| Message ID | 20161207050826.23174-5-khilman@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kevin, Thank you for the patch. On Tuesday 06 Dec 2016 21:08:25 Kevin Hilman wrote: > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Kevin Hilman <khilman@baylibre.com> > --- > .../devicetree/bindings/media/ti,da850-vpif.txt | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/media/ti,da850-vpif.txt > > diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt > b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode > 100644 > index 000000000000..fa06dfdb6898 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt > @@ -0,0 +1,67 @@ > +Texas Instruments VPIF > +---------------------- > + > +The TI Video Port InterFace (VPIF) is the primary component for video > +capture and display on the DA850/AM18x family of TI DaVinci/Sitara > +SoCs. > + > +TI Document reference: SPRUH82C, Chapter 35 > +http://www.ti.com/lit/pdf/spruh82 > + > +Required properties: > +- compatible: must be "ti,da850-vpif" > +- reg: physical base address and length of the registers set for the > device; > +- interrupts: should contain IRQ line for the VPIF > + > +Video Capture: > + > +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a > +single 16-bit channel. It should contain at least one port child node > +with child 'endpoint' node. Please refer to the bindings defined in > +Documentation/devicetree/bindings/media/video-interfaces.txt. You might want to clarify how endpoints are use in the two cases. Apart from that, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > +Example using 2 8-bit input channels, one of which is connected to an > +I2C-connected TVP5147 decoder: > + > + vpif: vpif@217000 { > + compatible = "ti,da850-vpif"; > + reg = <0x217000 0x1000>; > + interrupts = <92>; > + > + port { > + vpif_ch0: endpoint@0 { > + reg = <0>; > + bus-width = <8>; > + remote-endpoint = <&composite>; > + }; > + > + vpif_ch1: endpoint@1 { > + reg = <1>; > + bus-width = <8>; > + data-shift = <8>; > + }; > + }; > + }; > + > +[ ... ] > + > +&i2c0 { > + > + tvp5147@5d { > + compatible = "ti,tvp5147"; > + reg = <0x5d>; > + status = "okay"; > + > + port { > + composite: endpoint { > + hsync-active = <1>; > + vsync-active = <1>; > + pclk-sample = <0>; > + > + /* VPIF channel 0 (lower 8-bits) */ > + remote-endpoint = <&vpif_ch0>; > + bus-width = <8>; > + }; > + }; > + }; > +};
Laurent Pinchart <laurent.pinchart@ideasonboard.com> writes: > Hi Kevin, > > Thank you for the patch. > > On Tuesday 06 Dec 2016 21:08:25 Kevin Hilman wrote: >> Acked-by: Rob Herring <robh@kernel.org> >> Signed-off-by: Kevin Hilman <khilman@baylibre.com> >> --- >> .../devicetree/bindings/media/ti,da850-vpif.txt | 67 +++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/media/ti,da850-vpif.txt >> >> diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt >> b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode >> 100644 >> index 000000000000..fa06dfdb6898 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt >> @@ -0,0 +1,67 @@ >> +Texas Instruments VPIF >> +---------------------- >> + >> +The TI Video Port InterFace (VPIF) is the primary component for video >> +capture and display on the DA850/AM18x family of TI DaVinci/Sitara >> +SoCs. >> + >> +TI Document reference: SPRUH82C, Chapter 35 >> +http://www.ti.com/lit/pdf/spruh82 >> + >> +Required properties: >> +- compatible: must be "ti,da850-vpif" >> +- reg: physical base address and length of the registers set for the >> device; >> +- interrupts: should contain IRQ line for the VPIF >> + >> +Video Capture: >> + >> +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a >> +single 16-bit channel. It should contain at least one port child node >> +with child 'endpoint' node. Please refer to the bindings defined in >> +Documentation/devicetree/bindings/media/video-interfaces.txt. > > You might want to clarify how endpoints are use in the two cases. Apart from > that, OK, I'll add another example for the 16-bit case. Something like... >> +Example using 2 8-bit input channels, one of which is connected to an >> +I2C-connected TVP5147 decoder: >> + >> + vpif: vpif@217000 { >> + compatible = "ti,da850-vpif"; >> + reg = <0x217000 0x1000>; >> + interrupts = <92>; >> + >> + port { >> + vpif_ch0: endpoint@0 { >> + reg = <0>; >> + bus-width = <8>; >> + remote-endpoint = <&composite>; >> + }; >> + >> + vpif_ch1: endpoint@1 { >> + reg = <1>; >> + bus-width = <8>; >> + data-shift = <8>; >> + }; >> + }; >> + }; >> + >> +[ ... ] >> + >> +&i2c0 { >> + >> + tvp5147@5d { >> + compatible = "ti,tvp5147"; >> + reg = <0x5d>; >> + status = "okay"; >> + >> + port { >> + composite: endpoint { >> + hsync-active = <1>; >> + vsync-active = <1>; >> + pclk-sample = <0>; >> + >> + /* VPIF channel 0 (lower 8-bits) */ >> + remote-endpoint = <&vpif_ch0>; >> + bus-width = <8>; >> + }; >> + }; >> + }; >> +}; ...this, at the end of the binding doc: Alternatively, an example when the bus is configured as a single 16-bit input (e.g. for raw-capture mode): vpif: vpif@217000 { compatible = "ti,da850-vpif"; reg = <0x217000 0x1000>; interrupts = <92>; port { vpif_ch0: endpoint { bus-width = <16>; }; }; }; Thanks for the review, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode 100644 index 000000000000..fa06dfdb6898 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt @@ -0,0 +1,67 @@ +Texas Instruments VPIF +---------------------- + +The TI Video Port InterFace (VPIF) is the primary component for video +capture and display on the DA850/AM18x family of TI DaVinci/Sitara +SoCs. + +TI Document reference: SPRUH82C, Chapter 35 +http://www.ti.com/lit/pdf/spruh82 + +Required properties: +- compatible: must be "ti,da850-vpif" +- reg: physical base address and length of the registers set for the device; +- interrupts: should contain IRQ line for the VPIF + +Video Capture: + +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a +single 16-bit channel. It should contain at least one port child node +with child 'endpoint' node. Please refer to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example using 2 8-bit input channels, one of which is connected to an +I2C-connected TVP5147 decoder: + + vpif: vpif@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + remote-endpoint = <&composite>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; + }; + +[ ... ] + +&i2c0 { + + tvp5147@5d { + compatible = "ti,tvp5147"; + reg = <0x5d>; + status = "okay"; + + port { + composite: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + + /* VPIF channel 0 (lower 8-bits) */ + remote-endpoint = <&vpif_ch0>; + bus-width = <8>; + }; + }; + }; +};