diff mbox

[1/1] pcm:file: delegate htimestamping to slave instead of always getting real_htimestamp

Message ID 1490269245-16858-1-git-send-email-sutar.mounesh@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

sutar.mounesh@gmail.com March 23, 2017, 11:40 a.m. UTC
From: Andreas Pape <apape@de.adit-jv.com>

purpose of this fix, is to read most accurate timestamps.

 From documentation of /src/pcm/pcm.c, we can see:
 """" \par Timestamp mode

 The timestamp mode specifies, if timestamps are activated. Currently, only #SND_PCM_TSTAMP_NONE and #SND_PCM_TSTAMP_MMAP modes are known.
 The mmap mode means that timestamp is taken on every period time boundary. Corresponding position in the ring buffer assigned to timestamp can be obtained using #snd_pcm_htimestamp() function. """"

 As snd_pcm_generic_htimestamp() internally calls snd_pcm_htimestamp() to read time, so accurate timestamp can be read from snd_pcm_generic_htimestamp().

 Also, in case of pcm_file, if the underlying slave is hardware, then we would wish to read elapsed hardware time, as it will be the most accurate, as opposed to the elapsed wall time.
 This will provide pcm_file with the most accurate timestamps.

 Following are the timesamps read with timestamp enabled, for with fix and without fix scenarios:

 1> With fix:
:~#time aplay --enable-tstamp -Dhtstamp_test --period-time=5000 -v -fdat /dev/urandom
Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
File PCM (file=/tmp/swarate_out.wav)
Final file PCM (file=/tmp/swarate_out.wav)
..

Slave: Hardware PCM card 0 'imx6q-sabresd-wm8962' device 0 subdevice 0
Its setup is:
  stream       : PLAYBACK
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 24000
  period_size  : 240
  period_time  : 5000
  tstamp_mode  : ENABLE
  .
  .
Before sleep = 142:409.807623
After sleep = 142:409.807623
Before sleep = 142:414.806016 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_before))
sleep of 2 milisec
After sleep = 142:414.806016 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_after)
From the above timestamps, we can see that slave has returned the same timestamps, as --period-time choosen is 5msec.

2> Without this fix:
The timestamps are returned with realtime value.

:~# time aplay --enable-tstamp -Dhtstamp_test --period-time=5000 -v -fdat /dev/urandom
Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
File PCM (file=/tmp/swarate_out.wav)
Final file PCM (file=/tmp/swarate_out.wav)
.
.
Slave: Hardware PCM card 0 'imx6q-sabresd-wm8962' device 0 subdevice 0
Its setup is:
  stream       : PLAYBACK
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 24000
  period_size  : 240
  period_time  : 5000
  tstamp_mode  : ENABLE
.
.
Before sleep = 241:136.875845 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_before))
sleep of 2 milisec
After sleep = 241:139.076376 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_after)

We can observe here, the timestamps shows time diff of ~2ms, which is the time gap of sleep duration.
Before sleep = 241:139.617588
After sleep = 241:141.746845
Before sleep = 241:142.291618
After sleep = 241:144.406406
Before sleep = 241:144.951421
After sleep = 241:147.066118
Before sleep = 241:147.623421
After sleep = 241:149.740573

Signed-off-by: Andreas Pape <apape@de.adit-jv.com>
Signed-off-by: Mounesh Sutar <sutar.mounesh@gmail.com>

Comments

Takashi Iwai March 29, 2017, 7:48 a.m. UTC | #1
On Thu, 23 Mar 2017 12:40:45 +0100,
sutar.mounesh@gmail.com wrote:
> 
> From: Andreas Pape <apape@de.adit-jv.com>
> 
> purpose of this fix, is to read most accurate timestamps.
> 
>  From documentation of /src/pcm/pcm.c, we can see:
>  """" \par Timestamp mode
> 
>  The timestamp mode specifies, if timestamps are activated. Currently, only #SND_PCM_TSTAMP_NONE and #SND_PCM_TSTAMP_MMAP modes are known.
>  The mmap mode means that timestamp is taken on every period time boundary. Corresponding position in the ring buffer assigned to timestamp can be obtained using #snd_pcm_htimestamp() function. """"
> 
>  As snd_pcm_generic_htimestamp() internally calls snd_pcm_htimestamp() to read time, so accurate timestamp can be read from snd_pcm_generic_htimestamp().
> 
>  Also, in case of pcm_file, if the underlying slave is hardware, then we would wish to read elapsed hardware time, as it will be the most accurate, as opposed to the elapsed wall time.
>  This will provide pcm_file with the most accurate timestamps.
> 
>  Following are the timesamps read with timestamp enabled, for with fix and without fix scenarios:
> 
>  1> With fix:
> :~#time aplay --enable-tstamp -Dhtstamp_test --period-time=5000 -v -fdat /dev/urandom
> Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
> File PCM (file=/tmp/swarate_out.wav)
> Final file PCM (file=/tmp/swarate_out.wav)
> ..
> 
> Slave: Hardware PCM card 0 'imx6q-sabresd-wm8962' device 0 subdevice 0
> Its setup is:
>   stream       : PLAYBACK
>   access       : RW_INTERLEAVED
>   format       : S16_LE
>   subformat    : STD
>   channels     : 2
>   rate         : 48000
>   exact rate   : 48000 (48000/1)
>   msbits       : 16
>   buffer_size  : 24000
>   period_size  : 240
>   period_time  : 5000
>   tstamp_mode  : ENABLE
>   .
>   .
> Before sleep = 142:409.807623
> After sleep = 142:409.807623
> Before sleep = 142:414.806016 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_before))
> sleep of 2 milisec
> After sleep = 142:414.806016 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_after)
> >From the above timestamps, we can see that slave has returned the same timestamps, as --period-time choosen is 5msec.
> 
> 2> Without this fix:
> The timestamps are returned with realtime value.
> 
> :~# time aplay --enable-tstamp -Dhtstamp_test --period-time=5000 -v -fdat /dev/urandom
> Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
> File PCM (file=/tmp/swarate_out.wav)
> Final file PCM (file=/tmp/swarate_out.wav)
> .
> .
> Slave: Hardware PCM card 0 'imx6q-sabresd-wm8962' device 0 subdevice 0
> Its setup is:
>   stream       : PLAYBACK
>   access       : RW_INTERLEAVED
>   format       : S16_LE
>   subformat    : STD
>   channels     : 2
>   rate         : 48000
>   exact rate   : 48000 (48000/1)
>   msbits       : 16
>   buffer_size  : 24000
>   period_size  : 240
>   period_time  : 5000
>   tstamp_mode  : ENABLE
> .
> .
> Before sleep = 241:136.875845 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_before))
> sleep of 2 milisec
> After sleep = 241:139.076376 (calling snd_pcm_htimestamp(handle, &avail, &tstamp_after)
> 
> We can observe here, the timestamps shows time diff of ~2ms, which is the time gap of sleep duration.
> Before sleep = 241:139.617588
> After sleep = 241:141.746845
> Before sleep = 241:142.291618
> After sleep = 241:144.406406
> Before sleep = 241:144.951421
> After sleep = 241:147.066118
> Before sleep = 241:147.623421
> After sleep = 241:149.740573
> 
> Signed-off-by: Andreas Pape <apape@de.adit-jv.com>
> Signed-off-by: Mounesh Sutar <sutar.mounesh@gmail.com>

Applied now, thanks.


Takashi
diff mbox

Patch

diff --git a/src/pcm/pcm_file.c b/src/pcm/pcm_file.c
index 8012251..fe36a1c 100644
--- a/src/pcm/pcm_file.c
+++ b/src/pcm/pcm_file.c
@@ -728,7 +728,7 @@  static const snd_pcm_fast_ops_t snd_pcm_file_fast_ops = {
 	.poll_descriptors_count = snd_pcm_generic_poll_descriptors_count,
 	.poll_descriptors = snd_pcm_generic_poll_descriptors,
 	.poll_revents = snd_pcm_generic_poll_revents,
-	.htimestamp = snd_pcm_generic_real_htimestamp,
+	.htimestamp = snd_pcm_generic_htimestamp,
 };
 
 /**