| Message ID | 1309250759-18472-1-git-send-email-silesh@ti.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Tony Lindgren |
| Headers | show |
On Tue, Jun 28, 2011 at 2:15 PM, Silesh C V <silesh@ti.com> wrote: > Use generic gpio call to check the validity of the gpio. Note that > this includes gpio 0 also which was missing before. > > Signed-off-by: Silesh C V <silesh@ti.com> > --- > arch/arm/mach-omap2/hsmmc.c | 7 +++---- > 1 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c > index 66868c5..a9b45c7 100644 > --- a/arch/arm/mach-omap2/hsmmc.c > +++ b/arch/arm/mach-omap2/hsmmc.c > @@ -13,6 +13,7 @@ > #include <linux/slab.h> > #include <linux/string.h> > #include <linux/delay.h> > +#include <linux/gpio.h> > #include <mach/hardware.h> > #include <plat/mmc.h> > #include <plat/omap-pm.h> > @@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, > static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, > int controller_nr) > { > - if ((mmc_controller->slots[0].switch_pin > 0) && \ > - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) > + if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) > omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, > OMAP_PIN_INPUT_PULLUP); > - if ((mmc_controller->slots[0].gpio_wp > 0) && \ > - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) > + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) > omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, > OMAP_PIN_INPUT_PULLUP); > if (cpu_is_omap34xx()) { > -- > 1.7.1 > Looks good to me. Reviewed-by: Venkatraman S <svenkatr@ti.com> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Silesh, On 06/28/11 11:45, Silesh C V wrote: > Use generic gpio call to check the validity of the gpio. Note that > this includes gpio 0 also which was missing before. > > Signed-off-by: Silesh C V <silesh@ti.com> > --- > arch/arm/mach-omap2/hsmmc.c | 7 +++---- > 1 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c > index 66868c5..a9b45c7 100644 > --- a/arch/arm/mach-omap2/hsmmc.c > +++ b/arch/arm/mach-omap2/hsmmc.c > @@ -13,6 +13,7 @@ > #include <linux/slab.h> > #include <linux/string.h> > #include <linux/delay.h> > +#include <linux/gpio.h> > #include <mach/hardware.h> > #include <plat/mmc.h> > #include <plat/omap-pm.h> > @@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, > static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, > int controller_nr) > { > - if ((mmc_controller->slots[0].switch_pin > 0) && \ > - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) > + if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) > omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, > OMAP_PIN_INPUT_PULLUP); > - if ((mmc_controller->slots[0].gpio_wp > 0) && \ > - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) > + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) > omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, > OMAP_PIN_INPUT_PULLUP); > if (cpu_is_omap34xx()) { IMHO, you should not separate the patches (this one and OMAP: 4430SDP: Register the card detect GPIO properly), because the 4430sdp fix should come before or together with this patch, otherwise 4430sdp will be broken, once this patch is applied. You can either make it a one patch or make it a single properly numbered series.
Hi Igor, On Tue, Jun 28, 2011 at 10:50 PM, Igor Grinberg <grinberg@compulab.co.il> wrote: > Hi Silesh, > > > IMHO, you should not separate the patches > (this one and OMAP: 4430SDP: Register the card detect GPIO properly), > because the 4430sdp fix should come before or together with this patch, > otherwise 4430sdp will be broken, once this patch is applied. 4430SDP is already broken because it requests/configures GPIO 0. But as you said if this patch goes before the SDP fix, the driver will do Muxing of the pad (as this pad fixes that for GPIO 0)also. Thanks for the suggestion. > > You can either make it a one patch or make it a single properly numbered series. > I will send it as a series. Regards, Silesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 66868c5..a9b45c7 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <plat/mmc.h> #include <plat/omap-pm.h> @@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) {
Use generic gpio call to check the validity of the gpio. Note that this includes gpio 0 also which was missing before. Signed-off-by: Silesh C V <silesh@ti.com> --- arch/arm/mach-omap2/hsmmc.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)