[02/16] mfd: madera: Add common support for Cirrus Logic Madera codecs

Commit Message

Richard Fitzgerald April 5, 2017, 10:07 a.m. UTC

This adds the generic core support for Cirrus Logic "Madera" class codecs.
These are complex audio codec SoCs with a variety of digital and analogue
I/O, onboard audio processing and DSPs, and other features.

These codecs are all based off a common set of hardware IP so can be
supported by a core of common code (with a few minor device-to-device
variations).

Signed-off-by: Charles Keepax <[e-mail]>
Signed-off-by: Nikesh Oswal <[e-mail]>
Signed-off-by: Richard Fitzgerald <[e-mail]>
---
 Documentation/devicetree/bindings/mfd/madera.txt |  79 +++
 MAINTAINERS                                      |   3 +
 drivers/mfd/Kconfig                              |  23 +
 drivers/mfd/Makefile                             |   4 +
 drivers/mfd/madera-core.c                        | 689 +++++++++++++++++++++++
 drivers/mfd/madera-i2c.c                         | 130 +++++
 drivers/mfd/madera-spi.c                         | 131 +++++
 drivers/mfd/madera.h                             |  52 ++
 include/linux/mfd/madera/core.h                  | 175 ++++++
 include/linux/mfd/madera/pdata.h                 |  88 +++
 10 files changed, 1374 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt
 create mode 100644 drivers/mfd/madera-core.c
 create mode 100644 drivers/mfd/madera-i2c.c
 create mode 100644 drivers/mfd/madera-spi.c
 create mode 100644 drivers/mfd/madera.h
 create mode 100644 include/linux/mfd/madera/core.h
 create mode 100644 include/linux/mfd/madera/pdata.h

Comments

Lee Jones April 12, 2017, 12:54 p.m. UTC | #1

On Wed, 05 Apr 2017, Richard Fitzgerald wrote:

> This adds the generic core support for Cirrus Logic "Madera" class codecs.
> These are complex audio codec SoCs with a variety of digital and analogue
> I/O, onboard audio processing and DSPs, and other features.
> 
> These codecs are all based off a common set of hardware IP so can be
> supported by a core of common code (with a few minor device-to-device
> variations).
> 
> Signed-off-by: Charles Keepax <[e-mail]>
> Signed-off-by: Nikesh Oswal <[e-mail]>
> Signed-off-by: Richard Fitzgerald <[e-mail]>
> ---
>  Documentation/devicetree/bindings/mfd/madera.txt |  79 +++
>  MAINTAINERS                                      |   3 +
>  drivers/mfd/Kconfig                              |  23 +
>  drivers/mfd/Makefile                             |   4 +
>  drivers/mfd/madera-core.c                        | 689 +++++++++++++++++++++++
>  drivers/mfd/madera-i2c.c                         | 130 +++++
>  drivers/mfd/madera-spi.c                         | 131 +++++
>  drivers/mfd/madera.h                             |  52 ++
>  include/linux/mfd/madera/core.h                  | 175 ++++++
>  include/linux/mfd/madera/pdata.h                 |  88 +++
>  10 files changed, 1374 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt
>  create mode 100644 drivers/mfd/madera-core.c
>  create mode 100644 drivers/mfd/madera-i2c.c
>  create mode 100644 drivers/mfd/madera-spi.c
>  create mode 100644 drivers/mfd/madera.h
>  create mode 100644 include/linux/mfd/madera/core.h
>  create mode 100644 include/linux/mfd/madera/pdata.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
> new file mode 100644
> index 0000000..a6c3260
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/madera.txt
> @@ -0,0 +1,79 @@
> +Cirrus Logic Madera class audio codecs multi-function device
> +
> +These devices are audio SoCs with extensive digital capabilities and a range
> +of analogue I/O.
> +
> +See also the child driver bindings in:
> +bindings/extcon/extcon-madera.txt
> +bindings/gpio/gpio-madera.txt
> +bindings/interrupt-controller/cirrus,madera.txt
> +bindings/pinctrl/cirrus,madera-pinctrl.txt
> +bindings/regulator/madera-ldo1.txt
> +bindings/regulator/madera-micsupp.txt
> +bindings/sound/madera.txt
> +
> +Required properties:
> +
> +  - compatible : One of the following chip-specific strings:
> +        "cirrus,cs47l35"
> +        "cirrus,cs47l85"
> +        "cirrus,cs47l90"
> +        "cirrus,cs47l91"
> +        "cirrus,wm1840"
> +
> +  - reg : I2C slave address when connected using I2C, chip select number when
> +    using SPI.
> +
> +  - DCVDD-supply : Power supply for the device as defined in
> +    bindings/regulator/regulator.txt
> +    Mandatory on CS47L35, CS47L90, CS47L91
> +    Optional on CS47L85, WM1840
> +
> +  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
> +    Power supplies for the device
> +
> +  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
> +    (CS47L85, CS47L90, CS47L91, WM1840)
> +
> +  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
> +    (CS47L85, WM1840)
> +
> +  - SPKVDD-supply : Power supply for the device
> +    (CS47L35)
> +
> +Optional properties:
> +
> +  - MICVDD-supply : Power supply, only need to be specified if
> +    powered externally
> +
> +  - reset-gpios : One entry specifying the GPIO controlling /RESET.
> +    As defined in bindings/gpio.txt.
> +    Although optional, it is strongly recommended to use a hardware reset
> +
> +  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
> +    Documentation/devicetree/bindings/regulator/regulator.txt.
> +    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
> +    (all codecs)
> +
> +    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
> +    (all except CS47L85, WM1840)
> +
> +    The following following additional property is supported for the generator
> +    nodes:
> +      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
> +        capacitors attached.
> +
> +Example:
> +
> +codec: cs47l85@0 {

Node names should be generic.

You can swap these round if you want, so:

cs47l85: codec@0 {

... is valid.

> +	compatible = "cirrus,cs47l85";
> +	reg = <0>;
> +
> +	reset-gpios = <&gpio 0>;
> +
> +	MICBIAS1 {
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <3300000>;
> +		cirrus,ext-cap = <1>;
> +	};
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 02995c9..d28e53f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3266,7 +3266,10 @@ L:	[e-mail]
>  T:	git https://github.com/CirrusLogic/linux-drivers.git
>  W:	https://github.com/CirrusLogic/linux-drivers/wiki
>  S:	Supported
> +F:	Documentation/devicetree/bindings/mfd/madera.txt
>  F:	include/linux/mfd/madera/*
> +F:	drivers/mfd/madera*
> +F:	drivers/mfd/cs47l*
>  
>  CLEANCACHE API
>  M:	Konrad Rzeszutek Wilk <[e-mail]>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ce3a918..f0f9979 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -203,6 +203,29 @@ config MFD_CROS_EC_SPI
>  	  response time cannot be guaranteed, we support ignoring
>  	  'pre-amble' bytes before the response actually starts.
>  
> +config MFD_MADERA
> +	bool
> +	select REGMAP
> +	select MFD_CORE
> +
> +config MFD_MADERA_I2C
> +	tristate "Cirrus Logic Madera codecs with I2C"
> +	select MFD_MADERA
> +	select REGMAP_I2C
> +	depends on I2C
> +	help
> +	  Support for the Cirrus Logic Madera platform audio SoC
> +	  core functionality controlled via I2C.
> +
> +config MFD_MADERA_SPI
> +	tristate "Cirrus Logic Madera codecs with SPI"
> +	select MFD_MADERA
> +	select REGMAP_SPI
> +	depends on SPI_MASTER
> +	help
> +	  Support for the Cirrus Logic Madera platform audio SoC
> +	  core functionality controlled via SPI.
> +
>  config MFD_ASIC3
>  	bool "Compaq ASIC3"
>  	depends on GPIOLIB && ARM
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index fa86dbe..c41f6c9 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -72,6 +72,10 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
>  wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
>  obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
>  
> +obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
> +obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
> +obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
> +
>  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
>  obj-$(CONFIG_TPS65010)		+= tps65010.o
>  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
> new file mode 100644
> index 0000000..ab5fe9b
> --- /dev/null
> +++ b/drivers/mfd/madera-core.c
> @@ -0,0 +1,689 @@
> +/*
> + * Core MFD support for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#include <linux/mfd/madera/core.h>
> +#include <linux/mfd/madera/registers.h>
> +
> +#include "madera.h"
> +
> +#define CS47L35_SILICON_ID	0x6360
> +#define CS47L85_SILICON_ID	0x6338
> +#define CS47L90_SILICON_ID	0x6364
> +
> +#define MADERA_32KZ_MCLK2	1
> +
> +static const char * const madera_core_supplies[] = {
> +	"AVDD",
> +	"DBVDD1",
> +};
> +
> +static const struct mfd_cell madera_ldo1_devs[] = {
> +	{ .name = "madera-ldo1", .of_compatible = "cirrus,madera-ldo1" },
> +};
> +
> +static const struct mfd_cell cs47l35_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },

I believe this should be "interrupt-controller".

irq is ambiguous.

Same goes for the ones below.

> +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> +	{ .name = "cs47l35-codec",  .of_compatible = "cirrus,cs47l35-codec" },
> +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> +};
> +
> +static const struct mfd_cell cs47l85_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },
> +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> +	{ .name = "cs47l85-codec",  .of_compatible = "cirrus,cs47l85-codec" },
> +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> +};
> +
> +static const struct mfd_cell cs47l90_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },
> +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> +	{ .name = "cs47l90-codec",  .of_compatible = "cirrus,cs47l90-codec" },
> +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> +};
> +
> +const char *madera_name_from_type(enum madera_type type)
> +{
> +	switch (type) {
> +	case CS47L35:
> +		return "CS47L35";
> +	case CS47L85:
> +		return "CS47L85";
> +	case CS47L90:
> +		return "CS47L90";
> +	case CS47L91:
> +		return "CS47L91";
> +	case WM1840:
> +		return "WM1840";
> +	default:
> +		return "Unknown";
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_name_from_type);
> +
> +#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
> +#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
> +
> +static int madera_wait_for_boot(struct madera *madera)
> +{
> +	unsigned int val;
> +	int ret;
> +
> +	/*
> +	 * We can't use an interrupt as we need to runtime resume to do so,
> +	 * so we poll the status bit. This won't race with the interrupt
> +	 * handler because it will be blocked on runtime resume.
> +	 */
> +	ret = regmap_read_poll_timeout(madera->regmap,
> +				       MADERA_IRQ1_RAW_STATUS_1,
> +				       val,
> +				       (val & MADERA_BOOT_DONE_STS1),
> +				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
> +				       MADERA_BOOT_POLL_TIMEOUT_US);
> +	/*
> +	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
> +	 * Do this unconditionally to avoid interrupt storms
> +	 */
> +	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
> +		     MADERA_BOOT_DONE_EINT1);
> +
> +	if (ret)
> +		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);

Why isn't this under the call to regmap_read_poll_timeout()?

> +	pm_runtime_mark_last_busy(madera->dev);
> +
> +	return ret;
> +}
> +
> +static int madera_soft_reset(struct madera *madera)
> +{
> +	int ret;
> +
> +	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
> +	if (ret != 0) {
> +		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(1000, 2000);

Why have you chosen 1000 => 2000?

If you obtained specific information from the datasheet, please quote
it in the comment here.

> +	return 0;
> +}
> +
> +static void madera_enable_hard_reset(struct madera *madera)
> +{
> +	if (madera->reset_gpio)
> +		gpiod_set_value_cansleep(madera->reset_gpio, 0);
> +}
> +
> +static void madera_disable_hard_reset(struct madera *madera)
> +{
> +	if (madera->reset_gpio) {
> +		gpiod_set_value_cansleep(madera->reset_gpio, 1);
> +		usleep_range(1000, 2000);
> +	}
> +}
> +
> +#ifdef CONFIG_PM
> +static int madera_runtime_resume(struct device *dev)
> +{
> +	struct madera *madera = dev_get_drvdata(dev);
> +	int ret;
> +
> +	dev_dbg(madera->dev, "Leaving sleep mode\n");

Nit: Less code to just use 'dev', no?

> +	ret = regulator_enable(madera->dcvdd);
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to enable DCVDD: %d\n", ret);
> +		return ret;
> +	}
> +
> +	regcache_cache_only(madera->regmap, false);
> +	regcache_cache_only(madera->regmap_32bit, false);
> +
> +	ret = madera_wait_for_boot(madera);
> +	if (ret)
> +		goto err;
> +
> +	ret = regcache_sync(madera->regmap);
> +	if (ret) {
> +		dev_err(madera->dev,
> +			"Failed to restore 16-bit register cache\n");
> +		goto err;
> +	}
> +
> +	ret = regcache_sync(madera->regmap_32bit);
> +	if (ret) {
> +		dev_err(madera->dev,
> +			"Failed to restore 32-bit register cache\n");
> +		goto err;
> +	}
> +
> +	return 0;
> +
> +err:
> +	regcache_cache_only(madera->regmap_32bit, true);
> +	regcache_cache_only(madera->regmap, true);
> +	regulator_disable(madera->dcvdd);
> +
> +	return ret;
> +}
> +
> +static int madera_runtime_suspend(struct device *dev)
> +{
> +	struct madera *madera = dev_get_drvdata(dev);
> +
> +	dev_dbg(madera->dev, "Entering sleep mode\n");
> +
> +	regcache_cache_only(madera->regmap, true);
> +	regcache_mark_dirty(madera->regmap);
> +	regcache_cache_only(madera->regmap_32bit, true);
> +	regcache_mark_dirty(madera->regmap_32bit);
> +
> +	regulator_disable(madera->dcvdd);
> +
> +	return 0;
> +}
> +#endif
> +
> +const struct dev_pm_ops madera_pm_ops = {
> +	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
> +			   madera_runtime_resume,
> +			   NULL)
> +};
> +EXPORT_SYMBOL_GPL(madera_pm_ops);
> +
> +unsigned int madera_get_num_micbias(struct madera *madera)
> +{
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +		return 2;
> +	case CS47L85:
> +	case WM1840:
> +		return 4;
> +	case CS47L90:
> +	case CS47L91:
> +		return 2;
> +	default:
> +		dev_warn(madera->dev, "No micbias known for codec %s\n",
> +			 madera_name_from_type(madera->type));
> +		return 0;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_get_num_micbias);

Looks very subsystem specific.  Where is this called from?

> +unsigned int madera_get_num_childbias(struct madera *madera,
> +				      unsigned int micbias)
> +{
> +	/*
> +	 * micbias argument reserved for future codecs that don't
> +	 * have the same number of children on each micbias
> +	 */
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +		return 2;
> +	case CS47L85:
> +	case WM1840:
> +		return 0;
> +	case CS47L90:
> +	case CS47L91:
> +		return 4;
> +	default:
> +		dev_warn(madera->dev, "No child micbias known for codec %s\n",
> +			 madera_name_from_type(madera->type));
> +		return 0;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_get_num_childbias);

As above.

> +#ifdef CONFIG_OF
> +const struct of_device_id madera_of_match[] = {
> +	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
> +	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
> +	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
> +	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
> +	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
> +	{},
> +};
> +EXPORT_SYMBOL_GPL(madera_of_match);
> +
> +unsigned long madera_of_get_type(struct device *dev)
> +{
> +	const struct of_device_id *id = of_match_device(madera_of_match, dev);
> +
> +	if (id)
> +		return (unsigned long)id->data;
> +	else
> +		return 0;
> +}
> +EXPORT_SYMBOL_GPL(madera_of_get_type);
> +#endif
> +
> +static int madera_prop_get_core_pdata(struct madera *madera)

Will this ever do more than obtain a GPIO?

If not, please consider renaming the function.

> +{
> +	int ret;
> +
> +	madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
> +						     "reset",
> +						     GPIOD_OUT_LOW);
> +	if (IS_ERR(madera->reset_gpio)) {
> +		ret = PTR_ERR(madera->reset_gpio);
> +
> +		if (ret == -EPROBE_DEFER)
> +			return ret;
> +		else if ((ret < 0) && (ret != -EINVAL))
> +			dev_warn(madera->dev,
> +				 "DT property reset-gpio is malformed: %d\n",
> +				 ret);
> +	}

This hunk looks like it could be simplified.

> +	return 0;
> +}
> +
> +static void madera_configure_micbias(struct madera *madera)
> +{
> +	unsigned int num_micbias = madera_get_num_micbias(madera);
> +	struct madera_micbias_pdata *pdata;
> +	struct regulator_init_data *init_data;
> +	unsigned int num_child_micbias;
> +	unsigned int val, mask, reg;
> +	int i, j, ret;
> +
> +	for (i = 0; i < num_micbias; i++) {
> +		pdata = &madera->pdata.micbias[i];
> +		init_data = &pdata->init_data;
> +
> +		if (!init_data->constraints.max_uV &&
> +		    !init_data->constraints.valid_ops_mask)
> +			continue;	/* pdata not set */
> +
> +		/* Apply default for bypass mode */
> +		if (!init_data->constraints.max_uV)
> +			init_data->constraints.max_uV = 2800;
> +
> +		val = (init_data->constraints.max_uV - 1500000) / 100000;
> +		val <<= MADERA_MICB1_LVL_SHIFT;
> +
> +		mask = MADERA_MICB1_LVL_MASK | MADERA_MICB1_EXT_CAP |
> +			MADERA_MICB1_BYPASS | MADERA_MICB1_RATE;
> +
> +		if (pdata->ext_cap)
> +			val |= MADERA_MICB1_EXT_CAP;
> +
> +		/* if no child biases the discharge is set in the parent */
> +		num_child_micbias = madera_get_num_childbias(madera, i + 1);
> +		if (num_child_micbias == 0) {
> +			mask |= MADERA_MICB1_DISCH;
> +
> +			switch (init_data->constraints.active_discharge) {
> +			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
> +				val |= MADERA_MICB1_DISCH;
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +
> +		if (init_data->constraints.soft_start)
> +			val |= MADERA_MICB1_RATE;
> +
> +		if (init_data->constraints.valid_ops_mask &
> +		    REGULATOR_CHANGE_BYPASS)
> +			val |= MADERA_MICB1_BYPASS;
> +
> +		reg = MADERA_MIC_BIAS_CTRL_1 + i;
> +		ret = regmap_update_bits(madera->regmap, reg, mask, val);
> +		if (ret)
> +			dev_warn(madera->dev, "Failed to write 0x%x (%d)\n",
> +				 reg, ret);
> +
> +		dev_dbg(madera->dev, "Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
> +			i + 1, mask, val);
> +
> +		/* Configure the child micbias pins */
> +		val = 0;
> +		mask = 0;
> +		for (j = 0; j < num_child_micbias; j++) {
> +			mask |= (MADERA_MICB1A_DISCH << (j * 4));
> +
> +			init_data = &pdata->pin[j].init_data;
> +			switch (init_data->constraints.active_discharge) {
> +			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
> +				val |= (MADERA_MICB1A_DISCH << (j * 4));
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +
> +		if (mask) {
> +			reg = MADERA_MIC_BIAS_CTRL_5 + (i * 2);
> +			ret = regmap_update_bits(madera->regmap, reg, mask, val);
> +			if (ret)
> +				dev_warn(madera->dev,
> +					 "Failed to write 0x%x (%d)\n",
> +					 reg, ret);
> +
> +			dev_dbg(madera->dev,
> +				"Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
> +				i + 5, mask, val);
> +		}
> +	}
> +}

This 'stuff' looks like it should be moved out to the sub-device
drivers.

> +int madera_dev_init(struct madera *madera)
> +{
> +	struct device *dev = madera->dev;
> +	const char *name;
> +	unsigned int hwid;
> +	int (*patch_fn)(struct madera *) = NULL;
> +	const struct mfd_cell *mfd_devs;
> +	int n_devs = 0;
> +	int i, ret;
> +
> +	dev_set_drvdata(madera->dev, madera);
> +	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
> +
> +	if (dev_get_platdata(madera->dev)) {
> +		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
> +		       sizeof(madera->pdata));
> +
> +		/* We use 0 in pdata to indicate a GPIO has not been set */
> +		if (madera->pdata.reset > 0) {
> +			/* Start out with /RESET asserted */
> +			ret = devm_gpio_request_one(madera->dev,
> +						madera->pdata.reset,
> +						GPIOF_DIR_OUT | GPIOF_INIT_LOW,
> +						"madera reset");
> +			if (ret) {
> +				dev_err(dev, "Failed to request /RESET: %d\n",
> +					ret);
> +				return ret;
> +			}
> +
> +			madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
> +		}
> +	} else {
> +		ret = madera_prop_get_core_pdata(madera);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	if (!madera->reset_gpio)
> +		dev_warn(madera->dev,
> +			 "Running without reset GPIO is not recommended\n");

I suggest moving all of the above into madera_prop_get_core_pdata()
and renaming it to  madera_get_gpio().

It also looks like it could be simplified to reduce indentation.

> +	regcache_cache_only(madera->regmap, true);
> +	regcache_cache_only(madera->regmap_32bit, true);
> +
> +	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
> +		madera->core_supplies[i].supply = madera_core_supplies[i];
> +
> +	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +	case CS47L90:
> +	case CS47L91:

Perhaps a comment here to say why these devices do not require LDO1
devices.

> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> +				      madera_ldo1_devs,
> +				      ARRAY_SIZE(madera_ldo1_devs),
> +				      NULL, 0, NULL);
> +		if (ret != 0) {

Please use these checks in order of preference:

if (ret)
if (ret < 0)
if (ret != 0)

... depending on the situation.

Here the former will do.

> +			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
> +			return ret;
> +		}
> +		break;
> +	default:
> +		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
> +		return -ENODEV;
> +	}
> +
> +	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
> +				      madera->core_supplies);
> +	if (ret) {
> +		dev_err(dev, "Failed to request core supplies: %d\n", ret);
> +		goto err_devs;
> +	}
> +
> +	/*
> +	 * Don't use devres here because the only device we have to get
> +	 * against is the MFD device and DCVDD will likely be supplied by
> +	 * one of its children. Meaning that the regulator will be
> +	 * destroyed by the time devres calls regulator put.
> +	 */
> +	madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
> +	if (IS_ERR(madera->dcvdd)) {
> +		ret = PTR_ERR(madera->dcvdd);
> +		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
> +		goto err_devs;
> +	}
> +
> +	ret = regulator_bulk_enable(madera->num_core_supplies,
> +				    madera->core_supplies);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
> +		goto err_dcvdd;
> +	}
> +
> +	ret = regulator_enable(madera->dcvdd);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> +		goto err_enable;
> +	}
> +
> +	madera_disable_hard_reset(madera);
> +
> +	regcache_cache_only(madera->regmap, false);
> +	regcache_cache_only(madera->regmap_32bit, false);
> +
> +	/*
> +	 * Verify that this is a chip we know about before we
> +	 * starting doing any writes to its registers
> +	 */
> +	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
> +	if (ret) {
> +		dev_err(dev, "Failed to read ID register: %d\n", ret);
> +		goto err_reset;
> +	}
> +
> +	switch (hwid) {
> +	case CS47L35_SILICON_ID:
> +	case CS47L85_SILICON_ID:
> +	case CS47L90_SILICON_ID:
> +		break;
> +	default:
> +		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
> +		ret = -EINVAL;
> +		goto err_reset;
> +	}
> +
> +	/* If we don't have a reset GPIO use a soft reset */
> +	if (!madera->reset_gpio) {
> +		ret = madera_soft_reset(madera);
> +		if (ret)
> +			goto err_reset;
> +	}
> +
> +	ret = madera_wait_for_boot(madera);
> +	if (ret) {
> +		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
> +		goto err_reset;
> +	}
> +
> +	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
> +			  &madera->rev);
> +	if (ret) {
> +		dev_err(dev, "Failed to read revision register: %d\n", ret);
> +		goto err_reset;
> +	}
> +	madera->rev &= MADERA_HW_REVISION_MASK;
> +
> +	name = madera_name_from_type(madera->type);
> +
> +	switch (hwid) {
> +	case CS47L35_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			switch (madera->type) {
> +			case CS47L35:
> +				patch_fn = cs47l35_patch;
> +				mfd_devs = cs47l35_devs;
> +				n_devs = ARRAY_SIZE(cs47l35_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	case CS47L85_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			switch (madera->type) {
> +			case CS47L85:
> +			case WM1840:
> +				patch_fn = cs47l85_patch;
> +				mfd_devs = cs47l85_devs;
> +				n_devs = ARRAY_SIZE(cs47l85_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	case CS47L90_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			switch (madera->type) {
> +			case CS47L90:
> +			case CS47L91:
> +				patch_fn = cs47l90_patch;
> +				mfd_devs = cs47l90_devs;
> +				n_devs = ARRAY_SIZE(cs47l90_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (!n_devs) {
> +		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
> +		ret = -ENODEV;
> +		goto err_reset;
> +	}
> +
> +	dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
> +
> +	/* Apply hardware patch */
> +	if (patch_fn) {
> +		ret = patch_fn(madera);
> +		if (ret) {
> +			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
> +			goto err_reset;
> +		}
> +	}
> +
> +	/* Init 32k clock sourced from MCLK2 */
> +	ret = regmap_update_bits(madera->regmap,
> +			MADERA_CLOCK_32K_1,
> +			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
> +			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
> +		goto err_reset;
> +	}
> +
> +	madera_configure_micbias(madera);
> +
> +	pm_runtime_set_active(madera->dev);
> +	pm_runtime_enable(madera->dev);
> +	pm_runtime_set_autosuspend_delay(madera->dev, 100);
> +	pm_runtime_use_autosuspend(madera->dev);
> +
> +	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> +			      mfd_devs, n_devs,
> +			      NULL, 0, NULL);
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
> +		goto err_pm_runtime;
> +	}
> +
> +	return 0;
> +
> +err_pm_runtime:
> +	pm_runtime_disable(madera->dev);
> +err_reset:
> +	madera_enable_hard_reset(madera);
> +	regulator_disable(madera->dcvdd);
> +err_enable:
> +	regulator_bulk_disable(madera->num_core_supplies,
> +			       madera->core_supplies);
> +err_dcvdd:
> +	regulator_put(madera->dcvdd);
> +err_devs:
> +	mfd_remove_devices(dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_init);
> +
> +int madera_dev_exit(struct madera *madera)
> +{
> +	/* Prevent any IRQs being serviced while we clean up */
> +	disable_irq(madera->irq);
> +
> +	/*
> +	 * DCVDD could be supplied by a child node, we must disable it before
> +	 * removing the children, and prevent PM runtime from turning it back on
> +	 */
> +	pm_runtime_disable(madera->dev);
> +
> +	regulator_disable(madera->dcvdd);
> +	regulator_put(madera->dcvdd);
> +
> +	mfd_remove_devices(madera->dev);
> +	madera_enable_hard_reset(madera);
> +
> +	regulator_bulk_disable(madera->num_core_supplies,
> +			       madera->core_supplies);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_exit);
> diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
> new file mode 100644
> index 0000000..8c90780
> --- /dev/null
> +++ b/drivers/mfd/madera-i2c.c
> @@ -0,0 +1,130 @@
> +/*
> + * I2C bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +
> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_i2c_probe(struct i2c_client *i2c,
> +			    const struct i2c_device_id *id)
> +{
> +	struct madera *madera;
> +	const struct regmap_config *regmap_16bit_config = NULL;
> +	const struct regmap_config *regmap_32bit_config = NULL;
> +	unsigned long type;
> +	int ret;
> +
> +	if (i2c->dev.of_node)
> +		type = madera_of_get_type(&i2c->dev);

Just call this madera_get_type() and do the OF || !OF checking in
there.

> +	else
> +		type = id->driver_data;
> +
> +	switch (type) {
> +	case CS47L35:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
> +		}
> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
> +		}
> +		break;
> +	case CS47L90:
> +	case CS47L91:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
> +		}
> +		break;
> +	default:
> +		dev_err(&i2c->dev,
> +			"Unknown Madera I2C device type %ld\n", type);
> +		return -EINVAL;
> +	}
> +
> +	if (!regmap_16bit_config) {
> +		dev_err(&i2c->dev,
> +			"Kernel does not include support for %s\n",
> +			madera_name_from_type(type));
> +		return -EINVAL;
> +	}
> +
> +	madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
> +	if (!madera)
> +		return -ENOMEM;
> +
> +	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
> +	if (IS_ERR(madera->regmap)) {
> +		ret = PTR_ERR(madera->regmap);
> +		dev_err(&i2c->dev,
> +			"Failed to allocate 16-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
> +	if (IS_ERR(madera->regmap_32bit)) {
> +		ret = PTR_ERR(madera->regmap_32bit);
> +		dev_err(&i2c->dev,
> +			"Failed to allocate 32-bit register map: %d\n", ret);
> +		return ret;
> +	}
> +
> +	madera->type = type;
> +	madera->dev = &i2c->dev;
> +	madera->irq = i2c->irq;
> +
> +	return madera_dev_init(madera);
> +}
> +
> +static int madera_i2c_remove(struct i2c_client *i2c)
> +{
> +	struct madera *madera = dev_get_drvdata(&i2c->dev);
> +
> +	madera_dev_exit(madera);

Nit: \n here please.

> +	return 0;
> +}
> +
> +static const struct i2c_device_id madera_i2c_id[] = {
> +	{ "cs47l35", CS47L35 },
> +	{ "cs47l85", CS47L85 },
> +	{ "cs47l90", CS47L90 },
> +	{ "cs47l91", CS47L91 },
> +	{ "wm1840", WM1840 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
> +
> +static struct i2c_driver madera_i2c_driver = {
> +	.driver = {
> +		.name	= "madera",
> +		.pm	= &madera_pm_ops,
> +		.of_match_table	= of_match_ptr(madera_of_match),
> +	},
> +	.probe		= madera_i2c_probe,
> +	.remove		= madera_i2c_remove,
> +	.id_table	= madera_i2c_id,
> +};
> +
> +module_i2c_driver(madera_i2c_driver);
> +
> +MODULE_DESCRIPTION("Madera I2C bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
> new file mode 100644
> index 0000000..e7e13f0
> --- /dev/null
> +++ b/drivers/mfd/madera-spi.c
> @@ -0,0 +1,131 @@
> +/*
> + * SPI bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +#include <linux/spi/spi.h>
> +
> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_spi_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +	struct madera *madera;
> +	const struct regmap_config *regmap_16bit_config = NULL;
> +	const struct regmap_config *regmap_32bit_config = NULL;
> +	unsigned long type;
> +	int ret;
> +
> +	if (spi->dev.of_node)
> +		type = madera_of_get_type(&spi->dev);
> +	else
> +		type = id->driver_data;

As above.

> +	switch (type) {
> +	case CS47L35:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			regmap_16bit_config = &cs47l35_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l35_32bit_spi_regmap;
> +		}
> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			regmap_16bit_config = &cs47l85_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l85_32bit_spi_regmap;
> +		}
> +		break;
> +	case CS47L90:
> +	case CS47L91:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			regmap_16bit_config = &cs47l90_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l90_32bit_spi_regmap;
> +		}
> +		break;
> +	default:
> +		dev_err(&spi->dev,
> +			"Unknown Madera SPI device type %ld\n", type);
> +		return -EINVAL;
> +	}
> +
> +	if (!regmap_16bit_config) {
> +		dev_err(&spi->dev,
> +			"Kernel does not include support for %s\n",
> +			madera_name_from_type(type));
> +		return -EINVAL;
> +	}
> +
> +	madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
> +	if (!madera)
> +		return -ENOMEM;
> +
> +	madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
> +	if (IS_ERR(madera->regmap)) {
> +		ret = PTR_ERR(madera->regmap);
> +		dev_err(&spi->dev,
> +			"Failed to allocate 16-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
> +	if (IS_ERR(madera->regmap_32bit)) {
> +		ret = PTR_ERR(madera->regmap_32bit);
> +		dev_err(&spi->dev,
> +			"Failed to allocate 32-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->type = type;
> +	madera->dev = &spi->dev;
> +	madera->irq = spi->irq;
> +
> +	return madera_dev_init(madera);
> +}
> +
> +static int madera_spi_remove(struct spi_device *spi)
> +{
> +	struct madera *madera = spi_get_drvdata(spi);
> +
> +	madera_dev_exit(madera);

As above.

> +	return 0;
> +}
> +
> +static const struct spi_device_id madera_spi_ids[] = {
> +	{ "cs47l35", CS47L35 },
> +	{ "cs47l85", CS47L85 },
> +	{ "cs47l90", CS47L90 },
> +	{ "cs47l91", CS47L91 },
> +	{ "wm1840", WM1840 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(spi, madera_spi_ids);
> +
> +static struct spi_driver madera_spi_driver = {
> +	.driver = {
> +		.name	= "madera",
> +		.owner	= THIS_MODULE,
> +		.pm	= &madera_pm_ops,
> +		.of_match_table	= of_match_ptr(madera_of_match),
> +	},
> +	.probe		= madera_spi_probe,
> +	.remove		= madera_spi_remove,
> +	.id_table	= madera_spi_ids,
> +};
> +
> +module_spi_driver(madera_spi_driver);
> +
> +MODULE_DESCRIPTION("Madera SPI bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
> new file mode 100644
> index 0000000..57f6add
> --- /dev/null
> +++ b/drivers/mfd/madera.h
> @@ -0,0 +1,52 @@
> +/*
> + * madera.h  --  MFD internals for Cirrus Logic Madera codecs

Please remove the file name from this header.

> + * Copyright 2015-2016 Cirrus Logic

This needs updating.

> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_MFD_H
> +#define MADERA_MFD_H
> +
> +#include <linux/pm.h>
> +#include <linux/of.h>

Alphabetical.

> +struct madera;
> +
> +extern const struct dev_pm_ops madera_pm_ops;
> +extern const struct of_device_id madera_of_match[];
> +
> +int madera_dev_init(struct madera *madera);
> +int madera_dev_exit(struct madera *madera);
> +
> +#ifdef CONFIG_OF
> +unsigned long madera_of_get_type(struct device *dev);
> +#else
> +static inline unsigned long madera_of_get_type(struct device *dev)
> +{
> +	return 0;
> +}
> +#endif

If you move to a generic get_type approach you can remove these
lines.

> +extern const struct regmap_config cs47l35_16bit_spi_regmap;
> +extern const struct regmap_config cs47l35_32bit_spi_regmap;
> +extern const struct regmap_config cs47l35_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l35_32bit_i2c_regmap;
> +int cs47l35_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l85_16bit_spi_regmap;
> +extern const struct regmap_config cs47l85_32bit_spi_regmap;
> +extern const struct regmap_config cs47l85_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l85_32bit_i2c_regmap;
> +int cs47l85_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l90_16bit_spi_regmap;
> +extern const struct regmap_config cs47l90_32bit_spi_regmap;
> +extern const struct regmap_config cs47l90_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l90_32bit_i2c_regmap;
> +int cs47l90_patch(struct madera *madera);

Where do these live?

> +#endif
> diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
> new file mode 100644
> index 0000000..59b05f8
> --- /dev/null
> +++ b/include/linux/mfd/madera/core.h
> @@ -0,0 +1,175 @@
> +/*
> + * MFD internals for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_CORE_H
> +#define MADERA_CORE_H
> +
> +#include <linux/interrupt.h>
> +#include <linux/regmap.h>
> +#include <linux/notifier.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/mfd/madera/pdata.h>
> +#include <linux/irqchip/irq-madera.h>
> +#include <sound/madera-pdata.h>

Alphabetical.

> +enum madera_type {
> +	CS47L35 = 1,
> +	CS47L85 = 2,
> +	CS47L90 = 3,
> +	CS47L91 = 4,
> +	WM1840 = 7,
> +};
> +
> +#define MADERA_MAX_CORE_SUPPLIES	2
> +#define MADERA_MAX_GPIOS		40
> +
> +#define CS47L35_NUM_GPIOS		16
> +#define CS47L85_NUM_GPIOS		40
> +#define CS47L90_NUM_GPIOS		38
> +
> +
> +/* Notifier events */
> +#define MADERA_NOTIFY_VOICE_TRIGGER	0x1
> +#define MADERA_NOTIFY_HPDET		0x2
> +#define MADERA_NOTIFY_MICDET		0x4
> +
> +/* GPIO Function Definitions */
> +#define MADERA_GP_FN_ALTERNATE		0x00
> +#define MADERA_GP_FN_GPIO		0x01
> +#define MADERA_GP_FN_DSP_GPIO		0x02
> +#define MADERA_GP_FN_IRQ1		0x03
> +#define MADERA_GP_FN_IRQ2		0x04
> +#define MADERA_GP_FN_FLL1_CLOCK		0x10
> +#define MADERA_GP_FN_FLL2_CLOCK		0x11
> +#define MADERA_GP_FN_FLL3_CLOCK		0x12
> +#define MADERA_GP_FN_FLLAO_CLOCK	0x13
> +#define MADERA_GP_FN_FLL1_LOCK		0x18
> +#define MADERA_GP_FN_FLL2_LOCK		0x19
> +#define MADERA_GP_FN_FLL3_LOCK		0x1A
> +#define MADERA_GP_FN_FLLAO_LOCK		0x1B
> +#define MADERA_GP_FN_OPCLK_OUT		0x40
> +#define MADERA_GP_FN_OPCLK_ASYNC_OUT	0x41
> +#define MADERA_GP_FN_PWM1		0x48
> +#define MADERA_GP_FN_PWM2		0x49
> +#define MADERA_GP_FN_SPDIF_OUT		0x4C
> +#define MADERA_GP_FN_HEADPHONE_DET	0x50
> +#define MADERA_GP_FN_MIC_DET		0x58
> +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT	0x80
> +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT	0x81
> +#define MADERA_GP_FN_ASRC1_IN1_LOCK	0x88
> +#define MADERA_GP_FN_ASRC1_IN2_LOCK	0x89
> +#define MADERA_GP_FN_ASRC2_IN1_LOCK	0x8A
> +#define MADERA_GP_FN_ASRC2_IN2_LOCK	0x8B
> +#define MADERA_GP_FN_DSP_IRQ1		0xA0
> +#define MADERA_GP_FN_DSP_IRQ2		0xA1
> +#define MADERA_GP_FN_DSP_IRQ3		0xA2
> +#define MADERA_GP_FN_DSP_IRQ4		0xA3
> +#define MADERA_GP_FN_DSP_IRQ5		0xA4
> +#define MADERA_GP_FN_DSP_IRQ6		0xA5
> +#define MADERA_GP_FN_DSP_IRQ7		0xA6
> +#define MADERA_GP_FN_DSP_IRQ8		0xA7
> +#define MADERA_GP_FN_DSP_IRQ9		0xA8
> +#define MADERA_GP_FN_DSP_IRQ10		0xA9
> +#define MADERA_GP_FN_DSP_IRQ11		0xAA
> +#define MADERA_GP_FN_DSP_IRQ12		0xAB
> +#define MADERA_GP_FN_DSP_IRQ13		0xAC
> +#define MADERA_GP_FN_DSP_IRQ14		0xAD
> +#define MADERA_GP_FN_DSP_IRQ15		0xAE
> +#define MADERA_GP_FN_DSP_IRQ16		0xAF
> +#define MADERA_GP_FN_HPOUT1L_SC		0xB0
> +#define MADERA_GP_FN_HPOUT1R_SC		0xB1
> +#define MADERA_GP_FN_HPOUT2L_SC		0xB2
> +#define MADERA_GP_FN_HPOUT2R_SC		0xB3
> +#define MADERA_GP_FN_HPOUT3L_SC		0xB4
> +#define MADERA_GP_FN_HPOUT4R_SC		0xB5
> +#define MADERA_GP_FN_SPKOUTL_SC		0xB6
> +#define MADERA_GP_FN_SPKOUTR_SC		0xB7
> +#define MADERA_GP_FN_HPOUT1L_ENA	0xC0
> +#define MADERA_GP_FN_HPOUT1R_ENA	0xC1
> +#define MADERA_GP_FN_HPOUT2L_ENA	0xC2
> +#define MADERA_GP_FN_HPOUT2R_ENA	0xC3
> +#define MADERA_GP_FN_HPOUT3L_ENA	0xC4
> +#define MADERA_GP_FN_HPOUT4R_ENA	0xC5
> +#define MADERA_GP_FN_SPKOUTL_ENA	0xC6
> +#define MADERA_GP_FN_SPKOUTR_ENA	0xC7
> +#define MADERA_GP_FN_HPOUT1L_DIS	0xD0
> +#define MADERA_GP_FN_HPOUT1R_DIS	0xD1
> +#define MADERA_GP_FN_HPOUT2L_DIS	0xD2
> +#define MADERA_GP_FN_HPOUT2R_DIS	0xD3
> +#define MADERA_GP_FN_HPOUT3L_DIS	0xD4
> +#define MADERA_GP_FN_HPOUT4R_DIS	0xD5
> +#define MADERA_GP_FN_SPKOUTL_DIS	0xD6
> +#define MADERA_GP_FN_SPKOUTR_DIS	0xD7
> +#define MADERA_GP_FN_SPK_SHUTDOWN	0xE0
> +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN	0xE1
> +#define MADERA_GP_FN_SPK_OVH_WARN	0xE2
> +#define MADERA_GP_FN_TIMER1_STATUS	0x140
> +#define MADERA_GP_FN_TIMER2_STATUS	0x141
> +#define MADERA_GP_FN_TIMER3_STATUS	0x142
> +#define MADERA_GP_FN_TIMER4_STATUS	0x143
> +#define MADERA_GP_FN_TIMER5_STATUS	0x144
> +#define MADERA_GP_FN_TIMER6_STATUS	0x145
> +#define MADERA_GP_FN_TIMER7_STATUS	0x146
> +#define MADERA_GP_FN_TIMER8_STATUS	0x147
> +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS	0x150
> +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS	0x151
> +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS	0x152
> +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS	0x153
> +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS	0x154
> +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS	0x155
> +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS	0x156
> +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS	0x157
> +
> +struct snd_soc_dapm_context;
> +
> +struct madera {
> +	struct regmap *regmap;
> +	struct regmap *regmap_32bit;
> +
> +	struct device *dev;
> +
> +	enum madera_type type;
> +	unsigned int rev;
> +
> +	struct gpio_desc *reset_gpio;
> +
> +	int num_core_supplies;
> +	struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
> +	struct regulator *dcvdd;
> +	bool internal_dcvdd;
> +
> +	struct madera_pdata pdata;
> +
> +	struct device *irq_dev;
> +	int irq;
> +
> +	unsigned int out_clamp[MADERA_MAX_OUTPUT];
> +	unsigned int out_shorted[MADERA_MAX_OUTPUT];
> +	unsigned int hp_ena;
> +
> +	struct snd_soc_dapm_context *dapm;
> +
> +	struct blocking_notifier_head notifier;
> +};

Please supply a kerneldoc header for this struct.

> +unsigned int madera_get_num_micbias(struct madera *madera);
> +unsigned int madera_get_num_childbias(struct madera *madera,
> +				      unsigned int micbias);
> +
> +const char *madera_name_from_type(enum madera_type type);
> +
> +static inline int madera_call_notifiers(struct madera *madera,
> +					unsigned long event,
> +					void *data)
> +{
> +	return blocking_notifier_call_chain(&madera->notifier, event, data);
> +}
> +#endif
> diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
> new file mode 100644
> index 0000000..6d930aa
> --- /dev/null
> +++ b/include/linux/mfd/madera/pdata.h
> @@ -0,0 +1,88 @@
> +/*
> + * Platform data for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_PDATA_H
> +#define MADERA_PDATA_H
> +
> +#include <linux/kernel.h>
> +#include <linux/regulator/machine.h>
> +

Why the '\n'?

> +#include <linux/regulator/madera-ldo1.h>
> +#include <linux/regulator/madera-micsupp.h>
> +#include <linux/irqchip/irq-madera-pdata.h>
> +#include <sound/madera-pdata.h>

Alphabetical

> +#define MADERA_MAX_MICBIAS		4
> +#define MADERA_MAX_CHILD_MICBIAS	4
> +
> +#define MADERA_MAX_GPSW			2
> +
> +struct pinctrl_map;
> +
> +/** MICBIAS pin configuration */

Kerneldoc comment with no kerneldoc ??

Same as below.

> +struct madera_micbias_pin_pdata {
> +	/** Regulator configuration for pin switch */

Just use Kerneldoc instead.

Same for all of these structs.

> +	struct regulator_init_data init_data;
> +};
> +
> +/** Regulator configuration for an on-chip MICBIAS */
> +struct madera_micbias_pdata {
> +	/** Configuration of the MICBIAS generator */
> +	struct regulator_init_data init_data;
> +
> +	bool ext_cap;    /** External capacitor fitted */
> +
> +	/**
> +	 * Configuration for each output pin from this MICBIAS
> +	 * (Not used on CS47L85 and WM1840)
> +	 */
> +	struct madera_micbias_pin_pdata pin[MADERA_MAX_CHILD_MICBIAS];
> +};
> +
> +struct madera_pdata {
> +	/** GPIO controlling /RESET, if any */
> +	int reset;
> +
> +	/** Substruct of pdata for the LDO1 regulator */
> +	struct madera_ldo1_pdata ldo1;
> +
> +	/** Substruct of pdata for the MICSUPP regulator */
> +	struct madera_micsupp_pdata micsupp;
> +
> +	/** Substruct of pdata for the irqchip driver */
> +	struct madera_irqchip_pdata irqchip;
> +
> +	/** Base GPIO */
> +	int gpio_base;
> +
> +	/**
> +	 * Array of GPIO configurations
> +	 * See Documentation/pinctrl.txt
> +	 */
> +	const struct pinctrl_map *gpio_configs;
> +	int n_gpio_configs;
> +
> +	/** MICBIAS configurations */
> +	struct madera_micbias_pdata micbias[MADERA_MAX_MICBIAS];
> +
> +	/**
> +	 * Substructure of pdata for the ASoC codec driver
> +	 * See include/sound/madera-pdata.h
> +	 */
> +	struct madera_codec_pdata codec;
> +
> +	/**
> +	 * General purpose switch mode setting
> +	 * See the SW1_MODE field in the datasheet for the available values
> +	 */
> +	u32 gpsw[MADERA_MAX_GPSW];
> +};
> +
> +#endif

Richard Fitzgerald April 19, 2017, 4:42 p.m. UTC | #2

On Wed, 2017-04-12 at 13:54 +0100, Lee Jones wrote:
> On Wed, 05 Apr 2017, Richard Fitzgerald wrote:
> 
> > This adds the generic core support for Cirrus Logic "Madera" class codecs.
> > These are complex audio codec SoCs with a variety of digital and analogue
> > I/O, onboard audio processing and DSPs, and other features.
> > 
> > These codecs are all based off a common set of hardware IP so can be
> > supported by a core of common code (with a few minor device-to-device
> > variations).
> > 
> > Signed-off-by: Charles Keepax <[e-mail]>
> > Signed-off-by: Nikesh Oswal <[e-mail]>
> > Signed-off-by: Richard Fitzgerald <[e-mail]>
> > ---
> >  Documentation/devicetree/bindings/mfd/madera.txt |  79 +++
> >  MAINTAINERS                                      |   3 +
> >  drivers/mfd/Kconfig                              |  23 +
> >  drivers/mfd/Makefile                             |   4 +
> >  drivers/mfd/madera-core.c                        | 689 +++++++++++++++++++++++
> >  drivers/mfd/madera-i2c.c                         | 130 +++++
> >  drivers/mfd/madera-spi.c                         | 131 +++++
> >  drivers/mfd/madera.h                             |  52 ++
> >  include/linux/mfd/madera/core.h                  | 175 ++++++
> >  include/linux/mfd/madera/pdata.h                 |  88 +++
> >  10 files changed, 1374 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt
> >  create mode 100644 drivers/mfd/madera-core.c
> >  create mode 100644 drivers/mfd/madera-i2c.c
> >  create mode 100644 drivers/mfd/madera-spi.c
> >  create mode 100644 drivers/mfd/madera.h
> >  create mode 100644 include/linux/mfd/madera/core.h
> >  create mode 100644 include/linux/mfd/madera/pdata.h
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
> > new file mode 100644
> > index 0000000..a6c3260
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/madera.txt
> > @@ -0,0 +1,79 @@
> > +Cirrus Logic Madera class audio codecs multi-function device
> > +
> > +These devices are audio SoCs with extensive digital capabilities and a range
> > +of analogue I/O.
> > +
> > +See also the child driver bindings in:
> > +bindings/extcon/extcon-madera.txt
> > +bindings/gpio/gpio-madera.txt
> > +bindings/interrupt-controller/cirrus,madera.txt
> > +bindings/pinctrl/cirrus,madera-pinctrl.txt
> > +bindings/regulator/madera-ldo1.txt
> > +bindings/regulator/madera-micsupp.txt
> > +bindings/sound/madera.txt
> > +
> > +Required properties:
> > +
> > +  - compatible : One of the following chip-specific strings:
> > +        "cirrus,cs47l35"
> > +        "cirrus,cs47l85"
> > +        "cirrus,cs47l90"
> > +        "cirrus,cs47l91"
> > +        "cirrus,wm1840"
> > +
> > +  - reg : I2C slave address when connected using I2C, chip select number when
> > +    using SPI.
> > +
> > +  - DCVDD-supply : Power supply for the device as defined in
> > +    bindings/regulator/regulator.txt
> > +    Mandatory on CS47L35, CS47L90, CS47L91
> > +    Optional on CS47L85, WM1840
> > +
> > +  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
> > +    Power supplies for the device
> > +
> > +  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
> > +    (CS47L85, CS47L90, CS47L91, WM1840)
> > +
> > +  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
> > +    (CS47L85, WM1840)
> > +
> > +  - SPKVDD-supply : Power supply for the device
> > +    (CS47L35)
> > +
> > +Optional properties:
> > +
> > +  - MICVDD-supply : Power supply, only need to be specified if
> > +    powered externally
> > +
> > +  - reset-gpios : One entry specifying the GPIO controlling /RESET.
> > +    As defined in bindings/gpio.txt.
> > +    Although optional, it is strongly recommended to use a hardware reset
> > +
> > +  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
> > +    Documentation/devicetree/bindings/regulator/regulator.txt.
> > +    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
> > +    (all codecs)
> > +
> > +    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
> > +    (all except CS47L85, WM1840)
> > +
> > +    The following following additional property is supported for the generator
> > +    nodes:
> > +      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
> > +        capacitors attached.
> > +
> > +Example:
> > +
> > +codec: cs47l85@0 {
> 
> Node names should be generic.
> 
> You can swap these round if you want, so:
> 
> cs47l85: codec@0 {
> 
> ... is valid.
> 
> > +	compatible = "cirrus,cs47l85";
> > +	reg = <0>;
> > +
> > +	reset-gpios = <&gpio 0>;
> > +
> > +	MICBIAS1 {
> > +		regulator-min-microvolt = <900000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		cirrus,ext-cap = <1>;
> > +	};
> > +};
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 02995c9..d28e53f 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -3266,7 +3266,10 @@ L:	[e-mail]
> >  T:	git https://github.com/CirrusLogic/linux-drivers.git
> >  W:	https://github.com/CirrusLogic/linux-drivers/wiki
> >  S:	Supported
> > +F:	Documentation/devicetree/bindings/mfd/madera.txt
> >  F:	include/linux/mfd/madera/*
> > +F:	drivers/mfd/madera*
> > +F:	drivers/mfd/cs47l*
> >  
> >  CLEANCACHE API
> >  M:	Konrad Rzeszutek Wilk <[e-mail]>
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index ce3a918..f0f9979 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -203,6 +203,29 @@ config MFD_CROS_EC_SPI
> >  	  response time cannot be guaranteed, we support ignoring
> >  	  'pre-amble' bytes before the response actually starts.
> >  
> > +config MFD_MADERA
> > +	bool
> > +	select REGMAP
> > +	select MFD_CORE
> > +
> > +config MFD_MADERA_I2C
> > +	tristate "Cirrus Logic Madera codecs with I2C"
> > +	select MFD_MADERA
> > +	select REGMAP_I2C
> > +	depends on I2C
> > +	help
> > +	  Support for the Cirrus Logic Madera platform audio SoC
> > +	  core functionality controlled via I2C.
> > +
> > +config MFD_MADERA_SPI
> > +	tristate "Cirrus Logic Madera codecs with SPI"
> > +	select MFD_MADERA
> > +	select REGMAP_SPI
> > +	depends on SPI_MASTER
> > +	help
> > +	  Support for the Cirrus Logic Madera platform audio SoC
> > +	  core functionality controlled via SPI.
> > +
> >  config MFD_ASIC3
> >  	bool "Compaq ASIC3"
> >  	depends on GPIOLIB && ARM
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index fa86dbe..c41f6c9 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -72,6 +72,10 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
> >  wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
> >  obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
> >  
> > +obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
> > +obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
> > +obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
> > +
> >  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
> >  obj-$(CONFIG_TPS65010)		+= tps65010.o
> >  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> > diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
> > new file mode 100644
> > index 0000000..ab5fe9b
> > --- /dev/null
> > +++ b/drivers/mfd/madera-core.c
> > @@ -0,0 +1,689 @@
> > +/*
> > + * Core MFD support for Cirrus Logic Madera codecs
> > + *
> > + * Copyright 2015-2017 Cirrus Logic
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/notifier.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/regulator/machine.h>
> > +#include <linux/regulator/of_regulator.h>
> > +
> > +#include <linux/mfd/madera/core.h>
> > +#include <linux/mfd/madera/registers.h>
> > +
> > +#include "madera.h"
> > +
> > +#define CS47L35_SILICON_ID	0x6360
> > +#define CS47L85_SILICON_ID	0x6338
> > +#define CS47L90_SILICON_ID	0x6364
> > +
> > +#define MADERA_32KZ_MCLK2	1
> > +
> > +static const char * const madera_core_supplies[] = {
> > +	"AVDD",
> > +	"DBVDD1",
> > +};
> > +
> > +static const struct mfd_cell madera_ldo1_devs[] = {
> > +	{ .name = "madera-ldo1", .of_compatible = "cirrus,madera-ldo1" },
> > +};
> > +
> > +static const struct mfd_cell cs47l35_devs[] = {
> > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > +	{ .name = "madera-irq", },
> 
> I believe this should be "interrupt-controller".
> 

I don't think that's the case. I checked other irchip drivers and they
have no particular standard naming. At least one is called
"something-irq", none are called "something-interrupt-controller"

> irq is ambiguous.
> 

I can't really see what other driver this could be confused with,
especially as it's specified as madera-* so the alternative drivers are
limited. Given the limited set of drivers I think it's clear enough it's
the driver for the IRQ and a longer name doesn't add information.

> Same goes for the ones below.
> 

Ditto. madera-micsupp will be replaced by the existing arizona-micsupp.
Most gpio drivers are called "something-gpio". Extcon is the name of a
driver subsystem so should be sufficiently clear. Likewise madera-codec.

> > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > +	{ .name = "cs47l35-codec",  .of_compatible = "cirrus,cs47l35-codec" },
> > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > +};
> > +
> > +static const struct mfd_cell cs47l85_devs[] = {
> > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > +	{ .name = "madera-irq", },
> > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > +	{ .name = "cs47l85-codec",  .of_compatible = "cirrus,cs47l85-codec" },
> > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > +};
> > +
> > +static const struct mfd_cell cs47l90_devs[] = {
> > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > +	{ .name = "madera-irq", },
> > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > +	{ .name = "cs47l90-codec",  .of_compatible = "cirrus,cs47l90-codec" },
> > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > +};
> > +
> > +const char *madera_name_from_type(enum madera_type type)
> > +{
> > +	switch (type) {
> > +	case CS47L35:
> > +		return "CS47L35";
> > +	case CS47L85:
> > +		return "CS47L85";
> > +	case CS47L90:
> > +		return "CS47L90";
> > +	case CS47L91:
> > +		return "CS47L91";
> > +	case WM1840:
> > +		return "WM1840";
> > +	default:
> > +		return "Unknown";
> > +	}
> > +}
> > +EXPORT_SYMBOL_GPL(madera_name_from_type);
> > +
> > +#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
> > +#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
> > +
> > +static int madera_wait_for_boot(struct madera *madera)
> > +{
> > +	unsigned int val;
> > +	int ret;
> > +
> > +	/*
> > +	 * We can't use an interrupt as we need to runtime resume to do so,
> > +	 * so we poll the status bit. This won't race with the interrupt
> > +	 * handler because it will be blocked on runtime resume.
> > +	 */
> > +	ret = regmap_read_poll_timeout(madera->regmap,
> > +				       MADERA_IRQ1_RAW_STATUS_1,
> > +				       val,
> > +				       (val & MADERA_BOOT_DONE_STS1),
> > +				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
> > +				       MADERA_BOOT_POLL_TIMEOUT_US);
> > +	/*
> > +	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
> > +	 * Do this unconditionally to avoid interrupt storms
> > +	 */
> > +	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
> > +		     MADERA_BOOT_DONE_EINT1);
> > +
> > +	if (ret)
> > +		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
> 
> Why isn't this under the call to regmap_read_poll_timeout()?
> 

It was intended to make it clear that we must ack the BOOT_DONE now no
matter what and to avoid the potential with them the other way around of
someone adding more code in the if (or just a ret) and so accidentally
failing to do the ack. I could swap them but I think I prefer keeping
them this way and changing the comment to say this.

> > +	pm_runtime_mark_last_busy(madera->dev);
> > +
> > +	return ret;
> > +}
> > +
> > +static int madera_soft_reset(struct madera *madera)
> > +{
> > +	int ret;
> > +
> > +	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
> > +	if (ret != 0) {
> > +		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
> > +		return ret;
> > +	}
> > +	usleep_range(1000, 2000);
> 
> Why have you chosen 1000 => 2000?
> 
> If you obtained specific information from the datasheet, please quote
> it in the comment here.
> 
> > +	return 0;
> > +}
> > +
> > +static void madera_enable_hard_reset(struct madera *madera)
> > +{
> > +	if (madera->reset_gpio)
> > +		gpiod_set_value_cansleep(madera->reset_gpio, 0);
> > +}
> > +
> > +static void madera_disable_hard_reset(struct madera *madera)
> > +{
> > +	if (madera->reset_gpio) {
> > +		gpiod_set_value_cansleep(madera->reset_gpio, 1);
> > +		usleep_range(1000, 2000);
> > +	}
> > +}
> > +
> > +#ifdef CONFIG_PM
> > +static int madera_runtime_resume(struct device *dev)
> > +{
> > +	struct madera *madera = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	dev_dbg(madera->dev, "Leaving sleep mode\n");
> 
> Nit: Less code to just use 'dev', no?
> 
> > +	ret = regulator_enable(madera->dcvdd);
> > +	if (ret) {
> > +		dev_err(madera->dev, "Failed to enable DCVDD: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	regcache_cache_only(madera->regmap, false);
> > +	regcache_cache_only(madera->regmap_32bit, false);
> > +
> > +	ret = madera_wait_for_boot(madera);
> > +	if (ret)
> > +		goto err;
> > +
> > +	ret = regcache_sync(madera->regmap);
> > +	if (ret) {
> > +		dev_err(madera->dev,
> > +			"Failed to restore 16-bit register cache\n");
> > +		goto err;
> > +	}
> > +
> > +	ret = regcache_sync(madera->regmap_32bit);
> > +	if (ret) {
> > +		dev_err(madera->dev,
> > +			"Failed to restore 32-bit register cache\n");
> > +		goto err;
> > +	}
> > +
> > +	return 0;
> > +
> > +err:
> > +	regcache_cache_only(madera->regmap_32bit, true);
> > +	regcache_cache_only(madera->regmap, true);
> > +	regulator_disable(madera->dcvdd);
> > +
> > +	return ret;
> > +}
> > +
> > +static int madera_runtime_suspend(struct device *dev)
> > +{
> > +	struct madera *madera = dev_get_drvdata(dev);
> > +
> > +	dev_dbg(madera->dev, "Entering sleep mode\n");
> > +
> > +	regcache_cache_only(madera->regmap, true);
> > +	regcache_mark_dirty(madera->regmap);
> > +	regcache_cache_only(madera->regmap_32bit, true);
> > +	regcache_mark_dirty(madera->regmap_32bit);
> > +
> > +	regulator_disable(madera->dcvdd);
> > +
> > +	return 0;
> > +}
> > +#endif
> > +
> > +const struct dev_pm_ops madera_pm_ops = {
> > +	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
> > +			   madera_runtime_resume,
> > +			   NULL)
> > +};
> > +EXPORT_SYMBOL_GPL(madera_pm_ops);
> > +
> > +unsigned int madera_get_num_micbias(struct madera *madera)
> > +{
> > +
> > +	switch (madera->type) {
> > +	case CS47L35:
> > +		return 2;
> > +	case CS47L85:
> > +	case WM1840:
> > +		return 4;
> > +	case CS47L90:
> > +	case CS47L91:
> > +		return 2;
> > +	default:
> > +		dev_warn(madera->dev, "No micbias known for codec %s\n",
> > +			 madera_name_from_type(madera->type));
> > +		return 0;
> > +	}
> > +}
> > +EXPORT_SYMBOL_GPL(madera_get_num_micbias);
> 
> Looks very subsystem specific.  Where is this called from?
> 

Child drivers will use this. It's a global property of the chip, not
specific to one particular subsystem, so I don't see a better place than
the parent MFD. 

> > +unsigned int madera_get_num_childbias(struct madera *madera,
> > +				      unsigned int micbias)
> > +{
> > +	/*
> > +	 * micbias argument reserved for future codecs that don't
> > +	 * have the same number of children on each micbias
> > +	 */
> > +
> > +	switch (madera->type) {
> > +	case CS47L35:
> > +		return 2;
> > +	case CS47L85:
> > +	case WM1840:
> > +		return 0;
> > +	case CS47L90:
> > +	case CS47L91:
> > +		return 4;
> > +	default:
> > +		dev_warn(madera->dev, "No child micbias known for codec %s\n",
> > +			 madera_name_from_type(madera->type));
> > +		return 0;
> > +	}
> > +}
> > +EXPORT_SYMBOL_GPL(madera_get_num_childbias);
> 
> As above.
> 

Reason as above

> > +#ifdef CONFIG_OF
> > +const struct of_device_id madera_of_match[] = {
> > +	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
> > +	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
> > +	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
> > +	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
> > +	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
> > +	{},
> > +};
> > +EXPORT_SYMBOL_GPL(madera_of_match);
> > +
> > +unsigned long madera_of_get_type(struct device *dev)
> > +{
> > +	const struct of_device_id *id = of_match_device(madera_of_match, dev);
> > +
> > +	if (id)
> > +		return (unsigned long)id->data;
> > +	else
> > +		return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(madera_of_get_type);
> > +#endif
> > +
> > +static int madera_prop_get_core_pdata(struct madera *madera)
> 
> Will this ever do more than obtain a GPIO?
> 
> If not, please consider renaming the function.
> 
> > +{
> > +	int ret;
> > +
> > +	madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
> > +						     "reset",
> > +						     GPIOD_OUT_LOW);
> > +	if (IS_ERR(madera->reset_gpio)) {
> > +		ret = PTR_ERR(madera->reset_gpio);
> > +
> > +		if (ret == -EPROBE_DEFER)
> > +			return ret;
> > +		else if ((ret < 0) && (ret != -EINVAL))
> > +			dev_warn(madera->dev,
> > +				 "DT property reset-gpio is malformed: %d\n",
> > +				 ret);
> > +	}
> 
> This hunk looks like it could be simplified.
> 
> > +	return 0;
> > +}
> > +
> > +static void madera_configure_micbias(struct madera *madera)
> > +{
> > +	unsigned int num_micbias = madera_get_num_micbias(madera);
> > +	struct madera_micbias_pdata *pdata;
> > +	struct regulator_init_data *init_data;
> > +	unsigned int num_child_micbias;
> > +	unsigned int val, mask, reg;
> > +	int i, j, ret;
> > +
> > +	for (i = 0; i < num_micbias; i++) {
> > +		pdata = &madera->pdata.micbias[i];
> > +		init_data = &pdata->init_data;
> > +
> > +		if (!init_data->constraints.max_uV &&
> > +		    !init_data->constraints.valid_ops_mask)
> > +			continue;	/* pdata not set */
> > +
> > +		/* Apply default for bypass mode */
> > +		if (!init_data->constraints.max_uV)
> > +			init_data->constraints.max_uV = 2800;
> > +
> > +		val = (init_data->constraints.max_uV - 1500000) / 100000;
> > +		val <<= MADERA_MICB1_LVL_SHIFT;
> > +
> > +		mask = MADERA_MICB1_LVL_MASK | MADERA_MICB1_EXT_CAP |
> > +			MADERA_MICB1_BYPASS | MADERA_MICB1_RATE;
> > +
> > +		if (pdata->ext_cap)
> > +			val |= MADERA_MICB1_EXT_CAP;
> > +
> > +		/* if no child biases the discharge is set in the parent */
> > +		num_child_micbias = madera_get_num_childbias(madera, i + 1);
> > +		if (num_child_micbias == 0) {
> > +			mask |= MADERA_MICB1_DISCH;
> > +
> > +			switch (init_data->constraints.active_discharge) {
> > +			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
> > +				val |= MADERA_MICB1_DISCH;
> > +				break;
> > +			default:
> > +				break;
> > +			}
> > +		}
> > +
> > +		if (init_data->constraints.soft_start)
> > +			val |= MADERA_MICB1_RATE;
> > +
> > +		if (init_data->constraints.valid_ops_mask &
> > +		    REGULATOR_CHANGE_BYPASS)
> > +			val |= MADERA_MICB1_BYPASS;
> > +
> > +		reg = MADERA_MIC_BIAS_CTRL_1 + i;
> > +		ret = regmap_update_bits(madera->regmap, reg, mask, val);
> > +		if (ret)
> > +			dev_warn(madera->dev, "Failed to write 0x%x (%d)\n",
> > +				 reg, ret);
> > +
> > +		dev_dbg(madera->dev, "Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
> > +			i + 1, mask, val);
> > +
> > +		/* Configure the child micbias pins */
> > +		val = 0;
> > +		mask = 0;
> > +		for (j = 0; j < num_child_micbias; j++) {
> > +			mask |= (MADERA_MICB1A_DISCH << (j * 4));
> > +
> > +			init_data = &pdata->pin[j].init_data;
> > +			switch (init_data->constraints.active_discharge) {
> > +			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
> > +				val |= (MADERA_MICB1A_DISCH << (j * 4));
> > +				break;
> > +			default:
> > +				break;
> > +			}
> > +		}
> > +
> > +		if (mask) {
> > +			reg = MADERA_MIC_BIAS_CTRL_5 + (i * 2);
> > +			ret = regmap_update_bits(madera->regmap, reg, mask, val);
> > +			if (ret)
> > +				dev_warn(madera->dev,
> > +					 "Failed to write 0x%x (%d)\n",
> > +					 reg, ret);
> > +
> > +			dev_dbg(madera->dev,
> > +				"Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
> > +				i + 5, mask, val);
> > +		}
> > +	}
> > +}
> 
> This 'stuff' looks like it should be moved out to the sub-device
> drivers.
> 
> > +int madera_dev_init(struct madera *madera)
> > +{
> > +	struct device *dev = madera->dev;
> > +	const char *name;
> > +	unsigned int hwid;
> > +	int (*patch_fn)(struct madera *) = NULL;
> > +	const struct mfd_cell *mfd_devs;
> > +	int n_devs = 0;
> > +	int i, ret;
> > +
> > +	dev_set_drvdata(madera->dev, madera);
> > +	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
> > +
> > +	if (dev_get_platdata(madera->dev)) {
> > +		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
> > +		       sizeof(madera->pdata));
> > +
> > +		/* We use 0 in pdata to indicate a GPIO has not been set */
> > +		if (madera->pdata.reset > 0) {
> > +			/* Start out with /RESET asserted */
> > +			ret = devm_gpio_request_one(madera->dev,
> > +						madera->pdata.reset,
> > +						GPIOF_DIR_OUT | GPIOF_INIT_LOW,
> > +						"madera reset");
> > +			if (ret) {
> > +				dev_err(dev, "Failed to request /RESET: %d\n",
> > +					ret);
> > +				return ret;
> > +			}
> > +
> > +			madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
> > +		}
> > +	} else {
> > +		ret = madera_prop_get_core_pdata(madera);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	if (!madera->reset_gpio)
> > +		dev_warn(madera->dev,
> > +			 "Running without reset GPIO is not recommended\n");
> 
> I suggest moving all of the above into madera_prop_get_core_pdata()
> and renaming it to  madera_get_gpio().
> 
> It also looks like it could be simplified to reduce indentation.
> 
> > +	regcache_cache_only(madera->regmap, true);
> > +	regcache_cache_only(madera->regmap_32bit, true);
> > +
> > +	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
> > +		madera->core_supplies[i].supply = madera_core_supplies[i];
> > +
> > +	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
> > +
> > +	switch (madera->type) {
> > +	case CS47L35:
> > +	case CS47L90:
> > +	case CS47L91:
> 
> Perhaps a comment here to say why these devices do not require LDO1
> devices.
> 
> > +		break;
> > +	case CS47L85:
> > +	case WM1840:
> > +		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> > +				      madera_ldo1_devs,
> > +				      ARRAY_SIZE(madera_ldo1_devs),
> > +				      NULL, 0, NULL);
> > +		if (ret != 0) {
> 
> Please use these checks in order of preference:
> 
> if (ret)
> if (ret < 0)
> if (ret != 0)
> 
> ... depending on the situation.
> 
> Here the former will do.
> 
> > +			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
> > +			return ret;
> > +		}
> > +		break;
> > +	default:
> > +		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
> > +		return -ENODEV;
> > +	}
> > +
> > +	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
> > +				      madera->core_supplies);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to request core supplies: %d\n", ret);
> > +		goto err_devs;
> > +	}
> > +
> > +	/*
> > +	 * Don't use devres here because the only device we have to get
> > +	 * against is the MFD device and DCVDD will likely be supplied by
> > +	 * one of its children. Meaning that the regulator will be
> > +	 * destroyed by the time devres calls regulator put.
> > +	 */
> > +	madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
> > +	if (IS_ERR(madera->dcvdd)) {
> > +		ret = PTR_ERR(madera->dcvdd);
> > +		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
> > +		goto err_devs;
> > +	}
> > +
> > +	ret = regulator_bulk_enable(madera->num_core_supplies,
> > +				    madera->core_supplies);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
> > +		goto err_dcvdd;
> > +	}
> > +
> > +	ret = regulator_enable(madera->dcvdd);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> > +		goto err_enable;
> > +	}
> > +
> > +	madera_disable_hard_reset(madera);
> > +
> > +	regcache_cache_only(madera->regmap, false);
> > +	regcache_cache_only(madera->regmap_32bit, false);
> > +
> > +	/*
> > +	 * Verify that this is a chip we know about before we
> > +	 * starting doing any writes to its registers
> > +	 */
> > +	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to read ID register: %d\n", ret);
> > +		goto err_reset;
> > +	}
> > +
> > +	switch (hwid) {
> > +	case CS47L35_SILICON_ID:
> > +	case CS47L85_SILICON_ID:
> > +	case CS47L90_SILICON_ID:
> > +		break;
> > +	default:
> > +		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
> > +		ret = -EINVAL;
> > +		goto err_reset;
> > +	}
> > +
> > +	/* If we don't have a reset GPIO use a soft reset */
> > +	if (!madera->reset_gpio) {
> > +		ret = madera_soft_reset(madera);
> > +		if (ret)
> > +			goto err_reset;
> > +	}
> > +
> > +	ret = madera_wait_for_boot(madera);
> > +	if (ret) {
> > +		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
> > +		goto err_reset;
> > +	}
> > +
> > +	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
> > +			  &madera->rev);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to read revision register: %d\n", ret);
> > +		goto err_reset;
> > +	}
> > +	madera->rev &= MADERA_HW_REVISION_MASK;
> > +
> > +	name = madera_name_from_type(madera->type);
> > +
> > +	switch (hwid) {
> > +	case CS47L35_SILICON_ID:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> > +			switch (madera->type) {
> > +			case CS47L35:
> > +				patch_fn = cs47l35_patch;
> > +				mfd_devs = cs47l35_devs;
> > +				n_devs = ARRAY_SIZE(cs47l35_devs);
> > +				break;
> > +			default:
> > +				break;
> > +			}
> > +		}
> > +		break;
> > +	case CS47L85_SILICON_ID:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> > +			switch (madera->type) {
> > +			case CS47L85:
> > +			case WM1840:
> > +				patch_fn = cs47l85_patch;
> > +				mfd_devs = cs47l85_devs;
> > +				n_devs = ARRAY_SIZE(cs47l85_devs);
> > +				break;
> > +			default:
> > +				break;
> > +			}
> > +		}
> > +		break;
> > +	case CS47L90_SILICON_ID:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> > +			switch (madera->type) {
> > +			case CS47L90:
> > +			case CS47L91:
> > +				patch_fn = cs47l90_patch;
> > +				mfd_devs = cs47l90_devs;
> > +				n_devs = ARRAY_SIZE(cs47l90_devs);
> > +				break;
> > +			default:
> > +				break;
> > +			}
> > +		}
> > +		break;
> > +	default:
> > +		break;
> > +	}
> > +
> > +	if (!n_devs) {
> > +		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
> > +		ret = -ENODEV;
> > +		goto err_reset;
> > +	}
> > +
> > +	dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
> > +
> > +	/* Apply hardware patch */
> > +	if (patch_fn) {
> > +		ret = patch_fn(madera);
> > +		if (ret) {
> > +			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
> > +			goto err_reset;
> > +		}
> > +	}
> > +
> > +	/* Init 32k clock sourced from MCLK2 */
> > +	ret = regmap_update_bits(madera->regmap,
> > +			MADERA_CLOCK_32K_1,
> > +			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
> > +			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
> > +	if (ret) {
> > +		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
> > +		goto err_reset;
> > +	}
> > +
> > +	madera_configure_micbias(madera);
> > +
> > +	pm_runtime_set_active(madera->dev);
> > +	pm_runtime_enable(madera->dev);
> > +	pm_runtime_set_autosuspend_delay(madera->dev, 100);
> > +	pm_runtime_use_autosuspend(madera->dev);
> > +
> > +	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> > +			      mfd_devs, n_devs,
> > +			      NULL, 0, NULL);
> > +	if (ret) {
> > +		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
> > +		goto err_pm_runtime;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_pm_runtime:
> > +	pm_runtime_disable(madera->dev);
> > +err_reset:
> > +	madera_enable_hard_reset(madera);
> > +	regulator_disable(madera->dcvdd);
> > +err_enable:
> > +	regulator_bulk_disable(madera->num_core_supplies,
> > +			       madera->core_supplies);
> > +err_dcvdd:
> > +	regulator_put(madera->dcvdd);
> > +err_devs:
> > +	mfd_remove_devices(dev);
> > +
> > +	return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(madera_dev_init);
> > +
> > +int madera_dev_exit(struct madera *madera)
> > +{
> > +	/* Prevent any IRQs being serviced while we clean up */
> > +	disable_irq(madera->irq);
> > +
> > +	/*
> > +	 * DCVDD could be supplied by a child node, we must disable it before
> > +	 * removing the children, and prevent PM runtime from turning it back on
> > +	 */
> > +	pm_runtime_disable(madera->dev);
> > +
> > +	regulator_disable(madera->dcvdd);
> > +	regulator_put(madera->dcvdd);
> > +
> > +	mfd_remove_devices(madera->dev);
> > +	madera_enable_hard_reset(madera);
> > +
> > +	regulator_bulk_disable(madera->num_core_supplies,
> > +			       madera->core_supplies);
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(madera_dev_exit);
> > diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
> > new file mode 100644
> > index 0000000..8c90780
> > --- /dev/null
> > +++ b/drivers/mfd/madera-i2c.c
> > @@ -0,0 +1,130 @@
> > +/*
> > + * I2C bus interface to Cirrus Logic Madera codecs
> > + *
> > + * Copyright 2015-2017 Cirrus Logic
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/of.h>
> > +
> > +#include <linux/mfd/madera/core.h>
> > +
> > +#include "madera.h"
> > +
> > +static int madera_i2c_probe(struct i2c_client *i2c,
> > +			    const struct i2c_device_id *id)
> > +{
> > +	struct madera *madera;
> > +	const struct regmap_config *regmap_16bit_config = NULL;
> > +	const struct regmap_config *regmap_32bit_config = NULL;
> > +	unsigned long type;
> > +	int ret;
> > +
> > +	if (i2c->dev.of_node)
> > +		type = madera_of_get_type(&i2c->dev);
> 
> Just call this madera_get_type() 

That would be ambiguous about what type information we are getting. As
the codecs have an ID it's possible we may in the future want to use
auto-detection to override or refine the "compatible" info, the
madera->type is the ID we're going to run with so we need to make it
clear that this is the OF type info.

> and do the OF || !OF checking in
> there.
> 

I tried rearranging the code like that but it just made it more complex
and less clear. I like the original way. Bear in mind that that the
alternative ID (if there's no DT) is in different structs depending
whether it's I2C or SPI so that can't be fetched by a generic function
and passing it in as an arg just obscures what's going on at this point
in the code. I think I like this original version for clarity of what's
happening, though I've renamed the function to madera_get_type_from_of.

> > +	else
> > +		type = id->driver_data;
> > +
> > +	switch (type) {
> > +	case CS47L35:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> > +			regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
> > +			regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
> > +		}
> > +		break;
> > +	case CS47L85:
> > +	case WM1840:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> > +			regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
> > +			regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
> > +		}
> > +		break;
> > +	case CS47L90:
> > +	case CS47L91:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> > +			regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
> > +			regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
> > +		}
> > +		break;
> > +	default:
> > +		dev_err(&i2c->dev,
> > +			"Unknown Madera I2C device type %ld\n", type);
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!regmap_16bit_config) {
> > +		dev_err(&i2c->dev,
> > +			"Kernel does not include support for %s\n",
> > +			madera_name_from_type(type));
> > +		return -EINVAL;
> > +	}
> > +
> > +	madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
> > +	if (!madera)
> > +		return -ENOMEM;
> > +
> > +	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
> > +	if (IS_ERR(madera->regmap)) {
> > +		ret = PTR_ERR(madera->regmap);
> > +		dev_err(&i2c->dev,
> > +			"Failed to allocate 16-bit register map: %d\n",	ret);
> > +		return ret;
> > +	}
> > +
> > +	madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
> > +	if (IS_ERR(madera->regmap_32bit)) {
> > +		ret = PTR_ERR(madera->regmap_32bit);
> > +		dev_err(&i2c->dev,
> > +			"Failed to allocate 32-bit register map: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	madera->type = type;
> > +	madera->dev = &i2c->dev;
> > +	madera->irq = i2c->irq;
> > +
> > +	return madera_dev_init(madera);
> > +}
> > +
> > +static int madera_i2c_remove(struct i2c_client *i2c)
> > +{
> > +	struct madera *madera = dev_get_drvdata(&i2c->dev);
> > +
> > +	madera_dev_exit(madera);
> 
> Nit: \n here please.
> 
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id madera_i2c_id[] = {
> > +	{ "cs47l35", CS47L35 },
> > +	{ "cs47l85", CS47L85 },
> > +	{ "cs47l90", CS47L90 },
> > +	{ "cs47l91", CS47L91 },
> > +	{ "wm1840", WM1840 },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
> > +
> > +static struct i2c_driver madera_i2c_driver = {
> > +	.driver = {
> > +		.name	= "madera",
> > +		.pm	= &madera_pm_ops,
> > +		.of_match_table	= of_match_ptr(madera_of_match),
> > +	},
> > +	.probe		= madera_i2c_probe,
> > +	.remove		= madera_i2c_remove,
> > +	.id_table	= madera_i2c_id,
> > +};
> > +
> > +module_i2c_driver(madera_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("Madera I2C bus interface");
> > +MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
> > new file mode 100644
> > index 0000000..e7e13f0
> > --- /dev/null
> > +++ b/drivers/mfd/madera-spi.c
> > @@ -0,0 +1,131 @@
> > +/*
> > + * SPI bus interface to Cirrus Logic Madera codecs
> > + *
> > + * Copyright 2015-2017 Cirrus Logic
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/of.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#include <linux/mfd/madera/core.h>
> > +
> > +#include "madera.h"
> > +
> > +static int madera_spi_probe(struct spi_device *spi)
> > +{
> > +	const struct spi_device_id *id = spi_get_device_id(spi);
> > +	struct madera *madera;
> > +	const struct regmap_config *regmap_16bit_config = NULL;
> > +	const struct regmap_config *regmap_32bit_config = NULL;
> > +	unsigned long type;
> > +	int ret;
> > +
> > +	if (spi->dev.of_node)
> > +		type = madera_of_get_type(&spi->dev);
> > +	else
> > +		type = id->driver_data;
> 
> As above.
> 
> > +	switch (type) {
> > +	case CS47L35:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> > +			regmap_16bit_config = &cs47l35_16bit_spi_regmap;
> > +			regmap_32bit_config = &cs47l35_32bit_spi_regmap;
> > +		}
> > +		break;
> > +	case CS47L85:
> > +	case WM1840:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> > +			regmap_16bit_config = &cs47l85_16bit_spi_regmap;
> > +			regmap_32bit_config = &cs47l85_32bit_spi_regmap;
> > +		}
> > +		break;
> > +	case CS47L90:
> > +	case CS47L91:
> > +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> > +			regmap_16bit_config = &cs47l90_16bit_spi_regmap;
> > +			regmap_32bit_config = &cs47l90_32bit_spi_regmap;
> > +		}
> > +		break;
> > +	default:
> > +		dev_err(&spi->dev,
> > +			"Unknown Madera SPI device type %ld\n", type);
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!regmap_16bit_config) {
> > +		dev_err(&spi->dev,
> > +			"Kernel does not include support for %s\n",
> > +			madera_name_from_type(type));
> > +		return -EINVAL;
> > +	}
> > +
> > +	madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
> > +	if (!madera)
> > +		return -ENOMEM;
> > +
> > +	madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
> > +	if (IS_ERR(madera->regmap)) {
> > +		ret = PTR_ERR(madera->regmap);
> > +		dev_err(&spi->dev,
> > +			"Failed to allocate 16-bit register map: %d\n",	ret);
> > +		return ret;
> > +	}
> > +
> > +	madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
> > +	if (IS_ERR(madera->regmap_32bit)) {
> > +		ret = PTR_ERR(madera->regmap_32bit);
> > +		dev_err(&spi->dev,
> > +			"Failed to allocate 32-bit register map: %d\n",	ret);
> > +		return ret;
> > +	}
> > +
> > +	madera->type = type;
> > +	madera->dev = &spi->dev;
> > +	madera->irq = spi->irq;
> > +
> > +	return madera_dev_init(madera);
> > +}
> > +
> > +static int madera_spi_remove(struct spi_device *spi)
> > +{
> > +	struct madera *madera = spi_get_drvdata(spi);
> > +
> > +	madera_dev_exit(madera);
> 
> As above.
> 
> > +	return 0;
> > +}
> > +
> > +static const struct spi_device_id madera_spi_ids[] = {
> > +	{ "cs47l35", CS47L35 },
> > +	{ "cs47l85", CS47L85 },
> > +	{ "cs47l90", CS47L90 },
> > +	{ "cs47l91", CS47L91 },
> > +	{ "wm1840", WM1840 },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(spi, madera_spi_ids);
> > +
> > +static struct spi_driver madera_spi_driver = {
> > +	.driver = {
> > +		.name	= "madera",
> > +		.owner	= THIS_MODULE,
> > +		.pm	= &madera_pm_ops,
> > +		.of_match_table	= of_match_ptr(madera_of_match),
> > +	},
> > +	.probe		= madera_spi_probe,
> > +	.remove		= madera_spi_remove,
> > +	.id_table	= madera_spi_ids,
> > +};
> > +
> > +module_spi_driver(madera_spi_driver);
> > +
> > +MODULE_DESCRIPTION("Madera SPI bus interface");
> > +MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
> > new file mode 100644
> > index 0000000..57f6add
> > --- /dev/null
> > +++ b/drivers/mfd/madera.h
> > @@ -0,0 +1,52 @@
> > +/*
> > + * madera.h  --  MFD internals for Cirrus Logic Madera codecs
> 
> Please remove the file name from this header.
> 
> > + * Copyright 2015-2016 Cirrus Logic
> 
> This needs updating.
> 
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef MADERA_MFD_H
> > +#define MADERA_MFD_H
> > +
> > +#include <linux/pm.h>
> > +#include <linux/of.h>
> 
> Alphabetical.
> 
> > +struct madera;
> > +
> > +extern const struct dev_pm_ops madera_pm_ops;
> > +extern const struct of_device_id madera_of_match[];
> > +
> > +int madera_dev_init(struct madera *madera);
> > +int madera_dev_exit(struct madera *madera);
> > +
> > +#ifdef CONFIG_OF
> > +unsigned long madera_of_get_type(struct device *dev);
> > +#else
> > +static inline unsigned long madera_of_get_type(struct device *dev)
> > +{
> > +	return 0;
> > +}
> > +#endif
> 
> If you move to a generic get_type approach you can remove these
> lines.
> 
> > +extern const struct regmap_config cs47l35_16bit_spi_regmap;
> > +extern const struct regmap_config cs47l35_32bit_spi_regmap;
> > +extern const struct regmap_config cs47l35_16bit_i2c_regmap;
> > +extern const struct regmap_config cs47l35_32bit_i2c_regmap;
> > +int cs47l35_patch(struct madera *madera);
> > +
> > +extern const struct regmap_config cs47l85_16bit_spi_regmap;
> > +extern const struct regmap_config cs47l85_32bit_spi_regmap;
> > +extern const struct regmap_config cs47l85_16bit_i2c_regmap;
> > +extern const struct regmap_config cs47l85_32bit_i2c_regmap;
> > +int cs47l85_patch(struct madera *madera);
> > +
> > +extern const struct regmap_config cs47l90_16bit_spi_regmap;
> > +extern const struct regmap_config cs47l90_32bit_spi_regmap;
> > +extern const struct regmap_config cs47l90_16bit_i2c_regmap;
> > +extern const struct regmap_config cs47l90_32bit_i2c_regmap;
> > +int cs47l90_patch(struct madera *madera);
> 
> Where do these live?
> 

In the other files added by the following 3 patches.

> > +#endif
> > diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
> > new file mode 100644
> > index 0000000..59b05f8
> > --- /dev/null
> > +++ b/include/linux/mfd/madera/core.h
> > @@ -0,0 +1,175 @@
> > +/*
> > + * MFD internals for Cirrus Logic Madera codecs
> > + *
> > + * Copyright 2015-2017 Cirrus Logic
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef MADERA_CORE_H
> > +#define MADERA_CORE_H
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/regmap.h>
> > +#include <linux/notifier.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/mfd/madera/pdata.h>
> > +#include <linux/irqchip/irq-madera.h>
> > +#include <sound/madera-pdata.h>
> 
> Alphabetical.
> 
> > +enum madera_type {
> > +	CS47L35 = 1,
> > +	CS47L85 = 2,
> > +	CS47L90 = 3,
> > +	CS47L91 = 4,
> > +	WM1840 = 7,
> > +};
> > +
> > +#define MADERA_MAX_CORE_SUPPLIES	2
> > +#define MADERA_MAX_GPIOS		40
> > +
> > +#define CS47L35_NUM_GPIOS		16
> > +#define CS47L85_NUM_GPIOS		40
> > +#define CS47L90_NUM_GPIOS		38
> > +
> > +
> > +/* Notifier events */
> > +#define MADERA_NOTIFY_VOICE_TRIGGER	0x1
> > +#define MADERA_NOTIFY_HPDET		0x2
> > +#define MADERA_NOTIFY_MICDET		0x4
> > +
> > +/* GPIO Function Definitions */
> > +#define MADERA_GP_FN_ALTERNATE		0x00
> > +#define MADERA_GP_FN_GPIO		0x01
> > +#define MADERA_GP_FN_DSP_GPIO		0x02
> > +#define MADERA_GP_FN_IRQ1		0x03
> > +#define MADERA_GP_FN_IRQ2		0x04
> > +#define MADERA_GP_FN_FLL1_CLOCK		0x10
> > +#define MADERA_GP_FN_FLL2_CLOCK		0x11
> > +#define MADERA_GP_FN_FLL3_CLOCK		0x12
> > +#define MADERA_GP_FN_FLLAO_CLOCK	0x13
> > +#define MADERA_GP_FN_FLL1_LOCK		0x18
> > +#define MADERA_GP_FN_FLL2_LOCK		0x19
> > +#define MADERA_GP_FN_FLL3_LOCK		0x1A
> > +#define MADERA_GP_FN_FLLAO_LOCK		0x1B
> > +#define MADERA_GP_FN_OPCLK_OUT		0x40
> > +#define MADERA_GP_FN_OPCLK_ASYNC_OUT	0x41
> > +#define MADERA_GP_FN_PWM1		0x48
> > +#define MADERA_GP_FN_PWM2		0x49
> > +#define MADERA_GP_FN_SPDIF_OUT		0x4C
> > +#define MADERA_GP_FN_HEADPHONE_DET	0x50
> > +#define MADERA_GP_FN_MIC_DET		0x58
> > +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT	0x80
> > +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT	0x81
> > +#define MADERA_GP_FN_ASRC1_IN1_LOCK	0x88
> > +#define MADERA_GP_FN_ASRC1_IN2_LOCK	0x89
> > +#define MADERA_GP_FN_ASRC2_IN1_LOCK	0x8A
> > +#define MADERA_GP_FN_ASRC2_IN2_LOCK	0x8B
> > +#define MADERA_GP_FN_DSP_IRQ1		0xA0
> > +#define MADERA_GP_FN_DSP_IRQ2		0xA1
> > +#define MADERA_GP_FN_DSP_IRQ3		0xA2
> > +#define MADERA_GP_FN_DSP_IRQ4		0xA3
> > +#define MADERA_GP_FN_DSP_IRQ5		0xA4
> > +#define MADERA_GP_FN_DSP_IRQ6		0xA5
> > +#define MADERA_GP_FN_DSP_IRQ7		0xA6
> > +#define MADERA_GP_FN_DSP_IRQ8		0xA7
> > +#define MADERA_GP_FN_DSP_IRQ9		0xA8
> > +#define MADERA_GP_FN_DSP_IRQ10		0xA9
> > +#define MADERA_GP_FN_DSP_IRQ11		0xAA
> > +#define MADERA_GP_FN_DSP_IRQ12		0xAB
> > +#define MADERA_GP_FN_DSP_IRQ13		0xAC
> > +#define MADERA_GP_FN_DSP_IRQ14		0xAD
> > +#define MADERA_GP_FN_DSP_IRQ15		0xAE
> > +#define MADERA_GP_FN_DSP_IRQ16		0xAF
> > +#define MADERA_GP_FN_HPOUT1L_SC		0xB0
> > +#define MADERA_GP_FN_HPOUT1R_SC		0xB1
> > +#define MADERA_GP_FN_HPOUT2L_SC		0xB2
> > +#define MADERA_GP_FN_HPOUT2R_SC		0xB3
> > +#define MADERA_GP_FN_HPOUT3L_SC		0xB4
> > +#define MADERA_GP_FN_HPOUT4R_SC		0xB5
> > +#define MADERA_GP_FN_SPKOUTL_SC		0xB6
> > +#define MADERA_GP_FN_SPKOUTR_SC		0xB7
> > +#define MADERA_GP_FN_HPOUT1L_ENA	0xC0
> > +#define MADERA_GP_FN_HPOUT1R_ENA	0xC1
> > +#define MADERA_GP_FN_HPOUT2L_ENA	0xC2
> > +#define MADERA_GP_FN_HPOUT2R_ENA	0xC3
> > +#define MADERA_GP_FN_HPOUT3L_ENA	0xC4
> > +#define MADERA_GP_FN_HPOUT4R_ENA	0xC5
> > +#define MADERA_GP_FN_SPKOUTL_ENA	0xC6
> > +#define MADERA_GP_FN_SPKOUTR_ENA	0xC7
> > +#define MADERA_GP_FN_HPOUT1L_DIS	0xD0
> > +#define MADERA_GP_FN_HPOUT1R_DIS	0xD1
> > +#define MADERA_GP_FN_HPOUT2L_DIS	0xD2
> > +#define MADERA_GP_FN_HPOUT2R_DIS	0xD3
> > +#define MADERA_GP_FN_HPOUT3L_DIS	0xD4
> > +#define MADERA_GP_FN_HPOUT4R_DIS	0xD5
> > +#define MADERA_GP_FN_SPKOUTL_DIS	0xD6
> > +#define MADERA_GP_FN_SPKOUTR_DIS	0xD7
> > +#define MADERA_GP_FN_SPK_SHUTDOWN	0xE0
> > +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN	0xE1
> > +#define MADERA_GP_FN_SPK_OVH_WARN	0xE2
> > +#define MADERA_GP_FN_TIMER1_STATUS	0x140
> > +#define MADERA_GP_FN_TIMER2_STATUS	0x141
> > +#define MADERA_GP_FN_TIMER3_STATUS	0x142
> > +#define MADERA_GP_FN_TIMER4_STATUS	0x143
> > +#define MADERA_GP_FN_TIMER5_STATUS	0x144
> > +#define MADERA_GP_FN_TIMER6_STATUS	0x145
> > +#define MADERA_GP_FN_TIMER7_STATUS	0x146
> > +#define MADERA_GP_FN_TIMER8_STATUS	0x147
> > +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS	0x150
> > +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS	0x151
> > +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS	0x152
> > +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS	0x153
> > +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS	0x154
> > +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS	0x155
> > +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS	0x156
> > +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS	0x157
> > +
> > +struct snd_soc_dapm_context;
> > +
> > +struct madera {
> > +	struct regmap *regmap;
> > +	struct regmap *regmap_32bit;
> > +
> > +	struct device *dev;
> > +
> > +	enum madera_type type;
> > +	unsigned int rev;
> > +
> > +	struct gpio_desc *reset_gpio;
> > +
> > +	int num_core_supplies;
> > +	struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
> > +	struct regulator *dcvdd;
> > +	bool internal_dcvdd;
> > +
> > +	struct madera_pdata pdata;
> > +
> > +	struct device *irq_dev;
> > +	int irq;
> > +
> > +	unsigned int out_clamp[MADERA_MAX_OUTPUT];
> > +	unsigned int out_shorted[MADERA_MAX_OUTPUT];
> > +	unsigned int hp_ena;
> > +
> > +	struct snd_soc_dapm_context *dapm;
> > +
> > +	struct blocking_notifier_head notifier;
> > +};
> 
> Please supply a kerneldoc header for this struct.
> 

It's internal to the madera drivers, only for use by the child drivers
so I don't think a kerneldoc makes sense but I can add a comment to
state that it's internal

> > +unsigned int madera_get_num_micbias(struct madera *madera);
> > +unsigned int madera_get_num_childbias(struct madera *madera,
> > +				      unsigned int micbias);
> > +
> > +const char *madera_name_from_type(enum madera_type type);
> > +
> > +static inline int madera_call_notifiers(struct madera *madera,
> > +					unsigned long event,
> > +					void *data)
> > +{
> > +	return blocking_notifier_call_chain(&madera->notifier, event, data);
> > +}
> > +#endif
> > diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
> > new file mode 100644
> > index 0000000..6d930aa
> > --- /dev/null
> > +++ b/include/linux/mfd/madera/pdata.h
> > @@ -0,0 +1,88 @@
> > +/*
> > + * Platform data for Cirrus Logic Madera codecs
> > + *
> > + * Copyright 2015-2017 Cirrus Logic
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef MADERA_PDATA_H
> > +#define MADERA_PDATA_H
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/regulator/machine.h>
> > +
> 
> Why the '\n'?
> 
> > +#include <linux/regulator/madera-ldo1.h>
> > +#include <linux/regulator/madera-micsupp.h>
> > +#include <linux/irqchip/irq-madera-pdata.h>
> > +#include <sound/madera-pdata.h>
> 
> Alphabetical
> 
> > +#define MADERA_MAX_MICBIAS		4
> > +#define MADERA_MAX_CHILD_MICBIAS	4
> > +
> > +#define MADERA_MAX_GPSW			2
> > +
> > +struct pinctrl_map;
> > +
> > +/** MICBIAS pin configuration */
> 
> Kerneldoc comment with no kerneldoc ??
> 
> Same as below.
> 
> > +struct madera_micbias_pin_pdata {
> > +	/** Regulator configuration for pin switch */
> 
> Just use Kerneldoc instead.
> 
> Same for all of these structs.
> 
> > +	struct regulator_init_data init_data;
> > +};
> > +
> > +/** Regulator configuration for an on-chip MICBIAS */
> > +struct madera_micbias_pdata {
> > +	/** Configuration of the MICBIAS generator */
> > +	struct regulator_init_data init_data;
> > +
> > +	bool ext_cap;    /** External capacitor fitted */
> > +
> > +	/**
> > +	 * Configuration for each output pin from this MICBIAS
> > +	 * (Not used on CS47L85 and WM1840)
> > +	 */
> > +	struct madera_micbias_pin_pdata pin[MADERA_MAX_CHILD_MICBIAS];
> > +};
> > +
> > +struct madera_pdata {
> > +	/** GPIO controlling /RESET, if any */
> > +	int reset;
> > +
> > +	/** Substruct of pdata for the LDO1 regulator */
> > +	struct madera_ldo1_pdata ldo1;
> > +
> > +	/** Substruct of pdata for the MICSUPP regulator */
> > +	struct madera_micsupp_pdata micsupp;
> > +
> > +	/** Substruct of pdata for the irqchip driver */
> > +	struct madera_irqchip_pdata irqchip;
> > +
> > +	/** Base GPIO */
> > +	int gpio_base;
> > +
> > +	/**
> > +	 * Array of GPIO configurations
> > +	 * See Documentation/pinctrl.txt
> > +	 */
> > +	const struct pinctrl_map *gpio_configs;
> > +	int n_gpio_configs;
> > +
> > +	/** MICBIAS configurations */
> > +	struct madera_micbias_pdata micbias[MADERA_MAX_MICBIAS];
> > +
> > +	/**
> > +	 * Substructure of pdata for the ASoC codec driver
> > +	 * See include/sound/madera-pdata.h
> > +	 */
> > +	struct madera_codec_pdata codec;
> > +
> > +	/**
> > +	 * General purpose switch mode setting
> > +	 * See the SW1_MODE field in the datasheet for the available values
> > +	 */
> > +	u32 gpsw[MADERA_MAX_GPSW];
> > +};
> > +
> > +#endif
>

Lee Jones April 24, 2017, 10:03 a.m. UTC | #3

On Wed, 19 Apr 2017, Richard Fitzgerald wrote:

> On Wed, 2017-04-12 at 13:54 +0100, Lee Jones wrote:
> > On Wed, 05 Apr 2017, Richard Fitzgerald wrote:
> > 
> > > This adds the generic core support for Cirrus Logic "Madera" class codecs.
> > > These are complex audio codec SoCs with a variety of digital and analogue
> > > I/O, onboard audio processing and DSPs, and other features.
> > > 
> > > These codecs are all based off a common set of hardware IP so can be
> > > supported by a core of common code (with a few minor device-to-device
> > > variations).
> > > 
> > > Signed-off-by: Charles Keepax <[e-mail]>
> > > Signed-off-by: Nikesh Oswal <[e-mail]>
> > > Signed-off-by: Richard Fitzgerald <[e-mail]>
> > > ---
> > >  Documentation/devicetree/bindings/mfd/madera.txt |  79 +++
> > >  MAINTAINERS                                      |   3 +
> > >  drivers/mfd/Kconfig                              |  23 +
> > >  drivers/mfd/Makefile                             |   4 +
> > >  drivers/mfd/madera-core.c                        | 689 +++++++++++++++++++++++
> > >  drivers/mfd/madera-i2c.c                         | 130 +++++
> > >  drivers/mfd/madera-spi.c                         | 131 +++++
> > >  drivers/mfd/madera.h                             |  52 ++
> > >  include/linux/mfd/madera/core.h                  | 175 ++++++
> > >  include/linux/mfd/madera/pdata.h                 |  88 +++
> > >  10 files changed, 1374 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt
> > >  create mode 100644 drivers/mfd/madera-core.c
> > >  create mode 100644 drivers/mfd/madera-i2c.c
> > >  create mode 100644 drivers/mfd/madera-spi.c
> > >  create mode 100644 drivers/mfd/madera.h
> > >  create mode 100644 include/linux/mfd/madera/core.h
> > >  create mode 100644 include/linux/mfd/madera/pdata.h
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
> > > new file mode 100644
> > > index 0000000..a6c3260
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/madera.txt
> > > @@ -0,0 +1,79 @@
> > > +Cirrus Logic Madera class audio codecs multi-function device
> > > +
> > > +These devices are audio SoCs with extensive digital capabilities and a range
> > > +of analogue I/O.
> > > +
> > > +See also the child driver bindings in:
> > > +bindings/extcon/extcon-madera.txt
> > > +bindings/gpio/gpio-madera.txt
> > > +bindings/interrupt-controller/cirrus,madera.txt
> > > +bindings/pinctrl/cirrus,madera-pinctrl.txt
> > > +bindings/regulator/madera-ldo1.txt
> > > +bindings/regulator/madera-micsupp.txt
> > > +bindings/sound/madera.txt
> > > +
> > > +Required properties:
> > > +
> > > +  - compatible : One of the following chip-specific strings:
> > > +        "cirrus,cs47l35"
> > > +        "cirrus,cs47l85"
> > > +        "cirrus,cs47l90"
> > > +        "cirrus,cs47l91"
> > > +        "cirrus,wm1840"
> > > +
> > > +  - reg : I2C slave address when connected using I2C, chip select number when
> > > +    using SPI.
> > > +
> > > +  - DCVDD-supply : Power supply for the device as defined in
> > > +    bindings/regulator/regulator.txt
> > > +    Mandatory on CS47L35, CS47L90, CS47L91
> > > +    Optional on CS47L85, WM1840
> > > +
> > > +  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
> > > +    Power supplies for the device
> > > +
> > > +  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
> > > +    (CS47L85, CS47L90, CS47L91, WM1840)
> > > +
> > > +  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
> > > +    (CS47L85, WM1840)
> > > +
> > > +  - SPKVDD-supply : Power supply for the device
> > > +    (CS47L35)
> > > +
> > > +Optional properties:
> > > +
> > > +  - MICVDD-supply : Power supply, only need to be specified if
> > > +    powered externally
> > > +
> > > +  - reset-gpios : One entry specifying the GPIO controlling /RESET.
> > > +    As defined in bindings/gpio.txt.
> > > +    Although optional, it is strongly recommended to use a hardware reset
> > > +
> > > +  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
> > > +    Documentation/devicetree/bindings/regulator/regulator.txt.
> > > +    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
> > > +    (all codecs)
> > > +
> > > +    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
> > > +    (all except CS47L85, WM1840)
> > > +
> > > +    The following following additional property is supported for the generator
> > > +    nodes:
> > > +      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
> > > +        capacitors attached.
> > > +
> > > +Example:
> > > +
> > > +codec: cs47l85@0 {
> > 
> > Node names should be generic.
> > 
> > You can swap these round if you want, so:
> > 
> > cs47l85: codec@0 {
> > 
> > ... is valid.
> > 
> > > +	compatible = "cirrus,cs47l85";
> > > +	reg = <0>;
> > > +
> > > +	reset-gpios = <&gpio 0>;
> > > +
> > > +	MICBIAS1 {
> > > +		regulator-min-microvolt = <900000>;
> > > +		regulator-max-microvolt = <3300000>;
> > > +		cirrus,ext-cap = <1>;
> > > +	};
> > > +};
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 02995c9..d28e53f 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -3266,7 +3266,10 @@ L:	[e-mail]
> > >  T:	git https://github.com/CirrusLogic/linux-drivers.git
> > >  W:	https://github.com/CirrusLogic/linux-drivers/wiki
> > >  S:	Supported
> > > +F:	Documentation/devicetree/bindings/mfd/madera.txt
> > >  F:	include/linux/mfd/madera/*
> > > +F:	drivers/mfd/madera*
> > > +F:	drivers/mfd/cs47l*
> > >  
> > >  CLEANCACHE API
> > >  M:	Konrad Rzeszutek Wilk <[e-mail]>
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index ce3a918..f0f9979 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -203,6 +203,29 @@ config MFD_CROS_EC_SPI
> > >  	  response time cannot be guaranteed, we support ignoring
> > >  	  'pre-amble' bytes before the response actually starts.
> > >  
> > > +config MFD_MADERA
> > > +	bool
> > > +	select REGMAP
> > > +	select MFD_CORE
> > > +
> > > +config MFD_MADERA_I2C
> > > +	tristate "Cirrus Logic Madera codecs with I2C"
> > > +	select MFD_MADERA
> > > +	select REGMAP_I2C
> > > +	depends on I2C
> > > +	help
> > > +	  Support for the Cirrus Logic Madera platform audio SoC
> > > +	  core functionality controlled via I2C.
> > > +
> > > +config MFD_MADERA_SPI
> > > +	tristate "Cirrus Logic Madera codecs with SPI"
> > > +	select MFD_MADERA
> > > +	select REGMAP_SPI
> > > +	depends on SPI_MASTER
> > > +	help
> > > +	  Support for the Cirrus Logic Madera platform audio SoC
> > > +	  core functionality controlled via SPI.
> > > +
> > >  config MFD_ASIC3
> > >  	bool "Compaq ASIC3"
> > >  	depends on GPIOLIB && ARM
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index fa86dbe..c41f6c9 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -72,6 +72,10 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
> > >  wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
> > >  obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
> > >  
> > > +obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
> > > +obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
> > > +obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
> > > +
> > >  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
> > >  obj-$(CONFIG_TPS65010)		+= tps65010.o
> > >  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> > > diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
> > > new file mode 100644
> > > index 0000000..ab5fe9b
> > > --- /dev/null
> > > +++ b/drivers/mfd/madera-core.c
> > > @@ -0,0 +1,689 @@
> > > +/*
> > > + * Core MFD support for Cirrus Logic Madera codecs
> > > + *
> > > + * Copyright 2015-2017 Cirrus Logic
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + */
> > > +
> > > +#include <linux/device.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/err.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/module.h>
> > > +#include <linux/notifier.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/of_gpio.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/pm_runtime.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/regulator/consumer.h>
> > > +#include <linux/regulator/machine.h>
> > > +#include <linux/regulator/of_regulator.h>
> > > +
> > > +#include <linux/mfd/madera/core.h>
> > > +#include <linux/mfd/madera/registers.h>
> > > +
> > > +#include "madera.h"
> > > +
> > > +#define CS47L35_SILICON_ID	0x6360
> > > +#define CS47L85_SILICON_ID	0x6338
> > > +#define CS47L90_SILICON_ID	0x6364
> > > +
> > > +#define MADERA_32KZ_MCLK2	1
> > > +
> > > +static const char * const madera_core_supplies[] = {
> > > +	"AVDD",
> > > +	"DBVDD1",
> > > +};
> > > +
> > > +static const struct mfd_cell madera_ldo1_devs[] = {
> > > +	{ .name = "madera-ldo1", .of_compatible = "cirrus,madera-ldo1" },
> > > +};
> > > +
> > > +static const struct mfd_cell cs47l35_devs[] = {
> > > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > > +	{ .name = "madera-irq", },
> > 
> > I believe this should be "interrupt-controller".
> > 
> 
> I don't think that's the case. I checked other irchip drivers and they
> have no particular standard naming. At least one is called
> "something-irq", none are called "something-interrupt-controller"
> 
> > irq is ambiguous.
> > 
> 
> I can't really see what other driver this could be confused with,
> especially as it's specified as madera-* so the alternative drivers are
> limited. Given the limited set of drivers I think it's clear enough it's
> the driver for the IRQ and a longer name doesn't add information.
> 
> > Same goes for the ones below.
> > 
> 
> Ditto. madera-micsupp will be replaced by the existing arizona-micsupp.
> Most gpio drivers are called "something-gpio". Extcon is the name of a
> driver subsystem so should be sufficiently clear. Likewise madera-codec.

I meant just the "-irq" entries.

... but I'm not 100% convinced that calling it "-irq" a terrible idea,
just that "irq-controller" or "interrupt-controller" would be better.

Either way, it's not a blocking point.

> > > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > > +	{ .name = "cs47l35-codec",  .of_compatible = "cirrus,cs47l35-codec" },
> > > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > > +};
> > > +
> > > +static const struct mfd_cell cs47l85_devs[] = {
> > > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > > +	{ .name = "madera-irq", },
> > > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > > +	{ .name = "cs47l85-codec",  .of_compatible = "cirrus,cs47l85-codec" },
> > > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > > +};
> > > +
> > > +static const struct mfd_cell cs47l90_devs[] = {
> > > +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> > > +	{ .name = "madera-irq", },
> > > +	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
> > > +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> > > +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
> > > +	{ .name = "cs47l90-codec",  .of_compatible = "cirrus,cs47l90-codec" },
> > > +	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
> > > +};
> > > +
> > > +const char *madera_name_from_type(enum madera_type type)
> > > +{
> > > +	switch (type) {
> > > +	case CS47L35:
> > > +		return "CS47L35";
> > > +	case CS47L85:
> > > +		return "CS47L85";
> > > +	case CS47L90:
> > > +		return "CS47L90";
> > > +	case CS47L91:
> > > +		return "CS47L91";
> > > +	case WM1840:
> > > +		return "WM1840";
> > > +	default:
> > > +		return "Unknown";
> > > +	}
> > > +}
> > > +EXPORT_SYMBOL_GPL(madera_name_from_type);
> > > +
> > > +#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
> > > +#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
> > > +
> > > +static int madera_wait_for_boot(struct madera *madera)
> > > +{
> > > +	unsigned int val;
> > > +	int ret;
> > > +
> > > +	/*
> > > +	 * We can't use an interrupt as we need to runtime resume to do so,
> > > +	 * so we poll the status bit. This won't race with the interrupt
> > > +	 * handler because it will be blocked on runtime resume.
> > > +	 */
> > > +	ret = regmap_read_poll_timeout(madera->regmap,
> > > +				       MADERA_IRQ1_RAW_STATUS_1,
> > > +				       val,
> > > +				       (val & MADERA_BOOT_DONE_STS1),
> > > +				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
> > > +				       MADERA_BOOT_POLL_TIMEOUT_US);
> > > +	/*
> > > +	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
> > > +	 * Do this unconditionally to avoid interrupt storms
> > > +	 */
> > > +	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
> > > +		     MADERA_BOOT_DONE_EINT1);
> > > +
> > > +	if (ret)
> > > +		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
> > 
> > Why isn't this under the call to regmap_read_poll_timeout()?
> > 
> 
> It was intended to make it clear that we must ack the BOOT_DONE now no
> matter what and to avoid the potential with them the other way around of
> someone adding more code in the if (or just a ret) and so accidentally
> failing to do the ack. I could swap them but I think I prefer keeping
> them this way and changing the comment to say this.

Okay.

I'm going to assume that we are in agreement for all points that you
did not answer (which is good).  I look forward to the next version.

Patch

diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
new file mode 100644
index 0000000..a6c3260
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/madera.txt
@@ -0,0 +1,79 @@ 
+Cirrus Logic Madera class audio codecs multi-function device
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+See also the child driver bindings in:
+bindings/extcon/extcon-madera.txt
+bindings/gpio/gpio-madera.txt
+bindings/interrupt-controller/cirrus,madera.txt
+bindings/pinctrl/cirrus,madera-pinctrl.txt
+bindings/regulator/madera-ldo1.txt
+bindings/regulator/madera-micsupp.txt
+bindings/sound/madera.txt
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l35"
+        "cirrus,cs47l85"
+        "cirrus,cs47l90"
+        "cirrus,cs47l91"
+        "cirrus,wm1840"
+
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - DCVDD-supply : Power supply for the device as defined in
+    bindings/regulator/regulator.txt
+    Mandatory on CS47L35, CS47L90, CS47L91
+    Optional on CS47L85, WM1840
+
+  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
+    Power supplies for the device
+
+  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
+    (CS47L85, CS47L90, CS47L91, WM1840)
+
+  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
+    (CS47L85, WM1840)
+
+  - SPKVDD-supply : Power supply for the device
+    (CS47L35)
+
+Optional properties:
+
+  - MICVDD-supply : Power supply, only need to be specified if
+    powered externally
+
+  - reset-gpios : One entry specifying the GPIO controlling /RESET.
+    As defined in bindings/gpio.txt.
+    Although optional, it is strongly recommended to use a hardware reset
+
+  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
+    (all codecs)
+
+    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
+    (all except CS47L85, WM1840)
+
+    The following following additional property is supported for the generator
+    nodes:
+      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
+        capacitors attached.
+
+Example:
+
+codec: cs47l85@0 {
+	compatible = "cirrus,cs47l85";
+	reg = <0>;
+
+	reset-gpios = <&gpio 0>;
+
+	MICBIAS1 {
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <3300000>;
+		cirrus,ext-cap = <1>;
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 02995c9..d28e53f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3266,7 +3266,10 @@  L:	[e-mail]
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
+F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	include/linux/mfd/madera/*
+F:	drivers/mfd/madera*
+F:	drivers/mfd/cs47l*
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <[e-mail]>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ce3a918..f0f9979 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -203,6 +203,29 @@  config MFD_CROS_EC_SPI
 	  response time cannot be guaranteed, we support ignoring
 	  'pre-amble' bytes before the response actually starts.
 
+config MFD_MADERA
+	bool
+	select REGMAP
+	select MFD_CORE
+
+config MFD_MADERA_I2C
+	tristate "Cirrus Logic Madera codecs with I2C"
+	select MFD_MADERA
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via I2C.
+
+config MFD_MADERA_SPI
+	tristate "Cirrus Logic Madera codecs with SPI"
+	select MFD_MADERA
+	select REGMAP_SPI
+	depends on SPI_MASTER
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via SPI.
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index fa86dbe..c41f6c9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -72,6 +72,10 @@  obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 
+obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
+obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
+obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
+
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
new file mode 100644
index 0000000..ab5fe9b
--- /dev/null
+++ b/drivers/mfd/madera-core.c
@@ -0,0 +1,689 @@ 
+/*
+ * Core MFD support for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/registers.h>
+
+#include "madera.h"
+
+#define CS47L35_SILICON_ID	0x6360
+#define CS47L85_SILICON_ID	0x6338
+#define CS47L90_SILICON_ID	0x6364
+
+#define MADERA_32KZ_MCLK2	1
+
+static const char * const madera_core_supplies[] = {
+	"AVDD",
+	"DBVDD1",
+};
+
+static const struct mfd_cell madera_ldo1_devs[] = {
+	{ .name = "madera-ldo1", .of_compatible = "cirrus,madera-ldo1" },
+};
+
+static const struct mfd_cell cs47l35_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{ .name = "cs47l35-codec",  .of_compatible = "cirrus,cs47l35-codec" },
+	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
+};
+
+static const struct mfd_cell cs47l85_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{ .name = "cs47l85-codec",  .of_compatible = "cirrus,cs47l85-codec" },
+	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
+};
+
+static const struct mfd_cell cs47l90_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp", .of_compatible = "cirrus,madera-micsupp" },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{ .name = "cs47l90-codec",  .of_compatible = "cirrus,cs47l90-codec" },
+	{ .name = "madera-haptics", .of_compatible = "cirrus,madera-haptics" },
+};
+
+const char *madera_name_from_type(enum madera_type type)
+{
+	switch (type) {
+	case CS47L35:
+		return "CS47L35";
+	case CS47L85:
+		return "CS47L85";
+	case CS47L90:
+		return "CS47L90";
+	case CS47L91:
+		return "CS47L91";
+	case WM1840:
+		return "WM1840";
+	default:
+		return "Unknown";
+	}
+}
+EXPORT_SYMBOL_GPL(madera_name_from_type);
+
+#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
+#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
+
+static int madera_wait_for_boot(struct madera *madera)
+{
+	unsigned int val;
+	int ret;
+
+	/*
+	 * We can't use an interrupt as we need to runtime resume to do so,
+	 * so we poll the status bit. This won't race with the interrupt
+	 * handler because it will be blocked on runtime resume.
+	 */
+	ret = regmap_read_poll_timeout(madera->regmap,
+				       MADERA_IRQ1_RAW_STATUS_1,
+				       val,
+				       (val & MADERA_BOOT_DONE_STS1),
+				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
+				       MADERA_BOOT_POLL_TIMEOUT_US);
+	/*
+	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
+	 * Do this unconditionally to avoid interrupt storms
+	 */
+	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
+		     MADERA_BOOT_DONE_EINT1);
+
+	if (ret)
+		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
+
+	pm_runtime_mark_last_busy(madera->dev);
+
+	return ret;
+}
+
+static int madera_soft_reset(struct madera *madera)
+{
+	int ret;
+
+	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
+	if (ret != 0) {
+		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
+		return ret;
+	}
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static void madera_enable_hard_reset(struct madera *madera)
+{
+	if (madera->reset_gpio)
+		gpiod_set_value_cansleep(madera->reset_gpio, 0);
+}
+
+static void madera_disable_hard_reset(struct madera *madera)
+{
+	if (madera->reset_gpio) {
+		gpiod_set_value_cansleep(madera->reset_gpio, 1);
+		usleep_range(1000, 2000);
+	}
+}
+
+#ifdef CONFIG_PM
+static int madera_runtime_resume(struct device *dev)
+{
+	struct madera *madera = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(madera->dev, "Leaving sleep mode\n");
+
+	ret = regulator_enable(madera->dcvdd);
+	if (ret) {
+		dev_err(madera->dev, "Failed to enable DCVDD: %d\n", ret);
+		return ret;
+	}
+
+	regcache_cache_only(madera->regmap, false);
+	regcache_cache_only(madera->regmap_32bit, false);
+
+	ret = madera_wait_for_boot(madera);
+	if (ret)
+		goto err;
+
+	ret = regcache_sync(madera->regmap);
+	if (ret) {
+		dev_err(madera->dev,
+			"Failed to restore 16-bit register cache\n");
+		goto err;
+	}
+
+	ret = regcache_sync(madera->regmap_32bit);
+	if (ret) {
+		dev_err(madera->dev,
+			"Failed to restore 32-bit register cache\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	regcache_cache_only(madera->regmap_32bit, true);
+	regcache_cache_only(madera->regmap, true);
+	regulator_disable(madera->dcvdd);
+
+	return ret;
+}
+
+static int madera_runtime_suspend(struct device *dev)
+{
+	struct madera *madera = dev_get_drvdata(dev);
+
+	dev_dbg(madera->dev, "Entering sleep mode\n");
+
+	regcache_cache_only(madera->regmap, true);
+	regcache_mark_dirty(madera->regmap);
+	regcache_cache_only(madera->regmap_32bit, true);
+	regcache_mark_dirty(madera->regmap_32bit);
+
+	regulator_disable(madera->dcvdd);
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops madera_pm_ops = {
+	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
+			   madera_runtime_resume,
+			   NULL)
+};
+EXPORT_SYMBOL_GPL(madera_pm_ops);
+
+unsigned int madera_get_num_micbias(struct madera *madera)
+{
+
+	switch (madera->type) {
+	case CS47L35:
+		return 2;
+	case CS47L85:
+	case WM1840:
+		return 4;
+	case CS47L90:
+	case CS47L91:
+		return 2;
+	default:
+		dev_warn(madera->dev, "No micbias known for codec %s\n",
+			 madera_name_from_type(madera->type));
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(madera_get_num_micbias);
+
+unsigned int madera_get_num_childbias(struct madera *madera,
+				      unsigned int micbias)
+{
+	/*
+	 * micbias argument reserved for future codecs that don't
+	 * have the same number of children on each micbias
+	 */
+
+	switch (madera->type) {
+	case CS47L35:
+		return 2;
+	case CS47L85:
+	case WM1840:
+		return 0;
+	case CS47L90:
+	case CS47L91:
+		return 4;
+	default:
+		dev_warn(madera->dev, "No child micbias known for codec %s\n",
+			 madera_name_from_type(madera->type));
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(madera_get_num_childbias);
+
+#ifdef CONFIG_OF
+const struct of_device_id madera_of_match[] = {
+	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
+	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
+	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
+	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
+	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
+	{},
+};
+EXPORT_SYMBOL_GPL(madera_of_match);
+
+unsigned long madera_of_get_type(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(madera_of_match, dev);
+
+	if (id)
+		return (unsigned long)id->data;
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(madera_of_get_type);
+#endif
+
+static int madera_prop_get_core_pdata(struct madera *madera)
+{
+	int ret;
+
+	madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
+						     "reset",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(madera->reset_gpio)) {
+		ret = PTR_ERR(madera->reset_gpio);
+
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		else if ((ret < 0) && (ret != -EINVAL))
+			dev_warn(madera->dev,
+				 "DT property reset-gpio is malformed: %d\n",
+				 ret);
+	}
+
+	return 0;
+}
+
+static void madera_configure_micbias(struct madera *madera)
+{
+	unsigned int num_micbias = madera_get_num_micbias(madera);
+	struct madera_micbias_pdata *pdata;
+	struct regulator_init_data *init_data;
+	unsigned int num_child_micbias;
+	unsigned int val, mask, reg;
+	int i, j, ret;
+
+	for (i = 0; i < num_micbias; i++) {
+		pdata = &madera->pdata.micbias[i];
+		init_data = &pdata->init_data;
+
+		if (!init_data->constraints.max_uV &&
+		    !init_data->constraints.valid_ops_mask)
+			continue;	/* pdata not set */
+
+		/* Apply default for bypass mode */
+		if (!init_data->constraints.max_uV)
+			init_data->constraints.max_uV = 2800;
+
+		val = (init_data->constraints.max_uV - 1500000) / 100000;
+		val <<= MADERA_MICB1_LVL_SHIFT;
+
+		mask = MADERA_MICB1_LVL_MASK | MADERA_MICB1_EXT_CAP |
+			MADERA_MICB1_BYPASS | MADERA_MICB1_RATE;
+
+		if (pdata->ext_cap)
+			val |= MADERA_MICB1_EXT_CAP;
+
+		/* if no child biases the discharge is set in the parent */
+		num_child_micbias = madera_get_num_childbias(madera, i + 1);
+		if (num_child_micbias == 0) {
+			mask |= MADERA_MICB1_DISCH;
+
+			switch (init_data->constraints.active_discharge) {
+			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
+				val |= MADERA_MICB1_DISCH;
+				break;
+			default:
+				break;
+			}
+		}
+
+		if (init_data->constraints.soft_start)
+			val |= MADERA_MICB1_RATE;
+
+		if (init_data->constraints.valid_ops_mask &
+		    REGULATOR_CHANGE_BYPASS)
+			val |= MADERA_MICB1_BYPASS;
+
+		reg = MADERA_MIC_BIAS_CTRL_1 + i;
+		ret = regmap_update_bits(madera->regmap, reg, mask, val);
+		if (ret)
+			dev_warn(madera->dev, "Failed to write 0x%x (%d)\n",
+				 reg, ret);
+
+		dev_dbg(madera->dev, "Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
+			i + 1, mask, val);
+
+		/* Configure the child micbias pins */
+		val = 0;
+		mask = 0;
+		for (j = 0; j < num_child_micbias; j++) {
+			mask |= (MADERA_MICB1A_DISCH << (j * 4));
+
+			init_data = &pdata->pin[j].init_data;
+			switch (init_data->constraints.active_discharge) {
+			case REGULATOR_ACTIVE_DISCHARGE_ENABLE:
+				val |= (MADERA_MICB1A_DISCH << (j * 4));
+				break;
+			default:
+				break;
+			}
+		}
+
+		if (mask) {
+			reg = MADERA_MIC_BIAS_CTRL_5 + (i * 2);
+			ret = regmap_update_bits(madera->regmap, reg, mask, val);
+			if (ret)
+				dev_warn(madera->dev,
+					 "Failed to write 0x%x (%d)\n",
+					 reg, ret);
+
+			dev_dbg(madera->dev,
+				"Set MICBIAS_CTRL_%d mask=0x%x val=0x%x\n",
+				i + 5, mask, val);
+		}
+	}
+}
+
+int madera_dev_init(struct madera *madera)
+{
+	struct device *dev = madera->dev;
+	const char *name;
+	unsigned int hwid;
+	int (*patch_fn)(struct madera *) = NULL;
+	const struct mfd_cell *mfd_devs;
+	int n_devs = 0;
+	int i, ret;
+
+	dev_set_drvdata(madera->dev, madera);
+	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
+
+	if (dev_get_platdata(madera->dev)) {
+		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
+		       sizeof(madera->pdata));
+
+		/* We use 0 in pdata to indicate a GPIO has not been set */
+		if (madera->pdata.reset > 0) {
+			/* Start out with /RESET asserted */
+			ret = devm_gpio_request_one(madera->dev,
+						madera->pdata.reset,
+						GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+						"madera reset");
+			if (ret) {
+				dev_err(dev, "Failed to request /RESET: %d\n",
+					ret);
+				return ret;
+			}
+
+			madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
+		}
+	} else {
+		ret = madera_prop_get_core_pdata(madera);
+		if (ret)
+			return ret;
+	}
+
+	if (!madera->reset_gpio)
+		dev_warn(madera->dev,
+			 "Running without reset GPIO is not recommended\n");
+
+	regcache_cache_only(madera->regmap, true);
+	regcache_cache_only(madera->regmap_32bit, true);
+
+	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
+		madera->core_supplies[i].supply = madera_core_supplies[i];
+
+	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
+
+	switch (madera->type) {
+	case CS47L35:
+	case CS47L90:
+	case CS47L91:
+		break;
+	case CS47L85:
+	case WM1840:
+		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
+				      madera_ldo1_devs,
+				      ARRAY_SIZE(madera_ldo1_devs),
+				      NULL, 0, NULL);
+		if (ret != 0) {
+			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
+			return ret;
+		}
+		break;
+	default:
+		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
+		return -ENODEV;
+	}
+
+	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
+				      madera->core_supplies);
+	if (ret) {
+		dev_err(dev, "Failed to request core supplies: %d\n", ret);
+		goto err_devs;
+	}
+
+	/*
+	 * Don't use devres here because the only device we have to get
+	 * against is the MFD device and DCVDD will likely be supplied by
+	 * one of its children. Meaning that the regulator will be
+	 * destroyed by the time devres calls regulator put.
+	 */
+	madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
+	if (IS_ERR(madera->dcvdd)) {
+		ret = PTR_ERR(madera->dcvdd);
+		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
+		goto err_devs;
+	}
+
+	ret = regulator_bulk_enable(madera->num_core_supplies,
+				    madera->core_supplies);
+	if (ret) {
+		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
+		goto err_dcvdd;
+	}
+
+	ret = regulator_enable(madera->dcvdd);
+	if (ret) {
+		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
+		goto err_enable;
+	}
+
+	madera_disable_hard_reset(madera);
+
+	regcache_cache_only(madera->regmap, false);
+	regcache_cache_only(madera->regmap_32bit, false);
+
+	/*
+	 * Verify that this is a chip we know about before we
+	 * starting doing any writes to its registers
+	 */
+	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
+	if (ret) {
+		dev_err(dev, "Failed to read ID register: %d\n", ret);
+		goto err_reset;
+	}
+
+	switch (hwid) {
+	case CS47L35_SILICON_ID:
+	case CS47L85_SILICON_ID:
+	case CS47L90_SILICON_ID:
+		break;
+	default:
+		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
+		ret = -EINVAL;
+		goto err_reset;
+	}
+
+	/* If we don't have a reset GPIO use a soft reset */
+	if (!madera->reset_gpio) {
+		ret = madera_soft_reset(madera);
+		if (ret)
+			goto err_reset;
+	}
+
+	ret = madera_wait_for_boot(madera);
+	if (ret) {
+		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
+		goto err_reset;
+	}
+
+	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
+			  &madera->rev);
+	if (ret) {
+		dev_err(dev, "Failed to read revision register: %d\n", ret);
+		goto err_reset;
+	}
+	madera->rev &= MADERA_HW_REVISION_MASK;
+
+	name = madera_name_from_type(madera->type);
+
+	switch (hwid) {
+	case CS47L35_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			switch (madera->type) {
+			case CS47L35:
+				patch_fn = cs47l35_patch;
+				mfd_devs = cs47l35_devs;
+				n_devs = ARRAY_SIZE(cs47l35_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	case CS47L85_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			switch (madera->type) {
+			case CS47L85:
+			case WM1840:
+				patch_fn = cs47l85_patch;
+				mfd_devs = cs47l85_devs;
+				n_devs = ARRAY_SIZE(cs47l85_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	case CS47L90_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			switch (madera->type) {
+			case CS47L90:
+			case CS47L91:
+				patch_fn = cs47l90_patch;
+				mfd_devs = cs47l90_devs;
+				n_devs = ARRAY_SIZE(cs47l90_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (!n_devs) {
+		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
+		ret = -ENODEV;
+		goto err_reset;
+	}
+
+	dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
+
+	/* Apply hardware patch */
+	if (patch_fn) {
+		ret = patch_fn(madera);
+		if (ret) {
+			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
+			goto err_reset;
+		}
+	}
+
+	/* Init 32k clock sourced from MCLK2 */
+	ret = regmap_update_bits(madera->regmap,
+			MADERA_CLOCK_32K_1,
+			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
+			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
+	if (ret) {
+		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
+		goto err_reset;
+	}
+
+	madera_configure_micbias(madera);
+
+	pm_runtime_set_active(madera->dev);
+	pm_runtime_enable(madera->dev);
+	pm_runtime_set_autosuspend_delay(madera->dev, 100);
+	pm_runtime_use_autosuspend(madera->dev);
+
+	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
+			      mfd_devs, n_devs,
+			      NULL, 0, NULL);
+	if (ret) {
+		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
+		goto err_pm_runtime;
+	}
+
+	return 0;
+
+err_pm_runtime:
+	pm_runtime_disable(madera->dev);
+err_reset:
+	madera_enable_hard_reset(madera);
+	regulator_disable(madera->dcvdd);
+err_enable:
+	regulator_bulk_disable(madera->num_core_supplies,
+			       madera->core_supplies);
+err_dcvdd:
+	regulator_put(madera->dcvdd);
+err_devs:
+	mfd_remove_devices(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(madera_dev_init);
+
+int madera_dev_exit(struct madera *madera)
+{
+	/* Prevent any IRQs being serviced while we clean up */
+	disable_irq(madera->irq);
+
+	/*
+	 * DCVDD could be supplied by a child node, we must disable it before
+	 * removing the children, and prevent PM runtime from turning it back on
+	 */
+	pm_runtime_disable(madera->dev);
+
+	regulator_disable(madera->dcvdd);
+	regulator_put(madera->dcvdd);
+
+	mfd_remove_devices(madera->dev);
+	madera_enable_hard_reset(madera);
+
+	regulator_bulk_disable(madera->num_core_supplies,
+			       madera->core_supplies);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(madera_dev_exit);
diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
new file mode 100644
index 0000000..8c90780
--- /dev/null
+++ b/drivers/mfd/madera-i2c.c
@@ -0,0 +1,130 @@ 
+/*
+ * I2C bus interface to Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#include <linux/mfd/madera/core.h>
+
+#include "madera.h"
+
+static int madera_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct madera *madera;
+	const struct regmap_config *regmap_16bit_config = NULL;
+	const struct regmap_config *regmap_32bit_config = NULL;
+	unsigned long type;
+	int ret;
+
+	if (i2c->dev.of_node)
+		type = madera_of_get_type(&i2c->dev);
+	else
+		type = id->driver_data;
+
+	switch (type) {
+	case CS47L35:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
+		}
+		break;
+	case CS47L85:
+	case WM1840:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
+		}
+		break;
+	case CS47L90:
+	case CS47L91:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
+		}
+		break;
+	default:
+		dev_err(&i2c->dev,
+			"Unknown Madera I2C device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_16bit_config) {
+		dev_err(&i2c->dev,
+			"Kernel does not include support for %s\n",
+			madera_name_from_type(type));
+		return -EINVAL;
+	}
+
+	madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
+	if (!madera)
+		return -ENOMEM;
+
+	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
+	if (IS_ERR(madera->regmap)) {
+		ret = PTR_ERR(madera->regmap);
+		dev_err(&i2c->dev,
+			"Failed to allocate 16-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
+	if (IS_ERR(madera->regmap_32bit)) {
+		ret = PTR_ERR(madera->regmap_32bit);
+		dev_err(&i2c->dev,
+			"Failed to allocate 32-bit register map: %d\n", ret);
+		return ret;
+	}
+
+	madera->type = type;
+	madera->dev = &i2c->dev;
+	madera->irq = i2c->irq;
+
+	return madera_dev_init(madera);
+}
+
+static int madera_i2c_remove(struct i2c_client *i2c)
+{
+	struct madera *madera = dev_get_drvdata(&i2c->dev);
+
+	madera_dev_exit(madera);
+	return 0;
+}
+
+static const struct i2c_device_id madera_i2c_id[] = {
+	{ "cs47l35", CS47L35 },
+	{ "cs47l85", CS47L85 },
+	{ "cs47l90", CS47L90 },
+	{ "cs47l91", CS47L91 },
+	{ "wm1840", WM1840 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
+
+static struct i2c_driver madera_i2c_driver = {
+	.driver = {
+		.name	= "madera",
+		.pm	= &madera_pm_ops,
+		.of_match_table	= of_match_ptr(madera_of_match),
+	},
+	.probe		= madera_i2c_probe,
+	.remove		= madera_i2c_remove,
+	.id_table	= madera_i2c_id,
+};
+
+module_i2c_driver(madera_i2c_driver);
+
+MODULE_DESCRIPTION("Madera I2C bus interface");
+MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
new file mode 100644
index 0000000..e7e13f0
--- /dev/null
+++ b/drivers/mfd/madera-spi.c
@@ -0,0 +1,131 @@ 
+/*
+ * SPI bus interface to Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mfd/madera/core.h>
+
+#include "madera.h"
+
+static int madera_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct madera *madera;
+	const struct regmap_config *regmap_16bit_config = NULL;
+	const struct regmap_config *regmap_32bit_config = NULL;
+	unsigned long type;
+	int ret;
+
+	if (spi->dev.of_node)
+		type = madera_of_get_type(&spi->dev);
+	else
+		type = id->driver_data;
+
+	switch (type) {
+	case CS47L35:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			regmap_16bit_config = &cs47l35_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l35_32bit_spi_regmap;
+		}
+		break;
+	case CS47L85:
+	case WM1840:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			regmap_16bit_config = &cs47l85_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l85_32bit_spi_regmap;
+		}
+		break;
+	case CS47L90:
+	case CS47L91:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			regmap_16bit_config = &cs47l90_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l90_32bit_spi_regmap;
+		}
+		break;
+	default:
+		dev_err(&spi->dev,
+			"Unknown Madera SPI device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_16bit_config) {
+		dev_err(&spi->dev,
+			"Kernel does not include support for %s\n",
+			madera_name_from_type(type));
+		return -EINVAL;
+	}
+
+	madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
+	if (!madera)
+		return -ENOMEM;
+
+	madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
+	if (IS_ERR(madera->regmap)) {
+		ret = PTR_ERR(madera->regmap);
+		dev_err(&spi->dev,
+			"Failed to allocate 16-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
+	if (IS_ERR(madera->regmap_32bit)) {
+		ret = PTR_ERR(madera->regmap_32bit);
+		dev_err(&spi->dev,
+			"Failed to allocate 32-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->type = type;
+	madera->dev = &spi->dev;
+	madera->irq = spi->irq;
+
+	return madera_dev_init(madera);
+}
+
+static int madera_spi_remove(struct spi_device *spi)
+{
+	struct madera *madera = spi_get_drvdata(spi);
+
+	madera_dev_exit(madera);
+	return 0;
+}
+
+static const struct spi_device_id madera_spi_ids[] = {
+	{ "cs47l35", CS47L35 },
+	{ "cs47l85", CS47L85 },
+	{ "cs47l90", CS47L90 },
+	{ "cs47l91", CS47L91 },
+	{ "wm1840", WM1840 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, madera_spi_ids);
+
+static struct spi_driver madera_spi_driver = {
+	.driver = {
+		.name	= "madera",
+		.owner	= THIS_MODULE,
+		.pm	= &madera_pm_ops,
+		.of_match_table	= of_match_ptr(madera_of_match),
+	},
+	.probe		= madera_spi_probe,
+	.remove		= madera_spi_remove,
+	.id_table	= madera_spi_ids,
+};
+
+module_spi_driver(madera_spi_driver);
+
+MODULE_DESCRIPTION("Madera SPI bus interface");
+MODULE_AUTHOR("Richard Fitzgerald <[e-mail]>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
new file mode 100644
index 0000000..57f6add
--- /dev/null
+++ b/drivers/mfd/madera.h
@@ -0,0 +1,52 @@ 
+/*
+ * madera.h  --  MFD internals for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2016 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_MFD_H
+#define MADERA_MFD_H
+
+#include <linux/pm.h>
+#include <linux/of.h>
+
+struct madera;
+
+extern const struct dev_pm_ops madera_pm_ops;
+extern const struct of_device_id madera_of_match[];
+
+int madera_dev_init(struct madera *madera);
+int madera_dev_exit(struct madera *madera);
+
+#ifdef CONFIG_OF
+unsigned long madera_of_get_type(struct device *dev);
+#else
+static inline unsigned long madera_of_get_type(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+extern const struct regmap_config cs47l35_16bit_spi_regmap;
+extern const struct regmap_config cs47l35_32bit_spi_regmap;
+extern const struct regmap_config cs47l35_16bit_i2c_regmap;
+extern const struct regmap_config cs47l35_32bit_i2c_regmap;
+int cs47l35_patch(struct madera *madera);
+
+extern const struct regmap_config cs47l85_16bit_spi_regmap;
+extern const struct regmap_config cs47l85_32bit_spi_regmap;
+extern const struct regmap_config cs47l85_16bit_i2c_regmap;
+extern const struct regmap_config cs47l85_32bit_i2c_regmap;
+int cs47l85_patch(struct madera *madera);
+
+extern const struct regmap_config cs47l90_16bit_spi_regmap;
+extern const struct regmap_config cs47l90_32bit_spi_regmap;
+extern const struct regmap_config cs47l90_16bit_i2c_regmap;
+extern const struct regmap_config cs47l90_32bit_i2c_regmap;
+int cs47l90_patch(struct madera *madera);
+
+#endif
diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
new file mode 100644
index 0000000..59b05f8
--- /dev/null
+++ b/include/linux/mfd/madera/core.h
@@ -0,0 +1,175 @@ 
+/*
+ * MFD internals for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_CORE_H
+#define MADERA_CORE_H
+
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/notifier.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/irqchip/irq-madera.h>
+#include <sound/madera-pdata.h>
+
+enum madera_type {
+	CS47L35 = 1,
+	CS47L85 = 2,
+	CS47L90 = 3,
+	CS47L91 = 4,
+	WM1840 = 7,
+};
+
+#define MADERA_MAX_CORE_SUPPLIES	2
+#define MADERA_MAX_GPIOS		40
+
+#define CS47L35_NUM_GPIOS		16
+#define CS47L85_NUM_GPIOS		40
+#define CS47L90_NUM_GPIOS		38
+
+
+/* Notifier events */
+#define MADERA_NOTIFY_VOICE_TRIGGER	0x1
+#define MADERA_NOTIFY_HPDET		0x2
+#define MADERA_NOTIFY_MICDET		0x4
+
+/* GPIO Function Definitions */
+#define MADERA_GP_FN_ALTERNATE		0x00
+#define MADERA_GP_FN_GPIO		0x01
+#define MADERA_GP_FN_DSP_GPIO		0x02
+#define MADERA_GP_FN_IRQ1		0x03
+#define MADERA_GP_FN_IRQ2		0x04
+#define MADERA_GP_FN_FLL1_CLOCK		0x10
+#define MADERA_GP_FN_FLL2_CLOCK		0x11
+#define MADERA_GP_FN_FLL3_CLOCK		0x12
+#define MADERA_GP_FN_FLLAO_CLOCK	0x13
+#define MADERA_GP_FN_FLL1_LOCK		0x18
+#define MADERA_GP_FN_FLL2_LOCK		0x19
+#define MADERA_GP_FN_FLL3_LOCK		0x1A
+#define MADERA_GP_FN_FLLAO_LOCK		0x1B
+#define MADERA_GP_FN_OPCLK_OUT		0x40
+#define MADERA_GP_FN_OPCLK_ASYNC_OUT	0x41
+#define MADERA_GP_FN_PWM1		0x48
+#define MADERA_GP_FN_PWM2		0x49
+#define MADERA_GP_FN_SPDIF_OUT		0x4C
+#define MADERA_GP_FN_HEADPHONE_DET	0x50
+#define MADERA_GP_FN_MIC_DET		0x58
+#define MADERA_GP_FN_DRC1_SIGNAL_DETECT	0x80
+#define MADERA_GP_FN_DRC2_SIGNAL_DETECT	0x81
+#define MADERA_GP_FN_ASRC1_IN1_LOCK	0x88
+#define MADERA_GP_FN_ASRC1_IN2_LOCK	0x89
+#define MADERA_GP_FN_ASRC2_IN1_LOCK	0x8A
+#define MADERA_GP_FN_ASRC2_IN2_LOCK	0x8B
+#define MADERA_GP_FN_DSP_IRQ1		0xA0
+#define MADERA_GP_FN_DSP_IRQ2		0xA1
+#define MADERA_GP_FN_DSP_IRQ3		0xA2
+#define MADERA_GP_FN_DSP_IRQ4		0xA3
+#define MADERA_GP_FN_DSP_IRQ5		0xA4
+#define MADERA_GP_FN_DSP_IRQ6		0xA5
+#define MADERA_GP_FN_DSP_IRQ7		0xA6
+#define MADERA_GP_FN_DSP_IRQ8		0xA7
+#define MADERA_GP_FN_DSP_IRQ9		0xA8
+#define MADERA_GP_FN_DSP_IRQ10		0xA9
+#define MADERA_GP_FN_DSP_IRQ11		0xAA
+#define MADERA_GP_FN_DSP_IRQ12		0xAB
+#define MADERA_GP_FN_DSP_IRQ13		0xAC
+#define MADERA_GP_FN_DSP_IRQ14		0xAD
+#define MADERA_GP_FN_DSP_IRQ15		0xAE
+#define MADERA_GP_FN_DSP_IRQ16		0xAF
+#define MADERA_GP_FN_HPOUT1L_SC		0xB0
+#define MADERA_GP_FN_HPOUT1R_SC		0xB1
+#define MADERA_GP_FN_HPOUT2L_SC		0xB2
+#define MADERA_GP_FN_HPOUT2R_SC		0xB3
+#define MADERA_GP_FN_HPOUT3L_SC		0xB4
+#define MADERA_GP_FN_HPOUT4R_SC		0xB5
+#define MADERA_GP_FN_SPKOUTL_SC		0xB6
+#define MADERA_GP_FN_SPKOUTR_SC		0xB7
+#define MADERA_GP_FN_HPOUT1L_ENA	0xC0
+#define MADERA_GP_FN_HPOUT1R_ENA	0xC1
+#define MADERA_GP_FN_HPOUT2L_ENA	0xC2
+#define MADERA_GP_FN_HPOUT2R_ENA	0xC3
+#define MADERA_GP_FN_HPOUT3L_ENA	0xC4
+#define MADERA_GP_FN_HPOUT4R_ENA	0xC5
+#define MADERA_GP_FN_SPKOUTL_ENA	0xC6
+#define MADERA_GP_FN_SPKOUTR_ENA	0xC7
+#define MADERA_GP_FN_HPOUT1L_DIS	0xD0
+#define MADERA_GP_FN_HPOUT1R_DIS	0xD1
+#define MADERA_GP_FN_HPOUT2L_DIS	0xD2
+#define MADERA_GP_FN_HPOUT2R_DIS	0xD3
+#define MADERA_GP_FN_HPOUT3L_DIS	0xD4
+#define MADERA_GP_FN_HPOUT4R_DIS	0xD5
+#define MADERA_GP_FN_SPKOUTL_DIS	0xD6
+#define MADERA_GP_FN_SPKOUTR_DIS	0xD7
+#define MADERA_GP_FN_SPK_SHUTDOWN	0xE0
+#define MADERA_GP_FN_SPK_OVH_SHUTDOWN	0xE1
+#define MADERA_GP_FN_SPK_OVH_WARN	0xE2
+#define MADERA_GP_FN_TIMER1_STATUS	0x140
+#define MADERA_GP_FN_TIMER2_STATUS	0x141
+#define MADERA_GP_FN_TIMER3_STATUS	0x142
+#define MADERA_GP_FN_TIMER4_STATUS	0x143
+#define MADERA_GP_FN_TIMER5_STATUS	0x144
+#define MADERA_GP_FN_TIMER6_STATUS	0x145
+#define MADERA_GP_FN_TIMER7_STATUS	0x146
+#define MADERA_GP_FN_TIMER8_STATUS	0x147
+#define MADERA_GP_FN_EVENTLOG1_FIFO_STS	0x150
+#define MADERA_GP_FN_EVENTLOG2_FIFO_STS	0x151
+#define MADERA_GP_FN_EVENTLOG3_FIFO_STS	0x152
+#define MADERA_GP_FN_EVENTLOG4_FIFO_STS	0x153
+#define MADERA_GP_FN_EVENTLOG5_FIFO_STS	0x154
+#define MADERA_GP_FN_EVENTLOG6_FIFO_STS	0x155
+#define MADERA_GP_FN_EVENTLOG7_FIFO_STS	0x156
+#define MADERA_GP_FN_EVENTLOG8_FIFO_STS	0x157
+
+struct snd_soc_dapm_context;
+
+struct madera {
+	struct regmap *regmap;
+	struct regmap *regmap_32bit;
+
+	struct device *dev;
+
+	enum madera_type type;
+	unsigned int rev;
+
+	struct gpio_desc *reset_gpio;
+
+	int num_core_supplies;
+	struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
+	struct regulator *dcvdd;
+	bool internal_dcvdd;
+
+	struct madera_pdata pdata;
+
+	struct device *irq_dev;
+	int irq;
+
+	unsigned int out_clamp[MADERA_MAX_OUTPUT];
+	unsigned int out_shorted[MADERA_MAX_OUTPUT];
+	unsigned int hp_ena;
+
+	struct snd_soc_dapm_context *dapm;
+
+	struct blocking_notifier_head notifier;
+};
+
+unsigned int madera_get_num_micbias(struct madera *madera);
+unsigned int madera_get_num_childbias(struct madera *madera,
+				      unsigned int micbias);
+
+const char *madera_name_from_type(enum madera_type type);
+
+static inline int madera_call_notifiers(struct madera *madera,
+					unsigned long event,
+					void *data)
+{
+	return blocking_notifier_call_chain(&madera->notifier, event, data);
+}
+#endif
diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
new file mode 100644
index 0000000..6d930aa
--- /dev/null
+++ b/include/linux/mfd/madera/pdata.h
@@ -0,0 +1,88 @@ 
+/*
+ * Platform data for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_PDATA_H
+#define MADERA_PDATA_H
+
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/regulator/madera-ldo1.h>
+#include <linux/regulator/madera-micsupp.h>
+#include <linux/irqchip/irq-madera-pdata.h>
+#include <sound/madera-pdata.h>
+
+#define MADERA_MAX_MICBIAS		4
+#define MADERA_MAX_CHILD_MICBIAS	4
+
+#define MADERA_MAX_GPSW			2
+
+struct pinctrl_map;
+
+/** MICBIAS pin configuration */
+struct madera_micbias_pin_pdata {
+	/** Regulator configuration for pin switch */
+	struct regulator_init_data init_data;
+};
+
+/** Regulator configuration for an on-chip MICBIAS */
+struct madera_micbias_pdata {
+	/** Configuration of the MICBIAS generator */
+	struct regulator_init_data init_data;
+
+	bool ext_cap;    /** External capacitor fitted */
+
+	/**
+	 * Configuration for each output pin from this MICBIAS
+	 * (Not used on CS47L85 and WM1840)
+	 */
+	struct madera_micbias_pin_pdata pin[MADERA_MAX_CHILD_MICBIAS];
+};
+
+struct madera_pdata {
+	/** GPIO controlling /RESET, if any */
+	int reset;
+
+	/** Substruct of pdata for the LDO1 regulator */
+	struct madera_ldo1_pdata ldo1;
+
+	/** Substruct of pdata for the MICSUPP regulator */
+	struct madera_micsupp_pdata micsupp;
+
+	/** Substruct of pdata for the irqchip driver */
+	struct madera_irqchip_pdata irqchip;
+
+	/** Base GPIO */
+	int gpio_base;
+
+	/**
+	 * Array of GPIO configurations
+	 * See Documentation/pinctrl.txt
+	 */
+	const struct pinctrl_map *gpio_configs;
+	int n_gpio_configs;
+
+	/** MICBIAS configurations */
+	struct madera_micbias_pdata micbias[MADERA_MAX_MICBIAS];
+
+	/**
+	 * Substructure of pdata for the ASoC codec driver
+	 * See include/sound/madera-pdata.h
+	 */
+	struct madera_codec_pdata codec;
+
+	/**
+	 * General purpose switch mode setting
+	 * See the SW1_MODE field in the datasheet for the available values
+	 */
+	u32 gpsw[MADERA_MAX_GPSW];
+};
+
+#endif