| Message ID | 20170311213856.21701-3-krzk@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi Krzysztof, On 03/12/2017 03:08 AM, Krzysztof Kozlowski wrote: > The Exynos Power Management Unit (PMU) drivers contain quite large > static arrays of register values necessary for given Exynos SoC to enter > low power mode. All this data is useless for ARMv8 SoC like > Exynos5433, because the image will not be shared between ARMv7 and > ARMv8. > > Add additional Kconfig symbol for selecting the SoC-specific driver > addons thus skipping the useless data in the final image (this is > similar approach to chosen for Exynos clock controller drivers): > - exynos-pmu driver will be compiled on both architectures ARMv7 > and ARMv8, > - additional driver_data for ARMv7 SoCs will not be built on ARMv8 > and a macro will return NULL for them in of_device_id - this should > be safe as these compatibles cannot match on ARMv7 and driver > anyway handles NULL driver_data, > - on ARMv8 compile only exynos-pmu driver which exposes the > syscon-regmap for PMU address space. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > drivers/soc/samsung/Kconfig | 8 +++++++- > drivers/soc/samsung/Makefile | 4 +++- > drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ > drivers/soc/samsung/exynos-pmu.h | 3 +++ > 4 files changed, 29 insertions(+), 8 deletions(-) > > diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig > index 245533907d1b..8b25bd55e648 100644 > --- a/drivers/soc/samsung/Kconfig > +++ b/drivers/soc/samsung/Kconfig > @@ -8,7 +8,13 @@ if SOC_SAMSUNG > > config EXYNOS_PMU > bool "Exynos PMU controller driver" if COMPILE_TEST > - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) > + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) > + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS > + In general this patch look ok, but I was think we should make these configs configurable via _menuconfig_. Currently these are visible only if COMPILE_TEST is enabled. Recently I was working on adding PMU support for Exynos7 and I face issues when I want to disable this option and re-enable it for testing purpose. > +# There is no need to enable these drivers for ARMv8 > +config EXYNOS_PMU_ARM_DRIVERS > + bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST > + depends on EXYNOS_PMU > > config EXYNOS_PM_DOMAINS > bool "Exynos PM domains" if COMPILE_TEST > diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile > index 3619f2ecddaa..4d7694a4e7a4 100644 > --- a/drivers/soc/samsung/Makefile > +++ b/drivers/soc/samsung/Makefile > @@ -1,3 +1,5 @@ > -obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ > +obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o > + > +obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ > exynos5250-pmu.o exynos5420-pmu.o > obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o > diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c > index 56d9244ff981..bd4a76f27bc2 100644 > --- a/drivers/soc/samsung/exynos-pmu.c > +++ b/drivers/soc/samsung/exynos-pmu.c > @@ -69,27 +69,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) > } > > /* > + * Split the data between ARM architectures because it is relatively big > + * and useless on other arch. > + */ > +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS > +#define exynos_pmu_data_arm_ptr(data) (&data) > +#else > +#define exynos_pmu_data_arm_ptr(data) NULL > +#endif > + > +/* > * PMU platform driver and devicetree bindings. > */ > static const struct of_device_id exynos_pmu_of_device_ids[] = { > { > .compatible = "samsung,exynos3250-pmu", > - .data = &exynos3250_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data), > }, { > .compatible = "samsung,exynos4210-pmu", > - .data = &exynos4210_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data), > }, { > .compatible = "samsung,exynos4212-pmu", > - .data = &exynos4212_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data), > }, { > .compatible = "samsung,exynos4412-pmu", > - .data = &exynos4412_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data), > }, { > .compatible = "samsung,exynos5250-pmu", > - .data = &exynos5250_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data), > }, { > .compatible = "samsung,exynos5420-pmu", > - .data = &exynos5420_pmu_data, > + .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data), > }, { > .compatible = "samsung,exynos5433-pmu", So, as I understand, the idea here to use something like .data = &exynos5433_pmu_data or so in case ARMv8? > }, > diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h > index a469e366fead..40d4229abfb5 100644 > --- a/drivers/soc/samsung/exynos-pmu.h > +++ b/drivers/soc/samsung/exynos-pmu.h > @@ -31,6 +31,8 @@ struct exynos_pmu_data { > }; > > extern void __iomem *pmu_base_addr; > + > +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS > /* list of all exported SoC specific data */ > extern const struct exynos_pmu_data exynos3250_pmu_data; > extern const struct exynos_pmu_data exynos4210_pmu_data; > @@ -38,6 +40,7 @@ extern const struct exynos_pmu_data exynos4212_pmu_data; > extern const struct exynos_pmu_data exynos4412_pmu_data; > extern const struct exynos_pmu_data exynos5250_pmu_data; > extern const struct exynos_pmu_data exynos5420_pmu_data; > +#endif > > extern void pmu_raw_writel(u32 val, u32 offset); > extern u32 pmu_raw_readl(u32 offset); > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Mar 14, 2017 at 9:51 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: > Hi Krzysztof, > > On 03/12/2017 03:08 AM, Krzysztof Kozlowski wrote: >> The Exynos Power Management Unit (PMU) drivers contain quite large >> static arrays of register values necessary for given Exynos SoC to enter >> low power mode. All this data is useless for ARMv8 SoC like >> Exynos5433, because the image will not be shared between ARMv7 and >> ARMv8. >> >> Add additional Kconfig symbol for selecting the SoC-specific driver >> addons thus skipping the useless data in the final image (this is >> similar approach to chosen for Exynos clock controller drivers): >> - exynos-pmu driver will be compiled on both architectures ARMv7 >> and ARMv8, >> - additional driver_data for ARMv7 SoCs will not be built on ARMv8 >> and a macro will return NULL for them in of_device_id - this should >> be safe as these compatibles cannot match on ARMv7 and driver >> anyway handles NULL driver_data, >> - on ARMv8 compile only exynos-pmu driver which exposes the >> syscon-regmap for PMU address space. >> >> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> >> --- >> drivers/soc/samsung/Kconfig | 8 +++++++- >> drivers/soc/samsung/Makefile | 4 +++- >> drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ >> drivers/soc/samsung/exynos-pmu.h | 3 +++ >> 4 files changed, 29 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig >> index 245533907d1b..8b25bd55e648 100644 >> --- a/drivers/soc/samsung/Kconfig >> +++ b/drivers/soc/samsung/Kconfig >> @@ -8,7 +8,13 @@ if SOC_SAMSUNG >> >> config EXYNOS_PMU >> bool "Exynos PMU controller driver" if COMPILE_TEST >> - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) >> + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) >> + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS >> + > > In general this patch look ok, but I was think we should make these > configs configurable via _menuconfig_. Currently these are visible only > if COMPILE_TEST is enabled. > Recently I was working on adding PMU support for Exynos7 and I face > issues when I want to disable this option and re-enable it for testing > purpose. These drivers are not available in menuconfig on purpose - these are essential parts of SoC. Without them usually something will not work so user should not be able to disable them. For all of such drivers, we use the SELECT from mach approach. >> +# There is no need to enable these drivers for ARMv8 >> +config EXYNOS_PMU_ARM_DRIVERS >> + bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST >> + depends on EXYNOS_PMU >> >> config EXYNOS_PM_DOMAINS >> bool "Exynos PM domains" if COMPILE_TEST >> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile >> index 3619f2ecddaa..4d7694a4e7a4 100644 >> --- a/drivers/soc/samsung/Makefile >> +++ b/drivers/soc/samsung/Makefile >> @@ -1,3 +1,5 @@ >> -obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ >> +obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o >> + >> +obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ >> exynos5250-pmu.o exynos5420-pmu.o >> obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o >> diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c >> index 56d9244ff981..bd4a76f27bc2 100644 >> --- a/drivers/soc/samsung/exynos-pmu.c >> +++ b/drivers/soc/samsung/exynos-pmu.c >> @@ -69,27 +69,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) >> } >> >> /* >> + * Split the data between ARM architectures because it is relatively big >> + * and useless on other arch. >> + */ >> +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS >> +#define exynos_pmu_data_arm_ptr(data) (&data) >> +#else >> +#define exynos_pmu_data_arm_ptr(data) NULL >> +#endif >> + >> +/* >> * PMU platform driver and devicetree bindings. >> */ >> static const struct of_device_id exynos_pmu_of_device_ids[] = { >> { >> .compatible = "samsung,exynos3250-pmu", >> - .data = &exynos3250_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data), >> }, { >> .compatible = "samsung,exynos4210-pmu", >> - .data = &exynos4210_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data), >> }, { >> .compatible = "samsung,exynos4212-pmu", >> - .data = &exynos4212_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data), >> }, { >> .compatible = "samsung,exynos4412-pmu", >> - .data = &exynos4412_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data), >> }, { >> .compatible = "samsung,exynos5250-pmu", >> - .data = &exynos5250_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data), >> }, { >> .compatible = "samsung,exynos5420-pmu", >> - .data = &exynos5420_pmu_data, >> + .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data), >> }, { >> .compatible = "samsung,exynos5433-pmu", > So, as I understand, the idea here to use something like > .data = &exynos5433_pmu_data or so in case ARMv8? In the future, yes. Now there is no low power mode support for Exynos5433 so the data is left empty. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/14/2017 01:32 PM, Krzysztof Kozlowski wrote: > On Tue, Mar 14, 2017 at 9:51 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: >> Hi Krzysztof, >> >> On 03/12/2017 03:08 AM, Krzysztof Kozlowski wrote: >>> The Exynos Power Management Unit (PMU) drivers contain quite large >>> static arrays of register values necessary for given Exynos SoC to enter >>> low power mode. All this data is useless for ARMv8 SoC like >>> Exynos5433, because the image will not be shared between ARMv7 and >>> ARMv8. >>> >>> Add additional Kconfig symbol for selecting the SoC-specific driver >>> addons thus skipping the useless data in the final image (this is >>> similar approach to chosen for Exynos clock controller drivers): >>> - exynos-pmu driver will be compiled on both architectures ARMv7 >>> and ARMv8, >>> - additional driver_data for ARMv7 SoCs will not be built on ARMv8 >>> and a macro will return NULL for them in of_device_id - this should >>> be safe as these compatibles cannot match on ARMv7 and driver >>> anyway handles NULL driver_data, >>> - on ARMv8 compile only exynos-pmu driver which exposes the >>> syscon-regmap for PMU address space. >>> >>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> >>> --- >>> drivers/soc/samsung/Kconfig | 8 +++++++- >>> drivers/soc/samsung/Makefile | 4 +++- >>> drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ >>> drivers/soc/samsung/exynos-pmu.h | 3 +++ >>> 4 files changed, 29 insertions(+), 8 deletions(-) >>> >>> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig >>> index 245533907d1b..8b25bd55e648 100644 >>> --- a/drivers/soc/samsung/Kconfig >>> +++ b/drivers/soc/samsung/Kconfig >>> @@ -8,7 +8,13 @@ if SOC_SAMSUNG >>> >>> config EXYNOS_PMU >>> bool "Exynos PMU controller driver" if COMPILE_TEST >>> - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) >>> + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) >>> + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS >>> + >> >> In general this patch look ok, but I was think we should make these >> configs configurable via _menuconfig_. Currently these are visible only >> if COMPILE_TEST is enabled. >> Recently I was working on adding PMU support for Exynos7 and I face >> issues when I want to disable this option and re-enable it for testing >> purpose. > > These drivers are not available in menuconfig on purpose - these are > essential parts of SoC. Without them usually something will not work > so user should not be able to disable them. For all of such drivers, > we use the SELECT from mach approach. > Well, what you are saying is very subjective. In past I have face issues where to isolate or narrow down some issue, we do need to play with PMU and power domains. So, having a configurable option won't hurt here. Anyway if you (or anyone else) strongly feel we should be following "SELECT from MACH approach" then lets follow it. >>> +# There is no need to enable these drivers for ARMv8 >>> +config EXYNOS_PMU_ARM_DRIVERS >>> + bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST >>> + depends on EXYNOS_PMU >>> >>> config EXYNOS_PM_DOMAINS >>> bool "Exynos PM domains" if COMPILE_TEST >>> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile >>> index 3619f2ecddaa..4d7694a4e7a4 100644 >>> --- a/drivers/soc/samsung/Makefile >>> +++ b/drivers/soc/samsung/Makefile >>> @@ -1,3 +1,5 @@ >>> -obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ >>> +obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o >>> + >>> +obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ >>> exynos5250-pmu.o exynos5420-pmu.o >>> obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o >>> diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c >>> index 56d9244ff981..bd4a76f27bc2 100644 >>> --- a/drivers/soc/samsung/exynos-pmu.c >>> +++ b/drivers/soc/samsung/exynos-pmu.c >>> @@ -69,27 +69,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) >>> } >>> >>> /* >>> + * Split the data between ARM architectures because it is relatively big >>> + * and useless on other arch. >>> + */ >>> +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS >>> +#define exynos_pmu_data_arm_ptr(data) (&data) >>> +#else >>> +#define exynos_pmu_data_arm_ptr(data) NULL >>> +#endif >>> + >>> +/* >>> * PMU platform driver and devicetree bindings. >>> */ >>> static const struct of_device_id exynos_pmu_of_device_ids[] = { >>> { >>> .compatible = "samsung,exynos3250-pmu", >>> - .data = &exynos3250_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data), >>> }, { >>> .compatible = "samsung,exynos4210-pmu", >>> - .data = &exynos4210_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data), >>> }, { >>> .compatible = "samsung,exynos4212-pmu", >>> - .data = &exynos4212_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data), >>> }, { >>> .compatible = "samsung,exynos4412-pmu", >>> - .data = &exynos4412_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data), >>> }, { >>> .compatible = "samsung,exynos5250-pmu", >>> - .data = &exynos5250_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data), >>> }, { >>> .compatible = "samsung,exynos5420-pmu", >>> - .data = &exynos5420_pmu_data, >>> + .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data), >>> }, { >>> .compatible = "samsung,exynos5433-pmu", >> So, as I understand, the idea here to use something like >> .data = &exynos5433_pmu_data or so in case ARMv8? > > In the future, yes. Now there is no low power mode support for > Exynos5433 so the data is left empty. > Ok, this is fine. > Best regards, > Krzysztof > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Mar 14, 2017 at 10:40 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: > > > On 03/14/2017 01:32 PM, Krzysztof Kozlowski wrote: >> On Tue, Mar 14, 2017 at 9:51 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: >>> Hi Krzysztof, >>> >>> On 03/12/2017 03:08 AM, Krzysztof Kozlowski wrote: >>>> The Exynos Power Management Unit (PMU) drivers contain quite large >>>> static arrays of register values necessary for given Exynos SoC to enter >>>> low power mode. All this data is useless for ARMv8 SoC like >>>> Exynos5433, because the image will not be shared between ARMv7 and >>>> ARMv8. >>>> >>>> Add additional Kconfig symbol for selecting the SoC-specific driver >>>> addons thus skipping the useless data in the final image (this is >>>> similar approach to chosen for Exynos clock controller drivers): >>>> - exynos-pmu driver will be compiled on both architectures ARMv7 >>>> and ARMv8, >>>> - additional driver_data for ARMv7 SoCs will not be built on ARMv8 >>>> and a macro will return NULL for them in of_device_id - this should >>>> be safe as these compatibles cannot match on ARMv7 and driver >>>> anyway handles NULL driver_data, >>>> - on ARMv8 compile only exynos-pmu driver which exposes the >>>> syscon-regmap for PMU address space. >>>> >>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> >>>> --- >>>> drivers/soc/samsung/Kconfig | 8 +++++++- >>>> drivers/soc/samsung/Makefile | 4 +++- >>>> drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ >>>> drivers/soc/samsung/exynos-pmu.h | 3 +++ >>>> 4 files changed, 29 insertions(+), 8 deletions(-) >>>> >>>> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig >>>> index 245533907d1b..8b25bd55e648 100644 >>>> --- a/drivers/soc/samsung/Kconfig >>>> +++ b/drivers/soc/samsung/Kconfig >>>> @@ -8,7 +8,13 @@ if SOC_SAMSUNG >>>> >>>> config EXYNOS_PMU >>>> bool "Exynos PMU controller driver" if COMPILE_TEST >>>> - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) >>>> + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) >>>> + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS >>>> + >>> >>> In general this patch look ok, but I was think we should make these >>> configs configurable via _menuconfig_. Currently these are visible only >>> if COMPILE_TEST is enabled. >>> Recently I was working on adding PMU support for Exynos7 and I face >>> issues when I want to disable this option and re-enable it for testing >>> purpose. >> >> These drivers are not available in menuconfig on purpose - these are >> essential parts of SoC. Without them usually something will not work >> so user should not be able to disable them. For all of such drivers, >> we use the SELECT from mach approach. >> > Well, what you are saying is very subjective. In past I have face issues > where to isolate or narrow down some issue, we do need to play with PMU > and power domains. So, having a configurable option won't hurt here. > Anyway if you (or anyone else) strongly feel we should be following > "SELECT from MACH approach" then lets follow it. For ARMv7, in the past you could not do this. It behaved (almost) always the same as it is now. The PMU driver was being compiled in if ARCH_EXYNOS is selected. On ARMv8 - Exynos7 - there was no PMU driver so indeed this behavior changes. However PMU driver now is necessary for pinctrl (and actually for some others referring by syscon) so really you cannot disable it and expect things to work. Menuconfig serves such purpose - user (distro config developer) can choose what he wants but he wants to boot the kernel. People in general and people setting up configs for distro usually do not know all the subtle SoC submodule relations for all of the SoCs. That is our responsibility to provide them something which is usable. On the other hand, for debugging we always had to change some things. That's debugging. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday, March 11, 2017 11:38:55 PM Krzysztof Kozlowski wrote: > The Exynos Power Management Unit (PMU) drivers contain quite large > static arrays of register values necessary for given Exynos SoC to enter > low power mode. All this data is useless for ARMv8 SoC like > Exynos5433, because the image will not be shared between ARMv7 and > ARMv8. > > Add additional Kconfig symbol for selecting the SoC-specific driver > addons thus skipping the useless data in the final image (this is > similar approach to chosen for Exynos clock controller drivers): > - exynos-pmu driver will be compiled on both architectures ARMv7 > and ARMv8, > - additional driver_data for ARMv7 SoCs will not be built on ARMv8 > and a macro will return NULL for them in of_device_id - this should > be safe as these compatibles cannot match on ARMv7 and driver > anyway handles NULL driver_data, > - on ARMv8 compile only exynos-pmu driver which exposes the > syscon-regmap for PMU address space. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/14/2017 02:44 PM, Krzysztof Kozlowski wrote: > On Tue, Mar 14, 2017 at 10:40 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: >> >> >> On 03/14/2017 01:32 PM, Krzysztof Kozlowski wrote: >>> On Tue, Mar 14, 2017 at 9:51 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote: >>>> Hi Krzysztof, >>>> >>>> On 03/12/2017 03:08 AM, Krzysztof Kozlowski wrote: >>>>> The Exynos Power Management Unit (PMU) drivers contain quite large >>>>> static arrays of register values necessary for given Exynos SoC to enter >>>>> low power mode. All this data is useless for ARMv8 SoC like >>>>> Exynos5433, because the image will not be shared between ARMv7 and >>>>> ARMv8. >>>>> >>>>> Add additional Kconfig symbol for selecting the SoC-specific driver >>>>> addons thus skipping the useless data in the final image (this is >>>>> similar approach to chosen for Exynos clock controller drivers): >>>>> - exynos-pmu driver will be compiled on both architectures ARMv7 >>>>> and ARMv8, >>>>> - additional driver_data for ARMv7 SoCs will not be built on ARMv8 >>>>> and a macro will return NULL for them in of_device_id - this should >>>>> be safe as these compatibles cannot match on ARMv7 and driver >>>>> anyway handles NULL driver_data, >>>>> - on ARMv8 compile only exynos-pmu driver which exposes the >>>>> syscon-regmap for PMU address space. >>>>> >>>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> >>>>> --- >>>>> drivers/soc/samsung/Kconfig | 8 +++++++- >>>>> drivers/soc/samsung/Makefile | 4 +++- >>>>> drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ >>>>> drivers/soc/samsung/exynos-pmu.h | 3 +++ >>>>> 4 files changed, 29 insertions(+), 8 deletions(-) >>>>> >>>>> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig >>>>> index 245533907d1b..8b25bd55e648 100644 >>>>> --- a/drivers/soc/samsung/Kconfig >>>>> +++ b/drivers/soc/samsung/Kconfig >>>>> @@ -8,7 +8,13 @@ if SOC_SAMSUNG >>>>> >>>>> config EXYNOS_PMU >>>>> bool "Exynos PMU controller driver" if COMPILE_TEST >>>>> - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) >>>>> + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) >>>>> + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS >>>>> + >>>> >>>> In general this patch look ok, but I was think we should make these >>>> configs configurable via _menuconfig_. Currently these are visible only >>>> if COMPILE_TEST is enabled. >>>> Recently I was working on adding PMU support for Exynos7 and I face >>>> issues when I want to disable this option and re-enable it for testing >>>> purpose. >>> >>> These drivers are not available in menuconfig on purpose - these are >>> essential parts of SoC. Without them usually something will not work >>> so user should not be able to disable them. For all of such drivers, >>> we use the SELECT from mach approach. >>> >> Well, what you are saying is very subjective. In past I have face issues >> where to isolate or narrow down some issue, we do need to play with PMU >> and power domains. So, having a configurable option won't hurt here. >> Anyway if you (or anyone else) strongly feel we should be following >> "SELECT from MACH approach" then lets follow it. > > For ARMv7, in the past you could not do this. It behaved (almost) > always the same as it is now. The PMU driver was being compiled in if > ARCH_EXYNOS is selected. > > On ARMv8 - Exynos7 - there was no PMU driver so indeed this behavior > changes. However PMU driver now is necessary for pinctrl (and actually > for some others referring by syscon) so really you cannot disable it > and expect things to work. Menuconfig serves such purpose - user > (distro config developer) can choose what he wants but he wants to > boot the kernel. People in general and people setting up configs for > distro usually do not know all the subtle SoC submodule relations for > all of the SoCs. That is our responsibility to provide them something > which is usable. > > On the other hand, for debugging we always had to change some things. > That's debugging. > Ok, got it. Feel free to add Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > Best regards, > Krzysztof > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 245533907d1b..8b25bd55e648 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -8,7 +8,13 @@ if SOC_SAMSUNG config EXYNOS_PMU bool "Exynos PMU controller driver" if COMPILE_TEST - depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) + depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) + select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS + +# There is no need to enable these drivers for ARMv8 +config EXYNOS_PMU_ARM_DRIVERS + bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST + depends on EXYNOS_PMU config EXYNOS_PM_DOMAINS bool "Exynos PM domains" if COMPILE_TEST diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index 3619f2ecddaa..4d7694a4e7a4 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,3 +1,5 @@ -obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ +obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o + +obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ exynos5250-pmu.o exynos5420-pmu.o obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c index 56d9244ff981..bd4a76f27bc2 100644 --- a/drivers/soc/samsung/exynos-pmu.c +++ b/drivers/soc/samsung/exynos-pmu.c @@ -69,27 +69,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) } /* + * Split the data between ARM architectures because it is relatively big + * and useless on other arch. + */ +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS +#define exynos_pmu_data_arm_ptr(data) (&data) +#else +#define exynos_pmu_data_arm_ptr(data) NULL +#endif + +/* * PMU platform driver and devicetree bindings. */ static const struct of_device_id exynos_pmu_of_device_ids[] = { { .compatible = "samsung,exynos3250-pmu", - .data = &exynos3250_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data), }, { .compatible = "samsung,exynos4210-pmu", - .data = &exynos4210_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data), }, { .compatible = "samsung,exynos4212-pmu", - .data = &exynos4212_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data), }, { .compatible = "samsung,exynos4412-pmu", - .data = &exynos4412_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data), }, { .compatible = "samsung,exynos5250-pmu", - .data = &exynos5250_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data), }, { .compatible = "samsung,exynos5420-pmu", - .data = &exynos5420_pmu_data, + .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data), }, { .compatible = "samsung,exynos5433-pmu", }, diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h index a469e366fead..40d4229abfb5 100644 --- a/drivers/soc/samsung/exynos-pmu.h +++ b/drivers/soc/samsung/exynos-pmu.h @@ -31,6 +31,8 @@ struct exynos_pmu_data { }; extern void __iomem *pmu_base_addr; + +#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS /* list of all exported SoC specific data */ extern const struct exynos_pmu_data exynos3250_pmu_data; extern const struct exynos_pmu_data exynos4210_pmu_data; @@ -38,6 +40,7 @@ extern const struct exynos_pmu_data exynos4212_pmu_data; extern const struct exynos_pmu_data exynos4412_pmu_data; extern const struct exynos_pmu_data exynos5250_pmu_data; extern const struct exynos_pmu_data exynos5420_pmu_data; +#endif extern void pmu_raw_writel(u32 val, u32 offset); extern u32 pmu_raw_readl(u32 offset);
The Exynos Power Management Unit (PMU) drivers contain quite large static arrays of register values necessary for given Exynos SoC to enter low power mode. All this data is useless for ARMv8 SoC like Exynos5433, because the image will not be shared between ARMv7 and ARMv8. Add additional Kconfig symbol for selecting the SoC-specific driver addons thus skipping the useless data in the final image (this is similar approach to chosen for Exynos clock controller drivers): - exynos-pmu driver will be compiled on both architectures ARMv7 and ARMv8, - additional driver_data for ARMv7 SoCs will not be built on ARMv8 and a macro will return NULL for them in of_device_id - this should be safe as these compatibles cannot match on ARMv7 and driver anyway handles NULL driver_data, - on ARMv8 compile only exynos-pmu driver which exposes the syscon-regmap for PMU address space. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/soc/samsung/Kconfig | 8 +++++++- drivers/soc/samsung/Makefile | 4 +++- drivers/soc/samsung/exynos-pmu.c | 22 ++++++++++++++++------ drivers/soc/samsung/exynos-pmu.h | 3 +++ 4 files changed, 29 insertions(+), 8 deletions(-)