| Message ID | 20170103230639.19660-9-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Laurent, On Wed, Jan 4, 2017 at 12:06 AM, Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> wrote: > Even though most of its registers are 8-bit wide, the IRDA has two > 16-bit registers that make it a 16-bit peripheral and not a 8-bit > peripheral with addresses shifted by one. Fix the memory resource size > and the platform data regshift value. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > arch/sh/kernel/cpu/sh3/setup-sh770x.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c > index e1e54258b822..084a91e6027e 100644 > --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c > +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c > @@ -157,11 +157,10 @@ static struct platform_device scif1_device = { > static struct plat_sci_port scif2_platform_data = { > .type = PORT_IRDA, > .ops = &sh770x_sci_port_ops, > - .regshift = 1, According to my sh7707 and sh7709 datasheets. regshift = 1 is correct. SCIx_IRDA_REGTYPE uses: [SCSMR] = { 0x00, 8 }, [SCBRR] = { 0x01, 8 }, [SCSCR] = { 0x02, 8 }, [SCxTDR] = { 0x03, 8 }, [SCxSR] = { 0x04, 8 }, [SCxRDR] = { 0x05, 8 }, [SCFCR] = { 0x06, 8 }, [SCFDR] = { 0x07, 16 }, While the datasheet says: SCSMR1 H'A4000140 8 bits SCBRR1 H'A4000142 8 bits SCSCR1 H'A4000144 8 bits SCFTDR1 H'A4000146 8 bits SCSSR1 H'A4000148 16 bits SCFRDR1 H'A400014A 8 bits SCFCR1 H'A400014C 8 bits SCFDR1 H'A400014E 16 bits So you do need regshift = 1 to handle the gaps. Note that SCSSR1 is a 16-bit registers, while SCIx_IRDA_REGTYPE declares it as 8-bit, so it may not work at all... Ah, you're fixing all this in "[PATCH 19/19] serial: sh-sci: Compute the regshift value for SCI ports". I think that part should be moved to this patch, to not break bisection. > static struct resource scif2_resources[] = { > - DEFINE_RES_MEM(0xa4000140, 0x10), > + DEFINE_RES_MEM(0xa4000140, 0x20), > DEFINE_RES_IRQ(evt2irq(0x880)), > }; According to the register list above, resource size 0x10 is correct. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Geert, On Friday 06 Jan 2017 11:18:32 Geert Uytterhoeven wrote: > On Wed, Jan 4, 2017 at 12:06 AM, Laurent Pinchart wrote: > > Even though most of its registers are 8-bit wide, the IRDA has two > > 16-bit registers that make it a 16-bit peripheral and not a 8-bit > > peripheral with addresses shifted by one. Fix the memory resource size > > and the platform data regshift value. > > > > Signed-off-by: Laurent Pinchart > > <laurent.pinchart+renesas@ideasonboard.com> > > --- > > > > arch/sh/kernel/cpu/sh3/setup-sh770x.c | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c > > b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index e1e54258b822..084a91e6027e > > 100644 > > --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c > > +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c > > @@ -157,11 +157,10 @@ static struct platform_device scif1_device = { > > static struct plat_sci_port scif2_platform_data = { > > .type = PORT_IRDA, > > .ops = &sh770x_sci_port_ops, > > - .regshift = 1, > > According to my sh7707 and sh7709 datasheets. regshift = 1 is correct. > > SCIx_IRDA_REGTYPE uses: > > [SCSMR] = { 0x00, 8 }, > [SCBRR] = { 0x01, 8 }, > [SCSCR] = { 0x02, 8 }, > [SCxTDR] = { 0x03, 8 }, > [SCxSR] = { 0x04, 8 }, > [SCxRDR] = { 0x05, 8 }, > [SCFCR] = { 0x06, 8 }, > [SCFDR] = { 0x07, 16 }, > > While the datasheet says: > > SCSMR1 H'A4000140 8 bits > SCBRR1 H'A4000142 8 bits > SCSCR1 H'A4000144 8 bits > SCFTDR1 H'A4000146 8 bits > SCSSR1 H'A4000148 16 bits > SCFRDR1 H'A400014A 8 bits > SCFCR1 H'A400014C 8 bits > SCFDR1 H'A400014E 16 bits > > So you do need regshift = 1 to handle the gaps. > > Note that SCSSR1 is a 16-bit registers, while SCIx_IRDA_REGTYPE > declares it as 8-bit, so it may not work at all... > > Ah, you're fixing all this in "[PATCH 19/19] serial: sh-sci: Compute the > regshift value for SCI ports". > I think that part should be moved to this patch, to not break bisection. Yes, I realized that after sending the series. If you think we need to care about bisection here (given that it seems that sh-sci hasn't been tested on SH since at least v3.1...) we can fix that. > > static struct resource scif2_resources[] = { > > - DEFINE_RES_MEM(0xa4000140, 0x10), > > + DEFINE_RES_MEM(0xa4000140, 0x20), > > DEFINE_RES_IRQ(evt2irq(0x880)), > > }; > > According to the register list above, resource size 0x10 is correct. I'll fix this.
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index e1e54258b822..084a91e6027e 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -157,11 +157,10 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { - DEFINE_RES_MEM(0xa4000140, 0x10), + DEFINE_RES_MEM(0xa4000140, 0x20), DEFINE_RES_IRQ(evt2irq(0x880)), };
Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the memory resource size and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)