Message ID | 20161208184909.23321-6-Anna.Schumaker@Netapp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Dec 08, 2016 at 01:49:08PM -0500, Anna Schumaker wrote: > This test passes invalid argumnt combinations to the copy_file_range() > system call to test that input is verified before attempting to copy. > > Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> > --- > tests/generic/396 | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/generic/396.out | 8 ++++++ > tests/generic/group | 1 + > 3 files changed, 77 insertions(+) > create mode 100644 tests/generic/396 > create mode 100644 tests/generic/396.out > > diff --git a/tests/generic/396 b/tests/generic/396 > new file mode 100644 > index 0000000..c262070 > --- /dev/null > +++ b/tests/generic/396 > @@ -0,0 +1,68 @@ > +#!/bin/bash > +# FS QA Test No. 396 > +# > +# Tests vfs_copy_file_range() error checking > +#----------------------------------------------------------------------- > +# Copyright (c) 2016 Netapp, Inc. All rights reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -rf $tmp.* > +} > + > +# get standard environment > +. common/rc > +. common/filter > + > +# real QA test starts here > +_supported_fs generic > +_supported_os Linux > + > +_require_xfs_io_command "copy_range" > +_require_test > + > +testdir=$TEST_DIR/test-$seq > +rm -rf $testdir > +mkdir $testdir > +rm -f $seqres.full > + > +echo "Create the original file" > +$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 1000' $testdir/file >> $seqres.full 2>&1 > + > +echo "source pos > source size:" > +$XFS_IO_PROG -f -c "copy_range -s 1000 -l 100 $testdir/file" "$testdir/copy" > + > +echo "target read-only" > +$XFS_IO_PROG -r -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" > + > +echo "target append-only" > +$XFS_IO_PROG -a -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" Good start, though I can think of a few more things... Copying when one or the other file arguments are directories/device files/etc., copies where pos < size but (pos + len) > size, copies where pos + len overflow, overlapped src/dest ranges, and perhaps even copies across holes and unwritten extents? --D > + > +#success, all done > +status=0 > +exit > diff --git a/tests/generic/396.out b/tests/generic/396.out > new file mode 100644 > index 0000000..4031883 > --- /dev/null > +++ b/tests/generic/396.out > @@ -0,0 +1,8 @@ > +QA output created by 396 > +Create the original file > +source pos > source size: > +copy_range: Invalid argument > +target read-only > +copy_range: Bad file descriptor > +target append-only > +copy_range: Bad file descriptor > diff --git a/tests/generic/group b/tests/generic/group > index 2b50ddb..eee0f39 100644 > --- a/tests/generic/group > +++ b/tests/generic/group > @@ -398,3 +398,4 @@ > 393 auto quick copy > 394 auto quick copy > 395 auto quick copy > +396 auto quick copy > -- > 2.10.2 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/08/2016 03:20 PM, Darrick J. Wong wrote: > On Thu, Dec 08, 2016 at 01:49:08PM -0500, Anna Schumaker wrote: >> This test passes invalid argumnt combinations to the copy_file_range() >> system call to test that input is verified before attempting to copy. >> >> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> >> --- >> tests/generic/396 | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++ >> tests/generic/396.out | 8 ++++++ >> tests/generic/group | 1 + >> 3 files changed, 77 insertions(+) >> create mode 100644 tests/generic/396 >> create mode 100644 tests/generic/396.out >> >> diff --git a/tests/generic/396 b/tests/generic/396 >> new file mode 100644 >> index 0000000..c262070 >> --- /dev/null >> +++ b/tests/generic/396 >> @@ -0,0 +1,68 @@ >> +#!/bin/bash >> +# FS QA Test No. 396 >> +# >> +# Tests vfs_copy_file_range() error checking >> +#----------------------------------------------------------------------- >> +# Copyright (c) 2016 Netapp, Inc. All rights reserved. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#----------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + cd / >> + rm -rf $tmp.* >> +} >> + >> +# get standard environment >> +. common/rc >> +. common/filter >> + >> +# real QA test starts here >> +_supported_fs generic >> +_supported_os Linux >> + >> +_require_xfs_io_command "copy_range" >> +_require_test >> + >> +testdir=$TEST_DIR/test-$seq >> +rm -rf $testdir >> +mkdir $testdir >> +rm -f $seqres.full >> + >> +echo "Create the original file" >> +$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 1000' $testdir/file >> $seqres.full 2>&1 >> + >> +echo "source pos > source size:" >> +$XFS_IO_PROG -f -c "copy_range -s 1000 -l 100 $testdir/file" "$testdir/copy" >> + >> +echo "target read-only" >> +$XFS_IO_PROG -r -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" >> + >> +echo "target append-only" >> +$XFS_IO_PROG -a -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" > > Good start, though I can think of a few more things... Thanks! > > Copying when one or the other file arguments are directories/device files/etc., Good suggestion, I didn't even think of that one. > copies where pos < size but (pos + len) > size, This is in the first patch as the "Copy beyond end of original file" test > copies where pos + len > overflow, overlapped src/dest ranges, and perhaps even copies across holes and > unwritten extents? These are also good suggestions. I'll add them in! Anna > > --D > >> + >> +#success, all done >> +status=0 >> +exit >> diff --git a/tests/generic/396.out b/tests/generic/396.out >> new file mode 100644 >> index 0000000..4031883 >> --- /dev/null >> +++ b/tests/generic/396.out >> @@ -0,0 +1,8 @@ >> +QA output created by 396 >> +Create the original file >> +source pos > source size: >> +copy_range: Invalid argument >> +target read-only >> +copy_range: Bad file descriptor >> +target append-only >> +copy_range: Bad file descriptor >> diff --git a/tests/generic/group b/tests/generic/group >> index 2b50ddb..eee0f39 100644 >> --- a/tests/generic/group >> +++ b/tests/generic/group >> @@ -398,3 +398,4 @@ >> 393 auto quick copy >> 394 auto quick copy >> 395 auto quick copy >> +396 auto quick copy >> -- >> 2.10.2 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe fstests" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/generic/396 b/tests/generic/396 new file mode 100644 index 0000000..c262070 --- /dev/null +++ b/tests/generic/396 @@ -0,0 +1,68 @@ +#!/bin/bash +# FS QA Test No. 396 +# +# Tests vfs_copy_file_range() error checking +#----------------------------------------------------------------------- +# Copyright (c) 2016 Netapp, Inc. All rights reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment +. common/rc +. common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux + +_require_xfs_io_command "copy_range" +_require_test + +testdir=$TEST_DIR/test-$seq +rm -rf $testdir +mkdir $testdir +rm -f $seqres.full + +echo "Create the original file" +$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 1000' $testdir/file >> $seqres.full 2>&1 + +echo "source pos > source size:" +$XFS_IO_PROG -f -c "copy_range -s 1000 -l 100 $testdir/file" "$testdir/copy" + +echo "target read-only" +$XFS_IO_PROG -r -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" + +echo "target append-only" +$XFS_IO_PROG -a -f -c "copy_range -s 0 -l 100 $testdir/file" "$testdir/copy" + +#success, all done +status=0 +exit diff --git a/tests/generic/396.out b/tests/generic/396.out new file mode 100644 index 0000000..4031883 --- /dev/null +++ b/tests/generic/396.out @@ -0,0 +1,8 @@ +QA output created by 396 +Create the original file +source pos > source size: +copy_range: Invalid argument +target read-only +copy_range: Bad file descriptor +target append-only +copy_range: Bad file descriptor diff --git a/tests/generic/group b/tests/generic/group index 2b50ddb..eee0f39 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -398,3 +398,4 @@ 393 auto quick copy 394 auto quick copy 395 auto quick copy +396 auto quick copy
This test passes invalid argumnt combinations to the copy_file_range() system call to test that input is verified before attempting to copy. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> --- tests/generic/396 | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/396.out | 8 ++++++ tests/generic/group | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/generic/396 create mode 100644 tests/generic/396.out