| Message ID | 20161202192415.16110-1-thierry.reding@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Thierry, On 02-12-2016 19:24, Thierry Reding wrote: > From: Thierry Reding <treding@nvidia.com> > > SCDC is a mechanism defined in the HDMI 2.0 specification that allows > the source and sink devices to communicate. > > This commit introduces helpers to access the SCDC and provides the > symbolic names for the various registers defined in the specification. > > Signed-off-by: Thierry Reding <treding@nvidia.com> > --- > Changes in v2: > - indent register field definitions for readability (Ville Syrjälä) > - use GFP_TEMPORARY for temporary buffer allocation (Jani Nikula) > > Documentation/gpu/drm-kms-helpers.rst | 12 ++++ > drivers/gpu/drm/Kconfig | 4 ++ > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/drm_scdc_helper.c | 111 ++++++++++++++++++++++++++++ > include/drm/drm_scdc_helper.h | 132 ++++++++++++++++++++++++++++++++++ > 5 files changed, 260 insertions(+) > create mode 100644 drivers/gpu/drm/drm_scdc_helper.c > create mode 100644 include/drm/drm_scdc_helper.h > > diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst > index 03040aa14fe8..759275629fcf 100644 > --- a/Documentation/gpu/drm-kms-helpers.rst > +++ b/Documentation/gpu/drm-kms-helpers.rst > @@ -217,6 +217,18 @@ EDID Helper Functions Reference > .. kernel-doc:: drivers/gpu/drm/drm_edid.c > :export: > > +SCDC Helper Functions Reference > +=============================== > + > +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c > + :doc: scdc helpers > + > +.. kernel-doc:: include/drm/drm_scdc_helper.h > + :internal: > + > +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c > + :export: > + > Rectangle Utilities Reference > ============================= > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index 95fc0410e129..d0031fe45bab 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -84,6 +84,10 @@ config DRM_FBDEV_EMULATION > > If in doubt, say "Y". > > +config DRM_SCDC > + bool > + depends on DRM_KMS_HELPER > + > config DRM_LOAD_EDID_FIRMWARE > bool "Allow to specify an EDID data set instead of probing for it" > depends on DRM_KMS_HELPER > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 883f3e75cfbc..71c38b6dd546 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -31,6 +31,7 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ > drm_kms_helper_common.o drm_dp_dual_mode_helper.o \ > drm_simple_kms_helper.o drm_modeset_helper.o > > +drm_kms_helper-$(CONFIG_DRM_SCDC) += drm_scdc_helper.o > drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o > drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o > drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o > diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c > new file mode 100644 > index 000000000000..fe0e1211e873 > --- /dev/null > +++ b/drivers/gpu/drm/drm_scdc_helper.c > @@ -0,0 +1,111 @@ > +/* > + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sub license, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the > + * next paragraph) shall be included in all copies or substantial portions > + * of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER > + * DEALINGS IN THE SOFTWARE. > + */ > + > +#include <linux/slab.h> > + > +#include <drm/drm_scdc_helper.h> > + > +/** > + * DOC: scdc helpers > + * > + * Status and Control Data Channel (SCDC) is a mechanism introduced by the > + * HDMI 2.0 specification. It is a point-to-point protocol that allows the > + * HDMI source and HDMI sink to exchange data. The same I2C interface that > + * is used to access EDID serves as the transport mechanism for SCDC. > + */ > + > +#define SCDC_I2C_SLAVE_ADDRESS 0x54 > + > +/** > + * drm_scdc_read - read a block of data from SCDC > + * @adapter: I2C controller > + * @offset: start offset of block to read > + * @buffer: return location for the block to read > + * @size: size of the block to read > + * > + * Reads a block of data from SCDC, starting at a given offset. > + * > + * Returns: > + * The number of bytes read from SCDC or a negative error code on failure. > + */ > +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, > + size_t size) > +{ > + struct i2c_msg msgs[2] = { > + { > + .addr = SCDC_I2C_SLAVE_ADDRESS, > + .flags = 0, > + .len = 1, > + .buf = &offset, > + }, { > + .addr = SCDC_I2C_SLAVE_ADDRESS, > + .flags = I2C_M_RD, > + .len = size, > + .buf = buffer, > + } > + }; > + > + return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); > +} > +EXPORT_SYMBOL(drm_scdc_read); > + > +/** > + * drm_scdc_write - write a block of data to SCDC > + * @adapter: I2C controller > + * @offset: start offset of block to write > + * @buffer: block of data to write > + * @size: size of the block to write > + * > + * Writes a block of data to SCDC, starting at a given offset. > + * > + * Returns: > + * The number of bytes written to SCDC or a negative error code on failure. > + */ > +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, > + const void *buffer, size_t size) > +{ > + struct i2c_msg msg = { > + .addr = SCDC_I2C_SLAVE_ADDRESS, > + .flags = 0, > + .len = 1 + size, > + .buf = NULL, > + }; > + void *data; > + int err; > + > + data = kmalloc(1 + size, GFP_TEMPORARY); > + if (!data) > + return -ENOMEM; > + > + msg.buf = data; > + > + memcpy(data, &offset, sizeof(offset)); > + memcpy(data + 1, buffer, size); Don't you agree it would be better if you use the same scheme as drm_scdc_read()? Something like: struct i2c_msg msgs[] = { { .addr = SCDC_I2C_SLAVE_ADDRESS, .flags = 0, .len = 1, .buf = &offset, }, { .addr = SCDC_I2C_SLAVE_ADDRESS, .flags = 0, .len = size, .buf = buffer, }, }; > + > + err = i2c_transfer(adapter, &msg, 1); > + > + kfree(data); > + > + return err; > +} > +EXPORT_SYMBOL(drm_scdc_write); > diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h > new file mode 100644 > index 000000000000..93b07bcf0291 > --- /dev/null > +++ b/include/drm/drm_scdc_helper.h > @@ -0,0 +1,132 @@ > +/* > + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sub license, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the > + * next paragraph) shall be included in all copies or substantial portions > + * of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER > + * DEALINGS IN THE SOFTWARE. > + */ > + > +#ifndef DRM_SCDC_HELPER_H > +#define DRM_SCDC_HELPER_H > + > +#include <linux/i2c.h> > +#include <linux/types.h> > + > +#define SCDC_SINK_VERSION 0x01 > + > +#define SCDC_SOURCE_VERSION 0x02 > + > +#define SCDC_UPDATE_0 0x10 > +#define SCDC_READ_REQUEST_TEST (1 << 2) > +#define SCDC_CED_UPDATE (1 << 1) > +#define SCDC_STATUS_UPDATE (1 << 0) > + > +#define SCDC_UPDATE_1 0x11 > + > +#define SCDC_TMDS_CONFIG 0x20 > +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) > +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) > +#define SCDC_SCRAMBLING_ENABLE (1 << 0) > + > +#define SCDC_SCRAMBLER_STATUS 0x21 > +#define SCDC_SCRAMBLING_STATUS (1 << 0) > + > +#define SCDC_CONFIG_0 0x30 > +#define SCDC_READ_REQUEST_ENABLE (1 << 0) > + > +#define SCDC_STATUS_FLAGS_0 0x40 > +#define SCDC_CH2_LOCK (1 < 3) > +#define SCDC_CH1_LOCK (1 < 2) > +#define SCDC_CH0_LOCK (1 < 1) > +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) > +#define SCDC_CLOCK_DETECT (1 << 0) > + > +#define SCDC_STATUS_FLAGS_1 0x41 > + > +#define SCDC_ERR_DET_0_L 0x50 > +#define SCDC_ERR_DET_0_H 0x51 > +#define SCDC_ERR_DET_1_L 0x52 > +#define SCDC_ERR_DET_1_H 0x53 > +#define SCDC_ERR_DET_2_L 0x54 > +#define SCDC_ERR_DET_2_H 0x55 > +#define SCDC_CHANNEL_VALID (1 << 7) > + > +#define SCDC_ERR_DET_CHECKSUM 0x56 > + > +#define SCDC_TEST_CONFIG_0 0xc0 > +#define SCDC_TEST_READ_REQUEST (1 << 7) > +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f) > + > +#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 > +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 > + > +#define SCDC_DEVICE_ID 0xd3 > +#define SCDC_DEVICE_ID_SIZE 8 > + > +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb > +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) > +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) > + > +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc > +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd > + > +#define SCDC_MANUFACTURER_SPECIFIC 0xde > +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34 > + > +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, > + size_t size); > +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, > + const void *buffer, size_t size); > + > +/** > + * drm_scdc_readb - read a single byte from SCDC > + * @adapter: I2C adapter > + * @offset: offset of register to read > + * @value: return location for the register value > + * > + * Reads a single byte from SCDC. This is a convenience wrapper around the > + * drm_scdc_read() function. > + * > + * Returns: > + * 0 on success or a negative error code on failure. > + */ > +static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset, > + u8 *value) > +{ > + return drm_scdc_read(adapter, offset, value, sizeof(*value)); > +} > + > +/** > + * drm_scdc_writeb - write a single byte to SCDC > + * @adapter: I2C adapter > + * @offset: offset of register to read > + * @value: return location for the register value > + * > + * Writes a single byte to SCDC. This is a convenience wrapper around the > + * drm_scdc_write() function. > + * > + * Returns: > + * 0 on success or a negative error code on failure. > + */ > +static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, > + u8 value) > +{ > + return drm_scdc_write(adapter, offset, &value, sizeof(value)); > +} > + > +#endif Best regards, Jose Miguel Abreu
On Mon, Dec 05, 2016 at 10:12:39AM +0000, Jose Abreu wrote: > On 02-12-2016 19:24, Thierry Reding wrote: [...] > > +/** > > + * drm_scdc_write - write a block of data to SCDC > > + * @adapter: I2C controller > > + * @offset: start offset of block to write > > + * @buffer: block of data to write > > + * @size: size of the block to write > > + * > > + * Writes a block of data to SCDC, starting at a given offset. > > + * > > + * Returns: > > + * The number of bytes written to SCDC or a negative error code on failure. > > + */ > > +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, > > + const void *buffer, size_t size) > > +{ > > + struct i2c_msg msg = { > > + .addr = SCDC_I2C_SLAVE_ADDRESS, > > + .flags = 0, > > + .len = 1 + size, > > + .buf = NULL, > > + }; > > + void *data; > > + int err; > > + > > + data = kmalloc(1 + size, GFP_TEMPORARY); > > + if (!data) > > + return -ENOMEM; > > + > > + msg.buf = data; > > + > > + memcpy(data, &offset, sizeof(offset)); > > + memcpy(data + 1, buffer, size); > > Don't you agree it would be better if you use the same scheme as > drm_scdc_read()? Something like: > > struct i2c_msg msgs[] = { > { > .addr = SCDC_I2C_SLAVE_ADDRESS, > .flags = 0, > .len = 1, > .buf = &offset, > }, { > .addr = SCDC_I2C_SLAVE_ADDRESS, > .flags = 0, > .len = size, > .buf = buffer, > }, > }; Ville had a similar comment on a prior iteration. It looks as if the above should work, but it's probably best to test it a little more widely to make sure we're not running into cases where it breaks. Have you by any chance verified that it works on your hardware? Thierry
On Mon, Dec 05, 2016 at 12:16:52PM +0100, Thierry Reding wrote: > On Mon, Dec 05, 2016 at 10:12:39AM +0000, Jose Abreu wrote: > > On 02-12-2016 19:24, Thierry Reding wrote: > [...] > > > +/** > > > + * drm_scdc_write - write a block of data to SCDC > > > + * @adapter: I2C controller > > > + * @offset: start offset of block to write > > > + * @buffer: block of data to write > > > + * @size: size of the block to write > > > + * > > > + * Writes a block of data to SCDC, starting at a given offset. > > > + * > > > + * Returns: > > > + * The number of bytes written to SCDC or a negative error code on failure. > > > + */ > > > +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, > > > + const void *buffer, size_t size) > > > +{ > > > + struct i2c_msg msg = { > > > + .addr = SCDC_I2C_SLAVE_ADDRESS, > > > + .flags = 0, > > > + .len = 1 + size, > > > + .buf = NULL, > > > + }; > > > + void *data; > > > + int err; > > > + > > > + data = kmalloc(1 + size, GFP_TEMPORARY); > > > + if (!data) > > > + return -ENOMEM; > > > + > > > + msg.buf = data; > > > + > > > + memcpy(data, &offset, sizeof(offset)); > > > + memcpy(data + 1, buffer, size); > > > > Don't you agree it would be better if you use the same scheme as > > drm_scdc_read()? Something like: > > > > struct i2c_msg msgs[] = { > > { > > .addr = SCDC_I2C_SLAVE_ADDRESS, > > .flags = 0, > > .len = 1, > > .buf = &offset, > > }, { > > .addr = SCDC_I2C_SLAVE_ADDRESS, > > .flags = 0, > > .len = size, > > .buf = buffer, > > }, > > }; > > Ville had a similar comment on a prior iteration. It looks as if the > above should work, but it's probably best to test it a little more > widely to make sure we're not running into cases where it breaks. AFAICS the spec says we shouldn't use a repeated start for writes. I guess it might work for some devices, but going against the spec sounds questionable to me. > > Have you by any chance verified that it works on your hardware? > > Thierry
Hi, On 05-12-2016 13:31, Ville Syrjälä wrote: > On Mon, Dec 05, 2016 at 12:16:52PM +0100, Thierry Reding wrote: >> On Mon, Dec 05, 2016 at 10:12:39AM +0000, Jose Abreu wrote: >>> On 02-12-2016 19:24, Thierry Reding wrote: >> [...] >>>> +/** >>>> + * drm_scdc_write - write a block of data to SCDC >>>> + * @adapter: I2C controller >>>> + * @offset: start offset of block to write >>>> + * @buffer: block of data to write >>>> + * @size: size of the block to write >>>> + * >>>> + * Writes a block of data to SCDC, starting at a given offset. >>>> + * >>>> + * Returns: >>>> + * The number of bytes written to SCDC or a negative error code on failure. >>>> + */ >>>> +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, >>>> + const void *buffer, size_t size) >>>> +{ >>>> + struct i2c_msg msg = { >>>> + .addr = SCDC_I2C_SLAVE_ADDRESS, >>>> + .flags = 0, >>>> + .len = 1 + size, >>>> + .buf = NULL, >>>> + }; >>>> + void *data; >>>> + int err; >>>> + >>>> + data = kmalloc(1 + size, GFP_TEMPORARY); >>>> + if (!data) >>>> + return -ENOMEM; >>>> + >>>> + msg.buf = data; >>>> + >>>> + memcpy(data, &offset, sizeof(offset)); >>>> + memcpy(data + 1, buffer, size); >>> Don't you agree it would be better if you use the same scheme as >>> drm_scdc_read()? Something like: >>> >>> struct i2c_msg msgs[] = { >>> { >>> .addr = SCDC_I2C_SLAVE_ADDRESS, >>> .flags = 0, >>> .len = 1, >>> .buf = &offset, >>> }, { >>> .addr = SCDC_I2C_SLAVE_ADDRESS, >>> .flags = 0, >>> .len = size, >>> .buf = buffer, >>> }, >>> }; >> Ville had a similar comment on a prior iteration. It looks as if the >> above should work, but it's probably best to test it a little more >> widely to make sure we're not running into cases where it breaks. > AFAICS the spec says we shouldn't use a repeated start for writes. > I guess it might work for some devices, but going against the spec > sounds questionable to me. > >> Have you by any chance verified that it works on your hardware? >> >> Thierry Actually, I do not do two writes. My I2C controller is accessible through the HDMI controller and has direct mapping in the regbank of the slave address, reg address and data. I am using a I2C adapter driver but it was modified to when the slave address is SCDC and we are doing the first write then store the data and only send it in the next write. Something like this: http://lxr.free-electrons.com/source/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/anx9805.c#L43 (but modified to SCDC). Anyway, I was not remembering this so just disregard my comment. We should follow the spec as Ville said. > > Best regards, Jose Miguel Abreu
diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 03040aa14fe8..759275629fcf 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -217,6 +217,18 @@ EDID Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_edid.c :export: +SCDC Helper Functions Reference +=============================== + +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c + :doc: scdc helpers + +.. kernel-doc:: include/drm/drm_scdc_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c + :export: + Rectangle Utilities Reference ============================= diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 95fc0410e129..d0031fe45bab 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -84,6 +84,10 @@ config DRM_FBDEV_EMULATION If in doubt, say "Y". +config DRM_SCDC + bool + depends on DRM_KMS_HELPER + config DRM_LOAD_EDID_FIRMWARE bool "Allow to specify an EDID data set instead of probing for it" depends on DRM_KMS_HELPER diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 883f3e75cfbc..71c38b6dd546 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -31,6 +31,7 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_kms_helper_common.o drm_dp_dual_mode_helper.o \ drm_simple_kms_helper.o drm_modeset_helper.o +drm_kms_helper-$(CONFIG_DRM_SCDC) += drm_scdc_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c new file mode 100644 index 000000000000..fe0e1211e873 --- /dev/null +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/slab.h> + +#include <drm/drm_scdc_helper.h> + +/** + * DOC: scdc helpers + * + * Status and Control Data Channel (SCDC) is a mechanism introduced by the + * HDMI 2.0 specification. It is a point-to-point protocol that allows the + * HDMI source and HDMI sink to exchange data. The same I2C interface that + * is used to access EDID serves as the transport mechanism for SCDC. + */ + +#define SCDC_I2C_SLAVE_ADDRESS 0x54 + +/** + * drm_scdc_read - read a block of data from SCDC + * @adapter: I2C controller + * @offset: start offset of block to read + * @buffer: return location for the block to read + * @size: size of the block to read + * + * Reads a block of data from SCDC, starting at a given offset. + * + * Returns: + * The number of bytes read from SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size) +{ + struct i2c_msg msgs[2] = { + { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1, + .buf = &offset, + }, { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + } + }; + + return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); +} +EXPORT_SYMBOL(drm_scdc_read); + +/** + * drm_scdc_write - write a block of data to SCDC + * @adapter: I2C controller + * @offset: start offset of block to write + * @buffer: block of data to write + * @size: size of the block to write + * + * Writes a block of data to SCDC, starting at a given offset. + * + * Returns: + * The number of bytes written to SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size, + .buf = NULL, + }; + void *data; + int err; + + data = kmalloc(1 + size, GFP_TEMPORARY); + if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, sizeof(offset)); + memcpy(data + 1, buffer, size); + + err = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + return err; +} +EXPORT_SYMBOL(drm_scdc_write); diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h new file mode 100644 index 000000000000..93b07bcf0291 --- /dev/null +++ b/include/drm/drm_scdc_helper.h @@ -0,0 +1,132 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H + +#include <linux/i2c.h> +#include <linux/types.h> + +#define SCDC_SINK_VERSION 0x01 + +#define SCDC_SOURCE_VERSION 0x02 + +#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0) + +#define SCDC_UPDATE_1 0x11 + +#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) + +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0) + +#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0) + +#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 < 3) +#define SCDC_CH1_LOCK (1 < 2) +#define SCDC_CH0_LOCK (1 < 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) + +#define SCDC_STATUS_FLAGS_1 0x41 + +#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) + +#define SCDC_ERR_DET_CHECKSUM 0x56 + +#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f) + +#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 + +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 + +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) + +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd + +#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34 + +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size); +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size); + +/** + * drm_scdc_readb - read a single byte from SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Reads a single byte from SCDC. This is a convenience wrapper around the + * drm_scdc_read() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset, + u8 *value) +{ + return drm_scdc_read(adapter, offset, value, sizeof(*value)); +} + +/** + * drm_scdc_writeb - write a single byte to SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Writes a single byte to SCDC. This is a convenience wrapper around the + * drm_scdc_write() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, + u8 value) +{ + return drm_scdc_write(adapter, offset, &value, sizeof(value)); +} + +#endif