| Message ID | 1485540693-31723-3-git-send-email-imbrenda@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 27/01/2017 19:11, Claudio Imbrenda wrote: > + /* mark valid CPUs with 1 */ > + CPU_FOREACH(cpu) { > + newstates[cpu_index(cpu) - 1] = 1; > + } Sorry I didn't notice this before: CPU indices are zero-based in QEMU, so you are probably overwriting newstates[-1]. I can adjust it myself, but can you please double check? Paolo > + > + /* > + * res keeps track of what error we are returning, with -1 meaning > + * that the command is unknown or unsupported, and thus returning > + * an empty packet, while -22 returns an E22 packet due to > + * invalid or incorrect parameters passed. > + */ > + res = 0; > + while (*p) { > + if (*p++ != ';') { > + res = -ENOTSUP; > + goto out; > + } > + > + cur_action = *p++; > + if (cur_action == 'C' || cur_action == 'S') { > + cur_action = tolower(cur_action); > + res = qemu_strtoul(p + 1, &p, 16, &tmp); > + if (res) { > + goto out; > + } > + signal = gdb_signal_to_target(tmp); > + } else if (cur_action != 'c' && cur_action != 's') { > + /* unknown/invalid/unsupported command */ > + res = -ENOTSUP; > + goto out; > + } > + /* thread specification. special values: (none), -1 = all; 0 = any */ > + if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) { > + if (*p == ':') { > + p += 3; > + } > + for (idx = 0; idx < max_cpus; idx++) { > + if (newstates[idx] == 1) { > + newstates[idx] = cur_action; > + } > + } > + } else if (*p == ':') { > + p++; > + res = qemu_strtoul(p, &p, 16, &tmp); > + if (res) { > + goto out; > + } > + idx = tmp; > + /* 0 means any thread, so we pick the first valid CPU */ > + if (!idx) { > + idx = cpu_index(first_cpu); > + } > + > + /* invalid CPU specified */ > + if (!idx || idx > max_cpus || !newstates[idx - 1]) { > + res = -EINVAL; > + goto out; > + } > + /* only use if no previous match occourred */ > + if (newstates[idx - 1] == 1) { > + newstates[idx - 1] = cur_action; > + } > + }
On 06/02/17 11:00, Paolo Bonzini wrote: > > > On 27/01/2017 19:11, Claudio Imbrenda wrote: >> + /* mark valid CPUs with 1 */ >> + CPU_FOREACH(cpu) { >> + newstates[cpu_index(cpu) - 1] = 1; >> + } > > Sorry I didn't notice this before: CPU indices are zero-based in QEMU, > so you are probably overwriting newstates[-1]. I can adjust it myself, > but can you please double check? they are zero based in the struct, but the already existing cpu_index function (include/exec/gdbstub.h) does this: static inline int cpu_index(CPUState *cpu) { #if defined(CONFIG_USER_ONLY) return cpu->host_tid; #else return cpu->cpu_index + 1; #endif } maybe that can just become newstates[cpu->cpu_index] = 1 ? (since we're not in CONFIG_USER_ONLY anyway) > Paolo > >> + >> + /* >> + * res keeps track of what error we are returning, with -1 meaning >> + * that the command is unknown or unsupported, and thus returning >> + * an empty packet, while -22 returns an E22 packet due to >> + * invalid or incorrect parameters passed. >> + */ >> + res = 0; >> + while (*p) { >> + if (*p++ != ';') { >> + res = -ENOTSUP; >> + goto out; >> + } >> + >> + cur_action = *p++; >> + if (cur_action == 'C' || cur_action == 'S') { >> + cur_action = tolower(cur_action); >> + res = qemu_strtoul(p + 1, &p, 16, &tmp); >> + if (res) { >> + goto out; >> + } >> + signal = gdb_signal_to_target(tmp); >> + } else if (cur_action != 'c' && cur_action != 's') { >> + /* unknown/invalid/unsupported command */ >> + res = -ENOTSUP; >> + goto out; >> + } >> + /* thread specification. special values: (none), -1 = all; 0 = any */ >> + if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) { >> + if (*p == ':') { >> + p += 3; >> + } >> + for (idx = 0; idx < max_cpus; idx++) { >> + if (newstates[idx] == 1) { >> + newstates[idx] = cur_action; >> + } >> + } >> + } else if (*p == ':') { >> + p++; >> + res = qemu_strtoul(p, &p, 16, &tmp); >> + if (res) { >> + goto out; >> + } >> + idx = tmp; >> + /* 0 means any thread, so we pick the first valid CPU */ >> + if (!idx) { >> + idx = cpu_index(first_cpu); >> + } >> + >> + /* invalid CPU specified */ >> + if (!idx || idx > max_cpus || !newstates[idx - 1]) { >> + res = -EINVAL; >> + goto out; >> + } >> + /* only use if no previous match occourred */ >> + if (newstates[idx - 1] == 1) { >> + newstates[idx - 1] = cur_action; >> + } >> + } >
On 07/02/2017 10:59, Claudio Imbrenda wrote: > static inline int cpu_index(CPUState *cpu) > { > #if defined(CONFIG_USER_ONLY) > return cpu->host_tid; > #else > return cpu->cpu_index + 1; > #endif > } > > > maybe that can just become newstates[cpu->cpu_index] = 1 ? > (since we're not in CONFIG_USER_ONLY anyway) Yes, I think it should be like that, especially if in the future we want to support CONFIG_USER_ONLY it makes no sense to use host PIDs. Paolo
diff --git a/gdbstub.c b/gdbstub.c index de9b62b..c298bf0 100644 --- a/gdbstub.c +++ b/gdbstub.c @@ -386,6 +386,51 @@ static inline void gdb_continue(GDBState *s) #endif } +/* + * Resume execution, per CPU actions. For user-mode emulation it's + * equivalent to gdb_continue. + */ +static int gdb_continue_partial(GDBState *s, char *newstates) +{ + int res = 0; +#ifdef CONFIG_USER_ONLY + s->running_state = 1; +#else + CPUState *cpu; + int flag = 0; + + if (!runstate_needs_reset()) { + if (vm_prepare_start()) { + return 0; + } + + CPU_FOREACH(cpu) { + switch (newstates[cpu_index(cpu) - 1]) { + case 0: + case 1: + break; /* nothing to do here */ + case 's': + cpu_single_step(cpu, sstep_flags); + cpu_resume(cpu); + flag = 1; + break; + case 'c': + cpu_resume(cpu); + flag = 1; + break; + default: + res = -1; + break; + } + } + } + if (flag) { + qemu_clock_enable(QEMU_CLOCK_VIRTUAL, true); + } +#endif + return res; +} + static void put_buffer(GDBState *s, const uint8_t *buf, int len) { #ifdef CONFIG_USER_ONLY @@ -784,6 +829,101 @@ static int is_query_packet(const char *p, const char *query, char separator) (p[query_len] == '\0' || p[query_len] == separator); } +/** + * gdb_handle_vcont - Parses and handles a vCont packet. + * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is + * a format error, 0 on success. + */ +static int gdb_handle_vcont(GDBState *s, const char *p) +{ + int res, idx, signal = 0; + char cur_action; + char *newstates; + unsigned long tmp; + CPUState *cpu; +#ifdef CONFIG_USER_ONLY + int max_cpus = 1; /* global variable max_cpus exists only in system mode */ + + CPU_FOREACH(cpu) { + max_cpus = max_cpus < cpu_index(cpu) ? cpu_index(cpu) : max_cpus; + } +#endif + /* uninitialised CPUs stay 0 */ + newstates = g_new0(char, max_cpus); + + /* mark valid CPUs with 1 */ + CPU_FOREACH(cpu) { + newstates[cpu_index(cpu) - 1] = 1; + } + + /* + * res keeps track of what error we are returning, with -1 meaning + * that the command is unknown or unsupported, and thus returning + * an empty packet, while -22 returns an E22 packet due to + * invalid or incorrect parameters passed. + */ + res = 0; + while (*p) { + if (*p++ != ';') { + res = -ENOTSUP; + goto out; + } + + cur_action = *p++; + if (cur_action == 'C' || cur_action == 'S') { + cur_action = tolower(cur_action); + res = qemu_strtoul(p + 1, &p, 16, &tmp); + if (res) { + goto out; + } + signal = gdb_signal_to_target(tmp); + } else if (cur_action != 'c' && cur_action != 's') { + /* unknown/invalid/unsupported command */ + res = -ENOTSUP; + goto out; + } + /* thread specification. special values: (none), -1 = all; 0 = any */ + if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) { + if (*p == ':') { + p += 3; + } + for (idx = 0; idx < max_cpus; idx++) { + if (newstates[idx] == 1) { + newstates[idx] = cur_action; + } + } + } else if (*p == ':') { + p++; + res = qemu_strtoul(p, &p, 16, &tmp); + if (res) { + goto out; + } + idx = tmp; + /* 0 means any thread, so we pick the first valid CPU */ + if (!idx) { + idx = cpu_index(first_cpu); + } + + /* invalid CPU specified */ + if (!idx || idx > max_cpus || !newstates[idx - 1]) { + res = -EINVAL; + goto out; + } + /* only use if no previous match occourred */ + if (newstates[idx - 1] == 1) { + newstates[idx - 1] = cur_action; + } + } + } + s->signal = signal; + gdb_continue_partial(s, newstates); + +out: + g_free(newstates); + + return res; +} + static int gdb_handle_packet(GDBState *s, const char *line_buf) { CPUState *cpu; @@ -829,60 +969,20 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf) return RS_IDLE; case 'v': if (strncmp(p, "Cont", 4) == 0) { - int res_signal, res_thread; - p += 4; if (*p == '?') { put_packet(s, "vCont;c;C;s;S"); break; } - res = 0; - res_signal = 0; - res_thread = 0; - while (*p) { - int action, signal; - - if (*p++ != ';') { - res = 0; - break; - } - action = *p++; - signal = 0; - if (action == 'C' || action == 'S') { - signal = gdb_signal_to_target(strtoul(p, (char **)&p, 16)); - if (signal == -1) { - signal = 0; - } - } else if (action != 'c' && action != 's') { - res = 0; - break; - } - thread = 0; - if (*p == ':') { - thread = strtoull(p+1, (char **)&p, 16); - } - action = tolower(action); - if (res == 0 || (res == 'c' && action == 's')) { - res = action; - res_signal = signal; - res_thread = thread; - } - } + + res = gdb_handle_vcont(s, p); + if (res) { - if (res_thread != -1 && res_thread != 0) { - cpu = find_cpu(res_thread); - if (cpu == NULL) { - put_packet(s, "E22"); - break; - } - s->c_cpu = cpu; - } - if (res == 's') { - cpu_single_step(s->c_cpu, sstep_flags); + if ((res == -EINVAL) || (res == -ERANGE)) { + put_packet(s, "E22"); + break; } - s->signal = res_signal; - gdb_continue(s); - return RS_IDLE; + goto unknown_command; } break; } else {
When GDB issues a "vCont", QEMU was not handling it correctly when multiple VCPUs are active. For vCont, for each thread (VCPU), it can be specified whether to single step, continue or stop that thread. The default is to stop a thread. However, when (for example) "vCont;s:2" is issued, all VCPUs continue to run, although all but VCPU nr 2 are to be stopped. This patch completely rewrites the vCont parsing code. Please note that this improvement only works in system emulation mode, when in userspace emulation mode the old behaviour is preserved. Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> --- gdbstub.c | 194 +++++++++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 147 insertions(+), 47 deletions(-)