| Message ID | 3e63c74c-1808-46bd-4c63-5ea049cca4e2@newflow.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 15/12/16 10:52, Mark Jackson wrote: >>From v4.2+ the GPMC code has been changed to reset all the bootloader > GPMC settings when the kernel starts. > > As such, this DTS file now needs the external FRAM defined. > > Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> <snip> Tony, any update on this patch ? Cheers Mark J -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Mark Jackson <mpfj-list@newflow.co.uk> [170104 02:56]: > On 15/12/16 10:52, Mark Jackson wrote: > >>From v4.2+ the GPMC code has been changed to reset all the bootloader > > GPMC settings when the kernel starts. > > > > As such, this DTS file now needs the external FRAM defined. > > > > Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> > > <snip> > > Tony, any update on this patch ? Applying into omap-for-v4.11/dt thanks. I usually don't get around to applying new stuff until around -rc2 or after the fixes are out of the way. And then I usually don't apply much anything except fixes after -rc6 FYI. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 483d585..807494b 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -249,7 +249,8 @@ #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */ + ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */ + <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */ nor@0,0 { reg = <0 0x00000000 0x08000000>; @@ -342,6 +343,34 @@ reg = <0x04000000 0x04000000>; /* 64MB */ }; }; + + fram@1,0 { + reg = <1 0x00000000 0x01000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <10>; + gpmc,adv-rd-off-ns = <20>; + gpmc,adv-wr-off-ns = <20>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <150>; + gpmc,we-on-ns = <30>; + gpmc,we-off-ns = <150>; + gpmc,rd-cycle-ns = <160>; + gpmc,wr-cycle-ns = <160>; + gpmc,access-ns = <130>; + gpmc,page-burst-access-ns = <10>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + gpmc,cycle2cycle-delay-ns = <10>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <0>; + }; }; &mac {
From v4.2+ the GPMC code has been changed to reset all the bootloader GPMC settings when the kernel starts. As such, this DTS file now needs the external FRAM defined. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> --- arch/arm/boot/dts/am335x-nano.dts | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)