diff mbox

[11/15] media: s5p-mfc: Split variant DMA memory configuration into separate functions

Message ID 1487058728-16501-12-git-send-email-m.szyprowski@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Marek Szyprowski Feb. 14, 2017, 7:52 a.m. UTC 
Move code for DMA memory configuration with IOMMU into separate function
to make it easier to compare what is being done in each case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 102 ++++++++++++++++++-------------
 1 file changed, 61 insertions(+), 41 deletions(-)

Comments

Javier Martinez Canillas Feb. 17, 2017, 8:04 p.m. UTC | #1 
Hello Marek,

On 02/14/2017 04:52 AM, Marek Szyprowski wrote:
> Move code for DMA memory configuration with IOMMU into separate function
> to make it easier to compare what is being done in each case.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc.c | 102 ++++++++++++++++++-------------
>  1 file changed, 61 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index 92a88c20b26d..a18740c81c55 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -1107,41 +1107,13 @@ static struct device *s5p_mfc_alloc_memdev(struct device *dev,
>  	return NULL;
>  }
>  
> -static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
> +static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev)
>  {
>  	struct device *dev = &mfc_dev->plat_dev->dev;
>  	void *bank2_virt;
>  	dma_addr_t bank2_dma_addr;
>  	unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER;
> -	struct s5p_mfc_priv_buf *fw_buf = &mfc_dev->fw_buf;
> -
> -	/*
> -	 * When IOMMU is available, we cannot use the default configuration,
> -	 * because of MFC firmware requirements: address space limited to
> -	 * 256M and non-zero default start address.
> -	 * This is still simplified, not optimal configuration, but for now
> -	 * IOMMU core doesn't allow to configure device's IOMMUs channel
> -	 * separately.
> -	 */
> -	if (exynos_is_iommu_available(dev)) {
> -		int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
> -						 S5P_MFC_IOMMU_DMA_SIZE);
> -		if (ret)
> -			return ret;
> -
> -		mfc_dev->mem_dev[BANK1_CTX] = mfc_dev->mem_dev[BANK2_CTX] = dev;
> -		ret = s5p_mfc_alloc_firmware(mfc_dev);
> -		if (ret) {
> -			exynos_unconfigure_iommu(dev);
> -			return ret;
> -		}
> -
> -		mfc_dev->dma_base[BANK1_CTX] = mfc_dev->fw_buf.dma;
> -		mfc_dev->dma_base[BANK2_CTX] = mfc_dev->fw_buf.dma;
> -		vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> -
> -		return 0;
> -	}
> +	int ret;

This should be declared in patch 8/15.

>  
>  	/*
>  	 * Create and initialize virtual devices for accessing
> @@ -1188,26 +1160,74 @@ static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
>  					DMA_BIT_MASK(32));
>  	vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK2_CTX],
>  					DMA_BIT_MASK(32));
> -

This seems to be an unrelated change.

The rest looks good to me.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
diff mbox

Patch

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 92a88c20b26d..a18740c81c55 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1107,41 +1107,13 @@  static struct device *s5p_mfc_alloc_memdev(struct device *dev,
 	return NULL;
 }
 
-static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev)
 {
 	struct device *dev = &mfc_dev->plat_dev->dev;
 	void *bank2_virt;
 	dma_addr_t bank2_dma_addr;
 	unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER;
-	struct s5p_mfc_priv_buf *fw_buf = &mfc_dev->fw_buf;
-
-	/*
-	 * When IOMMU is available, we cannot use the default configuration,
-	 * because of MFC firmware requirements: address space limited to
-	 * 256M and non-zero default start address.
-	 * This is still simplified, not optimal configuration, but for now
-	 * IOMMU core doesn't allow to configure device's IOMMUs channel
-	 * separately.
-	 */
-	if (exynos_is_iommu_available(dev)) {
-		int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
-						 S5P_MFC_IOMMU_DMA_SIZE);
-		if (ret)
-			return ret;
-
-		mfc_dev->mem_dev[BANK1_CTX] = mfc_dev->mem_dev[BANK2_CTX] = dev;
-		ret = s5p_mfc_alloc_firmware(mfc_dev);
-		if (ret) {
-			exynos_unconfigure_iommu(dev);
-			return ret;
-		}
-
-		mfc_dev->dma_base[BANK1_CTX] = mfc_dev->fw_buf.dma;
-		mfc_dev->dma_base[BANK2_CTX] = mfc_dev->fw_buf.dma;
-		vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
-
-		return 0;
-	}
+	int ret;
 
 	/*
 	 * Create and initialize virtual devices for accessing
@@ -1188,26 +1160,74 @@  static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
 					DMA_BIT_MASK(32));
 	vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK2_CTX],
 					DMA_BIT_MASK(32));
-
 	return 0;
 }
 
-static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+static void s5p_mfc_unconfigure_2port_memory(struct s5p_mfc_dev *mfc_dev)
 {
-	struct device *dev = &mfc_dev->plat_dev->dev;
+	device_unregister(mfc_dev->mem_dev[BANK1_CTX]);
+	device_unregister(mfc_dev->mem_dev[BANK2_CTX]);
+	vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK1_CTX]);
+	vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK2_CTX]);
+}
 
-	s5p_mfc_release_firmware(mfc_dev);
+static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	struct device *dev = &mfc_dev->plat_dev->dev;
+	/*
+	 * When IOMMU is available, we cannot use the default configuration,
+	 * because of MFC firmware requirements: address space limited to
+	 * 256M and non-zero default start address.
+	 * This is still simplified, not optimal configuration, but for now
+	 * IOMMU core doesn't allow to configure device's IOMMUs channel
+	 * separately.
+	 */
+	int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
+					 S5P_MFC_IOMMU_DMA_SIZE);
+	if (ret)
+		return ret;
 
-	if (exynos_is_iommu_available(dev)) {
+	mfc_dev->mem_dev[BANK1_CTX] = mfc_dev->mem_dev[BANK2_CTX] = dev;
+	ret = s5p_mfc_alloc_firmware(mfc_dev);
+	if (ret) {
 		exynos_unconfigure_iommu(dev);
-		vb2_dma_contig_clear_max_seg_size(dev);
-		return;
+		return ret;
 	}
 
-	device_unregister(mfc_dev->mem_dev[BANK1_CTX]);
-	device_unregister(mfc_dev->mem_dev[BANK2_CTX]);
-	vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK1_CTX]);
-	vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK2_CTX]);
+	mfc_dev->dma_base[BANK1_CTX] = mfc_dev->fw_buf.dma;
+	mfc_dev->dma_base[BANK2_CTX] = mfc_dev->fw_buf.dma;
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
+
+	return 0;
+}
+
+static void s5p_mfc_unconfigure_common_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	struct device *dev = &mfc_dev->plat_dev->dev;
+
+	exynos_unconfigure_iommu(dev);
+	vb2_dma_contig_clear_max_seg_size(dev);
+}
+
+static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	struct device *dev = &mfc_dev->plat_dev->dev;
+
+	if (exynos_is_iommu_available(dev))
+		return s5p_mfc_configure_common_memory(mfc_dev);
+	else
+		return s5p_mfc_configure_2port_memory(mfc_dev);
+}
+
+static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	struct device *dev = &mfc_dev->plat_dev->dev;
+
+	s5p_mfc_release_firmware(mfc_dev);
+	if (exynos_is_iommu_available(dev))
+		s5p_mfc_unconfigure_common_memory(mfc_dev);
+	else
+		s5p_mfc_unconfigure_2port_memory(mfc_dev);
 }
 
 /* MFC probe function */