| Message ID | c7ac6faa0568e6418291255af537c4b070bdea63.1493812478.git-series.maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Wed, May 3, 2017 at 7:59 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The A10s Olinuxino has an HDMI connector. Make sure we can use it. > > Acked-by: Chen-Yu Tsai <wens@csie.org> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 +++++++++++++++++- > 1 file changed, 29 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > index 894f874a5beb..1d13b6407222 100644 > --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > @@ -63,6 +63,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; Just curious, should we take this into consideration when creating drm_connector? ChenYu > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > pinctrl-names = "default"; > @@ -76,6 +87,10 @@ > }; > }; > > +&be0 { > + status = "okay"; > +}; > + > &ehci0 { > status = "okay"; > }; > @@ -91,6 +106,16 @@ > status = "okay"; > }; > > +&hdmi { > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &i2c0 { > pinctrl-names = "default"; > pinctrl-0 = <&i2c0_pins_a>; > @@ -248,6 +273,10 @@ > status = "okay"; > }; > > +&tcon0 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; > -- > git-series 0.8.11 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Thu, May 04, 2017 at 04:05:18PM +0800, Chen-Yu Tsai wrote: > On Wed, May 3, 2017 at 7:59 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > The A10s Olinuxino has an HDMI connector. Make sure we can use it. > > > > Acked-by: Chen-Yu Tsai <wens@csie.org> > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > --- > > arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 +++++++++++++++++- > > 1 file changed, 29 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > > index 894f874a5beb..1d13b6407222 100644 > > --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > > +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts > > @@ -63,6 +63,17 @@ > > stdout-path = "serial0:115200n8"; > > }; > > > > + connector { > > + compatible = "hdmi-connector"; > > + type = "a"; > > Just curious, should we take this into consideration when creating > drm_connector? I'm not sure, no other driver does so. And I haven't seen any of our boards with a HDMI-B, C or mini-HDMI connector. Maxime
在 2017-05-11 03:23，Maxime Ripard 写道： > Hi, > > On Thu, May 04, 2017 at 04:05:18PM +0800, Chen-Yu Tsai wrote: >> On Wed, May 3, 2017 at 7:59 PM, Maxime Ripard >> <maxime.ripard@free-electrons.com> wrote: >> > The A10s Olinuxino has an HDMI connector. Make sure we can use it. >> > >> > Acked-by: Chen-Yu Tsai <wens@csie.org> >> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> >> > --- >> > arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 +++++++++++++++++- >> > 1 file changed, 29 insertions(+), 0 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts >> > index 894f874a5beb..1d13b6407222 100644 >> > --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts >> > +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts >> > @@ -63,6 +63,17 @@ >> > stdout-path = "serial0:115200n8"; >> > }; >> > >> > + connector { >> > + compatible = "hdmi-connector"; >> > + type = "a"; >> >> Just curious, should we take this into consideration when creating >> drm_connector? > > I'm not sure, no other driver does so. And I haven't seen any of our > boards with a HDMI-B, C or mini-HDMI connector. Tablets usually come with micro-HDMI connector. > > Maxime > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 894f874a5beb..1d13b6407222 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -63,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -76,6 +87,10 @@ }; }; +&be0 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -91,6 +106,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -248,6 +273,10 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;