Message ID | 20161206202304.GA6884@jordon-HP-15-Notebook-PC (mailing list archive) |
---|---|
State | Rejected, archived |
Headers | show |
On Wed, Dec 7, 2016 at 1:53 AM, Souptick Joarder <jrdr.linux@gmail.com> wrote: > We should use dma_pool_zalloc instead of dma_pool_alloc/memset > > Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> > --- > drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c > index c291fdf..f2edfd7 100644 > --- a/drivers/scsi/qla4xxx/ql4_mbx.c > +++ b/drivers/scsi/qla4xxx/ql4_mbx.c > @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password, > struct ql4_chap_table *chap_table; > dma_addr_t chap_dma; > > - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); > + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); > if (chap_table == NULL) > return -ENOMEM; > > chap_size = sizeof(struct ql4_chap_table); > - memset(chap_table, 0, chap_size); > > if (is_qla40XX(ha)) > offset = FLASH_CHAP_OFFSET | (idx * chap_size); > -- > 1.9.1 > Any comment on this patch? -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/12/16, 10:16 AM, "linux-scsi-owner@vger.kernel.org on behalf of Souptick Joarder" <linux-scsi-owner@vger.kernel.org on behalf of jrdr.linux@gmail.com> wrote: >On Wed, Dec 7, 2016 at 1:53 AM, Souptick Joarder <jrdr.linux@gmail.com> >wrote: >> We should use dma_pool_zalloc instead of dma_pool_alloc/memset >> >> Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> >> --- >> drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- >> 1 file changed, 1 insertion(+), 2 deletions(-) >> >> diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c >>b/drivers/scsi/qla4xxx/ql4_mbx.c >> index c291fdf..f2edfd7 100644 >> --- a/drivers/scsi/qla4xxx/ql4_mbx.c >> +++ b/drivers/scsi/qla4xxx/ql4_mbx.c >> @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, >>char *username, char *password, >> struct ql4_chap_table *chap_table; >> dma_addr_t chap_dma; >> >> - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, >>&chap_dma); >> + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, >>&chap_dma); >> if (chap_table == NULL) >> return -ENOMEM; >> >> chap_size = sizeof(struct ql4_chap_table); >> - memset(chap_table, 0, chap_size); >> >> if (is_qla40XX(ha)) >> offset = FLASH_CHAP_OFFSET | (idx * chap_size); >> -- >> 1.9.1 >> > >Any comment on this patch? There are multiple other places where dma_pool_alloc needs to be replaced by dma_pool_zalloc. Can you please take care within a single patch. Thanks, Nilesh -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 13, 2016 at 4:11 PM, Javali, Nilesh <Nilesh.Javali@cavium.com> wrote: > > > On 12/12/16, 10:16 AM, "linux-scsi-owner@vger.kernel.org on behalf of > Souptick Joarder" <linux-scsi-owner@vger.kernel.org on behalf of > jrdr.linux@gmail.com> wrote: > >>On Wed, Dec 7, 2016 at 1:53 AM, Souptick Joarder <jrdr.linux@gmail.com> >>wrote: >>> We should use dma_pool_zalloc instead of dma_pool_alloc/memset >>> >>> Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> >>> --- >>> drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- >>> 1 file changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c >>>b/drivers/scsi/qla4xxx/ql4_mbx.c >>> index c291fdf..f2edfd7 100644 >>> --- a/drivers/scsi/qla4xxx/ql4_mbx.c >>> +++ b/drivers/scsi/qla4xxx/ql4_mbx.c >>> @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, >>>char *username, char *password, >>> struct ql4_chap_table *chap_table; >>> dma_addr_t chap_dma; >>> >>> - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, >>>&chap_dma); >>> + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, >>>&chap_dma); >>> if (chap_table == NULL) >>> return -ENOMEM; >>> >>> chap_size = sizeof(struct ql4_chap_table); >>> - memset(chap_table, 0, chap_size); >>> >>> if (is_qla40XX(ha)) >>> offset = FLASH_CHAP_OFFSET | (idx * chap_size); >>> -- >>> 1.9.1 >>> >> >>Any comment on this patch? > > There are multiple other places where dma_pool_alloc needs to be replaced > by dma_pool_zalloc. are you asking to do this for SCSI subsystem? If yes, I can do that. > > Can you please take care within a single patch. But the same changes are applicable in other subsystems as well. I think I shouldn't send those changes in a single patch as maintainers are different for different modules. > > Thanks, > Nilesh > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 13/12/16, 6:35 PM, "Souptick Joarder" <jrdr.linux@gmail.com> wrote: >On Tue, Dec 13, 2016 at 4:11 PM, Javali, Nilesh ><Nilesh.Javali@cavium.com> wrote: >> >> >> On 12/12/16, 10:16 AM, "linux-scsi-owner@vger.kernel.org on behalf of >> Souptick Joarder" <linux-scsi-owner@vger.kernel.org on behalf of >> jrdr.linux@gmail.com> wrote: >> >>>On Wed, Dec 7, 2016 at 1:53 AM, Souptick Joarder <jrdr.linux@gmail.com> >>>wrote: >>>> We should use dma_pool_zalloc instead of dma_pool_alloc/memset >>>> >>>> Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> >>>> --- >>>> drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- >>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>> >>>> diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c >>>>b/drivers/scsi/qla4xxx/ql4_mbx.c >>>> index c291fdf..f2edfd7 100644 >>>> --- a/drivers/scsi/qla4xxx/ql4_mbx.c >>>> +++ b/drivers/scsi/qla4xxx/ql4_mbx.c >>>> @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, >>>>char *username, char *password, >>>> struct ql4_chap_table *chap_table; >>>> dma_addr_t chap_dma; >>>> >>>> - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, >>>>&chap_dma); >>>> + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, >>>>&chap_dma); >>>> if (chap_table == NULL) >>>> return -ENOMEM; >>>> >>>> chap_size = sizeof(struct ql4_chap_table); >>>> - memset(chap_table, 0, chap_size); >>>> >>>> if (is_qla40XX(ha)) >>>> offset = FLASH_CHAP_OFFSET | (idx * chap_size); >>>> -- >>>> 1.9.1 >>>> >>> >>>Any comment on this patch? >> >> There are multiple other places where dma_pool_alloc needs to be >>replaced >> by dma_pool_zalloc. > > > are you asking to do this for SCSI subsystem? > If yes, I can do that. > >> >> Can you please take care within a single patch. > > But the same changes are applicable in other subsystems as well. > I think I shouldn't send those changes in a single patch as >maintainers are different > for different modules. I'm referring to multiple other files within qla4xxx source which uses dma_pool_alloc. The current patch takes care only of ql4_mbx.c and qla4xxx_get_chap function. There is qla4xxx_set_chap function as well. Also ql4_init.c and ql4_os.c files also use dma_pool_alloc. I was requesting to make all these changes related to qla4xxx module within a single patch. Thanks, Nilesh -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 21, 2016 at 5:13 PM, Javali, Nilesh <Nilesh.Javali@cavium.com> wrote: > > > On 13/12/16, 6:35 PM, "Souptick Joarder" <jrdr.linux@gmail.com> wrote: > >>On Tue, Dec 13, 2016 at 4:11 PM, Javali, Nilesh >><Nilesh.Javali@cavium.com> wrote: >>> >>> >>> On 12/12/16, 10:16 AM, "linux-scsi-owner@vger.kernel.org on behalf of >>> Souptick Joarder" <linux-scsi-owner@vger.kernel.org on behalf of >>> jrdr.linux@gmail.com> wrote: >>> >>>>On Wed, Dec 7, 2016 at 1:53 AM, Souptick Joarder <jrdr.linux@gmail.com> >>>>wrote: >>>>> We should use dma_pool_zalloc instead of dma_pool_alloc/memset >>>>> >>>>> Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> >>>>> --- >>>>> drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- >>>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>>> >>>>> diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c >>>>>b/drivers/scsi/qla4xxx/ql4_mbx.c >>>>> index c291fdf..f2edfd7 100644 >>>>> --- a/drivers/scsi/qla4xxx/ql4_mbx.c >>>>> +++ b/drivers/scsi/qla4xxx/ql4_mbx.c >>>>> @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, >>>>>char *username, char *password, >>>>> struct ql4_chap_table *chap_table; >>>>> dma_addr_t chap_dma; >>>>> >>>>> - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, >>>>>&chap_dma); >>>>> + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, >>>>>&chap_dma); >>>>> if (chap_table == NULL) >>>>> return -ENOMEM; >>>>> >>>>> chap_size = sizeof(struct ql4_chap_table); >>>>> - memset(chap_table, 0, chap_size); >>>>> >>>>> if (is_qla40XX(ha)) >>>>> offset = FLASH_CHAP_OFFSET | (idx * chap_size); >>>>> -- >>>>> 1.9.1 >>>>> >>>> >>>>Any comment on this patch? >>> >>> There are multiple other places where dma_pool_alloc needs to be >>>replaced >>> by dma_pool_zalloc. >> >> >> are you asking to do this for SCSI subsystem? >> If yes, I can do that. >> >>> >>> Can you please take care within a single patch. >> >> But the same changes are applicable in other subsystems as well. >> I think I shouldn't send those changes in a single patch as >>maintainers are different >> for different modules. > > I'm referring to multiple other files within qla4xxx source which uses > dma_pool_alloc. > The current patch takes care only of ql4_mbx.c and qla4xxx_get_chap > function. > There is qla4xxx_set_chap function as well. Also ql4_init.c and ql4_os.c > files also use dma_pool_alloc. > I was requesting to make all these changes related to qla4xxx module > within a single patch. Well I will do that. > > Thanks, > Nilesh > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c291fdf..f2edfd7 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1587,12 +1587,11 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password, struct ql4_chap_table *chap_table; dma_addr_t chap_dma; - chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); + chap_table = dma_pool_zalloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); if (chap_table == NULL) return -ENOMEM; chap_size = sizeof(struct ql4_chap_table); - memset(chap_table, 0, chap_size); if (is_qla40XX(ha)) offset = FLASH_CHAP_OFFSET | (idx * chap_size);
We should use dma_pool_zalloc instead of dma_pool_alloc/memset Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> --- drivers/scsi/qla4xxx/ql4_mbx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html