Message ID | 20161226054442.23599-3-matt@ranostay.consulting (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Sun, Dec 25, 2016 at 09:44:41PM -0800, Matt Ranostay wrote: > Signed-off-by: Matt Ranostay <matt@ranostay.consulting> > --- > .../devicetree/bindings/power/bq27425.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/bq27425.txt > > diff --git a/Documentation/devicetree/bindings/power/bq27425.txt b/Documentation/devicetree/bindings/power/bq27425.txt > new file mode 100644 > index 000000000000..f09f787a9378 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/bq27425.txt > @@ -0,0 +1,25 @@ > +* TI BQ27425 Fuel Gauge > + > +http://www.ti.com/lit/ds/symlink/bq27425-g2a.pdf > + > +Please note that if any of the optional properties are defined > +then all settings must be. > + > +Required properties: > +- compatible: Should be "ti,bq27425" > +- reg: integer, i2c of the device s/i2c/I2C address/ > + > +Optional properties: > +- ti,design-capacity: integer of mAh of the battery > +- ti,design-energy: integer of the mWh of the battery > +- ti,terminate-voltage: integer of mV of the dead voltage of > + the battery These all need unit suffixes. mAh and mWh may need to be added to property-units.txt. > + > +bq27425 { > + compatible = "ti,bq27425"; > + reg = <0x55>; > + > + ti,design-capacity = <1360>; > + ti,design-energy = <4970>; > + ti,terminate-voltage = <3200>; > +}; > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 3, 2017 at 8:47 AM, Rob Herring <robh@kernel.org> wrote: > On Sun, Dec 25, 2016 at 09:44:41PM -0800, Matt Ranostay wrote: >> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> >> --- >> .../devicetree/bindings/power/bq27425.txt | 25 ++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/power/bq27425.txt >> >> diff --git a/Documentation/devicetree/bindings/power/bq27425.txt b/Documentation/devicetree/bindings/power/bq27425.txt >> new file mode 100644 >> index 000000000000..f09f787a9378 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/power/bq27425.txt >> @@ -0,0 +1,25 @@ >> +* TI BQ27425 Fuel Gauge >> + >> +http://www.ti.com/lit/ds/symlink/bq27425-g2a.pdf >> + >> +Please note that if any of the optional properties are defined >> +then all settings must be. >> + >> +Required properties: >> +- compatible: Should be "ti,bq27425" >> +- reg: integer, i2c of the device > > s/i2c/I2C address/ > >> + >> +Optional properties: >> +- ti,design-capacity: integer of mAh of the battery >> +- ti,design-energy: integer of the mWh of the battery >> +- ti,terminate-voltage: integer of mV of the dead voltage of >> + the battery > > These all need unit suffixes. mAh and mWh may need to be added to > property-units.txt. Ok makes sense. > >> + >> +bq27425 { >> + compatible = "ti,bq27425"; >> + reg = <0x55>; >> + >> + ti,design-capacity = <1360>; >> + ti,design-energy = <4970>; >> + ti,terminate-voltage = <3200>; >> +}; >> -- >> 2.7.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/bq27425.txt b/Documentation/devicetree/bindings/power/bq27425.txt new file mode 100644 index 000000000000..f09f787a9378 --- /dev/null +++ b/Documentation/devicetree/bindings/power/bq27425.txt @@ -0,0 +1,25 @@ +* TI BQ27425 Fuel Gauge + +http://www.ti.com/lit/ds/symlink/bq27425-g2a.pdf + +Please note that if any of the optional properties are defined +then all settings must be. + +Required properties: +- compatible: Should be "ti,bq27425" +- reg: integer, i2c of the device + +Optional properties: +- ti,design-capacity: integer of mAh of the battery +- ti,design-energy: integer of the mWh of the battery +- ti,terminate-voltage: integer of mV of the dead voltage of + the battery + +bq27425 { + compatible = "ti,bq27425"; + reg = <0x55>; + + ti,design-capacity = <1360>; + ti,design-energy = <4970>; + ti,terminate-voltage = <3200>; +};
Signed-off-by: Matt Ranostay <matt@ranostay.consulting> --- .../devicetree/bindings/power/bq27425.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/bq27425.txt