diff mbox

[v3] Fix loading of module radeonfb on PowerMac

Message ID 1479886001-27801-1-git-send-email-malat@debian.org (mailing list archive)
State New, archived
Headers show

Commit Message

Mathieu Malaterre Nov. 23, 2016, 7:26 a.m. UTC
When the linux kernel is build with (typical kernel ship with Debian
installer):

CONFIG_FB_OF=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_FB_RADEON=m

The offb driver takes precedence over module radeonfb. It is then
impossible to load the module, error reported is:

[   96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[   96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
[   96.551531] radeonfb (0000:00:10.0): cannot request region 0.
[   96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16

This patch reproduce the behavior of the module radeon, so as to make it
possible to load radeonfb when offb is first loaded.

The problem is that offb call pci_request_region first, and then radeonfb
tries to do it, and since one is trying to take over from the other, it can't
do that because the area is already reserved.

It should be noticed that `offb_destroy` is never called which explain the
need to skip error detection on the radeonfb side.

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Link: https://bugs.debian.org/826629#57
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119741
Suggested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
---

v2: Remove compilation warning

v3: Hide error messages on PPC

 drivers/video/fbdev/aty/radeon_base.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Mathieu Malaterre Feb. 1, 2017, 6:55 a.m. UTC | #1
Any chance this patch could be considered for inclusion this time ?

Thanks

On Wed, Nov 23, 2016 at 8:26 AM, Mathieu Malaterre <malat@debian.org> wrote:
> When the linux kernel is build with (typical kernel ship with Debian
> installer):
>
> CONFIG_FB_OF=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_FB_RADEON=m
>
> The offb driver takes precedence over module radeonfb. It is then
> impossible to load the module, error reported is:
>
> [   96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
> [   96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
> [   96.551531] radeonfb (0000:00:10.0): cannot request region 0.
> [   96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16
>
> This patch reproduce the behavior of the module radeon, so as to make it
> possible to load radeonfb when offb is first loaded.
>
> The problem is that offb call pci_request_region first, and then radeonfb
> tries to do it, and since one is trying to take over from the other, it can't
> do that because the area is already reserved.
>
> It should be noticed that `offb_destroy` is never called which explain the
> need to skip error detection on the radeonfb side.
>
> Signed-off-by: Mathieu Malaterre <malat@debian.org>
> Link: https://bugs.debian.org/826629#57
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=119741
> Suggested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
> ---
>
> v2: Remove compilation warning
>
> v3: Hide error messages on PPC
>
>  drivers/video/fbdev/aty/radeon_base.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
> index 218339a..837c86a 100644
> --- a/drivers/video/fbdev/aty/radeon_base.c
> +++ b/drivers/video/fbdev/aty/radeon_base.c
> @@ -2259,6 +2259,22 @@ static struct bin_attribute edid2_attr = {
>         .read   = radeon_show_edid2,
>  };
>
> +static int radeon_kick_out_firmware_fb(struct pci_dev *pdev)
> +{
> +       struct apertures_struct *ap;
> +
> +       ap = alloc_apertures(1);
> +       if (!ap)
> +               return -ENOMEM;
> +
> +       ap->ranges[0].base = pci_resource_start(pdev, 0);
> +       ap->ranges[0].size = pci_resource_len(pdev, 0);
> +
> +       remove_conflicting_framebuffers(ap, KBUILD_MODNAME, false);
> +       kfree(ap);
> +
> +       return 0;
> +}
>
>  static int radeonfb_pci_register(struct pci_dev *pdev,
>                                  const struct pci_device_id *ent)
> @@ -2314,20 +2330,29 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
>         rinfo->fb_base_phys = pci_resource_start (pdev, 0);
>         rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
>
> +       ret = radeon_kick_out_firmware_fb(pdev);
> +       if (ret)
> +               return ret;
> +
>         /* request the mem regions */
>         ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
> +  /* this is not an error on PowerMac where offb already requested mem regions */
> +#ifndef CONFIG_PPC
>         if (ret < 0) {
>                 printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
>                         pci_name(rinfo->pdev));
>                 goto err_release_fb;
>         }
> +#endif
>
>         ret = pci_request_region(pdev, 2, "radeonfb mmio");
> +#ifndef CONFIG_PPC
>         if (ret < 0) {
>                 printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
>                         pci_name(rinfo->pdev));
>                 goto err_release_pci0;
>         }
> +#endif
>
>         /* map the regions */
>         rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
> @@ -2511,10 +2536,12 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
>         iounmap(rinfo->mmio_base);
>  err_release_pci2:
>         pci_release_region(pdev, 2);
> +#ifndef CONFIG_PPC
>  err_release_pci0:
>         pci_release_region(pdev, 0);
>  err_release_fb:
>          framebuffer_release(info);
> +#endif
>  err_disable:
>  err_out:
>         return ret;
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bartlomiej Zolnierkiewicz Feb. 2, 2017, 4:40 p.m. UTC | #2
Hi,

On Wednesday, February 01, 2017 07:55:25 AM Mathieu Malaterre wrote:
> Any chance this patch could be considered for inclusion this time ?
> 
> Thanks
> 
> On Wed, Nov 23, 2016 at 8:26 AM, Mathieu Malaterre <malat@debian.org> wrote:
> > When the linux kernel is build with (typical kernel ship with Debian
> > installer):
> >
> > CONFIG_FB_OF=y
> > CONFIG_VT_HW_CONSOLE_BINDING=y
> > CONFIG_FB_RADEON=m
> >
> > The offb driver takes precedence over module radeonfb. It is then
> > impossible to load the module, error reported is:
> >
> > [   96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
> > [   96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
> > [   96.551531] radeonfb (0000:00:10.0): cannot request region 0.
> > [   96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16
> >
> > This patch reproduce the behavior of the module radeon, so as to make it
> > possible to load radeonfb when offb is first loaded.
> >
> > The problem is that offb call pci_request_region first, and then radeonfb
> > tries to do it, and since one is trying to take over from the other, it can't
> > do that because the area is already reserved.
> >
> > It should be noticed that `offb_destroy` is never called which explain the
> > need to skip error detection on the radeonfb side.
> >
> > Signed-off-by: Mathieu Malaterre <malat@debian.org>
> > Link: https://bugs.debian.org/826629#57
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=119741
> > Suggested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
> > ---
> >
> > v2: Remove compilation warning
> >
> > v3: Hide error messages on PPC
> >
> >  drivers/video/fbdev/aty/radeon_base.c | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
> > index 218339a..837c86a 100644
> > --- a/drivers/video/fbdev/aty/radeon_base.c
> > +++ b/drivers/video/fbdev/aty/radeon_base.c
> > @@ -2259,6 +2259,22 @@ static struct bin_attribute edid2_attr = {
> >         .read   = radeon_show_edid2,
> >  };
> >
> > +static int radeon_kick_out_firmware_fb(struct pci_dev *pdev)
> > +{
> > +       struct apertures_struct *ap;
> > +
> > +       ap = alloc_apertures(1);
> > +       if (!ap)
> > +               return -ENOMEM;
> > +
> > +       ap->ranges[0].base = pci_resource_start(pdev, 0);
> > +       ap->ranges[0].size = pci_resource_len(pdev, 0);
> > +
> > +       remove_conflicting_framebuffers(ap, KBUILD_MODNAME, false);
> > +       kfree(ap);
> > +
> > +       return 0;
> > +}
> >
> >  static int radeonfb_pci_register(struct pci_dev *pdev,
> >                                  const struct pci_device_id *ent)
> > @@ -2314,20 +2330,29 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
> >         rinfo->fb_base_phys = pci_resource_start (pdev, 0);
> >         rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
> >
> > +       ret = radeon_kick_out_firmware_fb(pdev);
> > +       if (ret)
> > +               return ret;
> > +
> >         /* request the mem regions */
> >         ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
> > +  /* this is not an error on PowerMac where offb already requested mem regions */
> > +#ifndef CONFIG_PPC

This doesn't look correct:

- PPC is not only PowerMac and offb supports more cards
  than radeon (while radeonfb can be used for secondary
  graphics card)

- offb can be disabled

  (i.e. in CONFIG_FB_OF=n && CONFIG_FB_RADEON=y case error
  checking will be missing now)

The last put_fb_info() on fb_info should call ->fb_destroy
(offb_destroy in our case) and remove_conflicting_framebuffers()
is calling put_fb_info() so there is some extra reference on
fb_info somewhere preventing it from going away.

Please look into fixing this.

> >         if (ret < 0) {
> >                 printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
> >                         pci_name(rinfo->pdev));
> >                 goto err_release_fb;
> >         }
> > +#endif
> >
> >         ret = pci_request_region(pdev, 2, "radeonfb mmio");
> > +#ifndef CONFIG_PPC
> >         if (ret < 0) {
> >                 printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
> >                         pci_name(rinfo->pdev));
> >                 goto err_release_pci0;
> >         }
> > +#endif
> >
> >         /* map the regions */
> >         rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
> > @@ -2511,10 +2536,12 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
> >         iounmap(rinfo->mmio_base);
> >  err_release_pci2:
> >         pci_release_region(pdev, 2);
> > +#ifndef CONFIG_PPC
> >  err_release_pci0:
> >         pci_release_region(pdev, 0);
> >  err_release_fb:
> >          framebuffer_release(info);
> > +#endif
> >  err_disable:
> >  err_out:
> >         return ret;
> > --
> > 2.1.4

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 218339a..837c86a 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -2259,6 +2259,22 @@  static struct bin_attribute edid2_attr = {
 	.read	= radeon_show_edid2,
 };
 
+static int radeon_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+	struct apertures_struct *ap;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return -ENOMEM;
+
+	ap->ranges[0].base = pci_resource_start(pdev, 0);
+	ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+	remove_conflicting_framebuffers(ap, KBUILD_MODNAME, false);
+	kfree(ap);
+
+	return 0;
+}
 
 static int radeonfb_pci_register(struct pci_dev *pdev,
 				 const struct pci_device_id *ent)
@@ -2314,20 +2330,29 @@  static int radeonfb_pci_register(struct pci_dev *pdev,
 	rinfo->fb_base_phys = pci_resource_start (pdev, 0);
 	rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
 
+	ret = radeon_kick_out_firmware_fb(pdev);
+	if (ret)
+		return ret;
+
 	/* request the mem regions */
 	ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
+  /* this is not an error on PowerMac where offb already requested mem regions */
+#ifndef CONFIG_PPC
 	if (ret < 0) {
 		printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
 			pci_name(rinfo->pdev));
 		goto err_release_fb;
 	}
+#endif
 
 	ret = pci_request_region(pdev, 2, "radeonfb mmio");
+#ifndef CONFIG_PPC
 	if (ret < 0) {
 		printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
 			pci_name(rinfo->pdev));
 		goto err_release_pci0;
 	}
+#endif
 
 	/* map the regions */
 	rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
@@ -2511,10 +2536,12 @@  static int radeonfb_pci_register(struct pci_dev *pdev,
 	iounmap(rinfo->mmio_base);
 err_release_pci2:
 	pci_release_region(pdev, 2);
+#ifndef CONFIG_PPC
 err_release_pci0:
 	pci_release_region(pdev, 0);
 err_release_fb:
         framebuffer_release(info);
+#endif
 err_disable:
 err_out:
 	return ret;