diff mbox

reset-socfpga: Fix nr_resets property

Message ID 3302533.E0QKRXBlfc@pcimr (mailing list archive)
State Accepted
Headers show

Commit Message

Rojhalat Ibrahim Feb. 15, 2017, 1:06 p.m. UTC 
The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define
for two unrelated purposes. It is used
1. as an increment for reset line banks which are 32-bit registers with 4-byte
aligned addresses.
2. as the total number of reset line banks which together with the number of
resets per bank (32) limits the total number of useable resets to 96 and the
highest useable reset ID to 95.

This is clearly wrong as there are resets with higher IDs than 95 defined in
include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.

The patch introduces a new define BANK_INCREMENT for calculating the register
addresses as before and increases NR_BANKS to 6 for useable reset IDs up to 191.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
 reset-socfpga.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)


--
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Philipp Zabel Feb. 15, 2017, 2:57 p.m. UTC | #1 
[Added Dinh to Cc:]

On Wed, 2017-02-15 at 14:06 +0100, Rojhalat Ibrahim wrote:
> The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define
> for two unrelated purposes. It is used
> 1. as an increment for reset line banks which are 32-bit registers with 4-byte
> aligned addresses.
> 2. as the total number of reset line banks which together with the number of
> resets per bank (32) limits the total number of useable resets to 96 and the
> highest useable reset ID to 95.
> This is clearly wrong as there are resets with higher IDs than 95 defined in

128 and 127, respectively.

> include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.
> 
> The patch introduces a new define BANK_INCREMENT for calculating the register
> addresses as before and increases NR_BANKS to 6 for useable reset IDs up to 191.

Actually, looking at the Arria 10 TRM, it looks like there are
mpumodrst, per0modrst, per1modrst, brgmodrst, sysmodrst, coldmodrst,
nrstmodrst, and dbgmodrst registers on that SoC, which would mean
NR_BANKS should be changed to 8. Dinh, what do you think?

regards
Philipp

> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
> ---
>  reset-socfpga.c |   13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
> index 43e4a9f..1c8e491 100644
> --- a/drivers/reset/reset-socfpga.c
> +++ b/drivers/reset/reset-socfpga.c
> @@ -25,7 +25,8 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  
> -#define NR_BANKS		4
> +#define BANK_INCREMENT		4
> +#define NR_BANKS		6
>  
>  struct socfpga_reset_data {
>  	spinlock_t			lock;
> @@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
>  
>  	spin_lock_irqsave(&data->lock, flags);
>  
> -	reg = readl(data->membase + (bank * NR_BANKS));
> -	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
> +	reg = readl(data->membase + (bank * BANK_INCREMENT));
> +	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
>  	spin_unlock_irqrestore(&data->lock, flags);
>  
>  	return 0;
> @@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
>  
>  	spin_lock_irqsave(&data->lock, flags);
>  
> -	reg = readl(data->membase + (bank * NR_BANKS));
> -	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
> +	reg = readl(data->membase + (bank * BANK_INCREMENT));
> +	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
>  
>  	spin_unlock_irqrestore(&data->lock, flags);
>  
> @@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
>  	int offset = id % BITS_PER_LONG;
>  	u32 reg;
>  
> -	reg = readl(data->membase + (bank * NR_BANKS));
> +	reg = readl(data->membase + (bank * BANK_INCREMENT));
>  
>  	return !(reg & BIT(offset));
>  }
> 
> --
> 2.10.2
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
dinguyen@opensource.altera.com Feb. 15, 2017, 3:57 p.m. UTC | #2 
On 02/15/2017 08:57 AM, Philipp Zabel wrote:
> [Added Dinh to Cc:]
> 
> On Wed, 2017-02-15 at 14:06 +0100, Rojhalat Ibrahim wrote:
>> The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define
>> for two unrelated purposes. It is used
>> 1. as an increment for reset line banks which are 32-bit registers with 4-byte
>> aligned addresses.
>> 2. as the total number of reset line banks which together with the number of
>> resets per bank (32) limits the total number of useable resets to 96 and the
>> highest useable reset ID to 95.
>> This is clearly wrong as there are resets with higher IDs than 95 defined in
> 
> 128 and 127, respectively.
> 
>> include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.
>>
>> The patch introduces a new define BANK_INCREMENT for calculating the register
>> addresses as before and increases NR_BANKS to 6 for useable reset IDs up to 191.
> 
> Actually, looking at the Arria 10 TRM, it looks like there are
> mpumodrst, per0modrst, per1modrst, brgmodrst, sysmodrst, coldmodrst,
> nrstmodrst, and dbgmodrst registers on that SoC, which would mean
> NR_BANKS should be changed to 8. Dinh, what do you think?
> 

Yes, I agree. Should be 8. Thanks for the patch!

Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 43e4a9f..1c8e491 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -25,7 +25,8 @@ 
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#define NR_BANKS		4
+#define BANK_INCREMENT		4
+#define NR_BANKS		6
 
 struct socfpga_reset_data {
 	spinlock_t			lock;
@@ -46,8 +47,8 @@  static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,8 +68,8 @@  static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -84,7 +85,7 @@  static int socfpga_reset_status(struct reset_controller_dev *rcdev,
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
 
 	return !(reg & BIT(offset));
 }