| Message ID | 20170103230639.19660-20-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Laurent, On Wed, Jan 4, 2017 at 12:06 AM, Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> wrote: > SCI instances found in SH SoCs have different spacing between registers > depending on the SoC. The platform data contains a regshift field that > tells the driver by how many bits to shift the register offset to > compute its address. We can compute the regshift value automatically > based on the memory resource size, there's no need to pass the value > through platform data. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/tty/serial/sh-sci.c | 25 +++++++++++++++---------- > include/linux/serial_sci.h | 1 - > 2 files changed, 15 insertions(+), 11 deletions(-) > > diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c > index 5fc2606fc525..fbffe89b493f 100644 > --- a/drivers/tty/serial/sh-sci.c > +++ b/drivers/tty/serial/sh-sci.c > @@ -187,19 +187,18 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { > }, > > /* > - * Common definitions for legacy IrDA ports, dependent on > - * regshift value. > + * Common definitions for legacy IrDA ports. > */ > [SCIx_IRDA_REGTYPE] = { > .regs = { > [SCSMR] = { 0x00, 8 }, > - [SCBRR] = { 0x01, 8 }, > - [SCSCR] = { 0x02, 8 }, > - [SCxTDR] = { 0x03, 8 }, > - [SCxSR] = { 0x04, 8 }, > - [SCxRDR] = { 0x05, 8 }, > - [SCFCR] = { 0x06, 8 }, > - [SCFDR] = { 0x07, 16 }, > + [SCBRR] = { 0x02, 8 }, > + [SCSCR] = { 0x04, 8 }, > + [SCxTDR] = { 0x06, 8 }, > + [SCxSR] = { 0x08, 16 }, > + [SCxRDR] = { 0x0a, 8 }, > + [SCFCR] = { 0x0c, 8 }, > + [SCFDR] = { 0x0e, 16 }, This hunk is not documented, and belongs in "[PATCH 08/19] sh: sh3: sh770x: Fix platform data for the IRDA serial port" to avoid breaking bisection. The rest looks OK. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 5fc2606fc525..fbffe89b493f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -187,19 +187,18 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { .regs = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, }, .fifosize = 1, .overrun_reg = SCxSR, @@ -2573,9 +2572,15 @@ static int sci_init_single(struct platform_device *dev, port->type = p->type; port->flags = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags; - port->regshift = p->regshift; port->fifosize = sci_port->params->fifosize; + if (port->type == PORT_SCI) { + if (sci_port->reg_size >= 0x20) + port->regshift = 2; + else + port->regshift = 1; + } + /* * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index f9a4526f4ec5..e598eaef3962 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -56,7 +56,6 @@ struct plat_sci_port { /* * Platform overrides if necessary, defaults otherwise. */ - unsigned char regshift; unsigned char regtype; struct plat_sci_port_ops *ops;
SCI instances found in SH SoCs have different spacing between registers depending on the SoC. The platform data contains a regshift field that tells the driver by how many bits to shift the register offset to compute its address. We can compute the regshift value automatically based on the memory resource size, there's no need to pass the value through platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/tty/serial/sh-sci.c | 25 +++++++++++++++---------- include/linux/serial_sci.h | 1 - 2 files changed, 15 insertions(+), 11 deletions(-)