@@ -7,7 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ *
+ *
+ * Notice:
+ * This is not a list of all Exynos Power Management Unit SFRs.
+ * There are too many of them, not mentioning subtle differences
+ * between SoCs. For now, put here only the used registers.
+ */
#ifndef __LINUX_SOC_EXYNOS_REGS_PMU_H
#define __LINUX_SOC_EXYNOS_REGS_PMU_H __FILE__
@@ -38,7 +44,6 @@
#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n)
#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28)
#define EXYNOS_SWRESET 0x0400
-#define EXYNOS5440_SWRESET 0x00C4
#define S5P_WAKEUP_STAT 0x0600
#define S5P_EINT_WAKEUP_MASK 0x0604
@@ -136,12 +141,6 @@
#define EXYNOS_COMMON_OPTION(_nr) \
(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-#define EXYNOS_CORE_LOCAL_PWR_EN 0x3
-
-#define EXYNOS_ARM_COMMON_STATUS 0x2504
-#define EXYNOS_COMMON_OPTION(_nr) \
- (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-
#define EXYNOS_ARM_L2_CONFIGURATION 0x2600
#define EXYNOS_L2_CONFIGURATION(_nr) \
(EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80))
@@ -149,18 +148,10 @@
(EXYNOS_L2_CONFIGURATION(_nr) + 0x4)
#define EXYNOS_L2_OPTION(_nr) \
(EXYNOS_L2_CONFIGURATION(_nr) + 0x8)
-#define EXYNOS_L2_COMMON_PWR_EN 0x3
-
-#define EXYNOS_ARM_CORE_X_STATUS_OFFSET 0x4
-
-#define EXYNOS5_APLL_SYSCLK_CONFIGURATION 0x2A00
-#define EXYNOS5_APLL_SYSCLK_STATUS 0x2A04
#define EXYNOS5_ARM_L2_OPTION 0x2608
#define EXYNOS5_USE_RETENTION BIT(4)
-#define EXYNOS5_L2RSTDISABLE_VALUE BIT(3)
-
#define S5P_PAD_RET_MAUDIO_OPTION 0x3028
#define S5P_PAD_RET_MMC2_OPTION 0x30c8
#define S5P_PAD_RET_GPIO_OPTION 0x3108
@@ -411,7 +402,6 @@
#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC
#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208
#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228
@@ -485,7 +475,6 @@
#define EXYNOS5420_SWRESET_KFC_SEL 0x3
/* Only for EXYNOS5420 */
-#define EXYNOS5420_ISP_ARM_OPTION 0x2488
#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3)
#define EXYNOS5420_LPI_MASK 0x0004
@@ -494,9 +483,6 @@
#define EXYNOS5420_ATB_KFC BIT(13)
#define EXYNOS5420_ATB_ISP_ARM BIT(19)
#define EXYNOS5420_EMULATION BIT(31)
-#define ATB_ISP_ARM BIT(12)
-#define ATB_KFC BIT(13)
-#define ATB_NOC BIT(14)
#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100
#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104
@@ -510,11 +496,6 @@
#define EXYNOS5420_KFC_CORE_RESET(_nr) \
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
-#define EXYNOS5420_BB_CON1 0x0784
-#define EXYNOS5420_BB_SEL_EN BIT(31)
-#define EXYNOS5420_BB_PMOS_EN BIT(7)
-#define EXYNOS5420_BB_1300X 0XF
-
#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
@@ -546,15 +527,6 @@
#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178
#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8
#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC
-#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR 0x11C0
-#define EXYNOS5420_USBDEV_MEM_SYS_PWR 0x11CC
-#define EXYNOS5420_USBDEV1_MEM_SYS_PWR 0x11D0
-#define EXYNOS5420_SDMMC_MEM_SYS_PWR 0x11D4
-#define EXYNOS5420_CSSYS_MEM_SYS_PWR 0x11D8
-#define EXYNOS5420_SECSS_MEM_SYS_PWR 0x11DC
-#define EXYNOS5420_ROTATOR_MEM_SYS_PWR 0x11E0
-#define EXYNOS5420_INTRAM_MEM_SYS_PWR 0x11E4
-#define EXYNOS5420_INTROM_MEM_SYS_PWR 0x11E8
#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208
#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210
#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214
@@ -605,13 +577,7 @@
#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C
#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0
#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4
-#define EXYNOS_ARM_CORE2_CONFIGURATION 0x2100
-#define EXYNOS5420_ARM_CORE2_OPTION 0x2108
-#define EXYNOS_ARM_CORE3_CONFIGURATION 0x2180
-#define EXYNOS5420_ARM_CORE3_OPTION 0x2188
-#define EXYNOS5420_ARM_COMMON_STATUS 0x2504
#define EXYNOS5420_ARM_COMMON_OPTION 0x2508
-#define EXYNOS5420_KFC_COMMON_STATUS 0x2584
#define EXYNOS5420_KFC_COMMON_OPTION 0x2588
#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C
@@ -626,33 +592,9 @@
#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008
#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028
#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048
-#define EXYNOS_PAD_RET_GPIO_OPTION 0x3108
-#define EXYNOS_PAD_RET_UART_OPTION 0x3128
-#define EXYNOS_PAD_RET_MMCA_OPTION 0x3148
-#define EXYNOS_PAD_RET_MMCB_OPTION 0x3168
#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188
#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8
-#define EXYNOS_PS_HOLD_CONTROL 0x330C
-
-/* For SYS_PWR_REG */
-#define EXYNOS_SYS_PWR_CFG BIT(0)
-
-#define EXYNOS5420_MFC_CONFIGURATION 0x4060
-#define EXYNOS5420_MFC_STATUS 0x4064
-#define EXYNOS5420_MFC_OPTION 0x4068
-#define EXYNOS5420_G3D_CONFIGURATION 0x4080
-#define EXYNOS5420_G3D_STATUS 0x4084
-#define EXYNOS5420_G3D_OPTION 0x4088
-#define EXYNOS5420_DISP0_CONFIGURATION 0x40A0
-#define EXYNOS5420_DISP0_STATUS 0x40A4
-#define EXYNOS5420_DISP0_OPTION 0x40A8
-#define EXYNOS5420_DISP1_CONFIGURATION 0x40C0
-#define EXYNOS5420_DISP1_STATUS 0x40C4
-#define EXYNOS5420_DISP1_OPTION 0x40C8
-#define EXYNOS5420_MAU_CONFIGURATION 0x40E0
-#define EXYNOS5420_MAU_STATUS 0x40E4
-#define EXYNOS5420_MAU_OPTION 0x40E8
#define EXYNOS5420_FSYS2_OPTION 0x4168
#define EXYNOS5420_PSGEN_OPTION 0x4188
The exynos-regs-pmu.h was never a complete list of PMU registers. It contained a lot of holes for registers which are not used. However, a lot of unused defines came with porting the code from vendor kernel. Few of defines were also duplicated. Remove them so the file will be slightly smaller. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- include/linux/soc/samsung/exynos-regs-pmu.h | 72 +++-------------------------- 1 file changed, 7 insertions(+), 65 deletions(-)