. 1, 2016, 12:30 p.m. UTC 
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/gpio/.

Suggested-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: William Breathitt Gray <vilhelm.gray@gmail.com>
cc: Linus Walleij <linus.walleij@linaro.org>
cc: Alexandre Courbot <gnurou@gmail.com>
cc: linux-gpio@vger.kernel.org
---

 drivers/gpio/gpio-104-dio-48e.c |    4 ++--
 drivers/gpio/gpio-104-idi-48.c  |    4 ++--
 drivers/gpio/gpio-104-idio-16.c |    4 ++--
 drivers/gpio/gpio-gpio-mm.c     |    2 +-
 drivers/gpio/gpio-ws16c48.c     |    4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

William Breathitt Gray Dec. 1, 2016, 1:49 p.m. UTC | #1 
On Thu, Dec 01, 2016 at 12:30:40PM +0000, David Howells wrote:
>When the kernel is running in secure boot mode, we lock down the kernel to
>prevent userspace from modifying the running kernel image.  Whilst this
>includes prohibiting access to things like /dev/mem, it must also prevent
>access by means of configuring driver modules in such a way as to cause a
>device to access or modify the kernel image.
>
>To this end, annotate module_param* statements that refer to hardware
>configuration and indicate for future reference what type of parameter they
>specify.  The parameter parser in the core sees this information and can
>skip such parameters with an error message if the kernel is locked down.
>The module initialisation then runs as normal, but just sees whatever the
>default values for those parameters is.
>
>Note that we do still need to do the module initialisation because some
>drivers have viable defaults set in case parameters aren't specified and
>some drivers support automatic configuration (e.g. PNP or PCI) in addition
>to manually coded parameters.
>
>This patch annotates drivers in drivers/gpio/.
>
>Suggested-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
>Signed-off-by: David Howells <dhowells@redhat.com>
>cc: William Breathitt Gray <vilhelm.gray@gmail.com>
>cc: Linus Walleij <linus.walleij@linaro.org>
>cc: Alexandre Courbot <gnurou@gmail.com>
>cc: linux-gpio@vger.kernel.org

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>

>---
>
> drivers/gpio/gpio-104-dio-48e.c |    4 ++--
> drivers/gpio/gpio-104-idi-48.c  |    4 ++--
> drivers/gpio/gpio-104-idio-16.c |    4 ++--
> drivers/gpio/gpio-gpio-mm.c     |    2 +-
> drivers/gpio/gpio-ws16c48.c     |    4 ++--
> 5 files changed, 9 insertions(+), 9 deletions(-)
>
>diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
>index fcf776971ca9..1c334eed5821 100644
>--- a/drivers/gpio/gpio-104-dio-48e.c
>+++ b/drivers/gpio/gpio-104-dio-48e.c
>@@ -33,11 +33,11 @@
> 
> static unsigned int base[MAX_NUM_DIO48E];
> static unsigned int num_dio48e;
>-module_param_array(base, uint, &num_dio48e, 0);
>+module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
> MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
> 
> static unsigned int irq[MAX_NUM_DIO48E];
>-module_param_array(irq, uint, NULL, 0);
>+module_param_hw_array(irq, uint, irq, NULL, 0);
> MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
> 
> /**
>diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
>index 2d2763ea1a68..6639920b3299 100644
>--- a/drivers/gpio/gpio-104-idi-48.c
>+++ b/drivers/gpio/gpio-104-idi-48.c
>@@ -33,11 +33,11 @@
> 
> static unsigned int base[MAX_NUM_IDI_48];
> static unsigned int num_idi_48;
>-module_param_array(base, uint, &num_idi_48, 0);
>+module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
> MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
> 
> static unsigned int irq[MAX_NUM_IDI_48];
>-module_param_array(irq, uint, NULL, 0);
>+module_param_hw_array(irq, uint, irq, NULL, 0);
> MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
> 
> /**
>diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
>index 6787b8fcf0d8..6d7024ac2689 100644
>--- a/drivers/gpio/gpio-104-idio-16.c
>+++ b/drivers/gpio/gpio-104-idio-16.c
>@@ -33,11 +33,11 @@
> 
> static unsigned int base[MAX_NUM_IDIO_16];
> static unsigned int num_idio_16;
>-module_param_array(base, uint, &num_idio_16, 0);
>+module_param_hw_array(base, uint, ioport, &num_idio_16, 0);
> MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses");
> 
> static unsigned int irq[MAX_NUM_IDIO_16];
>-module_param_array(irq, uint, NULL, 0);
>+module_param_hw_array(irq, uint, irq, NULL, 0);
> MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers");
> 
> /**
>diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
>index 1e7def9449ce..4ac2179b96ad 100644
>--- a/drivers/gpio/gpio-gpio-mm.c
>+++ b/drivers/gpio/gpio-gpio-mm.c
>@@ -31,7 +31,7 @@
> 
> static unsigned int base[MAX_NUM_GPIOMM];
> static unsigned int num_gpiomm;
>-module_param_array(base, uint, &num_gpiomm, 0);
>+module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
> MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
> 
> /**
>diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
>index eaa71d440ccf..c84d600a8bb0 100644
>--- a/drivers/gpio/gpio-ws16c48.c
>+++ b/drivers/gpio/gpio-ws16c48.c
>@@ -30,11 +30,11 @@
> 
> static unsigned int base[MAX_NUM_WS16C48];
> static unsigned int num_ws16c48;
>-module_param_array(base, uint, &num_ws16c48, 0);
>+module_param_hw_array(base, uint, ioport, &num_ws16c48, 0);
> MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses");
> 
> static unsigned int irq[MAX_NUM_WS16C48];
>-module_param_array(irq, uint, NULL, 0);
>+module_param_hw_array(irq, uint, irq, NULL, 0);
> MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers");
> 
> /**
>
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Dec. 2, 2016, 12:55 p.m. UTC | #2 
On Thu, Dec 1, 2016 at 1:30 PM, David Howells <dhowells@redhat.com> wrote:

> When the kernel is running in secure boot mode, we lock down the kernel to
> prevent userspace from modifying the running kernel image.  Whilst this
> includes prohibiting access to things like /dev/mem, it must also prevent
> access by means of configuring driver modules in such a way as to cause a
> device to access or modify the kernel image.
>
> To this end, annotate module_param* statements that refer to hardware
> configuration and indicate for future reference what type of parameter they
> specify.  The parameter parser in the core sees this information and can
> skip such parameters with an error message if the kernel is locked down.
> The module initialisation then runs as normal, but just sees whatever the
> default values for those parameters is.
>
> Note that we do still need to do the module initialisation because some
> drivers have viable defaults set in case parameters aren't specified and
> some drivers support automatic configuration (e.g. PNP or PCI) in addition
> to manually coded parameters.
>
> This patch annotates drivers in drivers/gpio/.
>
> Suggested-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
> Signed-off-by: David Howells <dhowells@redhat.com>
> cc: William Breathitt Gray <vilhelm.gray@gmail.com>
> cc: Linus Walleij <linus.walleij@linaro.org>
> cc: Alexandre Courbot <gnurou@gmail.com>
> cc: linux-gpio@vger.kernel.org

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index fcf776971ca9..1c334eed5821 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -33,11 +33,11 @@ 
 
 static unsigned int base[MAX_NUM_DIO48E];
 static unsigned int num_dio48e;
-module_param_array(base, uint, &num_dio48e, 0);
+module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
 MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
 
 static unsigned int irq[MAX_NUM_DIO48E];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
 
 /**
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index 2d2763ea1a68..6639920b3299 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -33,11 +33,11 @@ 
 
 static unsigned int base[MAX_NUM_IDI_48];
 static unsigned int num_idi_48;
-module_param_array(base, uint, &num_idi_48, 0);
+module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
 MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
 
 static unsigned int irq[MAX_NUM_IDI_48];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
 
 /**
diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
index 6787b8fcf0d8..6d7024ac2689 100644
--- a/drivers/gpio/gpio-104-idio-16.c
+++ b/drivers/gpio/gpio-104-idio-16.c
@@ -33,11 +33,11 @@ 
 
 static unsigned int base[MAX_NUM_IDIO_16];
 static unsigned int num_idio_16;
-module_param_array(base, uint, &num_idio_16, 0);
+module_param_hw_array(base, uint, ioport, &num_idio_16, 0);
 MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses");
 
 static unsigned int irq[MAX_NUM_IDIO_16];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers");
 
 /**
diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
index 1e7def9449ce..4ac2179b96ad 100644
--- a/drivers/gpio/gpio-gpio-mm.c
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -31,7 +31,7 @@ 
 
 static unsigned int base[MAX_NUM_GPIOMM];
 static unsigned int num_gpiomm;
-module_param_array(base, uint, &num_gpiomm, 0);
+module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
 MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
 
 /**
diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
index eaa71d440ccf..c84d600a8bb0 100644
--- a/drivers/gpio/gpio-ws16c48.c
+++ b/drivers/gpio/gpio-ws16c48.c
@@ -30,11 +30,11 @@ 
 
 static unsigned int base[MAX_NUM_WS16C48];
 static unsigned int num_ws16c48;
-module_param_array(base, uint, &num_ws16c48, 0);
+module_param_hw_array(base, uint, ioport, &num_ws16c48, 0);
 MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses");
 
 static unsigned int irq[MAX_NUM_WS16C48];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers");
 
 /**