| Message ID | 20161121165920.29809-2-ahaslam@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Sekhar, On 11/21/2016 10:59 AM, Axel Haslam wrote: > Add the usb1 device node for the da850 soc. > This will allow boards to use the usb1 port > when booting through DT. > > Signed-off-by: Axel Haslam <ahaslam@baylibre.com> > --- > arch/arm/boot/dts/da850.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 1bb1f6d..fbd50d6 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -406,6 +406,14 @@ > >; > status = "disabled"; > }; > + usb1: usb@225000 { > + compatible = "ti,da830-ohci"; > + reg = <0x225000 0x1000>; > + interrupts = <59>; > + phys = <&usb_phy 1>; > + phy-names = "usb-phy"; > + status = "disabled"; > + }; > gpio: gpio@226000 { > compatible = "ti,dm6441-gpio"; > gpio-controller; > This patch can be pickup up now. I have just tested with next-20171015 + linux-davinci/master.
On Thu, Jan 5, 2017 at 11:49 PM, David Lechner <david@lechnology.com> wrote: > Hi Sekhar, > > On 11/21/2016 10:59 AM, Axel Haslam wrote: >> >> Add the usb1 device node for the da850 soc. >> This will allow boards to use the usb1 port >> when booting through DT. >> >> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> >> --- >> arch/arm/boot/dts/da850.dtsi | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi >> index 1bb1f6d..fbd50d6 100644 >> --- a/arch/arm/boot/dts/da850.dtsi >> +++ b/arch/arm/boot/dts/da850.dtsi >> @@ -406,6 +406,14 @@ >> >; >> status = "disabled"; >> }; >> + usb1: usb@225000 { >> + compatible = "ti,da830-ohci"; >> + reg = <0x225000 0x1000>; >> + interrupts = <59>; >> + phys = <&usb_phy 1>; >> + phy-names = "usb-phy"; >> + status = "disabled"; >> + }; >> gpio: gpio@226000 { >> compatible = "ti,dm6441-gpio"; >> gpio-controller; >> > > > This patch can be pickup up now. I have just tested with next-20171015 + > linux-davinci/master. Yes, the regulator patches, are not actually needed for the lcdk, since it does not have the over current pin connected to a gpio. ill resend v2 removing the phy from the dts so that they can be both applied. -Axel.
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 1bb1f6d..fbd50d6 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -406,6 +406,14 @@ >; status = "disabled"; }; + usb1: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller;
Add the usb1 device node for the da850 soc. This will allow boards to use the usb1 port when booting through DT. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- arch/arm/boot/dts/da850.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)