Message ID | 20170224210746.12459-1-krzk@kernel.org (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On 02/24/2017 01:07 PM, Krzysztof Kozlowski wrote: > Replace the 'debug' module parameter and pr_info() with proper device > dynamic debug calls because this is the preferred and flexible way of > enabling debugging printks. > > Also remove some obvious debug printks. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > drivers/watchdog/s3c2410_wdt.c | 29 ++++++----------------------- > 1 file changed, 6 insertions(+), 23 deletions(-) > > diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c > index 7db7847a005c..f7aad19d20ff 100644 > --- a/drivers/watchdog/s3c2410_wdt.c > +++ b/drivers/watchdog/s3c2410_wdt.c > @@ -23,8 +23,6 @@ > * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > */ > > -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > - > #include <linux/module.h> > #include <linux/moduleparam.h> > #include <linux/types.h> > @@ -83,13 +81,11 @@ static bool nowayout = WATCHDOG_NOWAYOUT; > static int tmr_margin; > static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT; > static int soft_noboot; > -static int debug; > > module_param(tmr_margin, int, 0); > module_param(tmr_atboot, int, 0); > module_param(nowayout, bool, 0); > module_param(soft_noboot, int, 0); > -module_param(debug, int, 0); > > MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" > __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")"); > @@ -100,7 +96,6 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, " > "0 to reboot (default 0)"); > -MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)"); > > /** > * struct s3c2410_wdt_variant - Per-variant config data > @@ -204,14 +199,6 @@ static const struct platform_device_id s3c2410_wdt_ids[] = { > }; > MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids); > > -/* watchdog control routines */ > - > -#define DBG(fmt, ...) \ > -do { \ > - if (debug) \ > - pr_info(fmt, ##__VA_ARGS__); \ > -} while (0) > - > /* functions */ > > static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock) > @@ -307,8 +294,8 @@ static int s3c2410wdt_start(struct watchdog_device *wdd) > wtcon |= S3C2410_WTCON_RSTEN; > } > > - DBG("%s: count=0x%08x, wtcon=%08lx\n", > - __func__, wdt->count, wtcon); > + dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n", > + wdt->count, wtcon); > > writel(wdt->count, wdt->reg_base + S3C2410_WTDAT); > writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); > @@ -337,8 +324,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou > freq = DIV_ROUND_UP(freq, 128); > count = timeout * freq; > > - DBG("%s: count=%d, timeout=%d, freq=%lu\n", > - __func__, count, timeout, freq); > + dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n", > + count, timeout, freq); > > /* if the count is bigger than the watchdog register, > then work out what we need to do (and if) we can > @@ -354,8 +341,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou > } > } > > - DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n", > - __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor)); > + dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n", > + timeout, divisor, count, DIV_ROUND_UP(count, divisor)); > > count = DIV_ROUND_UP(count, divisor); > wdt->count = count; > @@ -544,8 +531,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) > int started = 0; > int ret; > > - DBG("%s: probe=%p\n", __func__, pdev); > - > dev = &pdev->dev; > > wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); > @@ -581,8 +566,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) > goto err; > } > > - DBG("probe: mapped reg_base=%p\n", wdt->reg_base); > - > wdt->clock = devm_clk_get(dev, "watchdog"); > if (IS_ERR(wdt->clock)) { > dev_err(dev, "failed to find watchdog clock source\n"); > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 7db7847a005c..f7aad19d20ff 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -23,8 +23,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -83,13 +81,11 @@ static bool nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin; static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT; static int soft_noboot; -static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); module_param(nowayout, bool, 0); module_param(soft_noboot, int, 0); -module_param(debug, int, 0); MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")"); @@ -100,7 +96,6 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, " "0 to reboot (default 0)"); -MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)"); /** * struct s3c2410_wdt_variant - Per-variant config data @@ -204,14 +199,6 @@ static const struct platform_device_id s3c2410_wdt_ids[] = { }; MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids); -/* watchdog control routines */ - -#define DBG(fmt, ...) \ -do { \ - if (debug) \ - pr_info(fmt, ##__VA_ARGS__); \ -} while (0) - /* functions */ static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock) @@ -307,8 +294,8 @@ static int s3c2410wdt_start(struct watchdog_device *wdd) wtcon |= S3C2410_WTCON_RSTEN; } - DBG("%s: count=0x%08x, wtcon=%08lx\n", - __func__, wdt->count, wtcon); + dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n", + wdt->count, wtcon); writel(wdt->count, wdt->reg_base + S3C2410_WTDAT); writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); @@ -337,8 +324,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou freq = DIV_ROUND_UP(freq, 128); count = timeout * freq; - DBG("%s: count=%d, timeout=%d, freq=%lu\n", - __func__, count, timeout, freq); + dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n", + count, timeout, freq); /* if the count is bigger than the watchdog register, then work out what we need to do (and if) we can @@ -354,8 +341,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou } } - DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n", - __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor)); + dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n", + timeout, divisor, count, DIV_ROUND_UP(count, divisor)); count = DIV_ROUND_UP(count, divisor); wdt->count = count; @@ -544,8 +531,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) int started = 0; int ret; - DBG("%s: probe=%p\n", __func__, pdev); - dev = &pdev->dev; wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); @@ -581,8 +566,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) goto err; } - DBG("probe: mapped reg_base=%p\n", wdt->reg_base); - wdt->clock = devm_clk_get(dev, "watchdog"); if (IS_ERR(wdt->clock)) { dev_err(dev, "failed to find watchdog clock source\n");
Replace the 'debug' module parameter and pr_info() with proper device dynamic debug calls because this is the preferred and flexible way of enabling debugging printks. Also remove some obvious debug printks. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/watchdog/s3c2410_wdt.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-)