| Message ID | d4299228a500a889c2b4b9e305674f3d1ea9ae06.1483604760.git.viresh.kumar@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Viresh, On jeu., janv. 05 2017, Viresh Kumar <viresh.kumar@linaro.org> wrote: > This doesn't have any benefit apart from saving a small amount of memory > when it is disabled. The ifdef hackery in the code makes it dirty > unnecessarily. > > Clean it up by removing the Kconfig option completely. Few defconfigs > are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with > CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > arch/arm/configs/exynos_defconfig | 2 +- > arch/arm/configs/multi_v5_defconfig | 2 +- > arch/arm/configs/multi_v7_defconfig | 2 +- > arch/arm/configs/mvebu_v5_defconfig | 2 +- For this file: Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Gregory > arch/arm/configs/pxa_defconfig | 2 +- > arch/arm/configs/shmobile_defconfig | 2 +- > arch/mips/configs/lemote2f_defconfig | 1 - > arch/powerpc/configs/ppc6xx_defconfig | 1 - > arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +- > drivers/cpufreq/Kconfig | 8 -------- > drivers/cpufreq/cpufreq_stats.c | 14 -------------- > 11 files changed, 7 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig > index 79c415c33f69..809f0bf3042a 100644 > --- a/arch/arm/configs/exynos_defconfig > +++ b/arch/arm/configs/exynos_defconfig > @@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y > CONFIG_ARM_ATAG_DTB_COMPAT=y > CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig > index 361686a362f1..69a4bd13eea5 100644 > --- a/arch/arm/configs/multi_v5_defconfig > +++ b/arch/arm/configs/multi_v5_defconfig > @@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_ARM_APPENDED_DTB=y > CONFIG_ARM_ATAG_DTB_COMPAT=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_IDLE=y > CONFIG_ARM_KIRKWOOD_CPUIDLE=y > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index b01a43851294..2dcac90eba01 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -132,7 +132,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y > CONFIG_KEXEC=y > CONFIG_EFI=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig > index f7f6039419aa..4b598da0d086 100644 > --- a/arch/arm/configs/mvebu_v5_defconfig > +++ b/arch/arm/configs/mvebu_v5_defconfig > @@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_ARM_APPENDED_DTB=y > CONFIG_ARM_ATAG_DTB_COMPAT=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_IDLE=y > CONFIG_ARM_KIRKWOOD_CPUIDLE=y > diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig > index e4314b1227a3..271dc7e78e43 100644 > --- a/arch/arm/configs/pxa_defconfig > +++ b/arch/arm/configs/pxa_defconfig > @@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_CMDLINE="root=/dev/ram0 ro" > CONFIG_KEXEC=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > index 1b0f8ae36fb3..adeaecd831a4 100644 > --- a/arch/arm/configs/shmobile_defconfig > +++ b/arch/arm/configs/shmobile_defconfig > @@ -38,7 +38,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_ARM_APPENDED_DTB=y > CONFIG_KEXEC=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=y > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig > index 5da76e0e120f..bed745596d86 100644 > --- a/arch/mips/configs/lemote2f_defconfig > +++ b/arch/mips/configs/lemote2f_defconfig > @@ -40,7 +40,6 @@ CONFIG_PM_STD_PARTITION="/dev/hda3" > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_DEBUG=y > CONFIG_CPU_FREQ_STAT=m > -CONFIG_CPU_FREQ_STAT_DETAILS=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig > index 3ce91a3df27f..1d2d69dd6409 100644 > --- a/arch/powerpc/configs/ppc6xx_defconfig > +++ b/arch/powerpc/configs/ppc6xx_defconfig > @@ -62,7 +62,6 @@ CONFIG_MPC8610_HPCD=y > CONFIG_GEF_SBC610=y > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_STAT=m > -CONFIG_CPU_FREQ_STAT_DETAILS=y > CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig > index 9bdcf72ec06a..2fce54d9c388 100644 > --- a/arch/sh/configs/sh7785lcr_32bit_defconfig > +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig > @@ -25,7 +25,7 @@ CONFIG_SH_SH7785LCR=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_SH_CPU_FREQ=y > CONFIG_HEARTBEAT=y > diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig > index d8b164a7c4e5..15adef473d42 100644 > --- a/drivers/cpufreq/Kconfig > +++ b/drivers/cpufreq/Kconfig > @@ -37,14 +37,6 @@ config CPU_FREQ_STAT > > If in doubt, say N. > > -config CPU_FREQ_STAT_DETAILS > - bool "CPU frequency transition statistics details" > - depends on CPU_FREQ_STAT > - help > - Show detailed CPU frequency transition table in sysfs. > - > - If in doubt, say N. > - > choice > prompt "Default CPUFreq governor" > default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ > diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c > index ac284e66839c..18abd454da43 100644 > --- a/drivers/cpufreq/cpufreq_stats.c > +++ b/drivers/cpufreq/cpufreq_stats.c > @@ -25,9 +25,7 @@ struct cpufreq_stats { > unsigned int last_index; > u64 *time_in_state; > unsigned int *freq_table; > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > unsigned int *trans_table; > -#endif > }; > > static int cpufreq_stats_update(struct cpufreq_stats *stats) > @@ -46,9 +44,7 @@ static void cpufreq_stats_clear_table(struct cpufreq_stats *stats) > unsigned int count = stats->max_state; > > memset(stats->time_in_state, 0, count * sizeof(u64)); > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > memset(stats->trans_table, 0, count * count * sizeof(int)); > -#endif > stats->last_time = get_jiffies_64(); > stats->total_trans = 0; > } > @@ -84,7 +80,6 @@ static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf, > return count; > } > > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) > { > struct cpufreq_stats *stats = policy->stats; > @@ -129,7 +124,6 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) > return len; > } > cpufreq_freq_attr_ro(trans_table); > -#endif > > cpufreq_freq_attr_ro(total_trans); > cpufreq_freq_attr_ro(time_in_state); > @@ -139,9 +133,7 @@ static struct attribute *default_attrs[] = { > &total_trans.attr, > &time_in_state.attr, > &reset.attr, > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > &trans_table.attr, > -#endif > NULL > }; > static struct attribute_group stats_attr_group = { > @@ -200,9 +192,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy) > > alloc_size = count * sizeof(int) + count * sizeof(u64); > > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > alloc_size += count * count * sizeof(int); > -#endif > > /* Allocate memory for time_in_state/freq_table/trans_table in one go */ > stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL); > @@ -211,9 +201,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy) > > stats->freq_table = (unsigned int *)(stats->time_in_state + count); > > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > stats->trans_table = stats->freq_table + count; > -#endif > > stats->max_state = count; > > @@ -259,8 +247,6 @@ void cpufreq_stats_record_transition(struct cpufreq_policy *policy, > cpufreq_stats_update(stats); > > stats->last_index = new_index; > -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS > stats->trans_table[old_index * stats->max_state + new_index]++; > -#endif > stats->total_trans++; > } > -- > 2.7.1.410.g6faf27b >
Hi Viresh, On 2017년 01월 05일 17:27, Viresh Kumar wrote: > This doesn't have any benefit apart from saving a small amount of memory > when it is disabled. The ifdef hackery in the code makes it dirty > unnecessarily. > > Clean it up by removing the Kconfig option completely. Few defconfigs > are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with > CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > arch/arm/configs/exynos_defconfig | 2 +- > arch/arm/configs/multi_v5_defconfig | 2 +- > arch/arm/configs/multi_v7_defconfig | 2 +- > arch/arm/configs/mvebu_v5_defconfig | 2 +- > arch/arm/configs/pxa_defconfig | 2 +- > arch/arm/configs/shmobile_defconfig | 2 +- > arch/mips/configs/lemote2f_defconfig | 1 - > arch/powerpc/configs/ppc6xx_defconfig | 1 - > arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +- > drivers/cpufreq/Kconfig | 8 -------- > drivers/cpufreq/cpufreq_stats.c | 14 -------------- > 11 files changed, 7 insertions(+), 31 deletions(-) I agree. Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [snip]
On Thu, Jan 05, 2017 at 01:57:41PM +0530, Viresh Kumar wrote: > This doesn't have any benefit apart from saving a small amount of memory > when it is disabled. The ifdef hackery in the code makes it dirty > unnecessarily. > > Clean it up by removing the Kconfig option completely. Few defconfigs > are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with > CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > arch/arm/configs/exynos_defconfig | 2 +- > arch/arm/configs/multi_v5_defconfig | 2 +- > arch/arm/configs/multi_v7_defconfig | 2 +- > arch/arm/configs/mvebu_v5_defconfig | 2 +- > arch/arm/configs/pxa_defconfig | 2 +- > arch/arm/configs/shmobile_defconfig | 2 +- > arch/mips/configs/lemote2f_defconfig | 1 - > arch/powerpc/configs/ppc6xx_defconfig | 1 - > arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +- > drivers/cpufreq/Kconfig | 8 -------- > drivers/cpufreq/cpufreq_stats.c | 14 -------------- > 11 files changed, 7 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig > index 79c415c33f69..809f0bf3042a 100644 > --- a/arch/arm/configs/exynos_defconfig > +++ b/arch/arm/configs/exynos_defconfig > @@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y > CONFIG_ARM_ATAG_DTB_COMPAT=y > CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" > CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > +CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m For Exynos: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 79c415c33f69..809f0bf3042a 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 361686a362f1..69a4bd13eea5 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b01a43851294..2dcac90eba01 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -132,7 +132,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y CONFIG_EFI=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index f7f6039419aa..4b598da0d086 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index e4314b1227a3..271dc7e78e43 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 ro" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 1b0f8ae36fb3..adeaecd831a4 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -38,7 +38,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 5da76e0e120f..bed745596d86 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -40,7 +40,6 @@ CONFIG_PM_STD_PARTITION="/dev/hda3" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 3ce91a3df27f..1d2d69dd6409 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -62,7 +62,6 @@ CONFIG_MPC8610_HPCD=y CONFIG_GEF_SBC610=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig index 9bdcf72ec06a..2fce54d9c388 100644 --- a/arch/sh/configs/sh7785lcr_32bit_defconfig +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -25,7 +25,7 @@ CONFIG_SH_SH7785LCR=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_SH_CPU_FREQ=y CONFIG_HEARTBEAT=y diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index d8b164a7c4e5..15adef473d42 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -37,14 +37,6 @@ config CPU_FREQ_STAT If in doubt, say N. -config CPU_FREQ_STAT_DETAILS - bool "CPU frequency transition statistics details" - depends on CPU_FREQ_STAT - help - Show detailed CPU frequency transition table in sysfs. - - If in doubt, say N. - choice prompt "Default CPUFreq governor" default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index ac284e66839c..18abd454da43 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -25,9 +25,7 @@ struct cpufreq_stats { unsigned int last_index; u64 *time_in_state; unsigned int *freq_table; -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS unsigned int *trans_table; -#endif }; static int cpufreq_stats_update(struct cpufreq_stats *stats) @@ -46,9 +44,7 @@ static void cpufreq_stats_clear_table(struct cpufreq_stats *stats) unsigned int count = stats->max_state; memset(stats->time_in_state, 0, count * sizeof(u64)); -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS memset(stats->trans_table, 0, count * count * sizeof(int)); -#endif stats->last_time = get_jiffies_64(); stats->total_trans = 0; } @@ -84,7 +80,6 @@ static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf, return count; } -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) { struct cpufreq_stats *stats = policy->stats; @@ -129,7 +124,6 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) return len; } cpufreq_freq_attr_ro(trans_table); -#endif cpufreq_freq_attr_ro(total_trans); cpufreq_freq_attr_ro(time_in_state); @@ -139,9 +133,7 @@ static struct attribute *default_attrs[] = { &total_trans.attr, &time_in_state.attr, &reset.attr, -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS &trans_table.attr, -#endif NULL }; static struct attribute_group stats_attr_group = { @@ -200,9 +192,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy) alloc_size = count * sizeof(int) + count * sizeof(u64); -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS alloc_size += count * count * sizeof(int); -#endif /* Allocate memory for time_in_state/freq_table/trans_table in one go */ stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL); @@ -211,9 +201,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy) stats->freq_table = (unsigned int *)(stats->time_in_state + count); -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS stats->trans_table = stats->freq_table + count; -#endif stats->max_state = count; @@ -259,8 +247,6 @@ void cpufreq_stats_record_transition(struct cpufreq_policy *policy, cpufreq_stats_update(stats); stats->last_index = new_index; -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS stats->trans_table[old_index * stats->max_state + new_index]++; -#endif stats->total_trans++; }
This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/configs/exynos_defconfig | 2 +- arch/arm/configs/multi_v5_defconfig | 2 +- arch/arm/configs/multi_v7_defconfig | 2 +- arch/arm/configs/mvebu_v5_defconfig | 2 +- arch/arm/configs/pxa_defconfig | 2 +- arch/arm/configs/shmobile_defconfig | 2 +- arch/mips/configs/lemote2f_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +- drivers/cpufreq/Kconfig | 8 -------- drivers/cpufreq/cpufreq_stats.c | 14 -------------- 11 files changed, 7 insertions(+), 31 deletions(-)