| Message ID | 92EBB4272BF81E4089A7126EC1E7B2846666A1D5@IRSMSX101.ger.corp.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On 2017-03-03 04:43, Patel, Mayurkumar wrote: > Hi Kaya > >> >> Hi Mayurkumar >> >> On 3/2/2017 11:05 AM, Patel, Mayurkumar wrote: >>>> >>>> Hi Bjorn, >>>> >>>> On 2/28/2017 1:57 PM, Patel, Mayurkumar wrote: >>>>>> I was trying to figure out when to use saved values vs. the values >>>>>> in >>>>>> registers by looking at the enable_cnt. >>>>>> enable_cnt is 0 during boot on my system. >>>>> enable_cnt for the root port on my system is set to 1 for "root >>>>> port" already without saving >>>>> any ASPM related settings. >>>>> >>>>> >>>> >>>> What would be the best way to figure out when to save power-on >>>> values from >>>> the registers? >>>> >>> >>> I can upload the diffs) because enable_cnt in pci_enable_device() can >>> be triggered >>> from multiple places at boot time so it might not be safe to use it? >> >> Go ahead and share your diff. It doesn't hurt to look at other >> alternatives. >> > > So basically, I introduced a new atomic variable to save the > aspm_policy for the first time. > Below is my diff. Thanks. Ok, i will incorporate your change and add your signoff, then repost the next version after testing next week. I am OoO until next week. > > diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c > index 3dd8bcb..c8e1e3a 100644 > --- a/drivers/pci/pcie/aspm.c > +++ b/drivers/pci/pcie/aspm.c > @@ -338,8 +338,9 @@ static void pcie_aspm_check_latency(struct pci_dev > *endpoint) > } > } > > -static void pcie_aspm_cap_init(struct pcie_link_state *link, int > blacklist) > +static void pcie_aspm_cap_init(struct pci_dev *pdev, int blacklist) > { > + struct pcie_link_state *link = pdev->link_state; > struct pci_dev *child, *parent = link->pdev; > struct pci_bus *linkbus = parent->subordinate; > struct aspm_register_info upreg, dwreg; > @@ -397,8 +398,21 @@ static void pcie_aspm_cap_init(struct > pcie_link_state *link, int blacklist) > link->latency_up.l1 = > calc_l1_latency(upreg.latency_encoding_l1); > link->latency_dw.l1 = > calc_l1_latency(dwreg.latency_encoding_l1); > > - /* Save default state */ > - link->aspm_default = link->aspm_enabled; > + /* > + * Save default state from FW when enabling ASPM for the first > time > + * during boot by looking at the calculated link->aspm_enabled > bits > + * above and aspm_enable_cnt will be zero. > + * > + * If this path is getting called for the second/third time > + * (aspm_enable_cnt will be non-zero). Assume that the current > state > + * of the ASPM registers may not necessarily match what FW > asked us to > + * do as in the case of hotplug insertion/removal. > + */ > + if (atomic_inc_return(&pdev->aspm_enable_cnt) == 1) > + pdev->aspm_default = link->aspm_default = > link->aspm_enabled; > + else > + link->aspm_default = pdev->aspm_default; > + > > /* Setup initial capable state. Will be updated later */ > link->aspm_capable = link->aspm_support; > @@ -606,7 +620,7 @@ void pcie_aspm_init_link_state(struct pci_dev > *pdev) > * upstream links also because capable state of them can be > * update through pcie_aspm_cap_init(). > */ > - pcie_aspm_cap_init(link, blacklist); > + pcie_aspm_cap_init(pdev, blacklist); > > /* Setup initial Clock PM state */ > pcie_clkpm_cap_init(link, blacklist); > diff --git a/include/linux/pci.h b/include/linux/pci.h > index e2d1a12..aa7bd7e 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -321,6 +321,8 @@ struct pci_dev { > > #ifdef CONFIG_PCIEASPM > struct pcie_link_state *link_state; /* ASPM link state */ > + unsigned int aspm_default; /* ASPM policy set by > BIOS */ > + atomic_t aspm_enable_cnt; /* ASPM policy > initialization */ -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 3dd8bcb..c8e1e3a 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -338,8 +338,9 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint) } } -static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) +static void pcie_aspm_cap_init(struct pci_dev *pdev, int blacklist) { + struct pcie_link_state *link = pdev->link_state; struct pci_dev *child, *parent = link->pdev; struct pci_bus *linkbus = parent->subordinate; struct aspm_register_info upreg, dwreg; @@ -397,8 +398,21 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1); link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1); - /* Save default state */ - link->aspm_default = link->aspm_enabled; + /* + * Save default state from FW when enabling ASPM for the first time + * during boot by looking at the calculated link->aspm_enabled bits + * above and aspm_enable_cnt will be zero. + * + * If this path is getting called for the second/third time + * (aspm_enable_cnt will be non-zero). Assume that the current state + * of the ASPM registers may not necessarily match what FW asked us to + * do as in the case of hotplug insertion/removal. + */ + if (atomic_inc_return(&pdev->aspm_enable_cnt) == 1) + pdev->aspm_default = link->aspm_default = link->aspm_enabled; + else + link->aspm_default = pdev->aspm_default; + /* Setup initial capable state. Will be updated later */ link->aspm_capable = link->aspm_support; @@ -606,7 +620,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) * upstream links also because capable state of them can be * update through pcie_aspm_cap_init(). */ - pcie_aspm_cap_init(link, blacklist); + pcie_aspm_cap_init(pdev, blacklist); /* Setup initial Clock PM state */ pcie_clkpm_cap_init(link, blacklist); diff --git a/include/linux/pci.h b/include/linux/pci.h index e2d1a12..aa7bd7e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -321,6 +321,8 @@ struct pci_dev { #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state */ + unsigned int aspm_default; /* ASPM policy set by BIOS */ + atomic_t aspm_enable_cnt; /* ASPM policy initialization */ #endif pci_channel_state_t error_state; /* current connectivity state */