diff mbox

[v2,3/3] arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board

Message ID 1492408934-22096-4-git-send-email-hoegeun.kwon@samsung.com (mailing list archive)
State Superseded
Headers show

Commit Message

Hoegeun Kwon April 17, 2017, 6:02 a.m. UTC
This patch add the panel device tree node for s6e3hf2 display
controller to TM2e dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Andrzej Hajda April 18, 2017, 6 a.m. UTC | #1
On 17.04.2017 08:02, Hoegeun Kwon wrote:
> This patch add the panel device tree node for s6e3hf2 display
> controller to TM2e dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

Maybe it would be good to remove te-gpios property - tm2/tm2e uses
hardware trigger, so it is not necessary and generates useless interrupts.

Beside this:
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
 --
Regards
Andrzej
> ---
>  arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 694717a..98ad094 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -52,6 +52,18 @@
>  	assigned-clock-rates = <278000000>, <400000000>;
>  };
>  
> +&dsi {
> +	panel@0 {
> +		compatible = "samsung,s6e3hf2";
> +		reg = <0>;
> +		vdd3-supply = <&ldo27_reg>;
> +		vci-supply = <&ldo28_reg>;
> +		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> +		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> +		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
>  &ldo31_reg {
>  	regulator-name = "TSP_VDD_1.8V_AP";
>  	regulator-min-microvolt = <1800000>;


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hoegeun Kwon April 18, 2017, 7:44 a.m. UTC | #2
On 04/18/2017 03:00 PM, Andrzej Hajda wrote:
> On 17.04.2017 08:02, Hoegeun Kwon wrote:
>> This patch add the panel device tree node for s6e3hf2 display
>> controller to TM2e dts.
>>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> Maybe it would be good to remove te-gpios property - tm2/tm2e uses
> hardware trigger, so it is not necessary and generates useless interrupts.

Thanks for your review.

I agree, but I thinks remove the te-gpio property after your patch [1] 
has been merged.


[1] https://patchwork.kernel.org/patch/9625383/

Best regards,
Hoegeun

>
> Beside this:
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>   --
> Regards
> Andrzej
>> ---
>>   arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> index 694717a..98ad094 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> @@ -52,6 +52,18 @@
>>   	assigned-clock-rates = <278000000>, <400000000>;
>>   };
>>   
>> +&dsi {
>> +	panel@0 {
>> +		compatible = "samsung,s6e3hf2";
>> +		reg = <0>;
>> +		vdd3-supply = <&ldo27_reg>;
>> +		vci-supply = <&ldo28_reg>;
>> +		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>> +		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> +		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
>> +	};
>> +};
>> +
>>   &ldo31_reg {
>>   	regulator-name = "TSP_VDD_1.8V_AP";
>>   	regulator-min-microvolt = <1800000>;
>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrzej Hajda April 18, 2017, 7:56 a.m. UTC | #3
On 18.04.2017 09:44, Hoegeun Kwon wrote:
> On 04/18/2017 03:00 PM, Andrzej Hajda wrote:
>> On 17.04.2017 08:02, Hoegeun Kwon wrote:
>>> This patch add the panel device tree node for s6e3hf2 display
>>> controller to TM2e dts.
>>>
>>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
>> Maybe it would be good to remove te-gpios property - tm2/tm2e uses
>> hardware trigger, so it is not necessary and generates useless interrupts.
> Thanks for your review.
>
> I agree, but I thinks remove the te-gpio property after your patch [1] 
> has been merged.

Patch [1] has been merged about month ago :)

Regards
Andrzej

>
>
> [1] https://patchwork.kernel.org/patch/9625383/
>
> Best regards,
> Hoegeun
>
>> Beside this:
>> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>>   --
>> Regards
>> Andrzej
>>> ---
>>>   arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
>>>   1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>>> index 694717a..98ad094 100644
>>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>>> @@ -52,6 +52,18 @@
>>>   	assigned-clock-rates = <278000000>, <400000000>;
>>>   };
>>>   
>>> +&dsi {
>>> +	panel@0 {
>>> +		compatible = "samsung,s6e3hf2";
>>> +		reg = <0>;
>>> +		vdd3-supply = <&ldo27_reg>;
>>> +		vci-supply = <&ldo28_reg>;
>>> +		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>>> +		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>>> +		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
>>> +	};
>>> +};
>>> +
>>>   &ldo31_reg {
>>>   	regulator-name = "TSP_VDD_1.8V_AP";
>>>   	regulator-min-microvolt = <1800000>;
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hoegeun Kwon April 18, 2017, 8:27 a.m. UTC | #4
On 04/18/2017 04:56 PM, Andrzej Hajda wrote:
> On 18.04.2017 09:44, Hoegeun Kwon wrote:
>> On 04/18/2017 03:00 PM, Andrzej Hajda wrote:
>>> On 17.04.2017 08:02, Hoegeun Kwon wrote:
>>>> This patch add the panel device tree node for s6e3hf2 display
>>>> controller to TM2e dts.
>>>>
>>>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
>>> Maybe it would be good to remove te-gpios property - tm2/tm2e uses
>>> hardware trigger, so it is not necessary and generates useless interrupts.
>> Thanks for your review.
>>
>> I agree, but I thinks remove the te-gpio property after your patch [1]
>> has been merged.
> Patch [1] has been merged about month ago :)

Ah..., My mistake.... :)

I will send ver3 patchset without te-gpio property.

Best regards,
Hoegeun


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 694717a..98ad094 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -52,6 +52,18 @@ 
 	assigned-clock-rates = <278000000>, <400000000>;
 };
 
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3hf2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &ldo31_reg {
 	regulator-name = "TSP_VDD_1.8V_AP";
 	regulator-min-microvolt = <1800000>;