| Message ID | 1491066107.29552.29.camel@hbabu-laptop (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Herbert Xu |
| Headers | show |
Haren Myneni <haren@linux.vnet.ibm.com> writes: > @@ -656,13 +953,21 @@ static __init int nx842_powernv_init(void) > BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT); > BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT); > > - for_each_compatible_node(dn, NULL, "ibm,power-nx") > - nx842_powernv_probe(dn); > + if (is_vas_available()) { > + for_each_compatible_node(dn, NULL, "ibm,xscom") > + nx842_powernv_probe_vas(dn); I'm not keen on how the device bindings work, instead, I think firmware should provide a 'ibm,vas' compatible node, rather than simply searching through all the ibm,xscom nodes. XSCOMs aren't something that Linux should really know about, it's a debug interface, and one we use through PRD to do PRD-things, XSCOMs aren't part of the architecture.
Hi Haren, A few comments ... Haren Myneni <haren@linux.vnet.ibm.com> writes: > diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h > index 4e5a470..7315621 100644 > --- a/arch/powerpc/include/asm/vas.h > +++ b/arch/powerpc/include/asm/vas.h > @@ -19,6 +19,8 @@ > #define VAS_RX_FIFO_SIZE_MIN (1 << 10) /* 1KB */ > #define VAS_RX_FIFO_SIZE_MAX (8 << 20) /* 8MB */ > > +#define is_vas_available() (cpu_has_feature(CPU_FTR_ARCH_300)) You shouldn't need that, it should all come from the device tree. > diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig > index ad7552a..4ad7fdb 100644 > --- a/drivers/crypto/nx/Kconfig > +++ b/drivers/crypto/nx/Kconfig > @@ -38,6 +38,7 @@ config CRYPTO_DEV_NX_COMPRESS_PSERIES > config CRYPTO_DEV_NX_COMPRESS_POWERNV > tristate "Compression acceleration support on PowerNV platform" > depends on PPC_POWERNV > + select VAS Don't select symbols that are user visible. I'm not sure we actually want CONFIG_VAS to be user visible, but currently it is so this should be 'depends on VAS'. > diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c > index 8737e90..66efd39 100644 > --- a/drivers/crypto/nx/nx-842-powernv.c > +++ b/drivers/crypto/nx/nx-842-powernv.c > @@ -554,6 +662,164 @@ static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen, > wmem, CCW_FC_842_DECOMP_CRC); > } > > + > +static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id, > + int vasid, int ct) > +{ > + struct vas_window *rxwin, *txwin = NULL; > + struct vas_rx_win_attr rxattr; > + struct vas_tx_win_attr txattr; > + struct nx842_coproc *coproc; > + u32 lpid, pid, tid; > + u64 rx_fifo; > + int ret; > +#define RX_FIFO_SIZE 0x8000 Where's that come from? > + if (of_property_read_u64(dn, "rx-fifo-address", (void *)&rx_fifo)) { > + pr_err("ibm,nx-842: Missing rx-fifo-address property\n"); The driver already declares pr_fmt(), so do you need the prefixes on these pr_err()s ? > + return -EINVAL; > + } > + > + if (of_property_read_u32(dn, "lpid", &lpid)) { > + pr_err("ibm,nx-842: Missing lpid property\n"); > + return -EINVAL; > + } > + > + if (of_property_read_u32(dn, "pid", &pid)) { > + pr_err("ibm,nx-842: Missing pid property\n"); > + return -EINVAL; > + } > + > + if (of_property_read_u32(dn, "tid", &tid)) { > + pr_err("ibm,nx-842: Missing tid property\n"); > + return -EINVAL; > + } > + > + vas_init_rx_win_attr(&rxattr, ct); > + rxattr.rx_fifo = (void *)rx_fifo; > + rxattr.rx_fifo_size = RX_FIFO_SIZE; > + rxattr.lnotify_lpid = lpid; > + rxattr.lnotify_pid = pid; > + rxattr.lnotify_tid = tid; > + rxattr.wcreds_max = 64; > + > + /* > + * Open a VAS receice window which is used to configure RxFIFO > + * for NX. > + */ > + rxwin = vas_rx_win_open(vasid, ct, &rxattr); > + if (IS_ERR(rxwin)) { > + pr_err("ibm,nx-842: setting RxFIFO with VAS failed: %ld\n", > + PTR_ERR(rxwin)); > + return PTR_ERR(rxwin); > + } > + > + /* > + * Kernel requests will be high priority. So open send > + * windows only for high priority RxFIFO entries. > + */ > + if (ct == VAS_COP_TYPE_842_HIPRI) { This if body looks like it should be a separate function to me. > + vas_init_tx_win_attr(&txattr, ct); > + txattr.lpid = 0; /* lpid is 0 for kernel requests */ > + txattr.pid = mfspr(SPRN_PID); > + > + /* > + * Open a VAS send window which is used to send request to NX. > + */ > + txwin = vas_tx_win_open(vasid, ct, &txattr); > + if (IS_ERR(txwin)) { > + pr_err("ibm,nx-842: Can not open TX window: %ld\n", > + PTR_ERR(txwin)); > + ret = PTR_ERR(txwin); > + goto err_out; > + } > + } > + > + coproc = kmalloc(sizeof(*coproc), GFP_KERNEL); > + if (!coproc) { > + ret = -ENOMEM; > + goto err_out; > + } The error handling would be simpler if you did that earlier, before you open the RX/TX windows. > + coproc->chip_id = chip_id; > + coproc->vas.rxwin = rxwin; > + coproc->vas.txwin = txwin; > + > + INIT_LIST_HEAD(&coproc->list); > + list_add(&coproc->list, &nx842_coprocs); That duplicates logic in the non-vas probe, so ideally would be shared or in a helper. > + > + return 0; > + > +err_out: > + if (txwin) > + vas_win_close(txwin); > + > + vas_win_close(rxwin); > + > + return ret; > +} > + > + > +static int __init nx842_powernv_probe_vas(struct device_node *dn) > +{ > + struct device_node *nxdn, *np; There's too many device nodes in this function. > + int chip_id, vasid, rc; > + > + chip_id = of_get_ibm_chip_id(dn); > + if (chip_id < 0) { > + pr_err("ibm,chip-id missing\n"); > + return -EINVAL; > + } > + > + np = of_find_node_by_name(dn, "vas"); You should always search by compatible when possible. I don't see why you wouldn't here. > + if (!np) { > + pr_err("ibm,xscom: Missing VAS device node\n"); > + return -EINVAL; > + } > + > + if (of_property_read_u32(np, "vas-id", &vasid)) { > + pr_err("ibm,vas: Missing vas-id device property\n"); > + of_node_put(np); > + return -EINVAL; > + } > + > + of_node_put(np); > + > + nxdn = of_find_compatible_node(dn, NULL, "ibm,power-nx"); What are you trying to do here? This will find any node in the device tree that is compatible with "ibm,power-nx". It will start searching after dn in the device tree. But it doesn't search the children of dn necessarily, is that what you're trying to do? > + if (!nxdn) { > + pr_err("ibm,xscom: Missing NX device node\n"); > + return -EINVAL; > + } > + > + np = of_find_node_by_name(nxdn, "ibm,nx-842-high"); Search by name again. > + if (!np) { > + pr_err("ibm,nx-842-high device node is missing\n"); > + rc = -EINVAL; > + goto out_nd_put; > + } > + > + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842_HIPRI); > + of_node_put(np); > + if (rc) > + goto out_nd_put; > + > + np = of_find_node_by_name(nxdn, "ibm,nx-842-normal"); Search by name again. Normal vs high should not be encoded in the name, it should be a property of the node. > + if (!np) { > + pr_err("ibm,nx-842-normal device node is missing\n"); > + rc = -EINVAL; > + goto out_nd_put; > + } > + > + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842); > + of_node_put(np); > + if (!rc) > + return 0; > + > +out_nd_put: > + of_node_put(nxdn); > + return rc; > +} > + > static int __init nx842_powernv_probe(struct device_node *dn) > { > struct nx842_coproc *coproc; > @@ -602,11 +868,42 @@ static void nx842_delete_coproc(void) > struct nx842_coproc *coproc, *n; > > list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { > + if (is_vas_available()) { That should just be a check of coproc->vas.rxwin != NULL or similar. > + vas_win_close(coproc->vas.rxwin); > + /* > + * txwin opened only for high priority RxFIFOs > + */ > + if (coproc->vas.txwin) > + vas_win_close(coproc->vas.txwin); > + } That should be pulled out into a helper, not in the middle of the loop here. > list_del(&coproc->list); > kfree(coproc); > } > } cheers
Michael, Thanks for the review and comments. On 04/04/2017 03:55 AM, Michael Ellerman wrote: > Hi Haren, > > A few comments ... > > Haren Myneni <haren@linux.vnet.ibm.com> writes: > >> diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h >> index 4e5a470..7315621 100644 >> --- a/arch/powerpc/include/asm/vas.h >> +++ b/arch/powerpc/include/asm/vas.h >> @@ -19,6 +19,8 @@ >> #define VAS_RX_FIFO_SIZE_MIN (1 << 10) /* 1KB */ >> #define VAS_RX_FIFO_SIZE_MAX (8 << 20) /* 8MB */ >> >> +#define is_vas_available() (cpu_has_feature(CPU_FTR_ARCH_300)) > > You shouldn't need that, it should all come from the device tree. > >> diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig >> index ad7552a..4ad7fdb 100644 >> --- a/drivers/crypto/nx/Kconfig >> +++ b/drivers/crypto/nx/Kconfig >> @@ -38,6 +38,7 @@ config CRYPTO_DEV_NX_COMPRESS_PSERIES >> config CRYPTO_DEV_NX_COMPRESS_POWERNV >> tristate "Compression acceleration support on PowerNV platform" >> depends on PPC_POWERNV >> + select VAS > > Don't select symbols that are user visible. > > I'm not sure we actually want CONFIG_VAS to be user visible, but > currently it is so this should be 'depends on VAS'. > >> diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c >> index 8737e90..66efd39 100644 >> --- a/drivers/crypto/nx/nx-842-powernv.c >> +++ b/drivers/crypto/nx/nx-842-powernv.c >> @@ -554,6 +662,164 @@ static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen, >> wmem, CCW_FC_842_DECOMP_CRC); >> } >> >> + >> +static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id, >> + int vasid, int ct) >> +{ >> + struct vas_window *rxwin, *txwin = NULL; >> + struct vas_rx_win_attr rxattr; >> + struct vas_tx_win_attr txattr; >> + struct nx842_coproc *coproc; >> + u32 lpid, pid, tid; >> + u64 rx_fifo; >> + int ret; >> +#define RX_FIFO_SIZE 0x8000 > > Where's that come from? We use FIFO size in skibbot to allocate FIFO buffer. I should export fifo size as device tree property and use it here. > >> + if (of_property_read_u64(dn, "rx-fifo-address", (void *)&rx_fifo)) { >> + pr_err("ibm,nx-842: Missing rx-fifo-address property\n"); > > The driver already declares pr_fmt(), so do you need the prefixes on > these pr_err()s ? > >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32(dn, "lpid", &lpid)) { >> + pr_err("ibm,nx-842: Missing lpid property\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32(dn, "pid", &pid)) { >> + pr_err("ibm,nx-842: Missing pid property\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32(dn, "tid", &tid)) { >> + pr_err("ibm,nx-842: Missing tid property\n"); >> + return -EINVAL; >> + } >> + >> + vas_init_rx_win_attr(&rxattr, ct); >> + rxattr.rx_fifo = (void *)rx_fifo; >> + rxattr.rx_fifo_size = RX_FIFO_SIZE; >> + rxattr.lnotify_lpid = lpid; >> + rxattr.lnotify_pid = pid; >> + rxattr.lnotify_tid = tid; >> + rxattr.wcreds_max = 64; >> + >> + /* >> + * Open a VAS receice window which is used to configure RxFIFO >> + * for NX. >> + */ >> + rxwin = vas_rx_win_open(vasid, ct, &rxattr); >> + if (IS_ERR(rxwin)) { >> + pr_err("ibm,nx-842: setting RxFIFO with VAS failed: %ld\n", >> + PTR_ERR(rxwin)); >> + return PTR_ERR(rxwin); >> + } >> + >> + /* >> + * Kernel requests will be high priority. So open send >> + * windows only for high priority RxFIFO entries. >> + */ >> + if (ct == VAS_COP_TYPE_842_HIPRI) { > > This if body looks like it should be a separate function to me. > >> + vas_init_tx_win_attr(&txattr, ct); >> + txattr.lpid = 0; /* lpid is 0 for kernel requests */ >> + txattr.pid = mfspr(SPRN_PID); >> + >> + /* >> + * Open a VAS send window which is used to send request to NX. >> + */ >> + txwin = vas_tx_win_open(vasid, ct, &txattr); >> + if (IS_ERR(txwin)) { >> + pr_err("ibm,nx-842: Can not open TX window: %ld\n", >> + PTR_ERR(txwin)); >> + ret = PTR_ERR(txwin); >> + goto err_out; >> + } >> + } >> + >> + coproc = kmalloc(sizeof(*coproc), GFP_KERNEL); >> + if (!coproc) { >> + ret = -ENOMEM; >> + goto err_out; >> + } > > The error handling would be simpler if you did that earlier, before you > open the RX/TX windows. > >> + coproc->chip_id = chip_id; >> + coproc->vas.rxwin = rxwin; >> + coproc->vas.txwin = txwin; >> + >> + INIT_LIST_HEAD(&coproc->list); >> + list_add(&coproc->list, &nx842_coprocs); > > That duplicates logic in the non-vas probe, so ideally would be shared > or in a helper. > >> + >> + return 0; >> + >> +err_out: >> + if (txwin) >> + vas_win_close(txwin); >> + >> + vas_win_close(rxwin); >> + >> + return ret; >> +} >> + >> + >> +static int __init nx842_powernv_probe_vas(struct device_node *dn) >> +{ >> + struct device_node *nxdn, *np; > > There's too many device nodes in this function. > >> + int chip_id, vasid, rc; >> + >> + chip_id = of_get_ibm_chip_id(dn); >> + if (chip_id < 0) { >> + pr_err("ibm,chip-id missing\n"); >> + return -EINVAL; >> + } >> + >> + np = of_find_node_by_name(dn, "vas"); > > You should always search by compatible when possible. I don't see why > you wouldn't here. Compatible property is created with the latest VAS changes. So as suggested by Stewart, will remove search by xscom and use compatible property for VAS. > > >> + if (!np) { >> + pr_err("ibm,xscom: Missing VAS device node\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32(np, "vas-id", &vasid)) { >> + pr_err("ibm,vas: Missing vas-id device property\n"); >> + of_node_put(np); >> + return -EINVAL; >> + } >> + >> + of_node_put(np); >> + >> + nxdn = of_find_compatible_node(dn, NULL, "ibm,power-nx"); > > What are you trying to do here? > > This will find any node in the device tree that is compatible with > "ibm,power-nx". It will start searching after dn in the device tree. But > it doesn't search the children of dn necessarily, is that what you're > trying to do? Search has to be with in node. can I use of_get_child_by_name? > >> + if (!nxdn) { >> + pr_err("ibm,xscom: Missing NX device node\n"); >> + return -EINVAL; >> + } >> + >> + np = of_find_node_by_name(nxdn, "ibm,nx-842-high"); > > Search by name again. > >> + if (!np) { >> + pr_err("ibm,nx-842-high device node is missing\n"); >> + rc = -EINVAL; >> + goto out_nd_put; >> + } >> + >> + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842_HIPRI); >> + of_node_put(np); >> + if (rc) >> + goto out_nd_put; >> + >> + np = of_find_node_by_name(nxdn, "ibm,nx-842-normal"); > > Search by name again. Do you prefer creating compatible property under these nodes? > > Normal vs high should not be encoded in the name, it should be a > property of the node. Both 842 and gzip will have normal or high FIFOs and each one will contain rx-fifo-address, lpid, pid, and tid properties. So ibm.nx-842-high and ibm,nx-842-normal device nodes are created. /proc/device-tree/xscom@603fc00000000/nx@2010000/ibm,nx-842-high lpid phandle rx-fifo-address name pid tid So do you prefer ibm,nx-842/high/ lpid phandle rx-fifo-address name pid tid > >> + if (!np) { >> + pr_err("ibm,nx-842-normal device node is missing\n"); >> + rc = -EINVAL; >> + goto out_nd_put; >> + } >> + >> + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842); >> + of_node_put(np); >> + if (!rc) >> + return 0; >> + >> +out_nd_put: >> + of_node_put(nxdn); >> + return rc; >> +} >> + >> static int __init nx842_powernv_probe(struct device_node *dn) >> { >> struct nx842_coproc *coproc; >> @@ -602,11 +868,42 @@ static void nx842_delete_coproc(void) >> struct nx842_coproc *coproc, *n; >> >> list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { >> + if (is_vas_available()) { > > That should just be a check of coproc->vas.rxwin != NULL or similar. > >> + vas_win_close(coproc->vas.rxwin); >> + /* >> + * txwin opened only for high priority RxFIFOs >> + */ >> + if (coproc->vas.txwin) >> + vas_win_close(coproc->vas.txwin); >> + } > > That should be pulled out into a helper, not in the middle of the loop > here. > >> list_del(&coproc->list); >> kfree(coproc); >> } >> } > > > cheers >
diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h index 4e5a470..7315621 100644 --- a/arch/powerpc/include/asm/vas.h +++ b/arch/powerpc/include/asm/vas.h @@ -19,6 +19,8 @@ #define VAS_RX_FIFO_SIZE_MIN (1 << 10) /* 1KB */ #define VAS_RX_FIFO_SIZE_MAX (8 << 20) /* 8MB */ +#define is_vas_available() (cpu_has_feature(CPU_FTR_ARCH_300)) + /* * Co-processor Engine type. */ diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig index ad7552a..4ad7fdb 100644 --- a/drivers/crypto/nx/Kconfig +++ b/drivers/crypto/nx/Kconfig @@ -38,6 +38,7 @@ config CRYPTO_DEV_NX_COMPRESS_PSERIES config CRYPTO_DEV_NX_COMPRESS_POWERNV tristate "Compression acceleration support on PowerNV platform" depends on PPC_POWERNV + select VAS default y help Support for PowerPC Nest (NX) compression acceleration. This diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c index 8737e90..66efd39 100644 --- a/drivers/crypto/nx/nx-842-powernv.c +++ b/drivers/crypto/nx/nx-842-powernv.c @@ -23,6 +23,7 @@ #include <asm/prom.h> #include <asm/icswx.h> #include <asm/vas.h> +#include <asm/reg.h> MODULE_LICENSE("GPL"); MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>"); @@ -52,10 +53,20 @@ struct nx842_coproc { unsigned int ct; unsigned int ci; } icswx; + struct { + struct vas_window *txwin; + struct vas_window *rxwin; + } vas; }; struct list_head list; }; +/* + * Send the request to NX engine on the chip for the corresponding CPU + * where the process is executing. Use with VAS function. + */ +static DEFINE_PER_CPU(struct vas_window *, nx842_txwin); + /* no cpu hotplug on powernv, so this list never changes after init */ static LIST_HEAD(nx842_coprocs); static unsigned int nx842_ct; /* use with icswx function */ @@ -499,6 +510,103 @@ static int nx842_icswx_function(const unsigned char *in, unsigned int inlen, } /** + * nx842_vas_function - compress/decompress data using the 842 algorithm + * + * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems. + * This compresses or decompresses the provided input buffer into the provided + * output buffer. + * + * Upon return from this function @outlen contains the length of the + * output data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * The @workmem buffer should only be used by one function call at a time. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * @fc: function code, see CCW Function Codes in nx-842.h + * + * Returns: + * 0 Success, output of length @outlenp stored in the buffer + * at @out + * -ENODEV Hardware unavailable + * -ENOSPC Output buffer is to small + * -EMSGSIZE Input buffer too large + * -EINVAL buffer constraints do not fix nx842_constraints + * -EPROTO hardware error during operation + * -ETIMEDOUT hardware did not complete operation in reasonable time + * -EINTR operation was aborted + */ +static int nx842_vas_function(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *workmem, int fc) +{ + struct coprocessor_request_block *crb; + struct coprocessor_status_block *csb; + struct nx842_workmem *wmem; + struct vas_window *txwin; + int ret; + u32 ccw; + unsigned int outlen = *outlenp; + + wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN); + + *outlenp = 0; + + crb = &wmem->crb; + csb = &crb->csb; + + ret = nx842_cfg_crb(in, inlen, out, outlen, wmem); + if (ret) + return ret; + + ccw = 0; + ccw = SET_FIELD(CCW_FC_842, ccw, fc); + crb->ccw = cpu_to_be32(ccw); + + /* + * Send request to the NX engine on the chip that corresponds to + * the current CPU. + */ + txwin = per_cpu(nx842_txwin, smp_processor_id()); + /* shoudn't happen, we don't load without a coproc */ + if (!txwin) { + pr_err_ratelimited("NX-842 coprocessor is not available"); + return -ENODEV; + } + + wmem->start = ktime_get(); + + /* + * VAS copy CRB into L2 cache. Refer <asm/vas.h>. + * @crb, @offset and @first (must be true) + */ + vas_copy_crb(crb, 0, 1); + + /* + * VAS paste previously copied CRB to NX. + * @txwin, @offset, @last (must be true) and @re is expected/assumed + * to be true for NX windows. + */ + ret = vas_paste_crb(txwin, 0, 1, 1); + + if (ret) { + pr_err_ratelimited("NX-842: VAS copy/paste failed\n"); + return ret; + } + + ret = wait_for_csb(wmem, csb); + if (!ret) + *outlenp = be32_to_cpu(csb->count); + + return ret; +} + +/** * nx842_powernv_compress - Compress data using the 842 algorithm * * Compression provided by the NX842 coprocessor on IBM PowerNV systems. @@ -554,6 +662,164 @@ static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen, wmem, CCW_FC_842_DECOMP_CRC); } + +static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id, + int vasid, int ct) +{ + struct vas_window *rxwin, *txwin = NULL; + struct vas_rx_win_attr rxattr; + struct vas_tx_win_attr txattr; + struct nx842_coproc *coproc; + u32 lpid, pid, tid; + u64 rx_fifo; + int ret; +#define RX_FIFO_SIZE 0x8000 + + if (of_property_read_u64(dn, "rx-fifo-address", (void *)&rx_fifo)) { + pr_err("ibm,nx-842: Missing rx-fifo-address property\n"); + return -EINVAL; + } + + if (of_property_read_u32(dn, "lpid", &lpid)) { + pr_err("ibm,nx-842: Missing lpid property\n"); + return -EINVAL; + } + + if (of_property_read_u32(dn, "pid", &pid)) { + pr_err("ibm,nx-842: Missing pid property\n"); + return -EINVAL; + } + + if (of_property_read_u32(dn, "tid", &tid)) { + pr_err("ibm,nx-842: Missing tid property\n"); + return -EINVAL; + } + + vas_init_rx_win_attr(&rxattr, ct); + rxattr.rx_fifo = (void *)rx_fifo; + rxattr.rx_fifo_size = RX_FIFO_SIZE; + rxattr.lnotify_lpid = lpid; + rxattr.lnotify_pid = pid; + rxattr.lnotify_tid = tid; + rxattr.wcreds_max = 64; + + /* + * Open a VAS receice window which is used to configure RxFIFO + * for NX. + */ + rxwin = vas_rx_win_open(vasid, ct, &rxattr); + if (IS_ERR(rxwin)) { + pr_err("ibm,nx-842: setting RxFIFO with VAS failed: %ld\n", + PTR_ERR(rxwin)); + return PTR_ERR(rxwin); + } + + /* + * Kernel requests will be high priority. So open send + * windows only for high priority RxFIFO entries. + */ + if (ct == VAS_COP_TYPE_842_HIPRI) { + vas_init_tx_win_attr(&txattr, ct); + txattr.lpid = 0; /* lpid is 0 for kernel requests */ + txattr.pid = mfspr(SPRN_PID); + + /* + * Open a VAS send window which is used to send request to NX. + */ + txwin = vas_tx_win_open(vasid, ct, &txattr); + if (IS_ERR(txwin)) { + pr_err("ibm,nx-842: Can not open TX window: %ld\n", + PTR_ERR(txwin)); + ret = PTR_ERR(txwin); + goto err_out; + } + } + + coproc = kmalloc(sizeof(*coproc), GFP_KERNEL); + if (!coproc) { + ret = -ENOMEM; + goto err_out; + } + + coproc->chip_id = chip_id; + coproc->vas.rxwin = rxwin; + coproc->vas.txwin = txwin; + + INIT_LIST_HEAD(&coproc->list); + list_add(&coproc->list, &nx842_coprocs); + + return 0; + +err_out: + if (txwin) + vas_win_close(txwin); + + vas_win_close(rxwin); + + return ret; +} + + +static int __init nx842_powernv_probe_vas(struct device_node *dn) +{ + struct device_node *nxdn, *np; + int chip_id, vasid, rc; + + chip_id = of_get_ibm_chip_id(dn); + if (chip_id < 0) { + pr_err("ibm,chip-id missing\n"); + return -EINVAL; + } + + np = of_find_node_by_name(dn, "vas"); + if (!np) { + pr_err("ibm,xscom: Missing VAS device node\n"); + return -EINVAL; + } + + if (of_property_read_u32(np, "vas-id", &vasid)) { + pr_err("ibm,vas: Missing vas-id device property\n"); + of_node_put(np); + return -EINVAL; + } + + of_node_put(np); + + nxdn = of_find_compatible_node(dn, NULL, "ibm,power-nx"); + if (!nxdn) { + pr_err("ibm,xscom: Missing NX device node\n"); + return -EINVAL; + } + + np = of_find_node_by_name(nxdn, "ibm,nx-842-high"); + if (!np) { + pr_err("ibm,nx-842-high device node is missing\n"); + rc = -EINVAL; + goto out_nd_put; + } + + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842_HIPRI); + of_node_put(np); + if (rc) + goto out_nd_put; + + np = of_find_node_by_name(nxdn, "ibm,nx-842-normal"); + if (!np) { + pr_err("ibm,nx-842-normal device node is missing\n"); + rc = -EINVAL; + goto out_nd_put; + } + + rc = vas_cfg_coproc_info(np, chip_id, vasid, VAS_COP_TYPE_842); + of_node_put(np); + if (!rc) + return 0; + +out_nd_put: + of_node_put(nxdn); + return rc; +} + static int __init nx842_powernv_probe(struct device_node *dn) { struct nx842_coproc *coproc; @@ -602,11 +868,42 @@ static void nx842_delete_coproc(void) struct nx842_coproc *coproc, *n; list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { + if (is_vas_available()) { + vas_win_close(coproc->vas.rxwin); + /* + * txwin opened only for high priority RxFIFOs + */ + if (coproc->vas.txwin) + vas_win_close(coproc->vas.txwin); + } list_del(&coproc->list); kfree(coproc); } } +/* + * Identify chip ID for each CPU and save send window address in percpu + * nx842_txwin for the corresponding NX engine. + * nx842_txwin is used later to send the NX request with the txwin for + * the CPU where the request is running. + */ +static void nx842_set_per_cpu_txwin(void) +{ + unsigned int i, chip_id; + struct nx842_coproc *coproc, *n; + + for_each_possible_cpu(i) { + chip_id = cpu_to_chip_id(i); + list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { + if ((coproc->chip_id == chip_id) && + coproc->vas.txwin) { + per_cpu(nx842_txwin, i) = coproc->vas.txwin; + break; + } + } + } +} + static struct nx842_constraints nx842_powernv_constraints = { .alignment = DDE_BUFFER_ALIGN, .multiple = DDE_BUFFER_LAST_MULT, @@ -656,13 +953,21 @@ static __init int nx842_powernv_init(void) BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT); BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT); - for_each_compatible_node(dn, NULL, "ibm,power-nx") - nx842_powernv_probe(dn); + if (is_vas_available()) { + for_each_compatible_node(dn, NULL, "ibm,xscom") + nx842_powernv_probe_vas(dn); - if (!nx842_ct) - return -ENODEV; + nx842_set_per_cpu_txwin(); + nx842_powernv_function = nx842_vas_function; + } else { + for_each_compatible_node(dn, NULL, "ibm,power-nx") + nx842_powernv_probe(dn); - nx842_powernv_function = nx842_icswx_function; + nx842_powernv_function = nx842_icswx_function; + } + + if (list_empty(&nx842_coprocs)) + return -ENODEV; ret = crypto_register_alg(&nx842_powernv_alg); if (ret) {
[PATCH 4/5] crypto/nx: Add P9 NX support for 842 compression engine. This patch adds P9 NX support for 842 compression engine. Virtual Accelerator Switchboard (VAS) is used to access 842 engine on P9. For each NX engine per chip, setup receive window using vas_rx_win_open() which configures RxFIFo with FIFO address, lpid, pid and tid values. This unique (lpid, pid, tid) combination will be used to identify the target engine. Then open send window with vas_tx_win_open() which is used to send NX requests to VAS. NX provides high and normal priority FIFOs. For compression / decompression requests, we use only hight priority FIFOs in kernel. Each NX request will be communicated to VAS using copy/paste instructions with vas_copy_crb() / vas_paste_crb() functions. Signed-off-by: Haren Myneni <haren@us.ibm.com> --- arch/powerpc/include/asm/vas.h | 2 + drivers/crypto/nx/Kconfig | 1 + drivers/crypto/nx/nx-842-powernv.c | 315 ++++++++++++++++++++++++++++++++++++- 3 files changed, 313 insertions(+), 5 deletions(-)