diff mbox

[V6,4/7] mfd: da9061: MFD core support

Message ID 539b8756120ab3558c906f7457e65f94dbe37425.1490608293.git.stwiss.opensource@diasemi.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Steve Twiss March 27, 2017, 9:51 a.m. UTC
From: Steve Twiss <stwiss.opensource@diasemi.com>

MFD support for DA9061 is provided as part of the DA9062 device driver.

The registers header file adds two new chip variant IDs defined in DA9061
and DA9062 hardware. The core header file adds new software enumerations
for listing the valid DA9061 IRQs and a da9062_compatible_types enumeration
for distinguishing between DA9061/62 devices in software.

The core source code adds a new .compatible of_device_id entry. This is
extended from DA9062 to support both "dlg,da9061" and "dlg,da9062". The
.data entry now holds a reference to the enumerated device type.

A new regmap_irq_chip model is added for DA9061 and this supports the new
list of regmap_irq entries. A new mfd_cell da9061_devs[] array lists the
new sub system components for DA9061. Support is added for a new DA9061
regmap_config which lists the correct readable, writable and volatile
ranges for this chip.

The probe function uses the device tree compatible string to switch on the
da9062_compatible_types and configure the correct mfd cells, irq chip and
regmap config.
 
Kconfig is updated to reflect support for DA9061 and DA9062 PMICs.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>

---
Acked-for-mfd-by: Lee Jones <lee.jones@linaro.org>

Hi Lee, that Ack was from your earlier posting:
https://lkml.org/lkml/2017/1/4/328 this was
Regards, Steve.

This patch applies against linux-next and v4.11-rc3

v5 -> v6
 - Rebased from v4.9 to v4.11-rc3
 - Modify Copyright to match Dialog latest legal statement
 - Fixed "braces {} should be used on all arms" checkpatch warning

v4 -> v5
 - NO CODE CHANGE
 - Rebased from v4.8 to v4.9

v3 -> v4
 - Patch renamed from [PATCH V3 5/9] to [PATCH V4 4/8]
 - Removed DEFINE_RES_NAMED() macros for DA9061 resources and replaced
   them with DEFINE_RES_IRQ_NAMED().
 - Removed whitespace
 - Reverted change for badly defined mfd_cell da9062_devs of_compatible
   string from "dlg,da9062-watchdog" back to "dlg,da9062-wdt"

v2 -> v3
 - NO CODE CHANGE
 - Patch renamed from [PATCH V2 05/10] to [PATCH V3 5/9]

v1 -> v2
 - Patch renamed from [PATCH V1 01/10] to [PATCH V2 05/10] -- these
   changes were made to fix checkpatch warnings caused by the patch
   set dependency order
 - Fixed typo in the commit message "readble" to "readable"
 - Removed the explicit cross-check to decide if there is a conflict
   between the device tree compatible string and the hardware definition.
   This patch assumes the device tree is correctly written and therefore
   removes the need for a hardware/DT sanity check.
 - Removed extra semicolon in drivers/mfd/da9062-core.c:877
 - Re-write compatible entries into numerical order

Lee,

Changes as described in the version history above.

As previously:
This patch adds support for the DA9061 PMIC. This is done as part of the
existing DA9062 device driver by extending the of_device_id match table.
This in turn allows new MFD cells, irq chip and regmap definitions to
support DA9061.

Regards,
Steve Twiss, Dialog Semiconductor


 drivers/mfd/Kconfig                  |   5 +-
 drivers/mfd/da9062-core.c            | 427 +++++++++++++++++++++++++++++++++--
 include/linux/mfd/da9062/core.h      |  29 ++-
 include/linux/mfd/da9062/registers.h |   5 +-
 4 files changed, 443 insertions(+), 23 deletions(-)

Comments

kernel test robot March 27, 2017, 2:51 p.m. UTC | #1
Hi Steve,

[auto build test WARNING on ljones-mfd/for-mfd-next]
[also build test WARNING on v4.11-rc4 next-20170327]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Steve-Twiss/Documentation-devicetree-watchdog-da9062-61-watchdog-timer-binding/20170327-215359
base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
config: x86_64-randconfig-x009-201713 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All warnings (new ones prefixed by >>):

   drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
>> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
      chip->chip_type = (int)match->data;
                        ^

vim +845 drivers//mfd/da9062-core.c

   829		unsigned int irq_base;
   830		const struct mfd_cell *cell;
   831		const struct regmap_irq_chip *irq_chip;
   832		const struct regmap_config *config;
   833		int cell_num;
   834		int ret;
   835	
   836		chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
   837		if (!chip)
   838			return -ENOMEM;
   839	
   840		if (i2c->dev.of_node) {
   841			match = of_match_node(da9062_dt_ids, i2c->dev.of_node);
   842			if (!match)
   843				return -EINVAL;
   844	
 > 845			chip->chip_type = (int)match->data;
   846		} else {
   847			chip->chip_type = id->driver_data;
   848		}
   849	
   850		i2c_set_clientdata(i2c, chip);
   851		chip->dev = &i2c->dev;
   852	
   853		if (!i2c->irq) {

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Lee Jones March 28, 2017, 8:21 a.m. UTC | #2
On Mon, 27 Mar 2017, kbuild test robot wrote:

> Hi Steve,
> 
> [auto build test WARNING on ljones-mfd/for-mfd-next]
> [also build test WARNING on v4.11-rc4 next-20170327]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> 
> url:    https://github.com/0day-ci/linux/commits/Steve-Twiss/Documentation-devicetree-watchdog-da9062-61-watchdog-timer-binding/20170327-215359
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
> config: x86_64-randconfig-x009-201713 (attached as .config)
> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> reproduce:
>         # save the attached .config to linux build tree
>         make ARCH=x86_64 
> 
> All warnings (new ones prefixed by >>):
> 
>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>       chip->chip_type = (int)match->data;
>                         ^

Please use longs or enums.

> vim +845 drivers//mfd/da9062-core.c
> 
>    829		unsigned int irq_base;
>    830		const struct mfd_cell *cell;
>    831		const struct regmap_irq_chip *irq_chip;
>    832		const struct regmap_config *config;
>    833		int cell_num;
>    834		int ret;
>    835	
>    836		chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
>    837		if (!chip)
>    838			return -ENOMEM;
>    839	
>    840		if (i2c->dev.of_node) {
>    841			match = of_match_node(da9062_dt_ids, i2c->dev.of_node);
>    842			if (!match)
>    843				return -EINVAL;
>    844	
>  > 845			chip->chip_type = (int)match->data;
>    846		} else {
>    847			chip->chip_type = id->driver_data;
>    848		}
>    849	
>    850		i2c_set_clientdata(i2c, chip);
>    851		chip->dev = &i2c->dev;
>    852	
>    853		if (!i2c->irq) {
> 
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Geert Uytterhoeven March 28, 2017, 8:36 a.m. UTC | #3
Hi Lee,

On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:
>> [auto build test WARNING on ljones-mfd/for-mfd-next]
>> [also build test WARNING on v4.11-rc4 next-20170327]
>> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>>
>> url:    https://github.com/0day-ci/linux/commits/Steve-Twiss/Documentation-devicetree-watchdog-da9062-61-watchdog-timer-binding/20170327-215359
>> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
>> config: x86_64-randconfig-x009-201713 (attached as .config)
>> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
>> reproduce:
>>         # save the attached .config to linux build tree
>>         make ARCH=x86_64
>>
>> All warnings (new ones prefixed by >>):
>>
>>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
>> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>>       chip->chip_type = (int)match->data;
>>                        ^
>
> Please use longs or enums.

Enums would still give a warning on 64-bit.
The simple fix is change the cast from (int) to (uintptr_t).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Steve Twiss March 28, 2017, 10:42 a.m. UTC | #4
On 28 March 2017 09:37, Geert Uytterhoeven wrote:
> Subject: Re: [PATCH V6 4/7] mfd: da9061: MFD core support

> 

> Hi Lee,

> 

> On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:

> >> [auto build test WARNING on ljones-mfd/for-mfd-next]

> >> [also build test WARNING on v4.11-rc4 next-20170327]

> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next

> >> config: x86_64-randconfig-x009-201713 (attached as .config)

> >> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901

> >> reproduce:

> >>         # save the attached .config to linux build tree

> >>         make ARCH=x86_64

> >>

> >> All warnings (new ones prefixed by >>):

> >>

> >>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':

> >> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

> >>       chip->chip_type = (int)match->data;

> >>                        ^

> >

> > Please use longs or enums.

> 

> Enums would still give a warning on 64-bit.

> The simple fix is change the cast from (int) to (uintptr_t).


Hi Lee and Geert,

How about this? Fix by redefining the enum chip_type to be an int.
Then, just use substitution:
#define COMPAT_TYPE_DA9061  1
#define COMPAT_TYPE_DA9062  2

That would be simple.
Are there any reasons this would not be acceptable?

Regards,
Steve
Geert Uytterhoeven March 28, 2017, 10:50 a.m. UTC | #5
Hi Steve,

On Tue, Mar 28, 2017 at 12:42 PM, Steve Twiss
<stwiss.opensource@diasemi.com> wrote:
> On 28 March 2017 09:37, Geert Uytterhoeven wrote:
>> Subject: Re: [PATCH V6 4/7] mfd: da9061: MFD core support
>> On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:
>> >> [auto build test WARNING on ljones-mfd/for-mfd-next]
>> >> [also build test WARNING on v4.11-rc4 next-20170327]
>> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
>> >> config: x86_64-randconfig-x009-201713 (attached as .config)
>> >> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
>> >> reproduce:
>> >>         # save the attached .config to linux build tree
>> >>         make ARCH=x86_64
>> >>
>> >> All warnings (new ones prefixed by >>):
>> >>
>> >>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
>> >> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>> >>       chip->chip_type = (int)match->data;
>> >>                        ^
>> >
>> > Please use longs or enums.
>>
>> Enums would still give a warning on 64-bit.
>> The simple fix is change the cast from (int) to (uintptr_t).
>
> Hi Lee and Geert,
>
> How about this? Fix by redefining the enum chip_type to be an int.
> Then, just use substitution:
> #define COMPAT_TYPE_DA9061  1
> #define COMPAT_TYPE_DA9062  2
>
> That would be simple.
> Are there any reasons this would not be acceptable?

I don't see how that can help.
The warning is caused by casting the "void *" (which is either 32-bit or
64-bit) in of_device_if.data to an integer or enum (which is always 32-bit).

The right fix is to cast it to uintptr_t intead of int, like other drivers do.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Steve Twiss March 28, 2017, 11:24 a.m. UTC | #6
On 28 March 2017 11:51, Geert Uytterhoeven wrote:
> Hi Steve,

> 

> On Tue, Mar 28, 2017 at 12:42 PM, Steve Twiss wrote:

> > On 28 March 2017 09:37, Geert Uytterhoeven wrote:

> >> Subject: Re: [PATCH V6 4/7] mfd: da9061: MFD core support

> >> On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:

> >> >> [auto build test WARNING on ljones-mfd/for-mfd-next]

> >> >> [also build test WARNING on v4.11-rc4 next-20170327]

> >> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next

> >> >> config: x86_64-randconfig-x009-201713 (attached as .config)

> >> >> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901

> >> >> reproduce:

> >> >>         # save the attached .config to linux build tree

> >> >>         make ARCH=x86_64

> >> >>

> >> >> All warnings (new ones prefixed by >>):

> >> >>

> >> >>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':

> >> >> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

> >> >>       chip->chip_type = (int)match->data;

> >> >>                        ^

> >> >

> >> > Please use longs or enums.

> >>

> >> Enums would still give a warning on 64-bit.

> >> The simple fix is change the cast from (int) to (uintptr_t).

> >

> > Hi Lee and Geert,

> >

> > How about this? Fix by redefining the enum chip_type to be an int.

> > Then, just use substitution:

> > #define COMPAT_TYPE_DA9061  1

> > #define COMPAT_TYPE_DA9062  2

> >

> > That would be simple.

> > Are there any reasons this would not be acceptable?

> 

> I don't see how that can help.

> The warning is caused by casting the "void *" (which is either 32-bit or

> 64-bit) in of_device_if.data to an integer or enum (which is always 32-bit).

> 

> The right fix is to cast it to uintptr_t intead of int, like other drivers do.


Thanks Geert,
Um. Of course. Thanks, and my apologies. It would have helped if I had compile tested the right file  :(
I'll follow the convention and cast (uintptr_t).
Thanks,
Steve
Lee Jones March 29, 2017, 8:30 a.m. UTC | #7
On Tue, 28 Mar 2017, Geert Uytterhoeven wrote:

> Hi Steve,
> 
> On Tue, Mar 28, 2017 at 12:42 PM, Steve Twiss
> <stwiss.opensource@diasemi.com> wrote:
> > On 28 March 2017 09:37, Geert Uytterhoeven wrote:
> >> Subject: Re: [PATCH V6 4/7] mfd: da9061: MFD core support
> >> On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:
> >> >> [auto build test WARNING on ljones-mfd/for-mfd-next]
> >> >> [also build test WARNING on v4.11-rc4 next-20170327]
> >> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
> >> >> config: x86_64-randconfig-x009-201713 (attached as .config)
> >> >> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> >> >> reproduce:
> >> >>         # save the attached .config to linux build tree
> >> >>         make ARCH=x86_64
> >> >>
> >> >> All warnings (new ones prefixed by >>):
> >> >>
> >> >>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
> >> >> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
> >> >>       chip->chip_type = (int)match->data;
> >> >>                        ^
> >> >
> >> > Please use longs or enums.
> >>
> >> Enums would still give a warning on 64-bit.
> >> The simple fix is change the cast from (int) to (uintptr_t).
> >
> > Hi Lee and Geert,
> >
> > How about this? Fix by redefining the enum chip_type to be an int.
> > Then, just use substitution:
> > #define COMPAT_TYPE_DA9061  1
> > #define COMPAT_TYPE_DA9062  2
> >
> > That would be simple.
> > Are there any reasons this would not be acceptable?
> 
> I don't see how that can help.
> The warning is caused by casting the "void *" (which is either 32-bit or
> 64-bit) in of_device_if.data to an integer or enum (which is always 32-bit).
> 
> The right fix is to cast it to uintptr_t intead of int, like other drivers do.

That's a hack though, isn't it?  chip->chip_type is not of type
uintptr_t, so all you're doing here is making the compiler happy.

I see people using (int)(uintptr_t), which I guess keeps the
compiler happy in the first instance and actually culminates in a
correct cast to the right type.

So how about something like (enum da9062_compatible_types)(long)?
Geert Uytterhoeven March 29, 2017, 9:12 a.m. UTC | #8
Hi Lee,

On Wed, Mar 29, 2017 at 10:30 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Tue, 28 Mar 2017, Geert Uytterhoeven wrote:
>> On Tue, Mar 28, 2017 at 12:42 PM, Steve Twiss
>> <stwiss.opensource@diasemi.com> wrote:
>> > On 28 March 2017 09:37, Geert Uytterhoeven wrote:
>> >> Subject: Re: [PATCH V6 4/7] mfd: da9061: MFD core support
>> >> On Tue, Mar 28, 2017 at 10:21 AM, Lee Jones <lee.jones@linaro.org> wrote:
>> >> >> [auto build test WARNING on ljones-mfd/for-mfd-next]
>> >> >> [also build test WARNING on v4.11-rc4 next-20170327]
>> >> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
>> >> >> config: x86_64-randconfig-x009-201713 (attached as .config)
>> >> >> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
>> >> >> reproduce:
>> >> >>         # save the attached .config to linux build tree
>> >> >>         make ARCH=x86_64
>> >> >>
>> >> >> All warnings (new ones prefixed by >>):
>> >> >>
>> >> >>    drivers//mfd/da9062-core.c: In function 'da9062_i2c_probe':
>> >> >> >> drivers//mfd/da9062-core.c:845:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>> >> >>       chip->chip_type = (int)match->data;
>> >> >>                        ^
>> >> >
>> >> > Please use longs or enums.
>> >>
>> >> Enums would still give a warning on 64-bit.
>> >> The simple fix is change the cast from (int) to (uintptr_t).
>> >
>> > Hi Lee and Geert,
>> >
>> > How about this? Fix by redefining the enum chip_type to be an int.
>> > Then, just use substitution:
>> > #define COMPAT_TYPE_DA9061  1
>> > #define COMPAT_TYPE_DA9062  2
>> >
>> > That would be simple.
>> > Are there any reasons this would not be acceptable?
>>
>> I don't see how that can help.
>> The warning is caused by casting the "void *" (which is either 32-bit or
>> 64-bit) in of_device_if.data to an integer or enum (which is always 32-bit).
>>
>> The right fix is to cast it to uintptr_t intead of int, like other drivers do.
>
> That's a hack though, isn't it?  chip->chip_type is not of type
> uintptr_t, so all you're doing here is making the compiler happy.

It's a hack, in the sense that using casts is usually a hack :-)
(I would love for C to have casts you can easily grep for, like C++ has)

In this case, it's not really a hack, as the void * is intended to store
arbitrary data, both pointers and integers.

> I see people using (int)(uintptr_t), which I guess keeps the
> compiler happy in the first instance and actually culminates in a
> correct cast to the right type.

The cast to int isn't really needed.

> So how about something like (enum da9062_compatible_types)(long)?

"uintptr_t" is the proper C standard type for conversion between pointers and
integers.  The cast to the enum isn't really needed, so I'd remove it (the
less number of casts, the better!).

Long is the hack that works on ILP32 and LP64 platforms only ;-)

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb..29cc11a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -263,13 +263,14 @@  config MFD_DA9055
 	  called "da9055"
 
 config MFD_DA9062
-	tristate "Dialog Semiconductor DA9062 PMIC Support"
+	tristate "Dialog Semiconductor DA9062/61 PMIC Support"
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	depends on I2C
 	help
-	  Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
+	  Say yes here for support for the Dialog Semiconductor DA9061 and
+	  DA9062 PMICs.
 	  This includes the I2C driver and core APIs.
 	  Additional drivers must be enabled in order to use the functionality
 	  of the device.
diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index 8f873866..9310eaf 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -1,6 +1,6 @@ 
 /*
- * Core, IRQ and I2C device driver for DA9062 PMIC
- * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ * Core, IRQ and I2C device driver for DA9061 and DA9062 PMICs
+ * Copyright (C) 2015-2017  Dialog Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -30,6 +30,70 @@ 
 #define	DA9062_REG_EVENT_B_OFFSET	1
 #define	DA9062_REG_EVENT_C_OFFSET	2
 
+static struct regmap_irq da9061_irqs[] = {
+	/* EVENT A */
+	[DA9061_IRQ_ONKEY] = {
+		.reg_offset = DA9062_REG_EVENT_A_OFFSET,
+		.mask = DA9062AA_M_NONKEY_MASK,
+	},
+	[DA9061_IRQ_WDG_WARN] = {
+		.reg_offset = DA9062_REG_EVENT_A_OFFSET,
+		.mask = DA9062AA_M_WDG_WARN_MASK,
+	},
+	[DA9061_IRQ_SEQ_RDY] = {
+		.reg_offset = DA9062_REG_EVENT_A_OFFSET,
+		.mask = DA9062AA_M_SEQ_RDY_MASK,
+	},
+	/* EVENT B */
+	[DA9061_IRQ_TEMP] = {
+		.reg_offset = DA9062_REG_EVENT_B_OFFSET,
+		.mask = DA9062AA_M_TEMP_MASK,
+	},
+	[DA9061_IRQ_LDO_LIM] = {
+		.reg_offset = DA9062_REG_EVENT_B_OFFSET,
+		.mask = DA9062AA_M_LDO_LIM_MASK,
+	},
+	[DA9061_IRQ_DVC_RDY] = {
+		.reg_offset = DA9062_REG_EVENT_B_OFFSET,
+		.mask = DA9062AA_M_DVC_RDY_MASK,
+	},
+	[DA9061_IRQ_VDD_WARN] = {
+		.reg_offset = DA9062_REG_EVENT_B_OFFSET,
+		.mask = DA9062AA_M_VDD_WARN_MASK,
+	},
+	/* EVENT C */
+	[DA9061_IRQ_GPI0] = {
+		.reg_offset = DA9062_REG_EVENT_C_OFFSET,
+		.mask = DA9062AA_M_GPI0_MASK,
+	},
+	[DA9061_IRQ_GPI1] = {
+		.reg_offset = DA9062_REG_EVENT_C_OFFSET,
+		.mask = DA9062AA_M_GPI1_MASK,
+	},
+	[DA9061_IRQ_GPI2] = {
+		.reg_offset = DA9062_REG_EVENT_C_OFFSET,
+		.mask = DA9062AA_M_GPI2_MASK,
+	},
+	[DA9061_IRQ_GPI3] = {
+		.reg_offset = DA9062_REG_EVENT_C_OFFSET,
+		.mask = DA9062AA_M_GPI3_MASK,
+	},
+	[DA9061_IRQ_GPI4] = {
+		.reg_offset = DA9062_REG_EVENT_C_OFFSET,
+		.mask = DA9062AA_M_GPI4_MASK,
+	},
+};
+
+static struct regmap_irq_chip da9061_irq_chip = {
+	.name = "da9061-irq",
+	.irqs = da9061_irqs,
+	.num_irqs = DA9061_NUM_IRQ,
+	.num_regs = 3,
+	.status_base = DA9062AA_EVENT_A,
+	.mask_base = DA9062AA_IRQ_MASK_A,
+	.ack_base = DA9062AA_EVENT_A,
+};
+
 static struct regmap_irq da9062_irqs[] = {
 	/* EVENT A */
 	[DA9062_IRQ_ONKEY] = {
@@ -102,6 +166,57 @@ 
 	.ack_base = DA9062AA_EVENT_A,
 };
 
+static struct resource da9061_core_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9061_IRQ_VDD_WARN, "VDD_WARN"),
+};
+
+static struct resource da9061_regulators_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9061_IRQ_LDO_LIM, "LDO_LIM"),
+};
+
+static struct resource da9061_thermal_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9061_IRQ_TEMP, "THERMAL"),
+};
+
+static struct resource da9061_wdt_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9061_IRQ_WDG_WARN, "WD_WARN"),
+};
+
+static struct resource da9061_onkey_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9061_IRQ_ONKEY, "ONKEY"),
+};
+
+static const struct mfd_cell da9061_devs[] = {
+	{
+		.name		= "da9061-core",
+		.num_resources	= ARRAY_SIZE(da9061_core_resources),
+		.resources	= da9061_core_resources,
+	},
+	{
+		.name		= "da9062-regulators",
+		.num_resources	= ARRAY_SIZE(da9061_regulators_resources),
+		.resources	= da9061_regulators_resources,
+	},
+	{
+		.name		= "da9061-watchdog",
+		.num_resources	= ARRAY_SIZE(da9061_wdt_resources),
+		.resources	= da9061_wdt_resources,
+		.of_compatible  = "dlg,da9061-watchdog",
+	},
+	{
+		.name		= "da9061-thermal",
+		.num_resources	= ARRAY_SIZE(da9061_thermal_resources),
+		.resources	= da9061_thermal_resources,
+		.of_compatible  = "dlg,da9061-thermal",
+	},
+	{
+		.name		= "da9061-onkey",
+		.num_resources	= ARRAY_SIZE(da9061_onkey_resources),
+		.resources	= da9061_onkey_resources,
+		.of_compatible = "dlg,da9061-onkey",
+	},
+};
+
 static struct resource da9062_core_resources[] = {
 	DEFINE_RES_NAMED(DA9062_IRQ_VDD_WARN, 1, "VDD_WARN", IORESOURCE_IRQ),
 };
@@ -200,7 +315,8 @@  static int da9062_clear_fault_log(struct da9062 *chip)
 
 static int da9062_get_device_type(struct da9062 *chip)
 {
-	int device_id, variant_id, variant_mrc;
+	int device_id, variant_id, variant_mrc, variant_vrc;
+	char *type;
 	int ret;
 
 	ret = regmap_read(chip->regmap, DA9062AA_DEVICE_ID, &device_id);
@@ -219,9 +335,23 @@  static int da9062_get_device_type(struct da9062 *chip)
 		return -EIO;
 	}
 
+	variant_vrc = (variant_id & DA9062AA_VRC_MASK) >> DA9062AA_VRC_SHIFT;
+
+	switch (variant_vrc) {
+	case DA9062_PMIC_VARIANT_VRC_DA9061:
+		type = "DA9061";
+		break;
+	case DA9062_PMIC_VARIANT_VRC_DA9062:
+		type = "DA9062";
+		break;
+	default:
+		type = "Unknown";
+		break;
+	}
+
 	dev_info(chip->dev,
-		 "Device detected (device-ID: 0x%02X, var-ID: 0x%02X)\n",
-		 device_id, variant_id);
+		 "Device detected (device-ID: 0x%02X, var-ID: 0x%02X, %s)\n",
+		 device_id, variant_id, type);
 
 	variant_mrc = (variant_id & DA9062AA_MRC_MASK) >> DA9062AA_MRC_SHIFT;
 
@@ -234,6 +364,234 @@  static int da9062_get_device_type(struct da9062 *chip)
 	return ret;
 }
 
+static const struct regmap_range da9061_aa_readable_ranges[] = {
+	{
+		.range_min = DA9062AA_PAGE_CON,
+		.range_max = DA9062AA_STATUS_B,
+	}, {
+		.range_min = DA9062AA_STATUS_D,
+		.range_max = DA9062AA_EVENT_C,
+	}, {
+		.range_min = DA9062AA_IRQ_MASK_A,
+		.range_max = DA9062AA_IRQ_MASK_C,
+	}, {
+		.range_min = DA9062AA_CONTROL_A,
+		.range_max = DA9062AA_GPIO_4,
+	}, {
+		.range_min = DA9062AA_GPIO_WKUP_MODE,
+		.range_max = DA9062AA_GPIO_OUT3_4,
+	}, {
+		.range_min = DA9062AA_BUCK1_CONT,
+		.range_max = DA9062AA_BUCK4_CONT,
+	}, {
+		.range_min = DA9062AA_BUCK3_CONT,
+		.range_max = DA9062AA_BUCK3_CONT,
+	}, {
+		.range_min = DA9062AA_LDO1_CONT,
+		.range_max = DA9062AA_LDO4_CONT,
+	}, {
+		.range_min = DA9062AA_DVC_1,
+		.range_max = DA9062AA_DVC_1,
+	}, {
+		.range_min = DA9062AA_SEQ,
+		.range_max = DA9062AA_ID_4_3,
+	}, {
+		.range_min = DA9062AA_ID_12_11,
+		.range_max = DA9062AA_ID_16_15,
+	}, {
+		.range_min = DA9062AA_ID_22_21,
+		.range_max = DA9062AA_ID_32_31,
+	}, {
+		.range_min = DA9062AA_SEQ_A,
+		.range_max = DA9062AA_WAIT,
+	}, {
+		.range_min = DA9062AA_RESET,
+		.range_max = DA9062AA_BUCK_ILIM_C,
+	}, {
+		.range_min = DA9062AA_BUCK1_CFG,
+		.range_max = DA9062AA_BUCK3_CFG,
+	}, {
+		.range_min = DA9062AA_VBUCK1_A,
+		.range_max = DA9062AA_VBUCK4_A,
+	}, {
+		.range_min = DA9062AA_VBUCK3_A,
+		.range_max = DA9062AA_VBUCK3_A,
+	}, {
+		.range_min = DA9062AA_VLDO1_A,
+		.range_max = DA9062AA_VLDO4_A,
+	}, {
+		.range_min = DA9062AA_VBUCK1_B,
+		.range_max = DA9062AA_VBUCK4_B,
+	}, {
+		.range_min = DA9062AA_VBUCK3_B,
+		.range_max = DA9062AA_VBUCK3_B,
+	}, {
+		.range_min = DA9062AA_VLDO1_B,
+		.range_max = DA9062AA_VLDO4_B,
+	}, {
+		.range_min = DA9062AA_BBAT_CONT,
+		.range_max = DA9062AA_BBAT_CONT,
+	}, {
+		.range_min = DA9062AA_INTERFACE,
+		.range_max = DA9062AA_CONFIG_E,
+	}, {
+		.range_min = DA9062AA_CONFIG_G,
+		.range_max = DA9062AA_CONFIG_K,
+	}, {
+		.range_min = DA9062AA_CONFIG_M,
+		.range_max = DA9062AA_CONFIG_M,
+	}, {
+		.range_min = DA9062AA_GP_ID_0,
+		.range_max = DA9062AA_GP_ID_19,
+	}, {
+		.range_min = DA9062AA_DEVICE_ID,
+		.range_max = DA9062AA_CONFIG_ID,
+	},
+};
+
+static const struct regmap_range da9061_aa_writeable_ranges[] = {
+	{
+		.range_min = DA9062AA_PAGE_CON,
+		.range_max = DA9062AA_PAGE_CON,
+	}, {
+		.range_min = DA9062AA_FAULT_LOG,
+		.range_max = DA9062AA_EVENT_C,
+	}, {
+		.range_min = DA9062AA_IRQ_MASK_A,
+		.range_max = DA9062AA_IRQ_MASK_C,
+	}, {
+		.range_min = DA9062AA_CONTROL_A,
+		.range_max = DA9062AA_GPIO_4,
+	}, {
+		.range_min = DA9062AA_GPIO_WKUP_MODE,
+		.range_max = DA9062AA_GPIO_OUT3_4,
+	}, {
+		.range_min = DA9062AA_BUCK1_CONT,
+		.range_max = DA9062AA_BUCK4_CONT,
+	}, {
+		.range_min = DA9062AA_BUCK3_CONT,
+		.range_max = DA9062AA_BUCK3_CONT,
+	}, {
+		.range_min = DA9062AA_LDO1_CONT,
+		.range_max = DA9062AA_LDO4_CONT,
+	}, {
+		.range_min = DA9062AA_DVC_1,
+		.range_max = DA9062AA_DVC_1,
+	}, {
+		.range_min = DA9062AA_SEQ,
+		.range_max = DA9062AA_ID_4_3,
+	}, {
+		.range_min = DA9062AA_ID_12_11,
+		.range_max = DA9062AA_ID_16_15,
+	}, {
+		.range_min = DA9062AA_ID_22_21,
+		.range_max = DA9062AA_ID_32_31,
+	}, {
+		.range_min = DA9062AA_SEQ_A,
+		.range_max = DA9062AA_WAIT,
+	}, {
+		.range_min = DA9062AA_RESET,
+		.range_max = DA9062AA_BUCK_ILIM_C,
+	}, {
+		.range_min = DA9062AA_BUCK1_CFG,
+		.range_max = DA9062AA_BUCK3_CFG,
+	}, {
+		.range_min = DA9062AA_VBUCK1_A,
+		.range_max = DA9062AA_VBUCK4_A,
+	}, {
+		.range_min = DA9062AA_VBUCK3_A,
+		.range_max = DA9062AA_VBUCK3_A,
+	}, {
+		.range_min = DA9062AA_VLDO1_A,
+		.range_max = DA9062AA_VLDO4_A,
+	}, {
+		.range_min = DA9062AA_VBUCK1_B,
+		.range_max = DA9062AA_VBUCK4_B,
+	}, {
+		.range_min = DA9062AA_VBUCK3_B,
+		.range_max = DA9062AA_VBUCK3_B,
+	}, {
+		.range_min = DA9062AA_VLDO1_B,
+		.range_max = DA9062AA_VLDO4_B,
+	}, {
+		.range_min = DA9062AA_BBAT_CONT,
+		.range_max = DA9062AA_BBAT_CONT,
+	}, {
+		.range_min = DA9062AA_GP_ID_0,
+		.range_max = DA9062AA_GP_ID_19,
+	},
+};
+
+static const struct regmap_range da9061_aa_volatile_ranges[] = {
+	{
+		.range_min = DA9062AA_PAGE_CON,
+		.range_max = DA9062AA_STATUS_B,
+	}, {
+		.range_min = DA9062AA_STATUS_D,
+		.range_max = DA9062AA_EVENT_C,
+	}, {
+		.range_min = DA9062AA_CONTROL_A,
+		.range_max = DA9062AA_CONTROL_B,
+	}, {
+		.range_min = DA9062AA_CONTROL_E,
+		.range_max = DA9062AA_CONTROL_F,
+	}, {
+		.range_min = DA9062AA_BUCK1_CONT,
+		.range_max = DA9062AA_BUCK4_CONT,
+	}, {
+		.range_min = DA9062AA_BUCK3_CONT,
+		.range_max = DA9062AA_BUCK3_CONT,
+	}, {
+		.range_min = DA9062AA_LDO1_CONT,
+		.range_max = DA9062AA_LDO4_CONT,
+	}, {
+		.range_min = DA9062AA_DVC_1,
+		.range_max = DA9062AA_DVC_1,
+	}, {
+		.range_min = DA9062AA_SEQ,
+		.range_max = DA9062AA_SEQ,
+	},
+};
+
+static const struct regmap_access_table da9061_aa_readable_table = {
+	.yes_ranges = da9061_aa_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9061_aa_readable_ranges),
+};
+
+static const struct regmap_access_table da9061_aa_writeable_table = {
+	.yes_ranges = da9061_aa_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9061_aa_writeable_ranges),
+};
+
+static const struct regmap_access_table da9061_aa_volatile_table = {
+	.yes_ranges = da9061_aa_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9061_aa_volatile_ranges),
+};
+
+static const struct regmap_range_cfg da9061_range_cfg[] = {
+	{
+		.range_min = DA9062AA_PAGE_CON,
+		.range_max = DA9062AA_CONFIG_ID,
+		.selector_reg = DA9062AA_PAGE_CON,
+		.selector_mask = 1 << DA9062_I2C_PAGE_SEL_SHIFT,
+		.selector_shift = DA9062_I2C_PAGE_SEL_SHIFT,
+		.window_start = 0,
+		.window_len = 256,
+	}
+};
+
+static struct regmap_config da9061_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = da9061_range_cfg,
+	.num_ranges = ARRAY_SIZE(da9061_range_cfg),
+	.max_register = DA9062AA_CONFIG_ID,
+	.cache_type = REGCACHE_RBTREE,
+	.rd_table = &da9061_aa_readable_table,
+	.wr_table = &da9061_aa_writeable_table,
+	.volatile_table = &da9061_aa_volatile_table,
+};
+
 static const struct regmap_range da9062_aa_readable_ranges[] = {
 	{
 		.range_min = DA9062AA_PAGE_CON,
@@ -456,17 +814,39 @@  static int da9062_get_device_type(struct da9062 *chip)
 	.volatile_table = &da9062_aa_volatile_table,
 };
 
+static const struct of_device_id da9062_dt_ids[] = {
+	{ .compatible = "dlg,da9061", .data = (void *)COMPAT_TYPE_DA9061, },
+	{ .compatible = "dlg,da9062", .data = (void *)COMPAT_TYPE_DA9062, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9062_dt_ids);
+
 static int da9062_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
 	struct da9062 *chip;
+	const struct of_device_id *match;
 	unsigned int irq_base;
+	const struct mfd_cell *cell;
+	const struct regmap_irq_chip *irq_chip;
+	const struct regmap_config *config;
+	int cell_num;
 	int ret;
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
+	if (i2c->dev.of_node) {
+		match = of_match_node(da9062_dt_ids, i2c->dev.of_node);
+		if (!match)
+			return -EINVAL;
+
+		chip->chip_type = (int)match->data;
+	} else {
+		chip->chip_type = id->driver_data;
+	}
+
 	i2c_set_clientdata(i2c, chip);
 	chip->dev = &i2c->dev;
 
@@ -475,7 +855,25 @@  static int da9062_i2c_probe(struct i2c_client *i2c,
 		return -EINVAL;
 	}
 
-	chip->regmap = devm_regmap_init_i2c(i2c, &da9062_regmap_config);
+	switch (chip->chip_type) {
+	case(COMPAT_TYPE_DA9061):
+		cell = da9061_devs;
+		cell_num = ARRAY_SIZE(da9061_devs);
+		irq_chip = &da9061_irq_chip;
+		config = &da9061_regmap_config;
+		break;
+	case(COMPAT_TYPE_DA9062):
+		cell = da9062_devs;
+		cell_num = ARRAY_SIZE(da9062_devs);
+		irq_chip = &da9062_irq_chip;
+		config = &da9062_regmap_config;
+		break;
+	default:
+		dev_err(chip->dev, "Unrecognised chip type\n");
+		return -ENODEV;
+	}
+
+	chip->regmap = devm_regmap_init_i2c(i2c, config);
 	if (IS_ERR(chip->regmap)) {
 		ret = PTR_ERR(chip->regmap);
 		dev_err(chip->dev, "Failed to allocate register map: %d\n",
@@ -493,7 +891,7 @@  static int da9062_i2c_probe(struct i2c_client *i2c,
 
 	ret = regmap_add_irq_chip(chip->regmap, i2c->irq,
 			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
-			-1, &da9062_irq_chip,
+			-1, irq_chip,
 			&chip->regmap_irq);
 	if (ret) {
 		dev_err(chip->dev, "Failed to request IRQ %d: %d\n",
@@ -503,8 +901,8 @@  static int da9062_i2c_probe(struct i2c_client *i2c,
 
 	irq_base = regmap_irq_chip_get_base(chip->regmap_irq);
 
-	ret = mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE, da9062_devs,
-			      ARRAY_SIZE(da9062_devs), NULL, irq_base,
+	ret = mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE, cell,
+			      cell_num, NULL, irq_base,
 			      NULL);
 	if (ret) {
 		dev_err(chip->dev, "Cannot register child devices\n");
@@ -526,17 +924,12 @@  static int da9062_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id da9062_i2c_id[] = {
-	{ "da9062", 0 },
+	{ "da9061", COMPAT_TYPE_DA9061 },
+	{ "da9062", COMPAT_TYPE_DA9062 },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, da9062_i2c_id);
 
-static const struct of_device_id da9062_dt_ids[] = {
-	{ .compatible = "dlg,da9062", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, da9062_dt_ids);
-
 static struct i2c_driver da9062_i2c_driver = {
 	.driver = {
 		.name = "da9062",
@@ -549,6 +942,6 @@  static int da9062_i2c_remove(struct i2c_client *i2c)
 
 module_i2c_driver(da9062_i2c_driver);
 
-MODULE_DESCRIPTION("Core device driver for Dialog DA9062");
+MODULE_DESCRIPTION("Core device driver for Dialog DA9061 and DA9062");
 MODULE_AUTHOR("Steve Twiss <stwiss.opensource@diasemi.com>");
 MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/da9062/core.h b/include/linux/mfd/da9062/core.h
index 376ba84..74d33a0 100644
--- a/include/linux/mfd/da9062/core.h
+++ b/include/linux/mfd/da9062/core.h
@@ -1,5 +1,5 @@ 
 /*
- * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ * Copyright (C) 2015-2017  Dialog Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -18,7 +18,31 @@ 
 #include <linux/interrupt.h>
 #include <linux/mfd/da9062/registers.h>
 
-/* Interrupts */
+enum da9062_compatible_types {
+	COMPAT_TYPE_DA9061 = 1,
+	COMPAT_TYPE_DA9062,
+};
+
+enum da9061_irqs {
+	/* IRQ A */
+	DA9061_IRQ_ONKEY,
+	DA9061_IRQ_WDG_WARN,
+	DA9061_IRQ_SEQ_RDY,
+	/* IRQ B*/
+	DA9061_IRQ_TEMP,
+	DA9061_IRQ_LDO_LIM,
+	DA9061_IRQ_DVC_RDY,
+	DA9061_IRQ_VDD_WARN,
+	/* IRQ C */
+	DA9061_IRQ_GPI0,
+	DA9061_IRQ_GPI1,
+	DA9061_IRQ_GPI2,
+	DA9061_IRQ_GPI3,
+	DA9061_IRQ_GPI4,
+
+	DA9061_NUM_IRQ,
+};
+
 enum da9062_irqs {
 	/* IRQ A */
 	DA9062_IRQ_ONKEY,
@@ -45,6 +69,7 @@  struct da9062 {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *regmap_irq;
+	enum da9062_compatible_types chip_type;
 };
 
 #endif /* __MFD_DA9062_CORE_H__ */
diff --git a/include/linux/mfd/da9062/registers.h b/include/linux/mfd/da9062/registers.h
index 97790d1..18d576a 100644
--- a/include/linux/mfd/da9062/registers.h
+++ b/include/linux/mfd/da9062/registers.h
@@ -1,6 +1,5 @@ 
 /*
- * registers.h - REGISTERS H for DA9062
- * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ * Copyright (C) 2015-2017  Dialog Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -18,6 +17,8 @@ 
 
 #define DA9062_PMIC_DEVICE_ID		0x62
 #define DA9062_PMIC_VARIANT_MRC_AA	0x01
+#define DA9062_PMIC_VARIANT_VRC_DA9061	0x01
+#define DA9062_PMIC_VARIANT_VRC_DA9062	0x02
 
 #define DA9062_I2C_PAGE_SEL_SHIFT	1