diff mbox

[v5] arm64: dts: mt8173: add mmsel clocks for 4K support

Message ID 1470279438-60372-1-git-send-email-bibby.hsieh@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bibby Hsieh Aug. 4, 2016, 2:57 a.m. UTC
To support HDMI 4K resolution, mmsys need clcok
mm_sel to be 400MHz.

The board .dts file should override the clock rate
property with the higher VENCPLL frequency the board
supports HDMI 4K resolution.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
 1 file changed, 2 insertions(+)

Comments

Daniel Kurtz Jan. 12, 2017, 4:50 a.m. UTC | #1
Hi Matthias,

(Trying again to send plain text email)...

On Thu, Aug 4, 2016 at 10:57 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> To support HDMI 4K resolution, mmsys need clcok
> mm_sel to be 400MHz.
>
> The board .dts file should override the clock rate
> property with the higher VENCPLL frequency the board
> supports HDMI 4K resolution.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>

Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>


It looks like this patch was lost.  It is actually a prerequisite for
MTK 4k HDMI support, which already landed in v4.9.

See the email thread entitled:
[PATCH v5 0/3] MT8173 HDMI 4K support <https://lkml.org/lkml/2016/9/28/893>

Or these three:

0d2200794f0a drm/mediatek: modify the factor to make the pll_rate set
in the 1G-2G range
968253bd7caa drm/mediatek: enhance the HDMI driving current
d542b7c473f0 drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable

-Dan

> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 78529e4..c3f32f3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -690,6 +690,8 @@
>                         compatible = "mediatek,mt8173-mmsys", "syscon";
>                         reg = <0 0x14000000 0 0x1000>;
>                         power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> +                       assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
> +                       assigned-clock-rates = <400000000>;
>                         #clock-cells = <1>;
>                 };
>
> --
> 1.7.9.5
>
Matthias Brugger Jan. 13, 2017, 3:32 p.m. UTC | #2
On 12/01/17 05:50, Daniel Kurtz wrote:
> Hi Matthias,
>
> (Trying again to send plain text email)...
>
> On Thu, Aug 4, 2016 at 10:57 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
>> To support HDMI 4K resolution, mmsys need clcok
>> mm_sel to be 400MHz.
>>
>> The board .dts file should override the clock rate
>> property with the higher VENCPLL frequency the board
>> supports HDMI 4K resolution.
>>
>> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
>

Applied to v4.10-next/dts
Thanks

>
> It looks like this patch was lost.  It is actually a prerequisite for
> MTK 4k HDMI support, which already landed in v4.9.
>
> See the email thread entitled:
> [PATCH v5 0/3] MT8173 HDMI 4K support <https://lkml.org/lkml/2016/9/28/893>
>
> Or these three:
>
> 0d2200794f0a drm/mediatek: modify the factor to make the pll_rate set
> in the 1G-2G range
> 968253bd7caa drm/mediatek: enhance the HDMI driving current
> d542b7c473f0 drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
>
> -Dan
>
>> ---
>>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> index 78529e4..c3f32f3 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> @@ -690,6 +690,8 @@
>>                         compatible = "mediatek,mt8173-mmsys", "syscon";
>>                         reg = <0 0x14000000 0 0x1000>;
>>                         power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>> +                       assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
>> +                       assigned-clock-rates = <400000000>;
>>                         #clock-cells = <1>;
>>                 };
>>
>> --
>> 1.7.9.5
>>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 78529e4..c3f32f3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -690,6 +690,8 @@ 
 			compatible = "mediatek,mt8173-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
 			#clock-cells = <1>;
 		};