@@ -130,6 +130,7 @@ int intel_plane_atomic_check_with_state(struct intel_crtc_state *crtc_state,
struct drm_i915_private *dev_priv = to_i915(plane->dev);
struct drm_plane_state *state = &intel_state->base;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ unsigned int rotation = intel_plane_get_rotation(intel_state);
int ret;
/*
@@ -149,7 +150,7 @@ int intel_plane_atomic_check_with_state(struct intel_crtc_state *crtc_state,
intel_state->clip.y2 =
crtc_state->base.enable ? crtc_state->pipe_src_h : 0;
- if (state->fb && drm_rotation_90_or_270(state->rotation)) {
+ if (state->fb && drm_rotation_90_or_270(rotation)) {
struct drm_format_name_buf format_name;
if (state->fb->modifier != I915_FORMAT_MOD_Y_TILED &&
@@ -178,8 +179,8 @@ int intel_plane_atomic_check_with_state(struct intel_crtc_state *crtc_state,
/* CHV ignores the mirror bit when the rotate bit is set :( */
if (IS_CHERRYVIEW(dev_priv) &&
- state->rotation & DRM_ROTATE_180 &&
- state->rotation & DRM_REFLECT_X) {
+ rotation & DRM_ROTATE_180 &&
+ rotation & DRM_REFLECT_X) {
DRM_DEBUG_KMS("Cannot rotate and reflect at the same time\n");
return -EINVAL;
}
@@ -2286,7 +2286,7 @@ void intel_add_fb_offsets(int *x, int *y,
{
const struct intel_framebuffer *intel_fb = to_intel_framebuffer(state->base.fb);
- unsigned int rotation = state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(state);
if (drm_rotation_90_or_270(rotation)) {
*x += intel_fb->rotated[plane].x;
@@ -2339,7 +2339,7 @@ static u32 intel_adjust_tile_offset(int *x, int *y,
const struct drm_i915_private *dev_priv = to_i915(state->base.plane->dev);
const struct drm_framebuffer *fb = state->base.fb;
unsigned int cpp = fb->format->cpp[plane];
- unsigned int rotation = state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(state);
unsigned int pitch = intel_fb_pitch(fb, plane, rotation);
WARN_ON(new_offset > old_offset);
@@ -2444,7 +2444,7 @@ u32 intel_compute_tile_offset(int *x, int *y,
{
const struct drm_i915_private *dev_priv = to_i915(state->base.plane->dev);
const struct drm_framebuffer *fb = state->base.fb;
- unsigned int rotation = state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(state);
int pitch = intel_fb_pitch(fb, plane, rotation);
u32 alignment;
@@ -2798,9 +2798,10 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
return;
valid_fb:
+ intel_crtc->initial_rotation = plane_config->rotation;
mutex_lock(&dev->struct_mutex);
intel_state->vma =
- intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
+ intel_pin_and_fence_fb_obj(fb, intel_crtc->initial_rotation);
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(intel_state->vma)) {
DRM_ERROR("failed to pin boot fb on pipe %d: %li\n",
@@ -2882,7 +2883,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
{
const struct drm_i915_private *dev_priv = to_i915(plane_state->base.plane->dev);
const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
int x = plane_state->base.src.x1 >> 16;
int y = plane_state->base.src.y1 >> 16;
int w = drm_rect_width(&plane_state->base.src) >> 16;
@@ -2941,7 +2942,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
int max_width = skl_max_plane_width(fb, 1, rotation);
int max_height = 4096;
int x = plane_state->base.src.x1 >> 17;
@@ -2970,7 +2971,7 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
int skl_check_plane_surface(struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
int ret;
if (!plane_state->base.visible)
@@ -3014,7 +3015,7 @@ static void i9xx_update_primary_plane(struct drm_plane *primary,
u32 linear_offset;
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
int x = plane_state->base.src.x1 >> 16;
int y = plane_state->base.src.y1 >> 16;
@@ -3146,7 +3147,7 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
u32 linear_offset;
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
int x = plane_state->base.src.x1 >> 16;
int y = plane_state->base.src.y1 >> 16;
@@ -3373,7 +3374,7 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
enum plane_id plane_id = to_intel_plane(plane)->id;
enum pipe pipe = to_intel_plane(plane)->pipe;
u32 plane_ctl;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
u32 stride = skl_plane_stride(fb, 0, rotation);
u32 surf_addr = plane_state->main.offset;
int scaler_id = plane_state->scaler_id;
@@ -4735,7 +4736,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
ret = skl_update_scaler(crtc_state, force_detach,
drm_plane_index(&intel_plane->base),
&plane_state->scaler_id,
- plane_state->base.rotation,
+ intel_plane_get_rotation(plane_state),
drm_rect_width(&plane_state->base.src) >> 16,
drm_rect_height(&plane_state->base.src) >> 16,
drm_rect_width(&plane_state->base.dst),
@@ -8733,6 +8734,9 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
plane_config->tiling = I915_TILING_X;
fb->modifier = I915_FORMAT_MOD_X_TILED;
}
+
+ if (val & DISPPLANE_ROTATE_180)
+ plane_config->rotation = DRM_ROTATE_180;
}
pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
@@ -9784,6 +9788,9 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
goto error;
}
+ if ((val & PLANE_CTL_ROTATE_MASK) == PLANE_CTL_ROTATE_180)
+ plane_config->rotation = DRM_ROTATE_180;
+
base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
plane_config->base = base;
@@ -9872,6 +9879,9 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc,
plane_config->tiling = I915_TILING_X;
fb->modifier = I915_FORMAT_MOD_X_TILED;
}
+
+ if (val & DISPPLANE_ROTATE_180)
+ plane_config->rotation = DRM_ROTATE_180;
}
pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
@@ -10857,7 +10867,7 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
if (HAS_DDI(dev_priv))
cntl |= CURSOR_PIPE_CSC_ENABLE;
- if (plane_state->base.rotation & DRM_ROTATE_180)
+ if (intel_plane_get_rotation(plane_state) & DRM_ROTATE_180)
cntl |= CURSOR_ROTATE_180;
}
@@ -10874,6 +10884,25 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
intel_crtc->cursor_base = base;
}
+static void intel_crtc_get_cursor_pos(struct drm_crtc *crtc,
+ const struct drm_plane_state *cursor,
+ int *x, int *y)
+{
+ struct drm_plane_state *primary = crtc->primary->state;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ *x = cursor->crtc_x;
+ *y = cursor->crtc_y;
+
+ if (!primary)
+ return;
+
+ if (intel_crtc->initial_rotation == DRM_ROTATE_180) {
+ *x = primary->crtc_w - cursor->crtc_w - *x;
+ *y = primary->crtc_h - cursor->crtc_h - *y;
+ }
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
const struct intel_plane_state *plane_state)
@@ -10881,13 +10910,12 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ int x, y, pipe = intel_crtc->pipe;
u32 base = intel_crtc->cursor_addr;
u32 pos = 0;
if (plane_state) {
- int x = plane_state->base.crtc_x;
- int y = plane_state->base.crtc_y;
+ intel_crtc_get_cursor_pos(crtc, &plane_state->base, &x, &y);
if (x < 0) {
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
@@ -10903,7 +10931,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
/* ILK+ do this automagically */
if (HAS_GMCH_DISPLAY(dev_priv) &&
- plane_state->base.rotation & DRM_ROTATE_180) {
+ intel_plane_get_rotation(plane_state) & DRM_ROTATE_180) {
base += (plane_state->base.crtc_h *
plane_state->base.crtc_w - 1) * 4;
}
@@ -12152,6 +12180,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
enum pipe pipe = intel_crtc->pipe;
struct intel_flip_work *work;
struct intel_engine_cs *engine;
+ unsigned int rotation;
bool mmio_flip;
struct drm_i915_gem_request *request;
struct i915_vma *vma;
@@ -12258,7 +12287,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
mmio_flip = use_mmio_flip(engine, obj);
- vma = intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
+ rotation = intel_plane_get_rotation(intel_state);
+ vma = intel_pin_and_fence_fb_obj(fb, rotation);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto cleanup_pending;
@@ -12268,7 +12298,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
intel_state->vma = vma;
work->gtt_offset = i915_ggtt_offset(vma) + intel_crtc->dspaddr_offset;
- work->rotation = crtc->primary->state->rotation;
+ work->rotation = rotation;
/*
* There's the potential that the next frame will not be compatible with
@@ -14842,9 +14872,12 @@ intel_prepare_plane_fb(struct drm_plane *plane,
return ret;
}
} else {
+ unsigned int rotation;
struct i915_vma *vma;
- vma = intel_pin_and_fence_fb_obj(fb, new_state->rotation);
+ rotation = intel_plane_get_rotation(
+ to_intel_plane_state(new_state));
+ vma = intel_pin_and_fence_fb_obj(fb, rotation);
if (IS_ERR(vma)) {
DRM_DEBUG_KMS("failed to pin object\n");
return PTR_ERR(vma);
@@ -15091,9 +15124,12 @@ intel_legacy_cursor_update(struct drm_plane *plane,
goto out_unlock;
}
} else {
+ unsigned int rotation;
struct i915_vma *vma;
- vma = intel_pin_and_fence_fb_obj(fb, new_plane_state->rotation);
+ rotation = intel_plane_get_rotation(
+ to_intel_plane_state(new_plane_state));
+ vma = intel_pin_and_fence_fb_obj(fb, rotation);
if (IS_ERR(vma)) {
DRM_DEBUG_KMS("failed to pin object\n");
@@ -16714,7 +16750,9 @@ int intel_modeset_init(struct drm_device *dev)
drm_modeset_unlock_all(dev);
for_each_intel_crtc(dev, crtc) {
- struct intel_initial_plane_config plane_config = {};
+ struct intel_initial_plane_config plane_config = {
+ .rotation = DRM_ROTATE_0
+ };
if (!crtc->active)
continue;
@@ -418,6 +418,7 @@ struct intel_initial_plane_config {
unsigned int tiling;
int size;
u32 base;
+ uint8_t rotation; /* DRM_ROTATE_* */
};
#define SKL_MIN_SRC_W 8
@@ -704,6 +705,12 @@ struct intel_crtc {
atomic_t unpin_work_count;
+ /*
+ * Initial DRM_ROTATE_* as read back from the hardware at init, this
+ * is used to compensate for e.g. upside-down mounted lcd-panels.
+ */
+ uint8_t initial_rotation;
+
/* Display surface base address adjustement for pageflips. Note that on
* gen4+ this only adjusts up to a tile, offsets within a tile are
* handled in the hw itself (with the TILEOFF register). */
@@ -1403,6 +1410,31 @@ static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
return i915_ggtt_offset(state->vma);
}
+static inline unsigned int
+intel_plane_get_rotation(const struct intel_plane_state *plane_state)
+{
+ unsigned int rotation = plane_state->base.rotation;
+ unsigned int new_rotation = DRM_ROTATE_0;
+ struct intel_crtc *intel_crtc;
+
+ if (!plane_state->base.crtc)
+ return rotation;
+
+ /* We only support an initial rotation of DRM_ROTATE_180 for now */
+ intel_crtc = to_intel_crtc(plane_state->base.crtc);
+ if (intel_crtc->initial_rotation != DRM_ROTATE_180)
+ return rotation;
+
+ switch (rotation & DRM_ROTATE_MASK) {
+ case DRM_ROTATE_0: new_rotation = DRM_ROTATE_180; break;
+ case DRM_ROTATE_90: new_rotation = DRM_ROTATE_270; break;
+ case DRM_ROTATE_180: new_rotation = DRM_ROTATE_0; break;
+ case DRM_ROTATE_270: new_rotation = DRM_ROTATE_90; break;
+ }
+
+ return (rotation & DRM_ROTATE_MASK) | new_rotation;
+}
+
u32 skl_plane_ctl_format(uint32_t pixel_format);
u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
u32 skl_plane_ctl_rotation(unsigned int rotation);
@@ -746,7 +746,7 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc,
cache->crtc.hsw_bdw_pixel_rate =
ilk_pipe_pixel_rate(crtc_state);
- cache->plane.rotation = plane_state->base.rotation;
+ cache->plane.rotation = intel_plane_get_rotation(plane_state);
cache->plane.src_w = drm_rect_width(&plane_state->base.src) >> 16;
cache->plane.src_h = drm_rect_height(&plane_state->base.src) >> 16;
cache->plane.visible = plane_state->base.visible;
@@ -3186,6 +3186,7 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
static uint32_t
skl_plane_downscale_amount(const struct intel_plane_state *pstate)
{
+ unsigned int rotation = intel_plane_get_rotation(pstate);
uint32_t downscale_h, downscale_w;
uint32_t src_w, src_h, dst_w, dst_h;
@@ -3197,7 +3198,7 @@ skl_plane_downscale_amount(const struct intel_plane_state *pstate)
src_h = drm_rect_height(&pstate->base.src);
dst_w = drm_rect_width(&pstate->base.dst);
dst_h = drm_rect_height(&pstate->base.dst);
- if (drm_rotation_90_or_270(pstate->base.rotation))
+ if (drm_rotation_90_or_270(rotation))
swap(dst_w, dst_h);
downscale_h = max(src_h / dst_h, (uint32_t)DRM_PLANE_HELPER_NO_SCALING);
@@ -3213,6 +3214,7 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
int y)
{
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
+ unsigned int rotation = intel_plane_get_rotation(intel_pstate);
uint32_t down_scale_amount, data_rate;
uint32_t width = 0, height = 0;
struct drm_framebuffer *fb;
@@ -3232,7 +3234,7 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
width = drm_rect_width(&intel_pstate->base.src) >> 16;
height = drm_rect_height(&intel_pstate->base.src) >> 16;
- if (drm_rotation_90_or_270(pstate->rotation))
+ if (drm_rotation_90_or_270(rotation))
swap(width, height);
/* for planar format */
@@ -3301,6 +3303,7 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
{
struct drm_framebuffer *fb = pstate->fb;
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
+ unsigned int rotation = intel_plane_get_rotation(intel_pstate);
uint32_t src_w, src_h;
uint32_t min_scanlines = 8;
uint8_t plane_bpp;
@@ -3320,7 +3323,7 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
src_h = drm_rect_height(&intel_pstate->base.src) >> 16;
- if (drm_rotation_90_or_270(pstate->rotation))
+ if (drm_rotation_90_or_270(rotation))
swap(src_w, src_h);
/* Halve UV plane width and height for NV12 */
@@ -3334,7 +3337,7 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
else
plane_bpp = fb->format->cpp[0];
- if (drm_rotation_90_or_270(pstate->rotation)) {
+ if (drm_rotation_90_or_270(rotation)) {
switch (plane_bpp) {
case 1:
min_scanlines = 32;
@@ -3568,6 +3571,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
struct drm_plane_state *pstate = &intel_pstate->base;
struct drm_framebuffer *fb = pstate->fb;
uint32_t latency = dev_priv->wm.skl_latency[level];
+ unsigned int rotation = intel_plane_get_rotation(intel_pstate);
uint_fixed_16_16_t method1, method2;
uint_fixed_16_16_t plane_blocks_per_line;
uint_fixed_16_16_t selected_result;
@@ -3603,13 +3607,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
width = drm_rect_width(&intel_pstate->base.src) >> 16;
height = drm_rect_height(&intel_pstate->base.src) >> 16;
- if (drm_rotation_90_or_270(pstate->rotation))
+ if (drm_rotation_90_or_270(rotation))
swap(width, height);
cpp = fb->format->cpp[0];
plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate, intel_pstate);
- if (drm_rotation_90_or_270(pstate->rotation)) {
+ if (drm_rotation_90_or_270(rotation)) {
int cpp = (fb->format->format == DRM_FORMAT_NV12) ?
fb->format->cpp[1] :
fb->format->cpp[0];
@@ -208,7 +208,7 @@ skl_update_plane(struct drm_plane *drm_plane,
u32 plane_ctl;
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
u32 surf_addr = plane_state->main.offset;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
u32 stride = skl_plane_stride(fb, 0, rotation);
int crtc_x = plane_state->base.dst.x1;
int crtc_y = plane_state->base.dst.y1;
@@ -341,7 +341,7 @@ vlv_update_plane(struct drm_plane *dplane,
enum plane_id plane_id = intel_plane->id;
u32 sprctl;
u32 sprsurf_offset, linear_offset;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->base.dst.x1;
int crtc_y = plane_state->base.dst.y1;
@@ -486,7 +486,7 @@ ivb_update_plane(struct drm_plane *plane,
enum pipe pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
u32 sprsurf_offset, linear_offset;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->base.dst.x1;
int crtc_y = plane_state->base.dst.y1;
@@ -624,7 +624,7 @@ ilk_update_plane(struct drm_plane *plane,
int pipe = intel_plane->pipe;
u32 dvscntr, dvsscale;
u32 dvssurf_offset, linear_offset;
- unsigned int rotation = plane_state->base.rotation;
+ unsigned int rotation = intel_plane_get_rotation(plane_state);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->base.dst.x1;
int crtc_y = plane_state->base.dst.y1;
@@ -748,6 +748,7 @@ intel_check_sprite_plane(struct drm_plane *plane,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->base.fb;
+ unsigned int rotation = intel_plane_get_rotation(state);
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
@@ -802,8 +803,7 @@ intel_check_sprite_plane(struct drm_plane *plane,
* coordinates and sizes. We probably need some way to decide whether
* more strict checking should be done instead.
*/
- drm_rect_rotate(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
+ drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation);
hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(hscale < 0);
@@ -844,7 +844,7 @@ intel_check_sprite_plane(struct drm_plane *plane,
drm_rect_height(dst) * vscale - drm_rect_height(src));
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
+ rotation);
/* sanity check to make sure the src viewport wasn't enlarged */
WARN_ON(src->x1 < (int) state->base.src_x ||
On some (Bay Trail) devices the LCD panel is mounted upside-down. This commit uses the code to read back the initial rotation of the primary plane in get_initial_plane_config from Ville Syrjala's "drm/fb-helper: Inherit rotation wip" patch and when re-using the initial fb it stores that in intel_crtc.initial_rotation. It adds an intel_plane_get_rotation helper which combines this initial_rotation with any rotation requested by userspace and uses this in all places which look at a planes rotation, thus transparently dealing with upside-down LCD panels without requiring any user-space or fbcon changes. This fixes the kernel boot messages switching from being shown the right way up in efifb to being shown upside down as soon as a native kms driver loads, as well as any graphics displayed by userspace being upside-down. Note this only deals with upside-down LCD panels / 180 degrees rotation as the hardware in question only supports 180 degrees rotation in hardware. The one model known which has a panel mounted with 90/270 degrees rotation will need to be fully dealt with in userspace, even the firmware boot screen / menus are rotated 90 degrees on this one and there simply is nothing the kernel can do about this. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/gpu/drm/i915/intel_atomic_plane.c | 7 +-- drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_drv.h | 32 +++++++++++++ drivers/gpu/drm/i915/intel_fbc.c | 2 +- drivers/gpu/drm/i915/intel_pm.c | 16 ++++--- drivers/gpu/drm/i915/intel_sprite.c | 14 +++--- 6 files changed, 113 insertions(+), 38 deletions(-)