| Message ID | 1493153351-12698-3-git-send-email-jon.mason@broadcom.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On Tue, Apr 25, 2017 at 04:49:11PM -0400, Jon Mason wrote: > Add thermal support via the ns-thermal driver and create a single > thermal zone for the entire SoC. > > Signed-off-by: Jon Mason <jon.mason@broadcom.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> > --- > arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi > index 832795b..be6fcfb 100644 > --- a/arch/arm/boot/dts/bcm-nsp.dtsi > +++ b/arch/arm/boot/dts/bcm-nsp.dtsi > @@ -383,6 +383,12 @@ > <0x3f408 0x04>; > }; > > + thermal: thermal@3f2c0 { > + compatible = "brcm,ns-thermal"; > + reg = <0x3f2c0 0x10>; > + #thermal-sensor-cells = <0>; > + }; > + > sata_phy: sata_phy@40100 { > compatible = "brcm,iproc-nsp-sata-phy"; > reg = <0x40100 0x340>; > @@ -533,4 +539,24 @@ > brcm,pcie-msi-inten; > }; > }; > + > + thermal-zones { > + cpu-thermal { > + polling-delay-passive = <0>; > + polling-delay = <1000>; > + coefficients = <(-556) 418000>; > + thermal-sensors = <&thermal>; > + > + trips { > + cpu-crit { > + temperature = <125000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + }; > + }; > + }; > }; > -- > 2.7.4 >
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 832795b..be6fcfb 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -383,6 +383,12 @@ <0x3f408 0x04>; }; + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + sata_phy: sata_phy@40100 { compatible = "brcm,iproc-nsp-sata-phy"; reg = <0x40100 0x340>; @@ -533,4 +539,24 @@ brcm,pcie-msi-inten; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; };
Add thermal support via the ns-thermal driver and create a single thermal zone for the entire SoC. Signed-off-by: Jon Mason <jon.mason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)