| Message ID | 20170104123435.30740-3-jh80.chung@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, Jan 04, 2017 at 09:34:32PM +0900, Jaehoon Chung wrote: > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. I have troubles understanding this. Please, work on the commit message. For the code itself: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> ... but commit message is really important to understand why/what was done. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, January 4, 2017 7:35 AM, Jaehoon Chung wrote: > > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jingoo Han <jingoohan1@gmail.com> Best regards, Jingoo Han > --- > Changelog on V2: > - Not include the codes relevant to pci-exynos. > - Remove the getting child node. > > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-pcie.c | 280 > ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 290 insertions(+) > create mode 100644 drivers/phy/phy-exynos-pcie.c > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/05/2017 02:52 AM, Krzysztof Kozlowski wrote: > On Wed, Jan 04, 2017 at 09:34:32PM +0900, Jaehoon Chung wrote: >> This patch supports to use Generic Phy framework for Exynos PCIe phy. >> When Exynos that supported the pcie want to use the PCIe, >> it needs to control the phy resgister. >> But it should be more complex to control in their own PCIe device drivers. >> >> Currently, there is an exynos5440 case to support the pcie. >> So this driver is based on Exynos5440 PCIe. >> In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > I have troubles understanding this. Please, work on the commit message. > > For the code itself: > Acked-by: Krzysztof Kozlowski <krzk@kernel.org> > ... but commit message is really important to understand why/what was > done. Will update the commit-msg. Thanks for comments. Best Regards, Jaehoon Chung > > Best regards, > Krzysztof > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jaehoon, On Wednesday 04 January 2017 06:04 PM, Jaehoon Chung wrote: > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > Changelog on V2: > - Not include the codes relevant to pci-exynos. > - Remove the getting child node. > Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Thanks, Pankaj Dubey -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 01/04/2017 06:04 PM, Jaehoon Chung wrote: > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > Changelog on V2: > - Not include the codes relevant to pci-exynos. > - Remove the getting child node. > > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 290 insertions(+) > create mode 100644 drivers/phy/phy-exynos-pcie.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index e8eb7f2..2dddef4 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD > This driver provides PHY interface for USB 3.0 DRD controller > present on Exynos5 SoC series. > > +config PHY_EXYNOS_PCIE > + bool "Exynos PCIe PHY driver" > + depends on ARCH_EXYNOS && OF Please add a depends on COMPILE_TEST as well. Apart from this looks ok. > + depends on PCI_EXYNOS > + select GENERIC_PHY > + help > + Enable PCIe PHY support for Exynos SoC series. > + This driver provides PHY interface for Exynos PCIe controller. > + > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 65eb2f4..081aeb4 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o > diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c > new file mode 100644 > index 0000000..b57f49b > --- /dev/null > +++ b/drivers/phy/phy-exynos-pcie.c > @@ -0,0 +1,280 @@ > +/* > + * Samsung EXYNOS SoC series PCIe PHY driver > + * > + * Phy provider for PCIe controller on Exynos SoC series > + * > + * Copyright (C) 2016 Samsung Electronics Co., Ltd. > + * Jaehoon Chung <jh80.chung@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > + > +/* PCIe Purple registers */ > +#define PCIE_PHY_GLOBAL_RESET 0x000 > +#define PCIE_PHY_COMMON_RESET 0x004 > +#define PCIE_PHY_CMN_REG 0x008 > +#define PCIE_PHY_MAC_RESET 0x00c > +#define PCIE_PHY_PLL_LOCKED 0x010 > +#define PCIE_PHY_TRSVREG_RESET 0x020 > +#define PCIE_PHY_TRSV_RESET 0x024 > + > +/* PCIe PHY registers */ > +#define PCIE_PHY_IMPEDANCE 0x004 > +#define PCIE_PHY_PLL_DIV_0 0x008 > +#define PCIE_PHY_PLL_BIAS 0x00c > +#define PCIE_PHY_DCC_FEEDBACK 0x014 > +#define PCIE_PHY_PLL_DIV_1 0x05c > +#define PCIE_PHY_COMMON_POWER 0x064 > +#define PCIE_PHY_COMMON_PD_CMN BIT(3) > +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 > +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 > +#define PCIE_PHY_TRSV0_RXCDR 0x0ac > +#define PCIE_PHY_TRSV0_POWER 0x0c4 > +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV0_LVCC 0x0dc > +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 > +#define PCIE_PHY_TRSV1_RXCDR 0x16c > +#define PCIE_PHY_TRSV1_POWER 0x184 > +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV1_LVCC 0x19c > +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 > +#define PCIE_PHY_TRSV2_RXCDR 0x22c > +#define PCIE_PHY_TRSV2_POWER 0x244 > +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV2_LVCC 0x25c > +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 > +#define PCIE_PHY_TRSV3_RXCDR 0x2ec > +#define PCIE_PHY_TRSV3_POWER 0x304 > +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV3_LVCC 0x31c > + > +struct exynos_pcie_phy_data { > + struct phy_ops *ops; > +}; > + > +/* For Exynos pcie phy */ > +struct exynos_pcie_phy { > + const struct exynos_pcie_phy_data *drv_data; > + void __iomem *phy_base; > + void __iomem *blk_base; /* For exynos5440 */ > +}; > + > +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) > +{ > + writel(val, base + offset); > +} > + > +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) > +{ > + return readl(base + offset); > +} > + > +/* For Exynos5440 specific functions */ > +static int exynos5440_pcie_phy_init(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + /* DCC feedback control off */ > + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); > + > + /* set TX/RX impedance */ > + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); > + > + /* set 50Mhz PHY clock */ > + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); > + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); > + > + /* set TX Differential output for lane 0 */ > + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); > + > + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ > + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); > + > + /* set RX clock and data recovery bandwidth */ > + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); > + > + /* change TX Pre-emphasis Level Control for lanes */ > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); > + > + /* set LVCC */ > + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); > + > + /* pulse for common reset */ > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); > + udelay(500); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_on(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val &= ~PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val &= ~PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val &= ~PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val &= ~PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val &= ~PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_off(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + while (exynos_pcie_phy_readl(ep->phy_base, > + PCIE_PHY_PLL_LOCKED) == 0) { > + val = exynos_pcie_phy_readl(ep->blk_base, > + PCIE_PHY_PLL_LOCKED); > + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); > + } > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val |= PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val |= PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val |= PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val |= PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val |= PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_reset(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); > + > + return 0; > +} > + > +static struct phy_ops exynos5440_phy_ops = { > + .init = exynos5440_pcie_phy_init, > + .power_on = exynos5440_pcie_phy_power_on, > + .power_off = exynos5440_pcie_phy_power_off, > + .reset = exynos5440_pcie_phy_reset, > +}; > + > +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { > + .ops = &exynos5440_phy_ops, > +}; > + > +static const struct of_device_id exynos_pcie_phy_match[] = { > + { > + .compatible = "samsung,exynos5440-pcie-phy", > + .data = &exynos5440_pcie_phy_data, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); > + > +static int exynos_pcie_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct exynos_pcie_phy *exynos_phy; > + struct phy *generic_phy; > + struct phy_provider *phy_provider; > + struct resource *res; > + const struct exynos_pcie_phy_data *drv_data; > + > + drv_data = of_device_get_match_data(dev); > + if (!drv_data) > + return -ENODEV; > + > + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); > + if (!exynos_phy) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + exynos_phy->phy_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + exynos_phy->blk_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + exynos_phy->drv_data = drv_data; > + > + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); > + if (IS_ERR(generic_phy)) { > + dev_err(dev, "failed to create PHY\n"); > + return PTR_ERR(generic_phy); > + } > + > + phy_set_drvdata(generic_phy, exynos_phy); > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static struct platform_driver exynos_pcie_phy_driver = { > + .probe = exynos_pcie_phy_probe, > + .driver = { > + .of_match_table = exynos_pcie_phy_match, > + .name = "exynos_pcie_phy", > + } > +}; > +module_platform_driver(exynos_pcie_phy_driver); > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jaehoon, On 01/04/2017 06:04 PM, Jaehoon Chung wrote: > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > Changelog on V2: > - Not include the codes relevant to pci-exynos. > - Remove the getting child node. > > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 290 insertions(+) > create mode 100644 drivers/phy/phy-exynos-pcie.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index e8eb7f2..2dddef4 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD > This driver provides PHY interface for USB 3.0 DRD controller > present on Exynos5 SoC series. > > +config PHY_EXYNOS_PCIE > + bool "Exynos PCIe PHY driver" > + depends on ARCH_EXYNOS && OF > + depends on PCI_EXYNOS > + select GENERIC_PHY > + help > + Enable PCIe PHY support for Exynos SoC series. > + This driver provides PHY interface for Exynos PCIe controller. > + > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 65eb2f4..081aeb4 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o > diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c > new file mode 100644 > index 0000000..b57f49b > --- /dev/null > +++ b/drivers/phy/phy-exynos-pcie.c > @@ -0,0 +1,280 @@ > +/* > + * Samsung EXYNOS SoC series PCIe PHY driver > + * > + * Phy provider for PCIe controller on Exynos SoC series > + * > + * Copyright (C) 2016 Samsung Electronics Co., Ltd. > + * Jaehoon Chung <jh80.chung@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > + > +/* PCIe Purple registers */ > +#define PCIE_PHY_GLOBAL_RESET 0x000 > +#define PCIE_PHY_COMMON_RESET 0x004 > +#define PCIE_PHY_CMN_REG 0x008 > +#define PCIE_PHY_MAC_RESET 0x00c > +#define PCIE_PHY_PLL_LOCKED 0x010 > +#define PCIE_PHY_TRSVREG_RESET 0x020 > +#define PCIE_PHY_TRSV_RESET 0x024 > + > +/* PCIe PHY registers */ > +#define PCIE_PHY_IMPEDANCE 0x004 > +#define PCIE_PHY_PLL_DIV_0 0x008 > +#define PCIE_PHY_PLL_BIAS 0x00c > +#define PCIE_PHY_DCC_FEEDBACK 0x014 > +#define PCIE_PHY_PLL_DIV_1 0x05c > +#define PCIE_PHY_COMMON_POWER 0x064 > +#define PCIE_PHY_COMMON_PD_CMN BIT(3) > +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 > +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 > +#define PCIE_PHY_TRSV0_RXCDR 0x0ac > +#define PCIE_PHY_TRSV0_POWER 0x0c4 > +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV0_LVCC 0x0dc > +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 > +#define PCIE_PHY_TRSV1_RXCDR 0x16c > +#define PCIE_PHY_TRSV1_POWER 0x184 > +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV1_LVCC 0x19c > +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 > +#define PCIE_PHY_TRSV2_RXCDR 0x22c > +#define PCIE_PHY_TRSV2_POWER 0x244 > +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV2_LVCC 0x25c > +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 > +#define PCIE_PHY_TRSV3_RXCDR 0x2ec > +#define PCIE_PHY_TRSV3_POWER 0x304 > +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV3_LVCC 0x31c > + > +struct exynos_pcie_phy_data { > + struct phy_ops *ops; > +}; > + > +/* For Exynos pcie phy */ > +struct exynos_pcie_phy { > + const struct exynos_pcie_phy_data *drv_data; > + void __iomem *phy_base; > + void __iomem *blk_base; /* For exynos5440 */ > +}; > + > +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) > +{ > + writel(val, base + offset); > +} > + > +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) > +{ > + return readl(base + offset); > +} > + > +/* For Exynos5440 specific functions */ > +static int exynos5440_pcie_phy_init(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + /* DCC feedback control off */ > + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); > + > + /* set TX/RX impedance */ > + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); > + > + /* set 50Mhz PHY clock */ > + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); > + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); > + > + /* set TX Differential output for lane 0 */ > + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); > + > + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ > + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); > + > + /* set RX clock and data recovery bandwidth */ > + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); > + > + /* change TX Pre-emphasis Level Control for lanes */ > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); > + > + /* set LVCC */ > + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); > + > + /* pulse for common reset */ > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); > + udelay(500); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_on(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val &= ~PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val &= ~PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val &= ~PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val &= ~PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val &= ~PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_off(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + while (exynos_pcie_phy_readl(ep->phy_base, > + PCIE_PHY_PLL_LOCKED) == 0) { No timeout for this ? Is it possible that the PLL was never locked and this ends up in infinite loop. Please use a readl_poll_timeout() instead. > + val = exynos_pcie_phy_readl(ep->blk_base, > + PCIE_PHY_PLL_LOCKED); it is possible that the while condition check above is true (the register reads to 0), but this assignment makes ' val = 1' ? If that the case then debug message below can be misleading. > + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); Possibly, you don't want to fill up the console with these logs until the PLL is locked. dev_dbg() ? > + } > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val |= PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val |= PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val |= PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val |= PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val |= PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_reset(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); > + > + return 0; > +} > + > +static struct phy_ops exynos5440_phy_ops = { const ? > + .init = exynos5440_pcie_phy_init, > + .power_on = exynos5440_pcie_phy_power_on, > + .power_off = exynos5440_pcie_phy_power_off, > + .reset = exynos5440_pcie_phy_reset, > +}; > + > +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { > + .ops = &exynos5440_phy_ops, > +}; > + > +static const struct of_device_id exynos_pcie_phy_match[] = { > + { > + .compatible = "samsung,exynos5440-pcie-phy", > + .data = &exynos5440_pcie_phy_data, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); > + > +static int exynos_pcie_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct exynos_pcie_phy *exynos_phy; > + struct phy *generic_phy; > + struct phy_provider *phy_provider; > + struct resource *res; > + const struct exynos_pcie_phy_data *drv_data; > + > + drv_data = of_device_get_match_data(dev); > + if (!drv_data) > + return -ENODEV; > + > + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); > + if (!exynos_phy) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + exynos_phy->phy_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + exynos_phy->blk_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + exynos_phy->drv_data = drv_data; > + > + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); > + if (IS_ERR(generic_phy)) { > + dev_err(dev, "failed to create PHY\n"); > + return PTR_ERR(generic_phy); > + } > + > + phy_set_drvdata(generic_phy, exynos_phy); > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static struct platform_driver exynos_pcie_phy_driver = { > + .probe = exynos_pcie_phy_probe, > + .driver = { > + .of_match_table = exynos_pcie_phy_match, > + .name = "exynos_pcie_phy", > + } > +}; > +module_platform_driver(exynos_pcie_phy_driver); MODULE_LICENSE("GPL") ?? MODULE_DESCRIPTION() as well. Regards Vivek
Hi Vivek, On 01/10/2017 03:07 PM, Vivek Gautam wrote: > Hi Jaehoon, > > > On 01/04/2017 06:04 PM, Jaehoon Chung wrote: >> This patch supports to use Generic Phy framework for Exynos PCIe phy. >> When Exynos that supported the pcie want to use the PCIe, >> it needs to control the phy resgister. >> But it should be more complex to control in their own PCIe device drivers. >> >> Currently, there is an exynos5440 case to support the pcie. >> So this driver is based on Exynos5440 PCIe. >> In future, will support the Other exynos SoCs likes exynos5433, exynos7. >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> --- >> Changelog on V2: >> - Not include the codes relevant to pci-exynos. >> - Remove the getting child node. >> >> drivers/phy/Kconfig | 9 ++ >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 290 insertions(+) >> create mode 100644 drivers/phy/phy-exynos-pcie.c >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index e8eb7f2..2dddef4 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD >> This driver provides PHY interface for USB 3.0 DRD controller >> present on Exynos5 SoC series. >> +config PHY_EXYNOS_PCIE >> + bool "Exynos PCIe PHY driver" >> + depends on ARCH_EXYNOS && OF >> + depends on PCI_EXYNOS >> + select GENERIC_PHY >> + help >> + Enable PCIe PHY support for Exynos SoC series. >> + This driver provides PHY interface for Exynos PCIe controller. >> + >> config PHY_PISTACHIO_USB >> tristate "IMG Pistachio USB2.0 PHY driver" >> depends on MACH_PISTACHIO >> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile >> index 65eb2f4..081aeb4 100644 >> --- a/drivers/phy/Makefile >> +++ b/drivers/phy/Makefile >> @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o >> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o >> phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o >> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o >> +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o >> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o >> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o >> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c >> new file mode 100644 >> index 0000000..b57f49b >> --- /dev/null >> +++ b/drivers/phy/phy-exynos-pcie.c >> @@ -0,0 +1,280 @@ >> +/* >> + * Samsung EXYNOS SoC series PCIe PHY driver >> + * >> + * Phy provider for PCIe controller on Exynos SoC series >> + * >> + * Copyright (C) 2016 Samsung Electronics Co., Ltd. >> + * Jaehoon Chung <jh80.chung@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/io.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/of_platform.h> >> +#include <linux/platform_device.h> >> +#include <linux/phy/phy.h> >> +#include <linux/regmap.h> >> + >> +/* PCIe Purple registers */ >> +#define PCIE_PHY_GLOBAL_RESET 0x000 >> +#define PCIE_PHY_COMMON_RESET 0x004 >> +#define PCIE_PHY_CMN_REG 0x008 >> +#define PCIE_PHY_MAC_RESET 0x00c >> +#define PCIE_PHY_PLL_LOCKED 0x010 >> +#define PCIE_PHY_TRSVREG_RESET 0x020 >> +#define PCIE_PHY_TRSV_RESET 0x024 >> + >> +/* PCIe PHY registers */ >> +#define PCIE_PHY_IMPEDANCE 0x004 >> +#define PCIE_PHY_PLL_DIV_0 0x008 >> +#define PCIE_PHY_PLL_BIAS 0x00c >> +#define PCIE_PHY_DCC_FEEDBACK 0x014 >> +#define PCIE_PHY_PLL_DIV_1 0x05c >> +#define PCIE_PHY_COMMON_POWER 0x064 >> +#define PCIE_PHY_COMMON_PD_CMN BIT(3) >> +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 >> +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 >> +#define PCIE_PHY_TRSV0_RXCDR 0x0ac >> +#define PCIE_PHY_TRSV0_POWER 0x0c4 >> +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV0_LVCC 0x0dc >> +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 >> +#define PCIE_PHY_TRSV1_RXCDR 0x16c >> +#define PCIE_PHY_TRSV1_POWER 0x184 >> +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV1_LVCC 0x19c >> +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 >> +#define PCIE_PHY_TRSV2_RXCDR 0x22c >> +#define PCIE_PHY_TRSV2_POWER 0x244 >> +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV2_LVCC 0x25c >> +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 >> +#define PCIE_PHY_TRSV3_RXCDR 0x2ec >> +#define PCIE_PHY_TRSV3_POWER 0x304 >> +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV3_LVCC 0x31c >> + >> +struct exynos_pcie_phy_data { >> + struct phy_ops *ops; >> +}; >> + >> +/* For Exynos pcie phy */ >> +struct exynos_pcie_phy { >> + const struct exynos_pcie_phy_data *drv_data; >> + void __iomem *phy_base; >> + void __iomem *blk_base; /* For exynos5440 */ >> +}; >> + >> +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) >> +{ >> + writel(val, base + offset); >> +} >> + >> +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) >> +{ >> + return readl(base + offset); >> +} >> + >> +/* For Exynos5440 specific functions */ >> +static int exynos5440_pcie_phy_init(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + >> + /* DCC feedback control off */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); >> + >> + /* set TX/RX impedance */ >> + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); >> + >> + /* set 50Mhz PHY clock */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); >> + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); >> + >> + /* set TX Differential output for lane 0 */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); >> + >> + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); >> + >> + /* set RX clock and data recovery bandwidth */ >> + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); >> + >> + /* change TX Pre-emphasis Level Control for lanes */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); >> + >> + /* set LVCC */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); >> + >> + /* pulse for common reset */ >> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); >> + udelay(500); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_power_on(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + u32 val; >> + >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); >> + val &= ~PCIE_PHY_COMMON_PD_CMN; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); >> + val &= ~PCIE_PHY_TRSV0_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); >> + val &= ~PCIE_PHY_TRSV1_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); >> + val &= ~PCIE_PHY_TRSV2_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); >> + val &= ~PCIE_PHY_TRSV3_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_power_off(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + u32 val; >> + >> + while (exynos_pcie_phy_readl(ep->phy_base, >> + PCIE_PHY_PLL_LOCKED) == 0) { > > No timeout for this ? Is it possible that the PLL was never locked > and this ends up in infinite loop. > > Please use a readl_poll_timeout() instead. Ok, will fix. > >> + val = exynos_pcie_phy_readl(ep->blk_base, >> + PCIE_PHY_PLL_LOCKED); > it is possible that the while condition check above is true (the register reads to 0), > but this assignment makes ' val = 1' ? > If that the case then debug message below can be misleading. > >> + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); > > Possibly, you don't want to fill up the console with these logs until the PLL is locked. dev_dbg() ? Ok, will fix. > >> + } >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); >> + val |= PCIE_PHY_COMMON_PD_CMN; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); >> + val |= PCIE_PHY_TRSV0_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); >> + val |= PCIE_PHY_TRSV1_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); >> + val |= PCIE_PHY_TRSV2_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); >> + val |= PCIE_PHY_TRSV3_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_reset(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); >> + >> + return 0; >> +} >> + >> +static struct phy_ops exynos5440_phy_ops = { > > const ? Right. > >> + .init = exynos5440_pcie_phy_init, >> + .power_on = exynos5440_pcie_phy_power_on, >> + .power_off = exynos5440_pcie_phy_power_off, >> + .reset = exynos5440_pcie_phy_reset, >> +}; >> + >> +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { >> + .ops = &exynos5440_phy_ops, >> +}; >> + >> +static const struct of_device_id exynos_pcie_phy_match[] = { >> + { >> + .compatible = "samsung,exynos5440-pcie-phy", >> + .data = &exynos5440_pcie_phy_data, >> + }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); >> + >> +static int exynos_pcie_phy_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct exynos_pcie_phy *exynos_phy; >> + struct phy *generic_phy; >> + struct phy_provider *phy_provider; >> + struct resource *res; >> + const struct exynos_pcie_phy_data *drv_data; >> + >> + drv_data = of_device_get_match_data(dev); >> + if (!drv_data) >> + return -ENODEV; >> + >> + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); >> + if (!exynos_phy) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + exynos_phy->phy_base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(exynos_phy->phy_base)) >> + return PTR_ERR(exynos_phy->phy_base); >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); >> + exynos_phy->blk_base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(exynos_phy->phy_base)) >> + return PTR_ERR(exynos_phy->phy_base); >> + >> + exynos_phy->drv_data = drv_data; >> + >> + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); >> + if (IS_ERR(generic_phy)) { >> + dev_err(dev, "failed to create PHY\n"); >> + return PTR_ERR(generic_phy); >> + } >> + >> + phy_set_drvdata(generic_phy, exynos_phy); >> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); >> + >> + return PTR_ERR_OR_ZERO(phy_provider); >> +} >> + >> +static struct platform_driver exynos_pcie_phy_driver = { >> + .probe = exynos_pcie_phy_probe, >> + .driver = { >> + .of_match_table = exynos_pcie_phy_match, >> + .name = "exynos_pcie_phy", >> + } >> +}; >> +module_platform_driver(exynos_pcie_phy_driver); > > MODULE_LICENSE("GPL") ?? > MODULE_DESCRIPTION() as well. Will do. I will send the Patch V3 within this week. Best Regards, Jaehoon Chung > > > Regards > Vivek > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday 04 January 2017 06:04 PM, Jaehoon Chung wrote: > This patch supports to use Generic Phy framework for Exynos PCIe phy. > When Exynos that supported the pcie want to use the PCIe, > it needs to control the phy resgister. > But it should be more complex to control in their own PCIe device drivers. > > Currently, there is an exynos5440 case to support the pcie. > So this driver is based on Exynos5440 PCIe. > In future, will support the Other exynos SoCs likes exynos5433, exynos7. please re-write the commit message. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > Changelog on V2: > - Not include the codes relevant to pci-exynos. > - Remove the getting child node. > > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 290 insertions(+) > create mode 100644 drivers/phy/phy-exynos-pcie.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index e8eb7f2..2dddef4 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD > This driver provides PHY interface for USB 3.0 DRD controller > present on Exynos5 SoC series. > > +config PHY_EXYNOS_PCIE > + bool "Exynos PCIe PHY driver" > + depends on ARCH_EXYNOS && OF include COMPILE_TEST > + depends on PCI_EXYNOS PCI_EXYNOS should depend on PHY_EXYNOS_PCIE if at all required. Or else do away with this dependency. > + select GENERIC_PHY > + help > + Enable PCIe PHY support for Exynos SoC series. > + This driver provides PHY interface for Exynos PCIe controller. > + > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 65eb2f4..081aeb4 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o > diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c > new file mode 100644 > index 0000000..b57f49b > --- /dev/null > +++ b/drivers/phy/phy-exynos-pcie.c > @@ -0,0 +1,280 @@ > +/* > + * Samsung EXYNOS SoC series PCIe PHY driver > + * > + * Phy provider for PCIe controller on Exynos SoC series > + * > + * Copyright (C) 2016 Samsung Electronics Co., Ltd. 2017? > + * Jaehoon Chung <jh80.chung@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > + > +/* PCIe Purple registers */ > +#define PCIE_PHY_GLOBAL_RESET 0x000 > +#define PCIE_PHY_COMMON_RESET 0x004 > +#define PCIE_PHY_CMN_REG 0x008 > +#define PCIE_PHY_MAC_RESET 0x00c > +#define PCIE_PHY_PLL_LOCKED 0x010 > +#define PCIE_PHY_TRSVREG_RESET 0x020 > +#define PCIE_PHY_TRSV_RESET 0x024 Please use BIT() macro for bit definitions. > + > +/* PCIe PHY registers */ > +#define PCIE_PHY_IMPEDANCE 0x004 > +#define PCIE_PHY_PLL_DIV_0 0x008 > +#define PCIE_PHY_PLL_BIAS 0x00c > +#define PCIE_PHY_DCC_FEEDBACK 0x014 > +#define PCIE_PHY_PLL_DIV_1 0x05c > +#define PCIE_PHY_COMMON_POWER 0x064 > +#define PCIE_PHY_COMMON_PD_CMN BIT(3) > +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 > +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 > +#define PCIE_PHY_TRSV0_RXCDR 0x0ac > +#define PCIE_PHY_TRSV0_POWER 0x0c4 > +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV0_LVCC 0x0dc > +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 > +#define PCIE_PHY_TRSV1_RXCDR 0x16c > +#define PCIE_PHY_TRSV1_POWER 0x184 > +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV1_LVCC 0x19c > +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 > +#define PCIE_PHY_TRSV2_RXCDR 0x22c > +#define PCIE_PHY_TRSV2_POWER 0x244 > +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV2_LVCC 0x25c > +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 > +#define PCIE_PHY_TRSV3_RXCDR 0x2ec > +#define PCIE_PHY_TRSV3_POWER 0x304 > +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) > +#define PCIE_PHY_TRSV3_LVCC 0x31c > + > +struct exynos_pcie_phy_data { > + struct phy_ops *ops; > +}; > + > +/* For Exynos pcie phy */ > +struct exynos_pcie_phy { > + const struct exynos_pcie_phy_data *drv_data; > + void __iomem *phy_base; > + void __iomem *blk_base; /* For exynos5440 */ > +}; > + > +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) > +{ > + writel(val, base + offset); > +} > + > +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) > +{ > + return readl(base + offset); > +} > + > +/* For Exynos5440 specific functions */ > +static int exynos5440_pcie_phy_init(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + /* DCC feedback control off */ > + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); > + > + /* set TX/RX impedance */ > + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); > + > + /* set 50Mhz PHY clock */ > + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); > + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); > + > + /* set TX Differential output for lane 0 */ > + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); > + > + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ > + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); > + > + /* set RX clock and data recovery bandwidth */ > + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); > + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); > + > + /* change TX Pre-emphasis Level Control for lanes */ > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); > + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); > + > + /* set LVCC */ > + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); > + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); I'm starting to dis-like all this hard-coded hw params. All this should come from dt. Define a dt binding like this for all hw params.. phy,tx-differential = <val, reg-offset, mask> and have one API in phy-core to do all these settings. > + > + /* pulse for common reset */ > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); > + udelay(500); how did you get this delay value? Adding a comment might help. > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_on(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val &= ~PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val &= ~PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val &= ~PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val &= ~PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val &= ~PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_power_off(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + u32 val; > + > + while (exynos_pcie_phy_readl(ep->phy_base, > + PCIE_PHY_PLL_LOCKED) == 0) { > + val = exynos_pcie_phy_readl(ep->blk_base, > + PCIE_PHY_PLL_LOCKED); > + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); > + } > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); > + val |= PCIE_PHY_COMMON_PD_CMN; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); > + val |= PCIE_PHY_TRSV0_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); > + val |= PCIE_PHY_TRSV1_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); > + val |= PCIE_PHY_TRSV2_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); > + > + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); > + val |= PCIE_PHY_TRSV3_PD_TSV; > + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); > + > + return 0; > +} > + > +static int exynos5440_pcie_phy_reset(struct phy *phy) > +{ > + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); > + > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); > + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); > + > + return 0; > +} > + > +static struct phy_ops exynos5440_phy_ops = { > + .init = exynos5440_pcie_phy_init, > + .power_on = exynos5440_pcie_phy_power_on, > + .power_off = exynos5440_pcie_phy_power_off, > + .reset = exynos5440_pcie_phy_reset, add .owner > +}; > + > +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { > + .ops = &exynos5440_phy_ops, why do you need a wrapper for phy_ops? > +}; > + > +static const struct of_device_id exynos_pcie_phy_match[] = { > + { > + .compatible = "samsung,exynos5440-pcie-phy", > + .data = &exynos5440_pcie_phy_data, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); > + > +static int exynos_pcie_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct exynos_pcie_phy *exynos_phy; > + struct phy *generic_phy; > + struct phy_provider *phy_provider; > + struct resource *res; > + const struct exynos_pcie_phy_data *drv_data; > + > + drv_data = of_device_get_match_data(dev); > + if (!drv_data) > + return -ENODEV; > + > + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); > + if (!exynos_phy) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + exynos_phy->phy_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + exynos_phy->blk_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(exynos_phy->phy_base)) > + return PTR_ERR(exynos_phy->phy_base); > + > + exynos_phy->drv_data = drv_data; > + > + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); > + if (IS_ERR(generic_phy)) { > + dev_err(dev, "failed to create PHY\n"); > + return PTR_ERR(generic_phy); > + } > + > + phy_set_drvdata(generic_phy, exynos_phy); > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static struct platform_driver exynos_pcie_phy_driver = { > + .probe = exynos_pcie_phy_probe, > + .driver = { > + .of_match_table = exynos_pcie_phy_match, > + .name = "exynos_pcie_phy", > + } > +}; > +module_platform_driver(exynos_pcie_phy_driver); > Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 01/16/2017 05:37 PM, Kishon Vijay Abraham I wrote: > Hi, > > On Wednesday 04 January 2017 06:04 PM, Jaehoon Chung wrote: >> This patch supports to use Generic Phy framework for Exynos PCIe phy. >> When Exynos that supported the pcie want to use the PCIe, >> it needs to control the phy resgister. >> But it should be more complex to control in their own PCIe device drivers. >> >> Currently, there is an exynos5440 case to support the pcie. >> So this driver is based on Exynos5440 PCIe. >> In future, will support the Other exynos SoCs likes exynos5433, exynos7. > > please re-write the commit message. Will update the commit-message >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> --- >> Changelog on V2: >> - Not include the codes relevant to pci-exynos. >> - Remove the getting child node. >> >> drivers/phy/Kconfig | 9 ++ >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 290 insertions(+) >> create mode 100644 drivers/phy/phy-exynos-pcie.c >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index e8eb7f2..2dddef4 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD >> This driver provides PHY interface for USB 3.0 DRD controller >> present on Exynos5 SoC series. >> >> +config PHY_EXYNOS_PCIE >> + bool "Exynos PCIe PHY driver" >> + depends on ARCH_EXYNOS && OF > > include COMPILE_TEST Ok. >> + depends on PCI_EXYNOS > > PCI_EXYNOS should depend on PHY_EXYNOS_PCIE if at all required. Or else do away > with this dependency. Ok. >> + select GENERIC_PHY >> + help >> + Enable PCIe PHY support for Exynos SoC series. >> + This driver provides PHY interface for Exynos PCIe controller. >> + >> config PHY_PISTACHIO_USB >> tristate "IMG Pistachio USB2.0 PHY driver" >> depends on MACH_PISTACHIO >> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile >> index 65eb2f4..081aeb4 100644 >> --- a/drivers/phy/Makefile >> +++ b/drivers/phy/Makefile >> @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o >> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o >> phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o >> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o >> +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o >> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o >> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o >> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c >> new file mode 100644 >> index 0000000..b57f49b >> --- /dev/null >> +++ b/drivers/phy/phy-exynos-pcie.c >> @@ -0,0 +1,280 @@ >> +/* >> + * Samsung EXYNOS SoC series PCIe PHY driver >> + * >> + * Phy provider for PCIe controller on Exynos SoC series >> + * >> + * Copyright (C) 2016 Samsung Electronics Co., Ltd. > > 2017? When i had posted the first version, it was 2016.. :) >> + * Jaehoon Chung <jh80.chung@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/io.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/of_platform.h> >> +#include <linux/platform_device.h> >> +#include <linux/phy/phy.h> >> +#include <linux/regmap.h> >> + >> +/* PCIe Purple registers */ >> +#define PCIE_PHY_GLOBAL_RESET 0x000 >> +#define PCIE_PHY_COMMON_RESET 0x004 >> +#define PCIE_PHY_CMN_REG 0x008 >> +#define PCIE_PHY_MAC_RESET 0x00c >> +#define PCIE_PHY_PLL_LOCKED 0x010 >> +#define PCIE_PHY_TRSVREG_RESET 0x020 >> +#define PCIE_PHY_TRSV_RESET 0x024 > > Please use BIT() macro for bit definitions. Ok. >> + >> +/* PCIe PHY registers */ >> +#define PCIE_PHY_IMPEDANCE 0x004 >> +#define PCIE_PHY_PLL_DIV_0 0x008 >> +#define PCIE_PHY_PLL_BIAS 0x00c >> +#define PCIE_PHY_DCC_FEEDBACK 0x014 >> +#define PCIE_PHY_PLL_DIV_1 0x05c >> +#define PCIE_PHY_COMMON_POWER 0x064 >> +#define PCIE_PHY_COMMON_PD_CMN BIT(3) >> +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 >> +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 >> +#define PCIE_PHY_TRSV0_RXCDR 0x0ac >> +#define PCIE_PHY_TRSV0_POWER 0x0c4 >> +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV0_LVCC 0x0dc >> +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 >> +#define PCIE_PHY_TRSV1_RXCDR 0x16c >> +#define PCIE_PHY_TRSV1_POWER 0x184 >> +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV1_LVCC 0x19c >> +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 >> +#define PCIE_PHY_TRSV2_RXCDR 0x22c >> +#define PCIE_PHY_TRSV2_POWER 0x244 >> +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV2_LVCC 0x25c >> +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 >> +#define PCIE_PHY_TRSV3_RXCDR 0x2ec >> +#define PCIE_PHY_TRSV3_POWER 0x304 >> +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) >> +#define PCIE_PHY_TRSV3_LVCC 0x31c >> + >> +struct exynos_pcie_phy_data { >> + struct phy_ops *ops; >> +}; >> + >> +/* For Exynos pcie phy */ >> +struct exynos_pcie_phy { >> + const struct exynos_pcie_phy_data *drv_data; >> + void __iomem *phy_base; >> + void __iomem *blk_base; /* For exynos5440 */ >> +}; >> + >> +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) >> +{ >> + writel(val, base + offset); >> +} >> + >> +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) >> +{ >> + return readl(base + offset); >> +} >> + >> +/* For Exynos5440 specific functions */ >> +static int exynos5440_pcie_phy_init(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + >> + /* DCC feedback control off */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); >> + >> + /* set TX/RX impedance */ >> + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); >> + >> + /* set 50Mhz PHY clock */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); >> + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); >> + >> + /* set TX Differential output for lane 0 */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); >> + >> + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); >> + >> + /* set RX clock and data recovery bandwidth */ >> + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); >> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); >> + >> + /* change TX Pre-emphasis Level Control for lanes */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); >> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); >> + >> + /* set LVCC */ >> + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); >> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); > > I'm starting to dis-like all this hard-coded hw params. All this should come > from dt. Define a dt binding like this for all hw params.. > phy,tx-differential = <val, reg-offset, mask> > > and have one API in phy-core to do all these settings. Will check. >> + >> + /* pulse for common reset */ >> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); >> + udelay(500); > > how did you get this delay value? Adding a comment might help. Well..Actually i don't know why udelay(500) was defined. When i had started the refactoring pci-exynos, there was one problem.. I didn't have Exynos5440 TRM and information..i can't check anything for exyno5440. (I don't know who is using EXYNOS5440 pci.) the entire codes are just moved from pci-exynos.c. When i want to upstream exynos5433 pcie, first step is the cleaning pci-exynos.c relevant to exynos5440. It was too complex to support the other Exynos SoCs. Otherwise, it needs to add the new file for exynos5433. >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_power_on(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + u32 val; >> + >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); >> + val &= ~PCIE_PHY_COMMON_PD_CMN; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); >> + val &= ~PCIE_PHY_TRSV0_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); >> + val &= ~PCIE_PHY_TRSV1_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); >> + val &= ~PCIE_PHY_TRSV2_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); >> + val &= ~PCIE_PHY_TRSV3_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_power_off(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + u32 val; >> + >> + while (exynos_pcie_phy_readl(ep->phy_base, >> + PCIE_PHY_PLL_LOCKED) == 0) { >> + val = exynos_pcie_phy_readl(ep->blk_base, >> + PCIE_PHY_PLL_LOCKED); >> + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); >> + } >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); >> + val |= PCIE_PHY_COMMON_PD_CMN; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); >> + val |= PCIE_PHY_TRSV0_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); >> + val |= PCIE_PHY_TRSV1_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); >> + val |= PCIE_PHY_TRSV2_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); >> + >> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); >> + val |= PCIE_PHY_TRSV3_PD_TSV; >> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); >> + >> + return 0; >> +} >> + >> +static int exynos5440_pcie_phy_reset(struct phy *phy) >> +{ >> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); >> + >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); >> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); >> + >> + return 0; >> +} >> + >> +static struct phy_ops exynos5440_phy_ops = { >> + .init = exynos5440_pcie_phy_init, >> + .power_on = exynos5440_pcie_phy_power_on, >> + .power_off = exynos5440_pcie_phy_power_off, >> + .reset = exynos5440_pcie_phy_reset, > > add .owner Will fix. >> +}; >> + >> +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { >> + .ops = &exynos5440_phy_ops, > > why do you need a wrapper for phy_ops? My main goal is the upstreaming exynos5433 pci, not exynos5440. There are many different with exynos5440 and exynos5433. As i know, only exynos5440 has the big different with other Exynos variants. I think i can be removed in this patch. When i upstream the other SoCs, I will use the wrapper. Best Regards, Jaehoon Chung >> +}; >> + >> +static const struct of_device_id exynos_pcie_phy_match[] = { >> + { >> + .compatible = "samsung,exynos5440-pcie-phy", >> + .data = &exynos5440_pcie_phy_data, >> + }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); >> + >> +static int exynos_pcie_phy_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct exynos_pcie_phy *exynos_phy; >> + struct phy *generic_phy; >> + struct phy_provider *phy_provider; >> + struct resource *res; >> + const struct exynos_pcie_phy_data *drv_data; >> + >> + drv_data = of_device_get_match_data(dev); >> + if (!drv_data) >> + return -ENODEV; >> + >> + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); >> + if (!exynos_phy) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + exynos_phy->phy_base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(exynos_phy->phy_base)) >> + return PTR_ERR(exynos_phy->phy_base); >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); >> + exynos_phy->blk_base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(exynos_phy->phy_base)) >> + return PTR_ERR(exynos_phy->phy_base); >> + >> + exynos_phy->drv_data = drv_data; >> + >> + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); >> + if (IS_ERR(generic_phy)) { >> + dev_err(dev, "failed to create PHY\n"); >> + return PTR_ERR(generic_phy); >> + } >> + >> + phy_set_drvdata(generic_phy, exynos_phy); >> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); >> + >> + return PTR_ERR_OR_ZERO(phy_provider); >> +} >> + >> +static struct platform_driver exynos_pcie_phy_driver = { >> + .probe = exynos_pcie_phy_probe, >> + .driver = { >> + .of_match_table = exynos_pcie_phy_match, >> + .name = "exynos_pcie_phy", >> + } >> +}; >> +module_platform_driver(exynos_pcie_phy_driver); >> > Thanks > Kishon > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index e8eb7f2..2dddef4 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD This driver provides PHY interface for USB 3.0 DRD controller present on Exynos5 SoC series. +config PHY_EXYNOS_PCIE + bool "Exynos PCIe PHY driver" + depends on ARCH_EXYNOS && OF + depends on PCI_EXYNOS + select GENERIC_PHY + help + Enable PCIe PHY support for Exynos SoC series. + This driver provides PHY interface for Exynos PCIe controller. + config PHY_PISTACHIO_USB tristate "IMG Pistachio USB2.0 PHY driver" depends on MACH_PISTACHIO diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 65eb2f4..081aeb4 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c new file mode 100644 index 0000000..b57f49b --- /dev/null +++ b/drivers/phy/phy-exynos-pcie.c @@ -0,0 +1,280 @@ +/* + * Samsung EXYNOS SoC series PCIe PHY driver + * + * Phy provider for PCIe controller on Exynos SoC series + * + * Copyright (C) 2016 Samsung Electronics Co., Ltd. + * Jaehoon Chung <jh80.chung@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> + +/* PCIe Purple registers */ +#define PCIE_PHY_GLOBAL_RESET 0x000 +#define PCIE_PHY_COMMON_RESET 0x004 +#define PCIE_PHY_CMN_REG 0x008 +#define PCIE_PHY_MAC_RESET 0x00c +#define PCIE_PHY_PLL_LOCKED 0x010 +#define PCIE_PHY_TRSVREG_RESET 0x020 +#define PCIE_PHY_TRSV_RESET 0x024 + +/* PCIe PHY registers */ +#define PCIE_PHY_IMPEDANCE 0x004 +#define PCIE_PHY_PLL_DIV_0 0x008 +#define PCIE_PHY_PLL_BIAS 0x00c +#define PCIE_PHY_DCC_FEEDBACK 0x014 +#define PCIE_PHY_PLL_DIV_1 0x05c +#define PCIE_PHY_COMMON_POWER 0x064 +#define PCIE_PHY_COMMON_PD_CMN BIT(3) +#define PCIE_PHY_TRSV0_EMP_LVL 0x084 +#define PCIE_PHY_TRSV0_DRV_LVL 0x088 +#define PCIE_PHY_TRSV0_RXCDR 0x0ac +#define PCIE_PHY_TRSV0_POWER 0x0c4 +#define PCIE_PHY_TRSV0_PD_TSV BIT(7) +#define PCIE_PHY_TRSV0_LVCC 0x0dc +#define PCIE_PHY_TRSV1_EMP_LVL 0x144 +#define PCIE_PHY_TRSV1_RXCDR 0x16c +#define PCIE_PHY_TRSV1_POWER 0x184 +#define PCIE_PHY_TRSV1_PD_TSV BIT(7) +#define PCIE_PHY_TRSV1_LVCC 0x19c +#define PCIE_PHY_TRSV2_EMP_LVL 0x204 +#define PCIE_PHY_TRSV2_RXCDR 0x22c +#define PCIE_PHY_TRSV2_POWER 0x244 +#define PCIE_PHY_TRSV2_PD_TSV BIT(7) +#define PCIE_PHY_TRSV2_LVCC 0x25c +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4 +#define PCIE_PHY_TRSV3_RXCDR 0x2ec +#define PCIE_PHY_TRSV3_POWER 0x304 +#define PCIE_PHY_TRSV3_PD_TSV BIT(7) +#define PCIE_PHY_TRSV3_LVCC 0x31c + +struct exynos_pcie_phy_data { + struct phy_ops *ops; +}; + +/* For Exynos pcie phy */ +struct exynos_pcie_phy { + const struct exynos_pcie_phy_data *drv_data; + void __iomem *phy_base; + void __iomem *blk_base; /* For exynos5440 */ +}; + +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset) +{ + writel(val, base + offset); +} + +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +/* For Exynos5440 specific functions */ +static int exynos5440_pcie_phy_init(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + /* DCC feedback control off */ + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK); + + /* set TX/RX impedance */ + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE); + + /* set 50Mhz PHY clock */ + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0); + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1); + + /* set TX Differential output for lane 0 */ + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL); + + /* set TX Pre-emphasis Level Control for lane 0 to minimum */ + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL); + + /* set RX clock and data recovery bandwidth */ + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS); + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR); + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR); + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR); + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR); + + /* change TX Pre-emphasis Level Control for lanes */ + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL); + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL); + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL); + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL); + + /* set LVCC */ + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC); + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC); + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC); + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC); + + /* pulse for common reset */ + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET); + udelay(500); + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); + + return 0; +} + +static int exynos5440_pcie_phy_power_on(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + u32 val; + + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET); + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG); + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET); + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); + val &= ~PCIE_PHY_COMMON_PD_CMN; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); + val &= ~PCIE_PHY_TRSV0_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); + val &= ~PCIE_PHY_TRSV1_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); + val &= ~PCIE_PHY_TRSV2_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); + val &= ~PCIE_PHY_TRSV3_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); + + return 0; +} + +static int exynos5440_pcie_phy_power_off(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + u32 val; + + while (exynos_pcie_phy_readl(ep->phy_base, + PCIE_PHY_PLL_LOCKED) == 0) { + val = exynos_pcie_phy_readl(ep->blk_base, + PCIE_PHY_PLL_LOCKED); + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val); + } + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER); + val |= PCIE_PHY_COMMON_PD_CMN; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER); + val |= PCIE_PHY_TRSV0_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER); + val |= PCIE_PHY_TRSV1_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER); + val |= PCIE_PHY_TRSV2_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER); + + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER); + val |= PCIE_PHY_TRSV3_PD_TSV; + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER); + + return 0; +} + +static int exynos5440_pcie_phy_reset(struct phy *phy) +{ + struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET); + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET); + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET); + + return 0; +} + +static struct phy_ops exynos5440_phy_ops = { + .init = exynos5440_pcie_phy_init, + .power_on = exynos5440_pcie_phy_power_on, + .power_off = exynos5440_pcie_phy_power_off, + .reset = exynos5440_pcie_phy_reset, +}; + +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = { + .ops = &exynos5440_phy_ops, +}; + +static const struct of_device_id exynos_pcie_phy_match[] = { + { + .compatible = "samsung,exynos5440-pcie-phy", + .data = &exynos5440_pcie_phy_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); + +static int exynos_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos_pcie_phy *exynos_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct resource *res; + const struct exynos_pcie_phy_data *drv_data; + + drv_data = of_device_get_match_data(dev); + if (!drv_data) + return -ENODEV; + + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL); + if (!exynos_phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + exynos_phy->phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(exynos_phy->phy_base)) + return PTR_ERR(exynos_phy->phy_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + exynos_phy->blk_base = devm_ioremap_resource(dev, res); + if (IS_ERR(exynos_phy->phy_base)) + return PTR_ERR(exynos_phy->phy_base); + + exynos_phy->drv_data = drv_data; + + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, exynos_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_pcie_phy_driver = { + .probe = exynos_pcie_phy_probe, + .driver = { + .of_match_table = exynos_pcie_phy_match, + .name = "exynos_pcie_phy", + } +}; +module_platform_driver(exynos_pcie_phy_driver);
This patch supports to use Generic Phy framework for Exynos PCIe phy. When Exynos that supported the pcie want to use the PCIe, it needs to control the phy resgister. But it should be more complex to control in their own PCIe device drivers. Currently, there is an exynos5440 case to support the pcie. So this driver is based on Exynos5440 PCIe. In future, will support the Other exynos SoCs likes exynos5433, exynos7. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- Changelog on V2: - Not include the codes relevant to pci-exynos. - Remove the getting child node. drivers/phy/Kconfig | 9 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/phy/phy-exynos-pcie.c