diff mbox

[v3] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock

Message ID 20170303141405.17581-1-robin@protonic.nl (mailing list archive)
State Accepted
Delegated to: Stephen Boyd
Headers show

Commit Message

Robin van der Gracht March 3, 2017, 2:14 p.m. UTC 
The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---
Fixed another title typo in v3

 drivers/clk/imx/clk-imx6ul.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Robin van der Gracht March 14, 2017, 10:55 a.m. UTC | #1 
On Fri,  3 Mar 2017 15:14:05 +0100
Robin van der Gracht <robin@protonic.nl> wrote:

> The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.
> 
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Robin van der Gracht <robin@protonic.nl>

Sasha or Shawn would you mind pushing this patch upstream?
I don't have a path.

Best regards,
Robin

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Shawn Guo March 15, 2017, 6:28 a.m. UTC | #2 
On Tue, Mar 14, 2017 at 11:55:14AM +0100, Robin van der Gracht wrote:
> On Fri,  3 Mar 2017 15:14:05 +0100
> Robin van der Gracht <robin@protonic.nl> wrote:
> 
> > The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.
> > 
> > Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> > Signed-off-by: Robin van der Gracht <robin@protonic.nl>
> 
> Sasha or Shawn would you mind pushing this patch upstream?
> I don't have a path.

I think Stephen will take care of it.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd April 7, 2017, 7:16 p.m. UTC | #3 
On 03/03, Robin van der Gracht wrote:
> The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.
> 
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
> ---

Applied to clk-next
diff mbox

Patch

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 75c35fb..dbd6e59 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -73,7 +73,7 @@  static struct clk *clks[IMX6UL_CLK_END];
 static struct clk_onecell_data clk_data;
 
 static int const clks_init_on[] __initconst = {
-	IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3,
+	IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2,
 	IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM,
 	IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG,
 };
@@ -341,9 +341,7 @@  static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_GPT2_SERIAL]	= imx_clk_gate2("gpt2_serial",	"perclk",	base + 0x68,	26);
 	clks[IMX6UL_CLK_UART2_IPG]	= imx_clk_gate2("uart2_ipg",	"ipg",		base + 0x68,	28);
 	clks[IMX6UL_CLK_UART2_SERIAL]	= imx_clk_gate2("uart2_serial",	"uart_podf",	base + 0x68,	28);
-	if (clk_on_imx6ul())
-		clks[IMX6UL_CLK_AIPSTZ3]	= imx_clk_gate2("aips_tz3",	"ahb",		base + 0x68,	30);
-	else if (clk_on_imx6ull())
+	if (clk_on_imx6ull())
 		clks[IMX6UL_CLK_AIPSTZ3]	= imx_clk_gate2("aips_tz3",	"ahb",		 base + 0x80,	18);
 
 	/* CCGR1 */
@@ -482,6 +480,9 @@  static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
+	if (clk_on_imx6ull())
+		clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]);
+
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]);