| Message ID | 20170314151811.17234-4-robdclark@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, Mar 14, 2017 at 11:18:05AM -0400, Rob Clark wrote: > Cc: devicetree@vger.kernel.org > Signed-off-by: Rob Clark <robdclark@gmail.com> > --- > .../devicetree/bindings/iommu/qcom,iommu.txt | 113 +++++++++++++++++++++ > 1 file changed, 113 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt > > diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt > new file mode 100644 > index 0000000..fd5b7fa > --- /dev/null > +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt > @@ -0,0 +1,113 @@ > +* QCOM IOMMU v1 Implementation > + > +Qualcomm "B" family devices which are not compatible with arm-smmu have > +a similar looking IOMMU but without access to the global register space, > +and optionally requiring additional configuration to route context irqs > +to non-secure vs secure interrupt line. > + > +** Required properties: > + > +- compatible : Should be one of: > + > + "qcom,msm8916-iommu" > + > +- clock-names : Should be a pair of "iface" (required for IOMMUs > + register group access) and "bus" (required for > + the IOMMUs underlying bus access). > +- clocks : Phandles for respective clocks described by > + clock-names. > +- #address-cells : must be 1. > +- #size-cells : must be 1. > +- #iommu-cells : Must be 1. > +- ranges : Base address and size of the iommu context banks. > +- qcom,iommu-secure-id : secure-id. > + > +- List of sub-nodes, one per translation context bank. Each sub-node > + has the following required properties: > + > + - compatible : Should be one of: > + - "qcom,msm-iommu-v1-ns" : non-secure context bank > + - "qcom,msm-iommu-v1-sec" : secure context bank > + - reg : Base address and size of context bank within the iommu > + - interrupts : The context fault irq. > + > +** Optional properties: > + > +- reg : Base address and size of the SMMU local base, should > + be only specified if the iommu requires configuration > + for routing of context bank irq's to secure vs non- > + secure lines. (Ie. if the iommu contains secure > + context banks) > + > + > +** Examples: > + > + apps_iommu: iommu@1e20000 { > + #address-cells = <1>; > + #size-cells = <1>; > + #iommu-cells = <1>; > + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; You didn't document the fallback above. Maybe just drop it if only a few chips have this iommu. > + ranges = <0 0x1e20000 0x40000>; > + reg = <0x1ef0000 0x3000>; When you have both reg and ranges, use reg value for the unit-address. > + clocks = <&gcc GCC_SMMU_CFG_CLK>, > + <&gcc GCC_APSS_TCU_CLK>; > + clock-names = "iface", "bus"; > + qcom,iommu-secure-id = <17>; > + > + // mdp_0: > + iommu-ctx@4000 { > + compatible = "qcom,msm-iommu-v1-ns"; > + reg = <0x4000 0x1000>; > + interrupts = <GIC_SPI 70 0>; > + }; > + > + // venus_ns: > + iommu-ctx@5000 { > + compatible = "qcom,msm-iommu-v1-sec"; > + reg = <0x5000 0x1000>; > + interrupts = <GIC_SPI 70 0>; > + }; > + }; > + > + gpu_iommu: iommu@1f08000 { > + #address-cells = <1>; > + #size-cells = <1>; > + #iommu-cells = <1>; > + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; > + ranges = <0 0x1f08000 0x10000>; > + clocks = <&gcc GCC_SMMU_CFG_CLK>, > + <&gcc GCC_GFX_TCU_CLK>; > + clock-names = "iface", "bus"; > + qcom,iommu-secure-id = <18>; > + > + // gfx3d_user: > + iommu-ctx@1f09000 { iommu-ctx@1000 > + compatible = "qcom,msm-iommu-v1-ns"; > + reg = <0x1000 0x1000>; > + interrupts = <GIC_SPI 241 0>; > + }; > + > + // gfx3d_priv: > + iommu-ctx@1f0a000 { iommu-ctx@2000 > + compatible = "qcom,msm-iommu-v1-ns"; > + reg = <0x2000 0x1000>; > + interrupts = <GIC_SPI 242 0>; > + }; > + }; > + > + ... > + > + venus: video-codec@1d00000 { > + ... > + iommus = <&apps_iommu 5>; > + }; > + > + mdp: mdp@1a01000 { > + ... > + iommus = <&apps_iommu 4>; > + }; > + > + gpu@01c00000 { > + ... > + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; > + }; > -- > 2.9.3 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Mar 23, 2017 at 6:21 PM, Rob Herring <robh@kernel.org> wrote: > On Tue, Mar 14, 2017 at 11:18:05AM -0400, Rob Clark wrote: >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Rob Clark <robdclark@gmail.com> >> --- >> .../devicetree/bindings/iommu/qcom,iommu.txt | 113 +++++++++++++++++++++ >> 1 file changed, 113 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt >> >> diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt >> new file mode 100644 >> index 0000000..fd5b7fa >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt >> @@ -0,0 +1,113 @@ >> +* QCOM IOMMU v1 Implementation >> + >> +Qualcomm "B" family devices which are not compatible with arm-smmu have >> +a similar looking IOMMU but without access to the global register space, >> +and optionally requiring additional configuration to route context irqs >> +to non-secure vs secure interrupt line. >> + >> +** Required properties: >> + >> +- compatible : Should be one of: >> + >> + "qcom,msm8916-iommu" >> + >> +- clock-names : Should be a pair of "iface" (required for IOMMUs >> + register group access) and "bus" (required for >> + the IOMMUs underlying bus access). >> +- clocks : Phandles for respective clocks described by >> + clock-names. >> +- #address-cells : must be 1. >> +- #size-cells : must be 1. >> +- #iommu-cells : Must be 1. >> +- ranges : Base address and size of the iommu context banks. >> +- qcom,iommu-secure-id : secure-id. >> + >> +- List of sub-nodes, one per translation context bank. Each sub-node >> + has the following required properties: >> + >> + - compatible : Should be one of: >> + - "qcom,msm-iommu-v1-ns" : non-secure context bank >> + - "qcom,msm-iommu-v1-sec" : secure context bank >> + - reg : Base address and size of context bank within the iommu >> + - interrupts : The context fault irq. >> + >> +** Optional properties: >> + >> +- reg : Base address and size of the SMMU local base, should >> + be only specified if the iommu requires configuration >> + for routing of context bank irq's to secure vs non- >> + secure lines. (Ie. if the iommu contains secure >> + context banks) >> + >> + >> +** Examples: >> + >> + apps_iommu: iommu@1e20000 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + #iommu-cells = <1>; >> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; > > You didn't document the fallback above. Maybe just drop it if only a few > chips have this iommu. not completely sure I understand what you want.. I think more than a few chips.. I suspect it is more like everything after the last "a" family devices (snapdragon 600?) and before 820.. (well, more or less at least a few years worth of devices, stuff that seems likely to be able to run an upstream kernel would be 800, 805, 808, 810.. and I guess there are some cut down 6xx and 4xx variants of those) I guess qcom_iommu wouldn't care about all the various 32b devices (since they aren't going to use 64b page tables).. 808/810, I'm not 100% sure about.. >> + ranges = <0 0x1e20000 0x40000>; >> + reg = <0x1ef0000 0x3000>; > > When you have both reg and ranges, use reg value for the unit-address. whoops, I thought I fixed that >> + clocks = <&gcc GCC_SMMU_CFG_CLK>, >> + <&gcc GCC_APSS_TCU_CLK>; >> + clock-names = "iface", "bus"; >> + qcom,iommu-secure-id = <17>; >> + >> + // mdp_0: >> + iommu-ctx@4000 { >> + compatible = "qcom,msm-iommu-v1-ns"; >> + reg = <0x4000 0x1000>; >> + interrupts = <GIC_SPI 70 0>; >> + }; >> + >> + // venus_ns: >> + iommu-ctx@5000 { >> + compatible = "qcom,msm-iommu-v1-sec"; >> + reg = <0x5000 0x1000>; >> + interrupts = <GIC_SPI 70 0>; >> + }; >> + }; >> + >> + gpu_iommu: iommu@1f08000 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + #iommu-cells = <1>; >> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; >> + ranges = <0 0x1f08000 0x10000>; >> + clocks = <&gcc GCC_SMMU_CFG_CLK>, >> + <&gcc GCC_GFX_TCU_CLK>; >> + clock-names = "iface", "bus"; >> + qcom,iommu-secure-id = <18>; >> + >> + // gfx3d_user: >> + iommu-ctx@1f09000 { > > iommu-ctx@1000 will fix, thx BR, -R >> + compatible = "qcom,msm-iommu-v1-ns"; >> + reg = <0x1000 0x1000>; >> + interrupts = <GIC_SPI 241 0>; >> + }; >> + >> + // gfx3d_priv: >> + iommu-ctx@1f0a000 { > > iommu-ctx@2000 > >> + compatible = "qcom,msm-iommu-v1-ns"; >> + reg = <0x2000 0x1000>; >> + interrupts = <GIC_SPI 242 0>; >> + }; >> + }; >> + >> + ... >> + >> + venus: video-codec@1d00000 { >> + ... >> + iommus = <&apps_iommu 5>; >> + }; >> + >> + mdp: mdp@1a01000 { >> + ... >> + iommus = <&apps_iommu 4>; >> + }; >> + >> + gpu@01c00000 { >> + ... >> + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; >> + }; >> -- >> 2.9.3 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Mar 23, 2017 at 9:45 PM, Rob Clark <robdclark@gmail.com> wrote: > On Thu, Mar 23, 2017 at 6:21 PM, Rob Herring <robh@kernel.org> wrote: >> On Tue, Mar 14, 2017 at 11:18:05AM -0400, Rob Clark wrote: >>> Cc: devicetree@vger.kernel.org >>> Signed-off-by: Rob Clark <robdclark@gmail.com> >>> --- >>> .../devicetree/bindings/iommu/qcom,iommu.txt | 113 +++++++++++++++++++++ >>> 1 file changed, 113 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt >>> >>> diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt >>> new file mode 100644 >>> index 0000000..fd5b7fa >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt >>> @@ -0,0 +1,113 @@ >>> +* QCOM IOMMU v1 Implementation >>> + >>> +Qualcomm "B" family devices which are not compatible with arm-smmu have >>> +a similar looking IOMMU but without access to the global register space, >>> +and optionally requiring additional configuration to route context irqs >>> +to non-secure vs secure interrupt line. >>> + >>> +** Required properties: >>> + >>> +- compatible : Should be one of: >>> + >>> + "qcom,msm8916-iommu" >>> + >>> +- clock-names : Should be a pair of "iface" (required for IOMMUs >>> + register group access) and "bus" (required for >>> + the IOMMUs underlying bus access). >>> +- clocks : Phandles for respective clocks described by >>> + clock-names. >>> +- #address-cells : must be 1. >>> +- #size-cells : must be 1. >>> +- #iommu-cells : Must be 1. >>> +- ranges : Base address and size of the iommu context banks. >>> +- qcom,iommu-secure-id : secure-id. >>> + >>> +- List of sub-nodes, one per translation context bank. Each sub-node >>> + has the following required properties: >>> + >>> + - compatible : Should be one of: >>> + - "qcom,msm-iommu-v1-ns" : non-secure context bank >>> + - "qcom,msm-iommu-v1-sec" : secure context bank >>> + - reg : Base address and size of context bank within the iommu >>> + - interrupts : The context fault irq. >>> + >>> +** Optional properties: >>> + >>> +- reg : Base address and size of the SMMU local base, should >>> + be only specified if the iommu requires configuration >>> + for routing of context bank irq's to secure vs non- >>> + secure lines. (Ie. if the iommu contains secure >>> + context banks) >>> + >>> + >>> +** Examples: >>> + >>> + apps_iommu: iommu@1e20000 { >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + #iommu-cells = <1>; >>> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; >> >> You didn't document the fallback above. Maybe just drop it if only a few >> chips have this iommu. > > not completely sure I understand what you want.. > > I think more than a few chips.. I suspect it is more like everything > after the last "a" family devices (snapdragon 600?) and before 820.. > (well, more or less at least a few years worth of devices, stuff that > seems likely to be able to run an upstream kernel would be 800, 805, > 808, 810.. and I guess there are some cut down 6xx and 4xx variants of > those) Okay, then you just need to list qcom,msm-iommu-v1 above. Something like 'followed by "qcom,msm-iommu-v1"' at the end of the list of compatibles. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt new file mode 100644 index 0000000..fd5b7fa --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -0,0 +1,113 @@ +* QCOM IOMMU v1 Implementation + +Qualcomm "B" family devices which are not compatible with arm-smmu have +a similar looking IOMMU but without access to the global register space, +and optionally requiring additional configuration to route context irqs +to non-secure vs secure interrupt line. + +** Required properties: + +- compatible : Should be one of: + + "qcom,msm8916-iommu" + +- clock-names : Should be a pair of "iface" (required for IOMMUs + register group access) and "bus" (required for + the IOMMUs underlying bus access). +- clocks : Phandles for respective clocks described by + clock-names. +- #address-cells : must be 1. +- #size-cells : must be 1. +- #iommu-cells : Must be 1. +- ranges : Base address and size of the iommu context banks. +- qcom,iommu-secure-id : secure-id. + +- List of sub-nodes, one per translation context bank. Each sub-node + has the following required properties: + + - compatible : Should be one of: + - "qcom,msm-iommu-v1-ns" : non-secure context bank + - "qcom,msm-iommu-v1-sec" : secure context bank + - reg : Base address and size of context bank within the iommu + - interrupts : The context fault irq. + +** Optional properties: + +- reg : Base address and size of the SMMU local base, should + be only specified if the iommu requires configuration + for routing of context bank irq's to secure vs non- + secure lines. (Ie. if the iommu contains secure + context banks) + + +** Examples: + + apps_iommu: iommu@1e20000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x40000>; + reg = <0x1ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 70 0>; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 70 0>; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1f09000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 0>; + }; + + // gfx3d_priv: + iommu-ctx@1f0a000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 0>; + }; + }; + + ... + + venus: video-codec@1d00000 { + ... + iommus = <&apps_iommu 5>; + }; + + mdp: mdp@1a01000 { + ... + iommus = <&apps_iommu 4>; + }; + + gpu@01c00000 { + ... + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + };
Cc: devicetree@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> --- .../devicetree/bindings/iommu/qcom,iommu.txt | 113 +++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt