| Message ID | 1483934694-32425-2-git-send-email-peterx@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jan 09, 2017 at 12:04:53PM +0800, Peter Xu wrote: > We were using test.log before to keep all the test logs. This patch > creates one log file per test case under logs/ directory with name > "TESTNAME.log". Meanwhile, we will keep the last time log into > logs.old/. > > Renaming scripts/functions.bash into scripts/common.bash to store some > more global variables. > > Signed-off-by: Peter Xu <peterx@redhat.com> > --- > .gitignore | 3 ++- > Makefile | 4 ++-- > run_tests.sh | 22 +++++++++++++++------- > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > scripts/mkstandalone.sh | 2 +- > 5 files changed, 31 insertions(+), 13 deletions(-) > rename scripts/{functions.bash => common.bash} (75%) > > diff --git a/.gitignore b/.gitignore > index 3155418..0dc9a39 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -12,7 +12,8 @@ cscope.* > /lib/asm > /config.mak > /*-run > -/test.log > /msr.out > /tests > /build-head > +logs > +logs.old Without the leading '/' logs[.old] files or dirs in subdirs will also be ignored. You can add trailing '/' to all the dirs in .gitignore too in order to ensure we only ignore dirs. > diff --git a/Makefile b/Makefile > index a32333b..bd8843a 100644 > --- a/Makefile > +++ b/Makefile > @@ -94,9 +94,9 @@ libfdt_clean: > $(LIBFDT_objdir)/.*.d > > distclean: clean libfdt_clean > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* \ > build-head Can move build-head up now > - $(RM) -r tests > + $(RM) -r tests logs logs.old > > cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic > cscope: > diff --git a/run_tests.sh b/run_tests.sh > index 254129d..1e36d66 100755 > --- a/run_tests.sh > +++ b/run_tests.sh > @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then > exit 1 > fi > source config.mak > -source scripts/functions.bash > +source scripts/common.bash > > function usage() > { > @@ -46,17 +46,25 @@ while getopts "g:hv" opt; do > esac > done > > -RUNTIME_log_stderr () { cat >> test.log; } > +# RUNTIME_log_file will be configured later > +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } > RUNTIME_log_stdout () { > if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then > - ./scripts/pretty_print_stacks.py $1 >> test.log > + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file > else > - cat >> test.log > + cat >> $RUNTIME_log_file > fi > } > > - > config=$TEST_DIR/unittests.cfg > -rm -f test.log > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > + > +rm -rf $unittest_log_dir.old > +if ! mv $unittest_log_dir $unittest_log_dir.log; then You remove the destination above, so this should never fail. > + echo "Failed to backup $unittest_log_dir" > + exit 2 > +fi > + > +mkdir $unittest_log_dir > +echo "BUILD_HEAD=$(cat build-head)" > $unittest_log_dir/SUMMARY > + > for_each_unittest $config run > diff --git a/scripts/functions.bash b/scripts/common.bash > similarity index 75% > rename from scripts/functions.bash > rename to scripts/common.bash > index ee9143c..2dd7360 100644 > --- a/scripts/functions.bash > +++ b/scripts/common.bash > @@ -1,3 +1,12 @@ > +: ${unittest_log_dir:=logs} > + > +function run_task() > +{ > + local testname="$2" > + > + RUNTIME_log_file="${unittest_log_dir}/${testname}.log" > + "$@" > +} > > function for_each_unittest() > { > @@ -17,7 +26,7 @@ function for_each_unittest() > > while read -u $fd line; do > if [[ "$line" =~ ^\[(.*)\]$ ]]; then > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > testname=${BASH_REMATCH[1]} > smp=1 > kernel="" > @@ -45,6 +54,6 @@ function for_each_unittest() > timeout=${BASH_REMATCH[1]} > fi > done > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > exec {fd}<&- > } > diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh > index d2bae19..3c1938e 100755 > --- a/scripts/mkstandalone.sh > +++ b/scripts/mkstandalone.sh > @@ -5,7 +5,7 @@ if [ ! -f config.mak ]; then > exit 1 > fi > source config.mak > -source scripts/functions.bash > +source scripts/common.bash > > escape () > { > -- > 2.7.4 > > thanks, drew -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 10, 2017 at 06:28:41PM +0100, Andrew Jones wrote: > On Mon, Jan 09, 2017 at 12:04:53PM +0800, Peter Xu wrote: > > We were using test.log before to keep all the test logs. This patch > > creates one log file per test case under logs/ directory with name > > "TESTNAME.log". Meanwhile, we will keep the last time log into > > logs.old/. > > > > Renaming scripts/functions.bash into scripts/common.bash to store some > > more global variables. > > > > Signed-off-by: Peter Xu <peterx@redhat.com> > > --- > > .gitignore | 3 ++- > > Makefile | 4 ++-- > > run_tests.sh | 22 +++++++++++++++------- > > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > > scripts/mkstandalone.sh | 2 +- > > 5 files changed, 31 insertions(+), 13 deletions(-) > > rename scripts/{functions.bash => common.bash} (75%) > > > > diff --git a/.gitignore b/.gitignore > > index 3155418..0dc9a39 100644 > > --- a/.gitignore > > +++ b/.gitignore > > @@ -12,7 +12,8 @@ cscope.* > > /lib/asm > > /config.mak > > /*-run > > -/test.log > > /msr.out > > /tests > > /build-head > > +logs > > +logs.old > > Without the leading '/' logs[.old] files or dirs in subdirs will > also be ignored. You can add trailing '/' to all the dirs in > .gitignore too in order to ensure we only ignore dirs. Will do. > > > diff --git a/Makefile b/Makefile > > index a32333b..bd8843a 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -94,9 +94,9 @@ libfdt_clean: > > $(LIBFDT_objdir)/.*.d > > > > distclean: clean libfdt_clean > > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* \ > > build-head > > Can move build-head up now Yep. [...] > > - > > config=$TEST_DIR/unittests.cfg > > -rm -f test.log > > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > > + > > +rm -rf $unittest_log_dir.old > > +if ! mv $unittest_log_dir $unittest_log_dir.log; then > > You remove the destination above, so this should never fail. Hmm looks so... :) Let me fix. (And I used rm -rf again, but with ".old" it looks much safer so I dare to use it) Thanks, -- peterx -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/.gitignore b/.gitignore index 3155418..0dc9a39 100644 --- a/.gitignore +++ b/.gitignore @@ -12,7 +12,8 @@ cscope.* /lib/asm /config.mak /*-run -/test.log /msr.out /tests /build-head +logs +logs.old diff --git a/Makefile b/Makefile index a32333b..bd8843a 100644 --- a/Makefile +++ b/Makefile @@ -94,9 +94,9 @@ libfdt_clean: $(LIBFDT_objdir)/.*.d distclean: clean libfdt_clean - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* \ build-head - $(RM) -r tests + $(RM) -r tests logs logs.old cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic cscope: diff --git a/run_tests.sh b/run_tests.sh index 254129d..1e36d66 100755 --- a/run_tests.sh +++ b/run_tests.sh @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then exit 1 fi source config.mak -source scripts/functions.bash +source scripts/common.bash function usage() { @@ -46,17 +46,25 @@ while getopts "g:hv" opt; do esac done -RUNTIME_log_stderr () { cat >> test.log; } +# RUNTIME_log_file will be configured later +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } RUNTIME_log_stdout () { if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then - ./scripts/pretty_print_stacks.py $1 >> test.log + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file else - cat >> test.log + cat >> $RUNTIME_log_file fi } - config=$TEST_DIR/unittests.cfg -rm -f test.log -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log + +rm -rf $unittest_log_dir.old +if ! mv $unittest_log_dir $unittest_log_dir.log; then + echo "Failed to backup $unittest_log_dir" + exit 2 +fi + +mkdir $unittest_log_dir +echo "BUILD_HEAD=$(cat build-head)" > $unittest_log_dir/SUMMARY + for_each_unittest $config run diff --git a/scripts/functions.bash b/scripts/common.bash similarity index 75% rename from scripts/functions.bash rename to scripts/common.bash index ee9143c..2dd7360 100644 --- a/scripts/functions.bash +++ b/scripts/common.bash @@ -1,3 +1,12 @@ +: ${unittest_log_dir:=logs} + +function run_task() +{ + local testname="$2" + + RUNTIME_log_file="${unittest_log_dir}/${testname}.log" + "$@" +} function for_each_unittest() { @@ -17,7 +26,7 @@ function for_each_unittest() while read -u $fd line; do if [[ "$line" =~ ^\[(.*)\]$ ]]; then - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" testname=${BASH_REMATCH[1]} smp=1 kernel="" @@ -45,6 +54,6 @@ function for_each_unittest() timeout=${BASH_REMATCH[1]} fi done - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" exec {fd}<&- } diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh index d2bae19..3c1938e 100755 --- a/scripts/mkstandalone.sh +++ b/scripts/mkstandalone.sh @@ -5,7 +5,7 @@ if [ ! -f config.mak ]; then exit 1 fi source config.mak -source scripts/functions.bash +source scripts/common.bash escape () {
We were using test.log before to keep all the test logs. This patch creates one log file per test case under logs/ directory with name "TESTNAME.log". Meanwhile, we will keep the last time log into logs.old/. Renaming scripts/functions.bash into scripts/common.bash to store some more global variables. Signed-off-by: Peter Xu <peterx@redhat.com> --- .gitignore | 3 ++- Makefile | 4 ++-- run_tests.sh | 22 +++++++++++++++------- scripts/{functions.bash => common.bash} | 13 +++++++++++-- scripts/mkstandalone.sh | 2 +- 5 files changed, 31 insertions(+), 13 deletions(-) rename scripts/{functions.bash => common.bash} (75%)