| Message ID | 1488937357-5623-2-git-send-email-hoegeun.kwon@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 08, 2017 at 10:42:35AM +0900, Hoegeun Kwon wrote: > The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected > using MIPI-DSI interfaces. > > Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > .../bindings/display/panel/samsung,s6e3ha2.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt Applied, thanks. Thierry
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt new file mode 100644 index 0000000..18854f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt @@ -0,0 +1,28 @@ +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + +Required properties: + - compatible: "samsung,s6e3ha2" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - enable-gpios: a GPIO spec for the panel enable pin (active high) + +Optional properties: + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +};