@@ -25,6 +25,8 @@ Optional properties :
- ti,external-control : Indicates that the charger is configured externally
and that the host should not attempt to enable/disable charging or set the
charge voltage/current.
+ - ti,poll-interval-ms : In case there is no interrupts specified, poll AC
+ presense on the ti,ac-detect-gpios GPIO with this interval.
Example:
@@ -50,6 +50,8 @@ struct bq24735 {
struct bq24735_platform *pdata;
struct mutex lock;
struct gpio_desc *status_gpio;
+ struct delayed_work poll;
+ u32 poll_interval;
bool charging;
};
@@ -209,11 +211,8 @@ static int bq24735_charger_is_charging(struct bq24735 *charger)
return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
}
-static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+static void bq24735_update(struct bq24735 *charger)
{
- struct power_supply *psy = devid;
- struct bq24735 *charger = to_bq24735(psy);
-
mutex_lock(&charger->lock);
if (charger->charging && bq24735_charger_is_present(charger))
@@ -223,11 +222,29 @@ static irqreturn_t bq24735_charger_isr(int irq, void *devid)
mutex_unlock(&charger->lock);
- power_supply_changed(psy);
+ power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+ struct power_supply *psy = devid;
+ struct bq24735 *charger = to_bq24735(psy);
+
+ bq24735_update(charger);
return IRQ_HANDLED;
}
+static void bq24735_poll(struct work_struct *work)
+{
+ struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+ bq24735_update(charger);
+
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
+}
+
static int bq24735_charger_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -455,11 +472,33 @@ static int bq24735_charger_probe(struct i2c_client *client,
client->irq, ret);
return ret;
}
+ } else if (charger->status_gpio) {
+ ret = of_property_read_u32(client->dev.of_node,
+ "ti,poll-interval-ms",
+ &charger->poll_interval);
+ if (ret)
+ return 0;
+ if (!charger->poll_interval)
+ return 0;
+
+ INIT_DELAYED_WORK(&charger->poll, bq24735_poll);
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
}
return 0;
}
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+ struct bq24735 *charger = i2c_get_clientdata(client);
+
+ if (charger->poll_interval)
+ cancel_delayed_work_sync(&charger->poll);
+
+ return 0;
+}
+
static const struct i2c_device_id bq24735_charger_id[] = {
{ "bq24735-charger", 0 },
{}
@@ -478,6 +517,7 @@ static struct i2c_driver bq24735_charger_driver = {
.of_match_table = bq24735_match_ids,
},
.probe = bq24735_charger_probe,
+ .remove = bq24735_charger_remove,
.id_table = bq24735_charger_id,
};
If the ac-detect gpio does not support interrupts, provide a fallback to poll the gpio at a configurable interval. Signed-off-by: Peter Rosin <peda@axentia.se> --- .../bindings/power/supply/ti,bq24735.txt | 2 + drivers/power/supply/bq24735-charger.c | 50 +++++++++++++++++++--- 2 files changed, 47 insertions(+), 5 deletions(-)